The Effect of Pressure in Membrane Reactors: Trade-Off in Permeability and Equilibrium Conversion in the Catalytic Reforming of CH4with CO2at High Pressure

Photocatalytic materials and light-driven continuous processes to remove emerging pharmaceutical pollutants from water and selectively close the carbon cycle

Past and present technologies for wastewater purification and future research directions are critically discussed in this review.

Facile synthesis of highly disperse Ni-Co nanoparticles over mesoporous silica for enhanced methane dry reforming

A synergistic approach was made to develop a highly stable and carbon resistant catalyst system based on cobalt and nickel supported over modified mesoporous silica for the dry reforming of methane (DRM). Modified mesoporous silica is prepared by a hydrothermal method, and the total Co & Ni composition is taken at around 5% by using the deposition-precipitation technique. CO2 reforming with methane was performed at 400-800 °C under atmospheric pressure as well as at a pressure of 1 MPa, keeping the CH4/CO2 ratio equal to unity. The catalyst assembly before and after the reaction was thoroughly characterized by a wide range of analytical techniques including N2 physisorption, XRD, TPR, TPO, TPH, XPS, SEM, TEM, elemental mapping, TG-DTG. The physicochemical characterization results confirmed the homogeneous distribution of nanosized metal particles into the hexagonal framework of modified silica, which plays a vital role towards a stronger metal support interaction that renders carbon deposition upon the active metal surface as well as avoids metal sintering at higher temperatures. At the same time, the coexistence of nanosized Co and Ni into the mesopores produced a synergy which provides better stability without any deactivation at high pressure reaction conditions. In situ DRIFT analysis evidenced that the reaction proceeds over these catalysts through an initial pathway in which both methane and carbon dioxide initially dissociate over the metal along with a bifunctional pathway in which methane dissociates over the active metal and carbon dioxide activated over the basic support surface via a formate intermediate. Density Functional Theory (DFT) calculations were also performed and further support the proposed mechanism from DRIFT studies.

Inorganic Membranes: Preparation and Application for Water Treatment and Desalination

Inorganic membrane science and technology is an attractive field of membrane separation technology, which has been dominated by polymer membranes. Recently, the inorganic membrane has been undergoing rapid development and innovation. Inorganic membranes have the advantage of resisting harsh chemical cleaning, high temperature and wear resistance, high chemical stability, long lifetime, and autoclavable. All of these outstanding properties made inorganic membranes good candidates to be used for water treatment and desalination applications. This paper is a state of the art review on the synthesis, development, and application of different inorganic membranes for water and wastewater treatment. The inorganic membranes reviewed in this paper include liquid membranes, dynamic membranes, various ceramic membranes, carbon based membranes, silica membranes, and zeolite membranes. A brief description of the different synthesis routes for the development of inorganic membranes for application in water industry is given and each synthesis rout is critically reviewed and compared. Thereafter, the recent studies on different application of inorganic membrane and their properties for water treatment and desalination in literature are critically summarized. It was reported that inorganic membranes despite their high synthesis cost, showed very promising results with high flux, full salt rejection, and very low or no fouling.