Modeling of structure, quality, and function in the orthodontic patient

Craniofacial and upper airway morphological characteristics associated with the presence and severity of obstructive sleep apnea in Chinese children

Objectives

To identify craniofacial and upper airway morphological characteristics associated with the presence and severity of obstructive sleep apnea (OSA) in children.

Methods

This study consisted of 82 OSA children and 77 controls (age 5-10 years). All subjects underwent cephalograms and were divided into a 5-7 age group and an 8-10 age group. Cephalometric variables were compared between OSA children and controls, and hierarchical regression analysis was performed to examine the relationship between cephalometric variables and OSA severity [expressed by the obstructive apnea-hypopnea index (OAHI)] in different age groups.

Results

Increased A/N ratio, narrowed posterior airway space, decreased SNA and SNB angles, and shortened ramus height were observed among OSA children in different age groups. In the 5-7 age group, the A/N ratio and a lower gonial angle explained 40.0% and 14.7% of the variance in the OAHI, respectively. In the 8-10 age group, the BMI z-score and A/N ratio explained 25.2% and 6.6% of the variance in the OAHI, followed by a lower gonial angle and the hyoid-retrognathion distance (19.1% in total).

Conclusions

Adenoid hypertrophy was a major factor associated with OSA in preschool children, whereas obesity replaced adenoid hypertrophy as the main contributor to OSA in late childhood. Several craniofacial skeletal variables such as the SNB angle, ramus height, lower gonial angle, and hyoid position are also associated with the presence and/or severity of OSA, which could be used to help recognize children at a higher risk for OSA.

Assessment of the Airway Characteristics in Children with Cleft Lip and Palate using Cone Beam Computed Tomography

OBJECTIVE

The aim of our study is to use cone beam computed tomography (CBCT) to assess the dimensional changes in the nasopharyngeal soft-tissue characteristics in children of Indian origin with repaired cleft lip and palate (CLP) and to compare the results with patients with ideal occlusion.

MATERIALS AND METHODS

A sample of 20 children (10 girls, 10 boys) with repaired CLP was selected. Cone beam computed tomography scans were taken to measure the nasopharyngeal airway changes in terms of linear measurements and sagittal cross-sectional areas. Error analysis was performed to prevent systematic or random errors. Independent means t-tests and Pearson correlation analysis were used to evaluate sex differences and the correlations among the variables.

RESULTS

Nasopharyngeal soft-tissue characteristics were different in the control and the study groups. Subjects with repaired CLP had lesser lower aerial width, lower adenoidal width and lower airway width. The upper airway width was also significantly lesser. The retropalatal and the total airway area were significantly greater in the control group.

CONCLUSION

The narrow pharyngeal airway in patients with CLP might result in functional impairment of breathing in patients. Further investigations are necessary to clarify the relationship between pharyngeal structure and airway function in patients with CLP. How to cite this article: Agarwal A, Marwah N. Assessment of the Airway Characteristics in Children with Cleft Lip and Palate using Cone Beam Computed Tomography. Int J Clin Pediatr Dent 2016;9(1):5-9.

Three-dimensional longitudinal changes in craniofacial growth in untreated hemifacial microsomia patients with cone-beam computed tomography

INTRODUCTION

The purpose of this study was to evaluate the concept that the affected and contralateral sides do not grow at the same rate in patients with hemifacial microsomia. Changes in the cranial base, maxilla, mandible, and occlusal plane were evaluated on 3-dimensional images from cone-beam computed tomography data in untreated patients.

METHODS

Six patients were classified as having mandibular Pruzansky/Kaban type I, IIA, or IIB hemifacial microsomia. Cone-beam computed tomography (MercuRay; Hitachi, Tokyo, Japan) scans were taken before orthodontic treatment during both growth and postpuberty periods.

RESULTS

The cranial base as defined by the position of the mastoid process was in a different position between the affected and contralateral control sides. The nasomaxillary length or height was shorter on the affected side for all 6 patients with hemifacial microsomia regardless of its severity, and it grew less than on the contralateral control side in 5 of the 6 patients. The occlusal plane angle became more inclined in 4 of the 6 patients. The mandibular ramus was shorter on the affected side in all patients and grew less on the affected side in 5 of the 6 patients. The mandibular body grew slower, the same, or faster than on the control side.

CONCLUSIONS

The cranial base, position of the condyle, lengths of the condyle and ramus, and positions of the gonial angle and condyle can vary between the affected and contralateral control sides of patients with hemifacial microsomia, with the ramus and nasomaxillary length usually growing slower than they grow on the control side. These results suggest that many factors affect the growth rate of the craniofacial region and, specifically, the mandible in patients with hemifacial microsomia.

Soft-diet feeding after weaning affects behavior in mice: Potential increase in vulnerability to mental disorders

Mastication is one of the most important oral functions, and the period during which mastication is acquired overlaps with the term of rapid development and maturation of the neural systems. In particular, the acquisition period after weaning is related to the potential onset of mental disorders. However, the roles of mastication during this period for brain development remain largely unknown. Therefore, we used a series of standard behavioral analyses, assessment of hippocampal cell proliferation, and the expression of brain-derived neurotrophic factor (BDNF), TrkB, and Akt1 in the hippocampus and frontal cortex of mice to investigate the effects of post-weaning mastication on brain function. We fed 21-day-old C57BL6/J male mice either a hard or a soft diet for 4weeks and conducted a series of standard behavioral tests from 7weeks of age. Further, histological analysis with bromodeoxyuridine was performed to compare hippocampal cell proliferation at 7 and 14weeks of age. Real-time polymerase chain reaction was performed to compare BDNF, TrkB, and Akt1 expression in the hippocampus and frontal cortex of 14-week-old mice. Compared to mice fed a hard diet (HDM), soft-diet mice (SDM) showed behavioral impairments, including decreased home cage activity, increased open field test activity, and deficits in prepulse inhibition. These results were similar to those observed in mouse models of schizophrenia. However, no effects were observed on anxiety-like behaviors or memory/learning tests. Compared to HDM, SDM showed significantly decreased hippocampal cell proliferation and hippocampal BDNF and Akt1 gene expression at 14weeks of age. A soft diet after weaning may have resulted in histological and molecular changes in the hippocampus and influenced outcomes of behavioral tests related to mental disorders. Our findings suggest that soft-diet feeding after weaning may affect both physical and mental development of mice, and may increase vulnerability to mental disorders.

Evaluation of mandibular volume using cone-beam computed tomography and correlation with cephalometric values

OBJECTIVE

To investigate the association between maxillofacial morphology and mandibular bone volume in patients with skeletal malocclusion.

MATERIALS AND METHODS

Subjects were 118 adult Japanese (58 males and 60 females). Skeletal malocclusion was classified, based on cephalometric analysis, into skeletal Classes I (-1° ≤ ANB < 4°), II (ANB ≥ 4°), and III (ANB < -1°). Using cone-beam computed tomography and three-dimensional image analysis software, the dental crowns and mandible were separated, with only the mandible extracted. This was then reconstructed as a three-dimensional model, from which the mandibular volume was measured.

RESULTS

No significant difference in mandibular volume was noted among skeletal Classes I, II, and III, nor was there any significant correlation between mandibular volume and the ANB, SNB, or mandibular plane angles. There was occasional and limited correlation between mandible volume and gonial angle and certain cephalometric distance parameters.

CONCLUSION

We conclude that proper understanding of the three-dimensional maxillofacial morphology requires not only cephalometric radiographic tracings but also high-resolution analysis of the mandibular area, width, and volume.

Three-dimensional analysis of the airway with cone-beam computed tomography

INTRODUCTION

In this study, using a cone-beam computed tomography system, we evaluated the airways of 30 adults.

METHODS

The shapes of the 3-dimensional volume of the airway were analyzed and compared among the subjects by using surface superimposition software techniques.

RESULTS

The airway had the greatest variability in the hypopharynx, in the region below the epiglottis, and above the vocal folds. Moderate variation was apparent at the nares, behind the soft palate, and at the base of the tongue. Conservation of form was seen at the central portion of the nasal airway surrounding the inferior turbinate.

CONCLUSIONS

The potential for comparing the shape of the airway among subjects is possible.

A case report of multidisciplinary treatment of an adult patient with bilateral cleft lip and palate

This is a case report about the successful orthodontic treatment of a bilateral cleft lip and palate patient by using a combination of bone grafting and subsequent prosthodontic rehabilitation. An adult patient with a bilateral cleft lip and palate presented with a concave profile, anterior and lateral crossbite, a markedly deep overbite, and residual bilateral alveolar clefts. His jaw movement patterns were unstable and irregular due to his collapsed bite. Orthodontic treatment with bilateral bone grafting improved his concave profile by downward and backward rotation of the mandible within the freeway space, and optimum occlusion and functionally stable and smooth jaw movements were obtained. After a 6-year retention period, no skeletal relapse could be detected, and his occlusal stability was satisfactory.

Cross-sectional human mandibular morphology as assessed in vivo by cone-beam computed tomography in patients with different vertical facial dimensions

INTRODUCTION

The goal of this study was to look at mandibular cortical bone in live patients using cone-beam computed tomography (CBCT) to determine differences in cortical plate thicknesses and mandibular cross-sectional height and width in patients with different vertical facial dimensions.

METHODS

A total of 111 scanned patients were used. Of these subjects, 43 were included in the average vertical facial dimension group (average face), 34 in the high vertical facial group (long face), and 34 in the low vertical facial group (square short face). Cross-sectional slices of the mandible were developed with the cone-beam scans to evaluate the cortical bone between the dentition at 13 locations. Each section was then measured at 8 sites, which included 1 height and 2 width measures of the cross-sectional area and 5 cortical plate thicknesses. An analysis of variance (ANOVA) with a posthoc Bonferroni statistical analysis was used with a significance level of P  ≤0.0167.

RESULTS

The long-face group had slightly more narrow cortical bone than the other 2 facial groups at a few selected sites of the mandible. The height of the cross-sectional area of the mandible in the long-face group was shorter posteriorly than in the other 2 groups and became greater toward the symphysis.

CONCLUSIONS

Mandibular height and width differed more than cortical bone thickness among the 3 types of subjects with different vertical facial dimensions, but statistically significant differences were evident is some sites for cortical bone thickness.

Evaluating the mandible with cone-beam computed tomography

INTRODUCTION

The purpose of this research was to examine methods for assessing the shape and growth of the mandible 3 dimensionally. Furthermore, 1 method was defined and applied.

METHODS

Thirty mandibles were assessed. An average or mean shape was determined, and the mandibles were ranked quantitatively, by using the root mean square (RMS), according to their variation from the mean. The rankings ranged from mandibles that were small, short, and narrow at the minus-RMS end, to large, tall, and broad at the plus-RMS end. A second analysis provided a method to superimpose a mandible over the average mandible and determine the differences from the average-derived mandible by using a spectrum of colors to indicate changes in a region.

RESULTS

Variations in the mandible were greatest in the condylar heads, coronoid tips, canine-incisor dentoalveolar segment, and chin point.

CONCLUSIONS

The visual images of the 30 segmented mandibles suggest that a new method of classification needs to be developed that extends the original 2-dimensional lateral evaluation to a total 3-dimensional view that provides new relationships, such as the direction of the condylar heads to the ramus and the ratio of the intergonial angle length to the intercondylar head length to define the narrowness of a mandible.

Comparison of cone beam computed tomography imaging with physical measures

OBJECTIVES

The goal of this study was to determine the accuracy of measuring linear distances between landmarks commonly used in orthodontic analysis on a human skull using two cone beam CT (CBCT) systems.

METHODS

Measurements of length were taken using volumetric data from two CBCT systems and were compared with physical measures using a calliper applied to one human adult skull. Landmarks were identified with chromium steel balls embedded at 32 cranial and 33 mandibular landmarks and the linear measures were taken with a digital calliper. The skull was then scanned with two different CBCT systems: the NewTom QR DVT 9000 (Aperio Inc, Sarasota, FL) and the Hitachi MercuRay (Hitachi Medico Technology, Tokyo, Japan). CT data including the landmark point data were threshold segmented using CyberMed's CB Works software (CB Works 1.0, CyberMed Inc., Seoul, Korea). The resulting segmentations were exported from CB Works as VRML (WRL) files to Amira software (Amira 3.1, Mercury Computer Systems GmbH, Berlin, Germany).

RESULTS

The error was small compared with the gold standard of the physical calliper measures for both the NewTom (0.07+/-0.41 mm) and CB MercuRay (0.00+/-0.22 mm) generated data. Absolute error to the gold standard was slightly positive, indicating minor compression relative to the calliper measurement. The error was slightly smaller in the CB MercuRay than in the NewTom, probably related to a broader greyscale range for describing beam attenuation in 12-bit vs 8-bit data.

CONCLUSIONS

The volumetric data rendered with both CBCT systems provided highly accurate data compared with the gold standard of physical measures directly from the skulls, with less than 1% relative error.