Strength of Dry and Wet Quartz in the Low-Temperature Plasticity Regime: Insights From Nanoindentation

At low-temperature and high-stress conditions, quartz deformation is controlled by the kinetics of dislocation glide, that is, low-temperature plasticity (LTP). To investigate the relationship between intracrystalline H₂O content and the yield strength of quartz LTP, we have integrated spherical and Berkovich nanoindentation tests at room temperature on natural quartz with electron backscatter diffraction and secondary-ion mass spectrometry measurements of intracrystalline H₂O content. Dry (<20 wt ppm H₂O) and wet (20-100 wt ppm H₂O) crystals exhibit comparable indentation hardness. Quartz yield strength, which is proportional to indentation hardness, seems to be unaffected by the intracrystalline H₂O content when deformed under room temperature, high-stress conditions. Pre-indentation intracrystalline microstructure may have provided a high density of dislocation sources, influencing the first increments of low-temperature plastic strains. Our results have implications for fault strength at the frictional-viscous transition and during transient deformation by LTP, such as seismogenic loading and post-seismic creep.

Preferred Orientation of Quartz in Metamorphic Rocks from the Bergell Alps

Crystal preferred orientation of 47 samples of quartzite and eight samples of associated marbles from the Bergell Alps have been analyzed with time-of-flight neutron diffraction and EBSD. The results show a clear distinction of texture types for quartzites transformed from Triassic sandstones and quartz layers in gneiss. Textures of Triassic quartzites are overall weak and display a maximum of c-axes perpendicular to the foliation or a crossed girdle perpendicular to the lineation. Pole figures for positive rhombs {10 1 ¯ 1} show a maximum perpendicular to the foliation and negative rhombs {01 1 ¯ 1} generally display a minimum. Based on polycrystal plasticity models this texture type can be attributed to a combination of basal and rhombohedral slip. Asymmetry of the distributions is attributed to simple shear and local strain heterogeneities. The relatively weak texture is partially caused by muscovite limiting dislocation motion and grain growth, as well as adjacent layers of marble that accommodate significant strain. Most quartz layers in gneiss, including mylonites, display a texture with a-axes parallel to the lineation and a c-axis maximum in the intermediate fabric direction. This texture type can be attributed to dominant prismatic slip. Many samples are recrystallized and recrystallization appears to strengthen the deformation texture. The study shows good agreement of neutron diffraction and EBSD. Neutron diffraction data average over larger volumes and maximum pole densities are generally lower and more representative for the bulk material. With EBSD the microstructure and mechanical twinning can be quantified.