Determination of the Adipic Acid Solubility Curve in Acetone by Using ATR-FTIR and Heat Flow Calorimetry

Effects of Solvent Polarity on the Reaction of Aldehydes and Ketones with a Hydrazide-Bound Scavenger Resin

Polymer-supported reagents have been extensively studied and used in various applications, such as condensation reactions and multiple component reactions. This paper examines the reactions between a solid-functionalized resin, named Amb15-Iso, and aldehydes and ketones that have been solubilized in different solvents. The reactions between these molecules and a hydrazide (isoniazid) in both neutral and acidic media were also studied. The results showed that the solvent polarity influenced the kinetics of the reaction and the yields of carbonyl compounds that were captured by the resin, particularly, for less-reactive molecules. The reactions using the resin were faster than those using free isoniazid in solution, likely because the acidic sites remaining in the resin can catalyze the reaction, increasing the rate of capture. A high dependence on the presence of acidic compounds and the rate of the reaction was observed, in which trifluoroacetic acid was used to catalyze the reaction between the tested molecules and isoniazid in solution. The differential reactivities of the examined ketones and aldehydes in these condensation reactions demonstrate that the resin can provide selective criteria, preferentially scavenging aldehydes from solution. While benzaldehyde reacted quite quickly with the resin, acetophenone barely had any reaction and remained in solution.

Automated solubility and crystallization analysis of non-UV active compounds: integration of evaporative light scattering detection (ELSD) and robotic sampling

The integration of high-performance liquid chromatography-evaporative light scattering detection with robotic sampling allows for the acquisition of reliable and data-rich solubility and crystallization profiles of minimally- or non-UV active compounds in an automated manner.

Microscale Solubility Measurements of Matrix-Assisted Laser Desorption-Ionization (MALDI) Matrices Using Attenuated Total Reflection (ATR) Fourier Transform Infrared Spectroscopy (FT-IR) Coupled with Partial Least Squares (PLS) Analysis

In this work an attenuated total reflection Fourier transform infrared (FT-IR) absorption based method is used to measure the solubility of two matrix-assisted laser desorption-ionization (MALDI) matrices in a few pure solvents and mixtures of acetonitrile and water using low microliter amounts of solution. Results from a method that averages the values obtained from multiple calibration curves created by manual peak picking are compared to those predicted using a partial least squares (PLS) chemometrics approach. The PLS method provided solubility values that were in good agreement with the manual method with significantly greater ease of analysis. As a test, the solubility of adipic acid in acetone was measured using the two methods of analysis, and the values are in good agreement with solubility values reported in literature. The solubilities of the MALDI matrices α-cyano-4-hydroxy cinnamic acid (CHCA) and sinapinic acid (SA) were measured in a series of mixtures made from acetonitrile (ACN) and water; surprisingly, the results show a highly nonlinear trend. While both CHCA and SA show solubility values of less than 10 mg/mL in the pure solvents, the solubility value for SA increases to 56.3 mg/mL in a 75:25 v/v ACN:water mixture. This can have a significant effect on the matrix-to-analyte ratios in the MALDI experiment when sample protocols call for preparation of a saturated solution of the matrix in the chosen solvent system.

Application of In-Line Mid-Infrared (MIR) Spectroscopy Coupled with Calorimetry for the Determination of the Molar Enthalpy of Reaction between Ammonium Chloride and Sodium Nitrite

The reaction between ammonium chloride and sodium nitrite has been known for its application as a source of heat because of its large enthalpy of reaction, for which it has been used by the oil industry. There have been no known calorimetric studies for the experimental determination of its molar enthalpy of reaction, which is necessary in order to predict the limits achieved for up-scale applications. Attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) and reaction calorimetry were used to determine this value by using a simple methodology. Both techniques were used concomitantly as a source of information regarding the time-dependent moles converted (Δn) and the amount of exchanged heat (ΔH). The molar enthalpy of reaction was calculated to be -74 ± 4 kcal mol(-1). The percentage between the confidence interval and the calculated value was 5.4%, which shows that the methodology was precise. After the determination of the molar enthalpy of reaction, it was proved that the ATR FT-IR alone was able to be used as a substitute for the reaction calorimetry technique, in which the IR signal is converted to the heat information, presenting as an easier technique for the monitoring of the heat released by this system for future applications.