Multi-Kilo Delivery of AMG 925 Featuring a Buchwald–Hartwig Amination and Processing with Insoluble Synthetic Intermediates

Rapid Aminations of Functionalized Aryl Fluorosulfates in Water

Aryl fluorosulfates of varying complexities have been used in amination reactions in water using a new Pd oxidative addition complex (OAC-1) developed specifically to match the needs of the fine chemicals industry, not only in terms of functional group tolerance, but also reflecting time considerations associated with these important C-N couplings. Also especially noteworthy is that they replace both PFAS-related triflates and nonaflates, which are today out of favor due to recent government regulations. The new complex based on the BippyPhos ligand is used at low loadings and under aqueous micellar conditions. Moreover, it is easily prepared and stable to long term storage. DFT calculations on the OAC precatalyst compare well with the X-ray structure of the crystals with π-complexation to the aromatic system of the ligand and also confirm the NMR data showing a mixture of conformers in solution that differ from the X-ray structure in rotation of the phenyl and t-butyl ligand substituents. An extensive variety of coupling partners, including pharmaceutically relevant APIs, readily participate under mild and environmentally responsible reaction conditions.

Ubiquitous Role of Phosphine-Based Water-Soluble Ligand in Promoting Catalytic Reactions in Water

Catalysis has been at the forefront of the developments that has revolutionised synthesis and provided the impetus in the discovery of platform technologies for efficient C-C or C-X bond formation. Current environmental situation however, demands a change in strategy with catalysis being promoted more in solvents that are benign (Water) and for that the development of hydrophilic ligands (especially phosphines) is a necessity which could promote catalytic reactions in water, allow recyclability of the catalytic solutions and make it possible to isolate products using column-free techniques that involve lesser usage of hazardous organic solvents. In this review, we therefore critically analyse such catalytic processes providing examples that do follow the above-mentioned parameter.

Ligated Pd-Catalyzed Aminations of Aryl/Heteroaryl Halides with Aliphatic Amines under Sustainable Aqueous Micellar Conditions

Sustainable technology for constructing Pd-catalyzed C-N bonds involving aliphatic amines is reported. A catalytic system that relies on low levels of recyclable precious metal, a known and commercially available ligand, and a recyclable aqueous medium are combined, leading to a newly developed procedure. This new technology can be used in ocean water with equal effectiveness. Applications involving highly challenging reaction partners constituting late-stage functionalization are documented, as is a short but efficient synthesis of the drug naftopidil. Comparisons with existing aminations highlight the many advances being offered.

Nanoparticles as Heterogeneous Catalysts for ppm Pd-Catalyzed Aminations in Water

A general protocol employing heterogeneous catalysis has been developed that enables ppm of Pd-catalyzed C-N cross-coupling reactions under aqueous micellar catalysis. A new nanoparticle catalyst containing specifically ligated Pd, in combination with nanoreactors composed of the designer surfactant Savie, a biodegradable amphiphile, catalyzes C-N bond formations in recyclable water. A variety of coupling partners, ranging from highly functionalized pharmaceutically relevant APIs to educts from the Merck Informer Library, readily participate under these environmentally responsible, sustainable reaction conditions. Other key features associated with this report include the low levels of residual Pd found in the products, the recyclability of the aqueous reaction medium, the use of ocean water as an alternative source of reaction medium, options for the use of pseudohalides as alternative reaction partners, and associated low E factors. In addition, an unprecedented 5-step, one-pot sequence is presented, featuring several of the most widely used transformations in the pharmaceutical industry, suggesting potential industrial applications.

Discovery of 2-Aminopyrimidine Derivatives as Potent Dual FLT3/CHK1 Inhibitors with Significantly Reduced hERG Inhibitory Activities

FLT3 inhibitors as single agents have limited effects because of acquired and adaptive resistance and the cardiotoxicity related to human ether-a-go-go-related gene (hERG) channel blockade further impedes safe drugs to the market. Inhibitors having potential to overcome resistance and reduce hERG affinity are highly demanded. Here, we reported a dual FLT3/CHK1 inhibitor 18, which displayed potencies to overcome varying acquired resistance in BaF3 cells with FLT3-TKD and FLT3-ITD-TKD mutations. Moreover, 18 displayed high selectivity over c-KIT more than 1700-fold and greatly reduced hERG affinity, with an IC50 value of 58.4 μM. Further mechanistic studies demonstrated 18 can upregulate p53 and abolish the outgrowth of adaptive resistant cells. In the in vivo studies, 18 demonstrated favorable PK profiles and good safety, suppressed the tumor growth in the MV-4-11 cell inoculated mouse xenograft model, and prolonged the survival in the Molm-13 transplantation model, supporting its further development.

Room-Temperature Cu-Catalyzed Amination of Aryl Bromides Enabled by DFT-Guided Ligand Design

Ullmann-type C-N coupling reactions represent an important alternative to well-established Pd-catalyzed approaches due to the differing reactivity and the lower cost of Cu. While the design of anionic Cu ligands, particularly those by Ma, has enabled the coupling of various classes of aryl halides and alkyl amines, most methods require conditions that can limit their utility on complex substrates. Herein, we disclose the development of anionic N1,N2-diarylbenzene-1,2-diamine ligands that promote the Cu-catalyzed amination of aryl bromides under mild conditions. Guided by DFT calculations, these ligands were designed to (1) increase the electron density on Cu, thereby increasing the rate of oxidative addition of aryl bromides, and (2) stabilize the active anionic CuI complex via a π-interaction. Under optimized conditions, structurally diverse aryl and heteroaryl bromides and a broad range of alkyl amine nucleophiles, including pharmaceuticals bearing multiple functional groups, were efficiently coupled at room temperature. Combined computational and experimental studies support a mechanism of C-N bond formation that follows a catalytic cycle akin to the well-explored Pd-catalyzed variants. Modification of the ligand structure to include a naphthyl residue resulted in a lower energy barrier to oxidative addition, providing a 30-fold rate increase relative to what is seen with other ligands. Collectively, these results establish a new class of anionic ligands for Cu-catalyzed C-N couplings, which we anticipate may be extended to other Cu-catalyzed C-heteroatom and C-C bond-forming reactions.

La-Catalyzed Decarbonylation of Formamides and Its Applications

Herein we report the first catalytic decarbonylation and decarbonylative hydroamination of formamides without using additives enabled by a redox-neutral rare earth catalyst. The protocol displays complete N-aryl/alkenyl formamide-selectivity, thus providing a wide variety of creative uses of the N-formylation and N-deformylation method and opening up new prospects for minimizing waste and controlling the required selectivity in amine transformation events.

Cu/Mn catalyzed C-N cross coupling reaction of aryl chlorides and amines promoted by PAMAM dendrimer

A bimetallic catalytic combinations of Mn(OAc)2 and Cu(OAc)2 was found to be significantly effective for the Buchwald type C-N cross coupling of arylchlorides and amines. Reaction is highly influenced in the presence of a promoter Poly(amidoamine) (PAMAM) dendrimer which also possesses the advantages of being stabile, non-toxic, biocompatible, non-immunogenic and acts as soluble support for transition metal complex. Although, Mn is low cost and environmentally benign, but it is not fully exploited due to its low intrinsic catalytic activity. Here, the catalytic potential of Mn was drastically increased in the presence of another metal salt (Cu(OAc)2). In bimetallic composition, Mn significantly influences the activity, selectivity and plays a vital role in catalysis. Herein, we have developed a novel, green and economical procedure for the Buchwald type C-N cross coupling of arylchlorides and amines. Presented coupling method works under aerobic and solvent-free conditions and produces an excellent yield of value-added N-arylated or alkylated products.

Room-Temperature Amination of Chloroheteroarenes in Water by a Recyclable Copper(II)-Phosphaadamantanium Sulfonate System

Buchwald-Hartwig amination of chloroheteroarenes has been a challenging synthetic process, with very few protocols promoting this important transformation at ambient temperature. The current report discusses about an efficient copper-based catalytic system (Cu/PTABS) for the amination of chloroheteroarenes at ambient temperature in water as the sole reaction solvent, a combination that is first to be reported. A wide variety of chloroheteroarenes could be coupled efficiently with primary and secondary amines as well as selected amino acid esters under mild reaction conditions. Catalytic efficiency of the developed protocol also promotes late-stage functionalization of active pharmaceutical ingredients (APIs) such as antibiotics (floxacins) and anticancer drugs. The catalytic system also performs efficiently at a very low concentration of 0.0001 mol % (TON = 980,000) and can be recycled 12 times without any appreciable loss in activity. Theoretical calculations reveal that the π-acceptor ability of the ligand PTABS is the main reason for the appreciably high reactivity of the catalytic system. Preliminary characterization of the catalytic species in the reaction was carried out using UV-VIS and ESR spectroscopy, providing evidence for the Cu(II) oxidation state.

Ultrafast amidation of esters using lithium amides under aerobic ambient temperature conditions in sustainable solvents

Using 2-methyl THF as solvent enables efficient and ultrafast amidation of esters by lithium amides at room temperature in air, edging closer towards reaching air- and moisture-compatible polar organometallic chemistry.

Lithium amides constitute one of the most commonly used classes of reagents in synthetic chemistry. However, despite having many applications, their use is handicapped by the requirement of low temperatures, in order to control their reactivity, as well as the need for dry organic solvents and protective inert atmosphere protocols to prevent their fast decomposition. Advancing the development of air- and moisture-compatible polar organometallic chemistry, the chemoselective and ultrafast amidation of esters mediated by lithium amides is reported. Establishing a novel sustainable access to carboxamides, this has been accomplished via direct C–O bond cleavage of a range of esters using glycerol or 2-MeTHF as a solvent, in air. High yields and good selectivity are observed while operating at ambient temperature, without the need for transition-metal mediation, and the protocol extends to transamidation processes. Pre-coordination of the organic substrate to the reactive lithium amide as a key step in the amidation processes has been assessed, enabling the structural elucidation of the coordination adduct [{Li(NPh₂)(O Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> CPh(NMe₂))}₂] (8) when toluene is employed as a solvent. No evidence for formation of a complex of this type has been found when using donor THF as a solvent. Structural and spectroscopic insights into the constitution of selected lithium amides in 2-MeTHF are provided that support the involvement of small kinetically activated aggregates that can react rapidly with the organic substrates, favouring the C–O bond cleavage/C–N bond formation processes over competing hydrolysis/degradation of the lithium amides by moisture or air.

The Buchwald-Hartwig Amination After 25 Years

The Pd-catalyzed coupling of aryl (pseudo)halides and amines is one of the most powerful approaches for the formation of C(sp² )-N bonds. The pioneering reports from Migita and subsequently Buchwald and Hartwig on the coupling of aminostannanes and aryl bromides rapidly evolved into general and practical tin-free protocols with broad substrate scope, which led to the establishment of what is now known as the Buchwald-Hartwig amination. This Minireview summarizes the evolution of this cross-coupling reaction over the course of the past 25 years and illustrates some of the most recent applications of this well-established methodology.

Mechanistic Insight Leads to a Ligand Which Facilitates the Palladium-Catalyzed Formation of 2-(Hetero)Arylaminooxazoles and 4-(Hetero)Arylaminothiazoles

By using mechanistic insight, a new ligand (EPhos) for the palladium-catalyzed C-N cross-coupling between primary amines and aryl halides has been developed. Employing an isopropoxy group at the C3-position favors the C-bound isomer of the ligand-supported palladium(II) complexes and leads to significantly improved reactivity. The use of a catalyst system based on EPhos with NaOPh as a mild homogeneous base proved to be very effective in the formation of 4-arylaminothiazoles and highly functionalized 2-arylaminooxazoles. Previously, these were not readily accessible using palladium catalysis.

Biaryl Phosphine Based Pd(II) Amido Complexes: The Effect of Ligand Structure on Reductive Elimination

Kinetic studies conducted under both catalytic and stoichiometric conditions were employed to investigate the reductive elimination of RuPhos (2-dicyclohexylphosphino-2',6'-diisopropoxybiphenyl) based palladium amido complexes. These complexes were found to be the resting state in Pd-catalyzed cross-coupling reactions for a range of aryl halides and diarylamines. Hammett plots demonstrated that Pd(II) amido complexes derived from electron-deficient aryl halides or electron-rich diarylamines undergo faster rates of reductive elimination. A Hammett study employing SPhos (2-dicyclohexylphosphino-2',6'-dimethoxybiphenyl) and analogues of SPhos demonstrated that electron donation of the "lower" aryl group is key to the stability of the amido complex with respect to reductive elimination. The rate of reductive elimination of an amido complex based on a BrettPhos-RuPhos hybrid ligand (2-(dicyclohexylphosphino)-3,6-dimethoxy-2',6'-diisopropoxybiphenyl) demonstrated that the presence of the 3-methoxy substituent on the "upper" ring of the ligand slows the rate of reductive elimination. These studies indicate that reductive elimination occurs readily for more nucleophilic amines such as N-alkyl anilines, N,N-dialkyl amines, and primary aliphatic amines using this class of ligands.

Dosage delivery of sensitive reagents enables glove-box-free synthesis

Contemporary organic chemists employ a broad range of catalytic and stoichiometric methods to construct molecules for applications in many fields, including material sciences¹, pharmaceuticals^2–5, agrochemicals, and sensors⁶. The potential utility of a synthetic method can be greatly reduced if it relies on the use of air- and/or moisture-sensitive reagents or catalysts. Furthermore, many synthetic chemistry laboratories have numerous containers of partially used reagents that have been spoiled by exposure to the ambient atmosphere. This is exceptionally wasteful from both an environmental and a cost perspective. In this manuscript, we report an encapsulation method through which air- and moisture-sensitive sensitive compounds can be rendered stable and stored on a laboratory bench top. We demonstrate this approach in three contexts, by describing single use capsules that contain all of the reagents (i.e., catalysts, ligands, and bases) necessary for palladium-catalyzed carbon–fluorine^7–9, carbon–nitrogen^10,11, and carbon–carbon¹² bond forming reactions. The strategy described in this paper should be broadly applicable to a wide range of reagents and catalysts and should have the power to be transformative in preparative organic chemistry, particularly for inexperienced chemists. In addition, this approach will reduce the amount of tedious and time-consuming weighing procedures for the synthetic chemist performing these techniques on a large number of substrate combinations.