The CEC behaviour of several synthetic peptides related to the activin betaA-betaD subunits

Capillary electrochromatography of proteins and peptides

This review summarizes applications of CEC for the analysis of proteins and peptides. This "hybrid" technique is useful for the analysis of a broad spectrum of proteins and peptides and is a complementary approach to liquid chromatographic and capillary electrophoretic analysis. All modes of CEC are described--granular packed columns, monolithic stationary phases as well as open-tubular CEC. Attention is also paid to pressurized CEC and the chip-based platform.

Recent developments in capillary electrophoresis and capillary electrochromatography of peptides

The article gives a comprehensive review on the recent developments in the applications of high-performance capillary electromigration methods, zone electrophoresis, isotachophoresis, isoelectric focusing, affinity electrophoresis, electrokinetic chromatography, and electrochromatography, to analysis, preparation, and physicochemical characterization of peptides. The article presents new approaches to the theoretical description and experimental verification of electromigration behavior of peptides, covers the methodological aspects of capillary electroseparations of peptides, such as rational selection of separation conditions, sample preparation, suppression of peptide adsorption, new developments in individual separation modes, and new designs of detection systems. Several types of applications of capillary electromigration methods to peptide analysis are presented: conventional qualitative and quantitative analysis, purity control, determination in biomatrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid and sequence analysis, and peptide mapping of proteins. Some examples of micropreparative peptide separations are given and capabilities of capillary electromigration techniques to provide important physicochemical characteristics of peptides are demonstrated.

Use of mixed-mode sorbents for the electrochromatographic separation of thrombin receptor antagonistic peptides

In this study, the thrombin receptor antagonistic peptide TRAP-1 and its alanine-scan analogues, TRAP 2-6, have been employed as probes to characterise the performance of C18/SCX mixed-mode capillary electrochromatographic (CEC) columns. It was found that the resolution of this group of peptides could only be achieved in a narrow pH range with phosphate-based running electrolytes. The influence of the running electrolyte composition, e.g. the buffer choice, the ionic strength, the pH and the organic solvent content, on the electroosmotic flow (EOF) of these mixed-mode CEC columns was investigated. In addition, the retention mechanism for this group of peptide probes in the electrochromatographic process was studied by examining the effect of varying the running electrolyte composition. As a result, it can be concluded that the electrochromatographic separation of this set of peptides was mediated by a combination of electrophoretic migration and chromatographic retention involving both hydrophobic as well as ion exchange interactions. By modulating the running electrolyte composition, the hydrophobic or ion exchange components of the interaction process could be made to dominate the chromatographic retention of the peptides. Based on this strategy, a high-resolution separation of six closely related synthetic peptides was demonstrated with this mixed-mode CEC system.

Combined solid-phase extraction and 2D LC–MS for characterization of the neuropeptides in rat-brain tissue

A comprehensive two-dimensional capillary liquid chromatographic (2D LC) method has been established for determination of neuropeptides in rat brain tissue. Rats were exposed to different levels of stress before sacrificing and the aim of this study was to design a powerful separation and detection technique capable of characterizing differences between cerebral neuropeptide expression as a function of stress level. Rat brain samples were homogenized and subjected to clean-up by solid-phase extraction (SPE) on both a reversed-phase (C(18)) and a weak cation-exchange (CBA) cartridge. The samples were divided in two fractions (A and B) depending on retention on the CBA column. Subsequently, 50 microL of the sample were injected on to a strong cation exchanger (SCX) at a mobile phase pH of 3, which enabled preconcentration of positively charged compounds. The trapped compounds were eluted using step gradients of ammonium formate in water-ACN (90:10, v/v). Before enrichment in the second dimension, the eluate from the first dimension was diluted with water containing 0.1% TFA. The compounds eluting from the first dimension were trapped in the second dimension using a dual precolumn system consisting of two short capillary columns packed with Kromasil C(18), 10 microm particles. Subsequently, the trapped compounds were backflushed on to a 10 cm long, 320 microm I.D. analytical column packed with Kromasil C(18) 3.5 microm particles, on which they were efficiently separated. Detection was performed using an ion-trap mass spectrometer (ITMS) in both the MS and the MS-MS mode. Comparison of base-peak chromatograms (BPC) from MS analysis of stressed and non-stressed rats clearly revealed several differences in neuropeptide expression. The MS-MS data obtained combined with Mascot software were employed for peptide identification.

Capillary electrochromatography of peptides and proteins

This review surveys the accomplishments in the separation of peptides and proteins by capillary electrochromatography (CEC) over the last decade. A significant number of research articles have been published on this topic since the last review. Peptide and proteins separations have been carried out in all three formats of CEC, i.e., packed bed, continuous bed and open-tubular (OT) format. In addition to electrophoresis, different chromatographic modes have been successfully exploited with the most prevalent being reversed-phase mode followed by ion-exchange. Although many researchers continue to use model proteins and peptides primarily to evaluate the performance of novel stationary phases some researchers have also applied CEC to the analysis of real-life samples. The potential of CEC to yield complementary information and sometimes a superior separation with respect to established techniques, i.e., microbore HPLC and capillary electrophoresis has been demonstrated. Instrumental modifications in order to facilitate coupling of CEC to mass spectrometry have further upgraded the value of CEC for proteomic analysis. Capillaries are still the separation vehicle of choice for most researchers yet the microfluidic platform is gaining momentum, propelled particularly by its potential for multitasking, e.g., performing different chromatographic modes in series.

On the nature of the forces controlling selectivity in the high performance capillary electrochromatographic separation of peptides

In this minireview, the nature of the forces controlling selectivity in the high performance capillary electrochromatographic (HP-CEC) separation of peptides has been examined. For uncharged and charged peptides, a synergistic interplay occurs in HP-CEC systems between adsorptive/partitioning events and electrokinetically driven motion. Moreover, at high field strengths, both bulk electrophoretic migration and surface electrodiffusion occur. Thus, the migration behavior of peptides in different HP-CEC systems can be rationalized in terms of the combined consequences of these various processes. Moreover, in HP-CEC, the buffer electrolyte interacts with both the peptide analytes and the sorbent as bulk phenomena. These buffer-mediated processes control the solvational characteristics, ionization status and conformational behavior of the peptides as well as regulate the double-layer properties of the sorbent, and the ion flux and electro-osmotic flow characteristics of the HP-CEC system per se. These buffer electrolyte effects mediate mutual interactions between the peptide and the sorbent, irrespective of whether the interaction occurs at the surface of microparticles packed into a capillary, at the surface of a contiguous monolithic structure formed or inserted within the capillary or at the walls of the capillary as is the case with open tubular HP-CEC. Diverse molecular and submolecular forces thus coalesce to provide the basis for the different experimental modes under which HP-CEC can be carried out. As a consequence of this interplay, experimental parameters governing the separation of peptides in HP-CEC can be varied over a wide range of conditions, ensuring numerous options for enhanced selectivity, speed, and resolution of peptides. The focus of the peptide separation examples presented in this minireview has been deliberately restricted to the use of HP-CEC capillaries packed with n-alkyl-bonded silicas or mixed-mode strong ion exchange sorbents, although other types of sorbent chemistries can be employed. From these examples, several conclusions have been drawn related to the use of HP-CEC in the peptide sciences. These observations confirm that variation of a specific parameter, such as the pH or the content of the organic solvent modifier in the buffer electrolyte, simultaneously influences all other physicochemical aspects of the specific HP-CEC separation. Peptide selectivity in HP-CEC thus cannot be fine-tuned solely through the use of single parameter optimization methods. In this context, HP-CEC differs significantly from the analogous reverse phase high performance liquid chromatography (RP-HPLC) procedures with peptides. Rather, more sophisticated multiparameter optimization procedures, involving knowledge of (a) the field strength polarity, (b) its contour and flux characteristics, (c) effects of buffer electrolyte composition and pH, (e) the influence of the temperature, and (f) the impact of the sorbent characteristics, are required if the full capabilities offered by HP-CEC procedures are to be exploited. In this minireview, the HP-CEC migration behavior of several different sets of synthetic peptides has been examined, and general guidelines elaborated from these fundamental considerations to facilitate the interpretation and modulation of peptide selectivity in HP-CEC.