Variant insertion element IS1 generates 8-base pair duplications of the target sequence

Interaction of bacteriophage P1 with an epiphytic Pantoea agglomerans strain-the role of the interplay between various mobilome elements

P1 is a model, temperate bacteriophage of the 94 kb genome. It can lysogenize representatives of the Enterobacterales order. In lysogens, it is maintained as a plasmid. We tested P1 interactions with the biocontrol P. agglomerans L15 strain to explore the utility of P1 in P. agglomerans genome engineering. A P1 derivative carrying the Tn9 (cmR) transposon could transfer a plasmid from Escherichia coli to the L15 cells. The L15 cells infected with this derivative formed chloramphenicol-resistant colonies. They could grow in a liquid medium with chloramphenicol after adaptation and did not contain prophage P1 but the chromosomally inserted cmR marker of P1 Tn9 (cat). The insertions were accompanied by various rearrangements upstream of the Tn9 cat gene promoter and the loss of IS1 (IS1L) from the corresponding region. Sequence analysis of the L15 strain genome revealed a chromosome and three plasmids of 0.58, 0.18, and 0.07 Mb. The largest and the smallest plasmid appeared to encode partition and replication incompatibility determinants similar to those of prophage P1, respectively. In the L15 derivatives cured of the largest plasmid, P1 with Tn9 could not replace the smallest plasmid even if selected. However, it could replace the smallest and the largest plasmid of L15 if its Tn9 IS1L sequence driving the Tn9 mobility was inactivated or if it was enriched with an immobile kanamycin resistance marker. Moreover, it could develop lytically in the L15 derivatives cured of both these plasmids. Clearly, under conditions of selection for P1, the mobility of the P1 selective marker determines whether or not the incoming P1 can outcompete the incompatible L15 resident plasmids. Our results demonstrate that P. agglomerans can serve as a host for bacteriophage P1 and can be engineered with the help of this phage. They also provide an example of how antibiotics can modify the outcome of horizontal gene transfer in natural environments. Numerous plasmids of Pantoea strains appear to contain determinants of replication or partition incompatibility with P1. Therefore, P1 with an immobile selective marker may be a tool of choice in curing these strains from the respective plasmids to facilitate their functional analysis.

Bacteriophage recombineering in the lytic state using the lambda red recombinases

Bacteriophages, the historic model organisms facilitating the initiation of molecular biology, are still important candidates of numerous useful or promising biotechnological applications. Development of generally applicable, simple and rapid techniques for their genetic engineering is therefore a validated goal. In this article, we report the use of bacteriophage recombineering with electroporated DNA (BRED), for the first time in a coliphage. With the help of BRED, we removed a copy of mobile element IS1, shown to be active, from the genome of P1vir, a coliphage frequently used in genome engineering procedures. The engineered, IS-free coliphage, P1virdeltaIS, displayed normal plaque morphology, phage titre, burst size and capacity for generalized transduction. When performing head-to-head competition experiments, P1vir could not outperform P1virdeltaIS, further indicating that the specific copy of IS1 plays no direct role in lytic replication. Overall, P1virdeltaIS provides a genome engineering vehicle free of IS contamination, and BRED is likely to serve as a generally applicable tool for engineering bacteriophage genomes in a wide range of taxa.

Identification by subtractive hybridization of a novel insertion sequence specific for virulent strains of Porphyromonas gingivalis

Subtractive hybridization was employed to isolate specific genes from virulent Porphyromonas gingivalis strains that are possibly related to abscess formation. The genomic DNA from the virulent strain P. gingivalis W83 was subtracted with DNA from the avirulent strain ATCC 33277. Three clones unique to strain W83 were isolated and sequenced. The cloned DNA fragments were 885, 369, and 132 bp and had slight homology with only Bacillus stearothermophilus IS5377, which is a putative transposase. The regions flanking the cloned DNA fragments were isolated and sequenced, and the gene structure around the clones was revealed. These three clones were located side-by-side in a gene reported as an outer membrane protein. The three clones interrupt the open reading frame of the outer membrane protein gene. This inserted DNA, consisting of three isolated clones, was designated IS1598, which was 1,396 bp (i.e., a 1,158-bp open reading frame) in length and was flanked by 16-bp terminal inverted repeats and a 9-bp duplicated target sequence. IS1598 was detected in P. gingivalis W83, W50, and FDC 381 by Southern hybridization. All three P. gingivalis strains have been shown to possess abscess-forming ability in animal models. However, IS1598 was not detected in avirulent strains of P. gingivalis, including ATCC 33277. The IS1598 may interrupt the synthesis of the outer membrane protein, resulting in changes in the structure of the bacterial outer membrane. The IS1598 isolated in this study is a novel insertion element which might be a specific marker for virulent P. gingivalis strains.

Cloning and characterization of an IS-like element present in the genome of Brevibacterium lactofermentum ATCC 13869

A repetitive DNA element of the Gram+ Brevibacterium lactofermentum (Bl), cloned by a modification of the subtractive hybridization method, contained a 1.4-kb IS-like element, IS13869, which included an open reading frame (ORF) inside a perfect 26-bp terminal inverted repeat (TIR). An 8-bp direct repeat (DR) was found outside each TIR. The ORF encoded a deduced protein of 436 amino acids (49 380 Da) with extensive similarity to other known transposases of insertion elements of Mycobacterium smegmatis (IS1096). Pseudomonas sp. (tpnA) and Corynebacterium glutamicum (IS31831). Distinct patterns were observed in different strains of Bl by hybridization with a probe internal to IS13869: four copies of IS13869 occurred in the wild type (wt) and R31 strains, but only three of them were observed in a recA derivative of the wt. Analysis by pulsed-field gel electrophoresis suggested that at least one copy of IS13869 had changed its position inside the chromosome during the lineage of a Bl derivative.

Plasmid vectors for selecting IS1-promoted deletions in cloned DNA: sequence analysis of the omega interposon

We have constructed two plasmid vectors which allow selection for in vivo deletions within cloned DNA fragments. The plasmids are derivatives of pBR322 which carry the Escherichia coli rpsL (strA) gene, known to confer a dominant streptomycin (Sm)-sensitivity phenotype to the host cell, and a copy of the IS1 transposable element. Sm-resistant strains that harbor these plasmids display sensitivity to Sm. Spontaneous IS1-promoted deletions across the rpsL gene can be isolated simply by selection for Sm resistance. Hence, nested sets of deletions of a cloned DNA can be obtained and sequenced with an IS1-specific primer. Using this approach, we have determined the complete nucleotide sequence of the omega interposon [Prentki and Krisch, Gene 29 (1984) 303-313].

Four types of IS1 with differences in nucleotide sequence reside in the Escherichia coli K-12 chromosome

The Escherichia coli K-12 chromosome contains six copies of insertion element IS1 at loci is1A-is1F. We determined their nucleotide (nt) sequences and found that they were classified into four types. Two copies of IS1 which flank a chromosomal segment containing the argF gene (IS1B and IS1C) have identical nt sequences. Another identical pair are IS1A and IS1E. Comparison of their nt sequences with the IS1 in plasmid R100 revealed seven nt mismatches for IS1A (or IS1E), two for IS1B (or IS1C), four for IS1D, and 75 for IS1F. The fact that the IS1s flanking the argF segment are identical supports the idea that the segment, together with the particular pair of IS1s, has constituted a composite transposon and transposed after genetic transfer from another bacterial species into E. coli K-12. Duplicated sequences were not observed in the regions flanking each of four copies of IS1, indicating that rearrangements have occurred in these chromosomal regions after IS1 elements had been inserted into several target sites. The four types of IS1 present in the E. coli K-12 chromosome were essentially similar to IS1s in plasmid R100 and in the chromosomes of Shigella strains. This and the above results suggest that they have been transferred horizontally from other Enterobacteriaceae, including Shigella, into E. coli K-12.

Characterization of the defect in the Escherichia coli mutT1 mutator gene

With a probe constructed from the wild-type gene, a DNA fragment containing the entire mutT1 mutator gene was isolated and cloned into pUC18. Nucleotide sequence analysis revealed that the mutator defect was most likely due to an IS1 insertion into the wild-type gene.

Isolation and characterization of IS elements repeated in the bacterial chromosome

Shigella sonnei contains repetitive sequences, including an insertion element IS1, which can be isolated as double-stranded DNA fragments by DNA denaturation and renaturation and by treatment with S1 nuclease. In this paper, we describe a method of cloning the IS1 fragments prepared by the S1 nuclease digestion technique into phage M13mp8 RFI DNA. Several clones contained IS1, usually with a few additional bases. We isolated and characterized five other repetitive sequences using this method. One sequence, 1264 base-pairs in length, had terminal inverted repeats and contained two open reading frames. This sequence, called IS600, showed about 44% sequence homology with IS3 and was repeated more than 20 times in the Sh. sonnei chromosome. Another sequence (named IS629, 1310 base-pairs in length), which was repeated six times, was found also to be related to IS3 and thus IS600. Two other sequences (named IS630 and IS640, 1159 and 1092 base-pairs in length, respectively), which were repeated approximately ten times, had characteristic terminal inverted repeats and contained a large open reading frame coding for a protein. The inverted repeat sequences of IS630 were similar to the sequence at one end of IS200, a Salmonella-specific IS element. The fifth sequence, repeated ten times in Sh. sonnei, had about 98% sequence homology with a portion of IS2. The method described here can be applied to the isolation of IS or iso-IS elements present in any other bacterial chromosome.

Artificial transposable elements in the study of the ends of IS1

We have constructed artificial IS1-based transposons by attaching synthetic oligodeoxynucleotides, corresponding to the sequence of the ends of IS1, to a selectable DNA segment ['omega' fragment; Prentki and Krisch, Gene 29 (1984) 303-313]. These transposons were used to examine the sequence requirements at the ends for IS1 transposition. We show here that a 24- to 28-bp sequence from the left or right ends of IS1 is capable of transposition when present at both ends of the omega fragment in the correct orientation. Transposition activity requires the presence of an intact IS1 in cis on the same plasmid molecule. In trans, however, neither resident genomic copies of IS1, nor copies carried by a compatible, high-copy-number plasmid present in the same cell, complement the artificial transposons efficiently. Transposition frequencies in the presence of a cis-complementing IS1 are, however, similar to those of the naturally occurring IS1-based transposon, Tn9. In addition, transposition results in a 9-bp duplication in the target DNA molecule as is usually the case for insertion of the intact IS1. Using this system, we have obtained evidence indicating that the activity of a synthetic IS1 end is not determined exclusively by its sequence, but can be strongly enhanced by a second, wild-type end used in the transposition event. The data also show that single base pair mutations can exhibit a cumulative effect in reducing transposition activity.

Transposable element IS1 intrinsically generates target duplications of variable length

Target duplication during transposition is one of the characteristics of mobile genetic elements. IS1, a resident insertion element of Escherichia coli K-12, was known to generate a 9-base-pair target duplication, while an IS1 variant, characterized by a nucleotide substitution in one of its terminal inverted repeats, was reported to duplicate 8 base pairs of its target during cointegration. We have constructed a series of transposons flanked by copies of either the normal or the variant IS1. The analysis of their transposition products revealed that transposons with normal termini as well as those with variant termini can intrinsically generate either 9- or 8-base-pair target duplications. We also observed that a normal IS1 from the host chromosome generated an 8-base-pair repeat. The possible relevance of the observation for the understanding of transposition processes and models to explain the variable length of target duplications are discussed.

IS50-mediated inverse transposition: specificity and precision

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.

Insertions of transposable elements in the promoter proximal region of the gene cluster for Escherichia coli H+-ATPase: 8 base pair repeat generated by insertion of IS1

A plasmid pKY159 (Yamaguchi and Yamaguchi 1983) carrying a promoter proximal portion of the gene cluster of the proton-translocating ATPase (H+-ATPase) of Escherichia coli causes growth inhibition of wild-type cells. Insertion of a transposable element in this plasmid released this inhibitory effect. In analyzing this inhibitory effect, we determined the insertion points at the nucleotide-sequence level of transposable elements on 30 independent derivatives of pKY159 . Insertions of IS1, IS5, and gamma delta were found between the promoter and the gene for a possible component of 14,000 daltons of the H+-ATPase. Of 31 insertions, 26 were of IS1 and were located at the same site, indicating that this site is a hotspot for IS1 insertion and that IS1 insertion is much more frequent than that of IS5 or gamma delta in this region. Four different sites for IS1 insertion were found; in two of these an 8 base pair (bp) duplicate of the target sequence ( AAAAACGT and AAACGTTG ) was generated, while in the other two a 9 bp duplicate was found. In all cases in this study the nucleotide sequence of IS1 was the same as that of IS1-K. In the two cases with an 8 bp duplicate in different sites, a common 6 bp sequence ( AAACGT ) was found. These results suggested that generation of the 8 bp duplicate is related to the common sequence rather than a mutation in IS1 suggested by Iida et al. (1981) and also suggested that the essential length of the duplicate is 8 bp or less than 8 bp. A 6 bp sequence ( GTGATG ) homologous to the end portion of IS1 was found at the hotspot , but not at other sites, suggesting that this homology contributed to the high frequency of IS1 insertion.(ABSTRACT TRUNCATED AT 250 WORDS)

Characterization of insertions affecting the expression of the bacterio-opsin gene in Halobacterium halobium

We have determined the sequence of the inverted repeats and duplicated target DNA of the halobacterial insertion elements ISH2 (520 bp), ISH23 (900 bp) and ISH24 (3000 bp) associated with bacterio-opsin (bop) mutants. ISH2 has a perfect 19 bp inverted repeat (3,5), while both ISH23 and ISH24 have imperfect inverted repeats of 29 bp and 14 bp respectively. ISH23 was shown to be highly homologous to ISH50 (6). Variable lengths of duplicated target DNA are found when ISH2 and ISH23 (ISH50) transpose into different sites. A 550 bp DNA insert ("ISH25") reverts the Bop mutation caused by ISH24. "ISH25" lacks typical structural features of a transposable element. "ISH25" and ISH24 are found adjacent to each other upstream of the bop gene. An identical arrangement of "ISH25" and ISH24 is found in the cccDNA of H. halobium NRC817. Comparative sequence analysis of both areas suggests that the translocation of "ISH25" to the bop gene region occurred by a recombination event.

Selective cleavage in the avian retroviral long terminal repeat sequence by the endonuclease associated with the alpha beta form of avian reverse transcriptase

M13 recombinant DNA clones containing a 350-base sequence derived from the EcoRI fragment of two tandemly linked Rous-associated virus 2 (RAV-2) long terminal repeat (LTR) sequences have been used to map reverse transcriptase-associated endonuclease (RT-endonuclease) cleavage sites by primer extension studies. Under appropriate conditions, the alpha beta form of RT-endonuclease (composed of both the alpha and beta subunits) purified from Avian sarcoma virus (Pr-C and B-77 strains) introduces a specific break in the inverted complementary repeat sequence found at the junction of the LTRs. The cleavage sites occur in the same nucleotide sequence in (-) and (+) DNA strands; together they have the potential of generating a 6-base-pair staggered overlap that spans the junction. This supports the notion that the enzyme is involved in viral DNA integration. Other RT-endonuclease sites were analyzed. A second site, which occurs in the lac region of the M13 vector DNA upstream from the unique EcoRI cloning site, bears no apparent sequence homology to the site at the junction of the LTRs. However, it also lies within an inverted complementary repeat and, as is the case for the site in the LTR, the break occurs to the 5' side of the axis of symmetry. Cleavage at this second site is suppressed when the vector contains the RAV-2 LTR insert. Thus, the viral LTR appears to exert a cis effect that can influence a region over 300 base pairs away.

Nucleotide sequence of IS26, a new prokaryotic mobile genetic element

The DNA sequence of a new IS element, the IS26, is 820 bp long and carries 14 bp perfect terminal inverted repeats. Upon integration, IS26 generates an 8 bp duplication of its target sequence. A large open reading frame within IS26 could code for a protein of 234 amino acids. On its reverse strand, IS26 also carries one large open reading frame, 591 bp long, which contains no stop codon within IS26.

An IS15 insertion generates an eight-base-pair duplication of the target DNA

In plasmid pIP1088 the transposable module IS15 is inserted at nucleotide position 1,430 of the vector plasmid pBR322. We have sequenced the termini of the IS15 element, which consists of two perfect inverted repeat sequences, 14 bp long. The sequence is 5'-GGCACTGTTGCAAA . . . TTTGCAACAGTGCC-3'. The integration event results in the duplication of 8 bp of target DNA.

High-frequency spontaneous mutation in the bacterio-opsin gene in Halobacterium halobium is mediated by transposable elements

We have recently characterized a transposable element, ISH1, which inactivates the bacterio-opsin (BO) gene in two purple membrane-deficient (Pum-) mutants of Halobacterium halobium. Examination of nine additional Pum- mutants now shows that in all of these the BO gene has been inactivated by insertion of one of two types of transposable elements. Four Pum- strains contain ISH1 within the BO gene, probably at the same site that we have previously characterized. A second element, ISH2, which is present in four more strains, inserts at multiple sites within the BO coding sequence. Significantly, another Pum- strain contains the ISH2 element 102 nucleotides upstream from the initiator codon for BO. ISH2, which is 520 nucleotides long, is the smallest insertion sequence known. Its sequence has been determined: it is A + T-rich (53%), contains a 19-base-pair inverted repeat at its termini, and, interestingly, duplicates either 10 or 20 base pairs at the target site during insertion. ISH2 is present in multiple copy numbers in the genome and contains several relatively short open reading frames.