Transformations to the aluminum coordination environment and network polymerization in amorphous aluminosilicates under pressure

The structure of calcium aluminosilicate glasses (CaO)x(Al2O3)y(SiO2)1-x-y with the near tectosilicate compositions x ≃ 0.19 and 1 - x - y ≃ 0.61 or x ≃ 0.26 and 1 - x - y ≃ 0.49 was investigated by in situ high-pressure neutron diffraction and 27Al nuclear magnetic resonance (NMR) spectroscopy. The results show three distinct pressure regimes for the transformation of the aluminum coordination environment from tetrahedral to octahedral, which map onto the deformations observed in the production of permanently densified materials. The oxygen packing fraction serves as a marker for signaling a change to the coordination number of the network forming motifs. For a wide variety of permanently densified aluminosilicates, the aluminum speciation shares a common dependence on the reduced density ρ' = ρ/ρ0, where ρ is the density and ρ0 is its value for the uncompressed material. The observed increase in the Al-O coordination number with ρ' originates primarily from the formation of six-coordinated aluminum Al(VI) species, the fraction of which increases rapidly beyond a threshold ρthr'∼ 1.1. The findings are combined to produce a self-consistent model for pressure-induced structural change. Provided the glass network is depolymerized, one-coordinated non-bridging oxygen atoms are consumed to produce two-coordinated bridging oxygen atoms, thus increasing the network connectivity in accordance with the results from 17O NMR experiments. Otherwise, three-coordinated oxygen atoms or triclusters appear, and their fraction is quantified by reference to the mean coordination number of the silicon plus aluminum species. The impact of treating Al(VI) as a network modifier is discussed.

Pressure dependent structure of amorphous magnesium aluminosilicates: The effect of replacing magnesia by alumina at the enstatite composition

The effect of replacing magnesia by alumina on the pressure-dependent structure of amorphous enstatite was investigated by applying in situ high-pressure neutron diffraction with magnesium isotope substitution to glassy (MgO)0.375(Al2O3)0.125(SiO2)0.5. The replacement leads to a factor of 2.4 increase in the rate-of-change of the Mg-O coordination number with pressure, which increases from 4.76(4) at ambient pressure to 6.51(4) at 8.2 GPa, and accompanies a larger probability of magnesium finding bridging oxygen atoms as nearest-neighbors. The Al-O coordination number increases from 4.17(7) to 5.24(8) over the same pressure interval at a rate that increases when the pressure is above ∼3.5 GPa. On recovering the glass to ambient conditions, the Mg-O and Al-O coordination numbers reduce to 5.32(4) and 4.42(6), respectively. The Al-O value is in accordance with the results from solid-state 27Al nuclear magnetic resonance spectroscopy, which show the presence of six-coordinated aluminum species that are absent in the uncompressed material. These findings explain the appearance of distinct pressure-dependent structural transformation regimes in the preparation of permanently densified magnesium aluminosilicate glasses. They also indicate an anomalous minimum in the pressure dependence of the bulk modulus with an onset that suggests a pressure-dependent threshold for transitioning between scratch-resistant and crack-resistant material properties.

Experimental measurements of the viscosity and melt structure of alkali basalts at high pressure and temperature

Volcanic eruptions are shallow phenomena that represent the final stage of density- and viscosity- driven processes of melt migration from source rocks at upper mantle depths. In this experimental study, we investigated the effect of pressure (0.7–7.0 GPa) and temperature (1335–2000 °C) on the viscosity and the atomic melt structure of a synthetic anhydrous primitive alkaline basalt, an analogue of the pre-eruptive magma that likely feeds the Campi Flegrei Volcanic District at present day. Obtained viscosities (0.5–3.0 Pa s), mobility (0.1–0.4 g cm³ Pa⁻¹ s⁻¹) and ascent velocity (1.5–6.0 m yr⁻¹) are presented to support geochemical and geophysical observations of Campi Flegrei as a critical volcanic district currently undergoing gradual magma recharge at depth.

Liquid structure under extreme conditions: high-pressure x-ray diffraction studies

Under extreme conditions of high pressure and temperature, liquids can undergo substantial structural transformations as their atoms rearrange to minimise energy within a more confined volume. Understanding the structural response of liquids under extreme conditions is important across a variety of disciplines, from fundamental physics and exotic chemistry to materials and planetary science.In situexperiments and atomistic simulations can provide crucial insight into the nature of liquid-liquid phase transitions and the complex phase diagrams and melting relations of high-pressure materials. Structural changes in natural magmas at the high-pressures experienced in deep planetary interiors can have a profound impact on their physical properties, knowledge of which is important to inform geochemical models of magmatic processes. Generating the extreme conditions required to melt samples at high-pressure, whilst simultaneously measuring their liquid structure, is a considerable challenge. The measurement, analysis, and interpretation of structural data is further complicated by the inherent disordered nature of liquids at the atomic-scale. However, recent advances in high-pressure technology mean that liquid diffraction measurements are becoming more routinely feasible at synchrotron facilities around the world. This topical review examines methods for high pressure synchrotron x-ray diffraction of liquids and the wide variety of systems which have been studied by them, from simple liquid metals and their remarkable complex behaviour at high-pressure, to molecular-polymeric liquid-liquid transitions in pnicogen and chalcogen liquids, and density-driven structural transformations in water and silicate melts.

A Practical Review of the Laser-Heated Diamond Anvil Cell for University Laboratories and Synchrotron Applications

In the past couple of decades, the laser-heated diamond anvil cell (combined with in situ techniques) has become an extensively used tool for studying pressure-temperature-induced evolution of various physical (and chemical) properties of materials. In this review, the general challenges associated with the use of the laser-heated diamond anvil cells are discussed together with the recent progress in the use of this tool combined with synchrotron X-ray diffraction and absorption spectroscopy.

The HXD95: a modified Bassett-type hydrothermal diamond-anvil cell for in situ XRD experiments up to 5 GPa and 1300 K

A new diamond-anvil cell apparatus for in situ synchrotron X-ray diffraction measurements of liquids and glasses, at pressures from ambient to 5 GPa and temperatures from ambient to 1300 K, is reported. This portable setup enables in situ monitoring of the melting of complex compounds and the determination of the structure and properties of melts under moderately high pressure and high temperature conditions relevant to industrial processes and magmatic processes in the Earth's crust and shallow mantle. The device was constructed according to a modified Bassett-type hydrothermal diamond-anvil cell design with a large angular opening (θ = 95°). This paper reports the successful application of this device to record in situ synchrotron X-ray diffraction of liquid Ga and synthetic PbSiO3 glass to 1100 K and 3 GPa.

A Paris-Edinburgh Cell for High-Pressure and High-Temperature Structure Studies on Silicate Liquids Using Monochromatic Synchrotron Radiation

A Paris-Edinburgh press combined with a multi-channel collimator assembly has been commissioned at the GeoSoilEnviro Center for Advanced Radiation Sources (GSECARS) beamline for monochromatic X-ray scattering, with an emphasis on studying low-Z liquids, especially silicate liquids at high pressure. The Paris-Edinburgh press is mounted on a general-purpose diffractometer, with a pixel array detector mounted on the detector arm. The incident monochromatic undulator beam with energies up to 60 keV is focused both horizontally and vertically to a beam size about 30 × 30 µm. With this setup, background scattering from the surrounding pressure media is completely removed at 2θ angles above 10° for samples larger than 1.05 mm in diameter. Thirty minutes is typically sufficient to collect robust X-ray scattering signals from a 1.6 mm diameter amorphous silicate sample. Cell assemblies for the standard Paris-Edinburgh anvils have been developed and pressures and temperatures up to 7 GPa and 2300 K, respectively, have been maintained steadily over hours. We have also developed a cupped-toroidal Drickamer anvil to further increase pressure and temperature capabilities. The cupped-toroidal Drickamer anvil combines features of a modified Drickamer anvil and the traditional Paris-Edinburgh anvil. Pressures up to 12 GPa have been generated at temperatures up to 2100 K.

Molten barium titanate: a high-pressure liquid silicate analogue

The structure of molten BaTiO₃ has been measured using laser heating, aerodynamic levitation and a combination of neutron diffraction with Ti isotope substitution, x-ray diffraction and spectroscopy. All measurements indicate a Ti-O coordination of n _TiO  =  4.4(2), far lower than the perovskite or hexagonal crystalline forms. However, n _TiO  >  4 suggests structural analogy with molten silicates at high pressures. We introduce methodology for ascertaining such analogies and demonstrate similarity with molten CaSiO₃ at upper mantle pressures circa 5 GPa. Although some topological differences exist, we propose that planetary melt analogues provide rich insight into important processes relevant to hot exoplanets and Earth's early history.

Networks under pressure: the development of in situ high-pressure neutron diffraction for glassy and liquid materials

The pressure-driven collapse in the structure of network-forming materials will be considered in the gigapascal (GPa) regime, where the development of in situ high-pressure neutron diffraction has enabled this technique to obtain new structural information. The improvements to the neutron diffraction methodology are discussed, and the complementary nature of the results is illustrated by considering the pressure-driven structural transformations for several key network-forming materials that have also been investigated by using other experimental techniques such as x-ray diffraction, inelastic x-ray scattering, x-ray absorption spectroscopy and Raman spectroscopy. A starting point is provided by the pressure-driven network collapse of the prototypical network-forming oxide glasses B2O3, SiO2 and GeO2. Here, the combined results help to show that the coordination number of network-forming structural motifs in a wide range of glassy and liquid oxide materials can be rationalised in terms of the oxygen-packing fraction over an extensive pressure and temperature range. The pressure-driven network collapse of the prototypical chalcogenide glass GeSe2 is also considered where, as for the case of glassy GeO2, site-specific structural information is now available from the method of in situ high-pressure neutron diffraction with isotope substitution. The application of in situ high-pressure neutron diffraction to other structurally disordered network-forming materials is also summarised. In all of this work a key theme concerns the rich diversity in the mechanisms of network collapse, which drive the changes in physico-chemical properties of these materials. A more complete picture of the mechanisms is provided by molecular dynamics simulations using theoretical schemes that give a good account of the experimental results.

Structural change in molten basalt at deep mantle conditions

Silicate liquids play a key part at all stages of deep Earth evolution, ranging from core and crust formation billions of years ago to present-day volcanic activity. Quantitative models of these processes require knowledge of the structural changes and compression mechanisms that take place in liquid silicates at the high pressures and temperatures in the Earth's interior. However, obtaining such knowledge has long been impeded by the challenging nature of the experiments. In recent years, structural and density information for silica glass was obtained at record pressures of up to 100 GPa (ref. 1), a major step towards obtaining data on the molten state. Here we report the structure of molten basalt up to 60 GPa by means of in situ X-ray diffraction. The coordination of silicon increases from four under ambient conditions to six at 35 GPa, similar to what has been reported in silica glass. The compressibility of the melt after the completion of the coordination change is lower than at lower pressure, implying that only a high-order equation of state can accurately describe the density evolution of silicate melts over the pressure range of the whole mantle. The transition pressure coincides with a marked change in the pressure-evolution of nickel partitioning between molten iron and molten silicates, indicating that melt compressibility controls siderophile-element partitioning.

Density-driven structural transformations in network forming glasses: a high-pressure neutron diffraction study of GeO2 glass up to 17.5 GPa

The structure of GeO(2) glass was investigated at pressures up to 17.5(5) GPa using in situ time-of-flight neutron diffraction with a Paris-Edinburgh press employing sintered diamond anvils. A new methodology and data correction procedure were developed, enabling a reliable measurement of structure factors that are largely free from diamond Bragg peaks. Calibration curves, which are important for neutron diffraction work on disordered materials, were constructed for pressure as a function of applied load for both single and double toroid anvil geometries. The diffraction data are compared to new molecular-dynamics simulations made using transferrable interaction potentials that include dipole-polarization effects. The results, when taken together with those from other experimental methods, are consistent with four densification mechanisms. The first, at pressures up to approximately equal 5 GPa, is associated with a reorganization of GeO(4) units. The second, extending over the range from approximately equal 5 to 10 GPa, corresponds to a regime where GeO(4) units are replaced predominantly by GeO(5) units. In the third, as the pressure increases beyond ~10 GPa, appreciable concentrations of GeO(6) units begin to form and there is a decrease in the rate of change of the intermediate-range order as measured by the pressure dependence of the position of the first sharp diffraction peak. In the fourth, at about 30 GPa, the transformation to a predominantly octahedral glass is achieved and further densification proceeds via compression of the Ge-O bonds. The observed changes in the measured diffraction patterns for GeO(2) occur at similar dimensionless number densities to those found for SiO(2), indicating similar densification mechanisms for both glasses. This implies a regime from about 15 to 24 GPa where SiO(4) units are replaced predominantly by SiO(5) units, and a regime beyond ~24 GPa where appreciable concentrations of SiO(6) units begin to form.

High-pressure x-ray diffraction studies on the structure of liquid silicate using a Paris-Edinburgh type large volume press

An experimental setup for high-pressure liquid structure studies with synchrotron x-ray diffraction using the Paris-Edinburgh press has been installed at station 16-BM-B (HPCAT) of the Advanced Photon Source, Argonne National Laboratory. By collecting energy-dispersive data with a synchrotron white beam at various 2θ angles, the present device allows us to obtain the structure factor, S(Q), over a wide range of Q ( = 4πsinθ∕λ) owing to the excellent angular accessibility up to 37° in 2θ and high energy photons well beyond 100 keV. We have successfully collected XRD data on silicate (albite, NaAlSi(3)O(8)) liquids with Q up to ∼22 Å(-1) and pressure up to 5.3 GPa and temperature 1873 K, and obtained the radial distribution function, G(r), with a reasonable resolution. The T-O bond length (where T = Al, Si), which is a fundamental measure of local structure for aluminous silicate consisting of SiO(n) and AlO(n) polyhedra (tetrahedra at 1 atm condition), was found to be slightly shortened to 1.626 Å compared to that of glass at 1 atm. The T-O-T bound angle, which is the linkage of the above polyhedra, is the most responsible for densification. The T-O-T peak in G(r) splits into two peaks, suggesting a differentiation of the bond angle at high-pressure. The present technical development demonstrates that the Paris-Edinburgh press is suitable for studies of silicate liquids under high-pressure conditions.

High-pressure in situ structure measurement of low-Z noncrystalline materials with a diamond-anvil cell by an x-ray diffraction method

We have developed techniques for high-pressure in situ structure measurement of low-Z noncrystalline materials with a diamond-anvil cell (DAC) by an x-ray diffraction method. Since the interaction between low-Z materials and x rays is small and the sample thickness in a DAC is also small, the incoherent scattering from the anvils overwhelms the coherent scattering from the sample at a high-Q range. By using a cubic boron nitride gasket to increase the sample thickness and the energy-dispersive x-ray diffraction method with a slit system to narrow the region from which detected x rays are scattered, we can reduce unfavorable effects of the incoherent scattering from the anvils and correct them accurately. We have successfully measured the structure factor of SiO(2) glass in a DAC over a relatively wide range of Q under high pressure.

Sixfold-coordinated amorphous polymorph of SiO2 under high pressure

We have developed synchrotron x-ray absorption and diffraction techniques for measuring the density and structure of noncrystalline materials at high pressures and have applied them to studying the behavior of SiO2 glass. The density, coordination number, and Si-O bond length at a pressure of 50 GPa were measured to be 4.63 g/cm;{3}, 6.3, and 1.71 A, respectively. Based on the density data measured in this study and the sound velocity data available in the literature, the bulk modulus at 50 GPa was estimated to be 390 GPa, which is consistent with the pressure dependence of the density in the vicinity of 50 GPa. These results, together with the knowledge from our exploratory study, suggest that SiO2 glass behaves as a single amorphous polymorph having a sixfold-coordinated structure at pressures above 40-45 GPa up to at least 100 GPa.

A cubic boron nitride gasket for diamond-anvil experiments

To maximize the thickness of the sample chamber in high-pressure experiments, we have conducted tests and have developed techniques relevant to the cubic boron nitride (c-BN) gasket for diamond-anvil cells. The c-BN gasket provides a sample chamber several times thicker than conventional metal gaskets. We have developed methods to prepare the gasket and to fill the chamber with the sample. By using the c-BN gasket, we have successfully measured x-ray diffraction patterns of SiO2 glass, a low-Z noncrystalline sample, up to 100 GPa.

A molecular dynamics study of densification mechanisms in calcium silicate glasses CaSi2O5 and CaSiO3 at pressures of 5 and 10 GPa

Molecular dynamics is used to obtain models of (CaO)(x)(SiO(2))(1-x) glasses, with compositions CaSi(2)O(5) (x=0.33) and CaSiO(3) (x=0.50), at pressures of 5 and 10 GPa. At 5 GPa there are increases in Ca and Si coordinations for x=0.33, whereas for x=0.50 there is distortion of CaO(N) polyhedra but no substantial change in coordination. At 10 GPa the Ca coordination increases by approximately 20% for x=0.33 and by approximately 10% for x=0.50. This increase is due to increased Ca bonds to bridging oxygens (O(b)), since nonbridging oxygens (O(nb)) are already highly bonded to Ca, and the proportion of O(nb) is decreasing due to changes in the silica network. At 10 GPa there are approximately 20% of fivefold and a few percent of sixfold coordinated Si. Since the new Si-O bonds involve the conversion of O(nb) to O(b), there is a corresponding increase in the network connectivity. The x=0.50 glass is more resistant to deformation because there is less possibility to convert O(nb) to O(b) due to lower Si content. The changes in Ca-O, Si-Ca, and Ca-Ca correlations are predicted to produce changes in the x-ray diffraction structure factor S(Q), including a shift of the first sharp diffraction peak to higher Q values.