Photolysis Primary Products of Alkylcobaloximes Controlled by the Cobalt−Carbon Bond Strength

Alkene Synthesis by Photocatalytic Chemoenzymatically Compatible Dehydrodecarboxylation of Carboxylic Acids and Biomass

Direct conversion of renewable biomass and bioderived chemicals to valuable synthetic intermediates for organic synthesis and materials science applications by means of mild and chemoselective catalytic methods has largely remained elusive. Development of artificial catalytic systems that are compatible with enzymatic reactions provides a synergistic solution to this enduring challenge by leveraging previously unachievable reactivity and selectivity modes. We report herein a dual catalytic dehydrodecarboxylation reaction that is enabled by a crossover of the photoinduced acridine-catalyzed O-H hydrogen atom transfer (HAT) and cobaloxime-catalyzed C-H-HAT processes. The reaction produces a variety of alkenes from readily available carboxylic acids. The reaction can be embedded in a scalable triple-catalytic cooperative chemoenzymatic lipase-acridine-cobaloxime process that allows for direct conversion of plant oils and biomass to long-chain terminal alkenes, precursors to bioderived polymers.

Synthesis and Characterization of Chloridobis(dimethylglyoximato)4-(2-ferrocenylvinyl)pyridinecobalt(III): A New Heterobinuclear Cobaloxime

The synthesis of a new heterobinuclear cobaloxime with 4-(2-ferrocenylvinyl)pyridine, fcvpy, is reported. The complex [CoCl(dmgH)2(fcvpy)], where dmgH2is dimethylglyoxime and dmgH is dimethylglyoximato, has been characterized by1H-NMR, UV-Vis, cyclic voltammetry, and elemental analysis. The cyclic voltammogram of this complex shows a fc/fc+reversible wave at +0.58 V versus Ag/AgCl, one irreversible wave,Epc= −0.54 V versus Ag/AgCl, assigned to the reduction of Co(III) to Co(II), and two quasireversible processes at −1.02 V and −1.10 V versus Ag/AgCl associated with the reduction of Co(II). The complex showed ferrocene-ligand charge transfer bands at 334 nm and 505 nm. TDDFT/B3LYP/6-31G(d) calculations support this assignation.

A novel ruthenium(II)-cobaloxime supramolecular complex for photocatalytic H2 evolution: synthesis, characterisation and mechanistic studies

We report the synthesis and characterization of novel mixed-metal binuclear ruthenium(II)-cobalt(II) photocatalysts for hydrogen evolution in acidic acetonitrile. First, 2-(2'-pyridyl)benzothiazole (pbt), 1, was reacted with RuCl(3)·xH(2)O to produce [Ru(pbt)(2)Cl(2)]·0.25CH(3)COCH(3), 2, which was then reacted with 1,10-phenanthroline-5,6-dione (phendione), 3, in order to produce [Ru(pbt)(2)(phendione)](PF(6))(2)·4H(2)O, 4. Compound 4 was then reacted with 4-pyridinecarboxaldehyde in order to produce [Ru(pbt)(2)(L-pyr)](PF(6))(2)·9.5H(2)O, 5 (where L-pyr = (4-pyridine)oxazolo[4,5-f]phenanthroline). Compound 5 was then reacted with [Co(dmgBF(2))(2)(H(2)O)(2)] (where dmgBF(2) = difluoroboryldimethylglyoximato) in order to produce the mixed-metal binuclear complex, [Ru(pbt)(2)(L-pyr)Co(dmgBF(2))(2)(H(2)O)](PF(6))(2)·11H(2)O·1.5CH(3)COCH(3), 6. [Ru(Me(2)bpy)(2)(L-pyr)Co(dmgBF(2))(2)(OH(2))](PF(6))(2), 7 (where Me(2)bpy = 1,10-phenanthroline, 4,4'-dimethyl-2,2'-bipyridine) and [Ru(phen)(2)(L-pyr)Co(dmgBF(2))(2)(OH(2))](PF(6))(2), 8 were also synthesised. All complexes were characterized by elemental analysis, ESI MS, HRMS, UV-visible absorption, (11)B, (19)F, and (59)Co NMR, ESR spectroscopy, and cyclic voltammetry, where appropriate. Photocatalytic studies carried out in acidified acetonitrile demonstrated constant hydrogen generation longer than a 42 hour period as detected by gas chromatography. Time resolved spectroscopic measurements were performed on compound 6, which proved an intramolecular electron transfer from an excited Ru(II) metal centre to the Co(II) metal centre via the bridging L-pyr ligand. This resulted in the formation of a cobalt(I)-containing species that is essential for the production of H(2) gas in the presence of H(+) ions. A proposed mechanism for the generation of hydrogen is presented.

The hydrogen catalyst cobaloxime: a multifrequency EPR and DFT study of cobaloxime's electronic structure

Solar fuels research aims to mimic photosynthesis and devise integrated systems that can capture, convert, and store solar energy in the form of high-energy molecular bonds. Molecular hydrogen is generally considered an ideal solar fuel because its combustion is essentially pollution-free. Cobaloximes rank among the most promising earth-abundant catalysts for the reduction of protons to molecular hydrogen. We have used multifrequency EPR spectroscopy at X-band, Q-band, and D-band combined with DFT calculations to reveal electronic structure and establish correlations among the structure, surroundings, and catalytic activity of these complexes. To assess the strength and nature of ligand cobalt interactions, the BF(2)-capped cobaloxime, Co(dmgBF(2))(2), was studied in a variety of different solvents with a range of polarities and stoichiometric amounts of potential ligands to the cobalt ion. This allows the differentiation of labile and strongly coordinating axial ligands for the Co(II) complex. Labile, or weakly coordinating, ligands such as methanol result in larger g-tensor anisotropy than strongly coordinating ligands such as pyridine. In addition, a coordination number effect is seen for the strongly coordinating ligands with both singly ligated LCo(dmgBF(2))(2) and doubly ligated L(2)Co(dmgBF(2))(2) . The presence of two strongly coordinating axial ligands leads to the smallest g-tensor anisotropy. The relevance of the strength of the axial ligand(s) to the catalytic efficiency of Co(dmgBF(2))(2) is discussed. Finally, the influence of molecular oxygen and formation of Co(III) superoxide radicals LCo(dmgBF(2))(2)O(2)(•) is studied. The experimental results are compared with a comprehensive set of DFT calculations on Co(dmgBF(2))(2) model systems with various axial ligands. Comparison with experimental values for the "key" magnetic parameters such as g-tensor and (59)Co hyperfine coupling tensor allows the determination of the conformation of the axially ligated Co(dmgBF(2))(2) complexes. The data presented here are vital for understanding the influence of solvent and ligand coordination on the catalytic efficiency of cobaloximes.

Organometallic Complexes as Hole-Transporting Materials in Organic Light-Emitting Diodes

The use of metal complexes fac-tris(1-phenylpyrazolato-N,C(2)('))cobalt(III) [fac-Co(ppz)(3)], fac-tris(2-phenylpyridinato-N,C(2)(') cobalt(III) [fac-Co(ppy)(3)], and [tris[2-((pyrrole-2-ylmethylidene)amino)ethyl]amine]gallium(III) [Ga(pma)] as materials for hole-transporting layers (HTL) in organic light-emitting diodes (OLEDs) is reported. Co(ppz)(3) and Co(ppy)(3) were prepared by following literature procedures and isolated as mixtures of facial (fac) and meridional (mer) isomers. The more stable fac isomers were separated from the unstable mer forms via column chromatography and thermal gradient sublimation. Crystals of fac-Co(ppz)(3) are monoclinic, space group P2(1)/c, with a = 13.6121(12) A, b = 15.5600(12) A, c = 22.9603(17) A, beta = 100.5 degrees, V = 4781.3(7) A(3), and Z = 8. [Tris[2-((pyrrol-2-ylmethylidene)amino)ethyl]amine]gallium [Ga(pma)] was prepared by the reaction of gallium(III) nitrate with the pmaH(3) ligand precursor in methanol. Ga(pma) crystallizes in the cubic space group I3d with cell parameters a = 20.2377(4) A, b = 20.2377(4) A, c = 20.2377(4) A, beta = 90.0 degrees, V = 8288.6(3) A(3), and Z = 16. These cobalt and gallium complexes are pale colored to colorless solids, with optical energy gaps ranging 2.6-3.36 eV. A two-layer HTL/ETL (ETL = electron-transporting layer) device structure using fac-Co(ppz)(3) and fac-Co(ppy)(3) as the HTL does not give efficient electroluminescence. However, the introduction of a thin layer of a hole-transporting material (N,N'-bis(1-naphthyl)-N,N'-diphenylbenzidine, NPD) as an energy "stair-step" and electron/exciton-blocker dramatically improves the device performance. Both fac-Co(ppz)(3) and fac-Co(ppy)(3) devices give external quantum efficiencies higher than 1.0%, with brightness 5000 and 7000 Cd/m(2) at 10 V, respectively. Ga(pma) also functions as an efficient interface layer, giving device performances very similar to those of analogous devices using NPD as the interface layer. Stability tests have been carried out for Co(ppz)(3)/NPD/Alq(3) and Co(ppy)(3)/NPD/Alq(3) devices. While fac-Co(ppy)(3) gave stable OLEDs, the fac-Co(ppz)(3)-based devices had very short lifetimes. On the basis of the experimental results of chemical oxidation of fac-Co(ppz)(3), the major cause for the fast decay of the fac-Co(ppz)(3) device is proposed to be the decomposition of fac-Co(ppz)(3)(+) in the HTL layer during the device operation.