Multi-channel seismic imaging of a crustal magma chamber along the East Pacific Rise

Magma-induced tectonics at the East Pacific Rise 9°50'N: Evidence from high-resolution characterization of seafloor and subseafloor

At fast-spreading centers, faults develop within the axial summit trough (AST; 0 to 250 m around the axis) primarily by diking-induced deformation originating from the axial magma lens (AML). The formation of the prominent abyssal-hill-bounding faults beyond the axial high (>2,000 m) is typically associated with the unbending of the lithosphere as it cools and spreads away from the AST. The presence of faults is rarely mapped between these two thermally distinct zones, where the lithosphere is still too hot for the faults to be linked with the process of thermal cooling and outside of the AST where the accretional diking process dominates the ridge axis. Here, we reveal a remarkable vertical alignment between the distinct morphological features of the magma body and the orientation of these faults, by comparison of 3-D seismic imagery and bathymetry data collected at the East Pacific Rise (EPR) 9°50'N. The spatial coincidence and asymmetric nucleation mode of the mapped faults represent the most direct evidence for magmatically induced faulting near the ridge axis, providing pathways for hydrothermalism and magma emplacement, helping to build the crust outside of the AST. The high-resolution seafloor and subsurface images also enable revised tectonic strain estimates, which shows that the near-axis tectonic component of seafloor spreading at the EPR is an order of magnitude smaller than previously thought with close to negligible contribution of lava buried faults to spreading.

Porosity evolution of mafic crystal mush during reactive flow

The emergence of the "mush paradigm" has raised several questions for conventional models of magma storage and extraction: how are melts extracted to form eruptible liquid-rich domains? What mechanism controls melt transport in mush-rich systems? Recently, reactive flow has been proposed as a major contributing factor in the formation of high porosity, melt-rich regions. Yet, owing to the absence of accurate geochemical simulations, the influence of reactive flow on the porosity of natural mush systems remains under-constrained. Here, we use a thermodynamically constrained model of melt-mush reaction to simulate the chemical, mineralogical, and physical consequences of reactive flow in a multi-component mush system. Our results demonstrate that reactive flow within troctolitic to gabbroic mushes can drive large changes in mush porosity. For example, primitive magma recharge causes an increase in the system porosity and could trigger melt channelization or mush destabilization, aiding rapid melt transfer through low-porosity mush reservoirs.

Extensive Sills in the Continental Basement from Deep Seismic Reflection Profiling

Crustal seismic reflection profiling has revealed the presence of extensive, coherent reflections with anomalously high amplitudes in the crystalline crust at a number of locations around the world. In areas of active tectonic activity, these seismic “bright spots” have often been interpreted as fluid magma at depth. The focus in this report is high-amplitude reflections that have been identified or inferred to mark interfaces between solid mafic intrusions and felsic to intermediate country rock. These “frozen sills” most commonly appear as thin, subhorizontal sheets at middle to upper crustal depths, several of which can be traced for tens to hundreds of kilometers. Their frequency among seismic profiles suggest that they may be more common than widely realized. These intrusions constrain crustal rheology at the time of their emplacement, represent a significant mode of transfer of mantle material and heat into the crust, and some may constitute fingerprints of distant mantle plumes. These sills may have played important roles in overlying basin evolution and ore deposition.

Origin of Pumice in Sediments from the Middle Okinawa Trough: Constraints from Whole-Rock Geochemical Compositions and Sr-Nd-Pb Isotopes

Frequent volcanic activity has occurred in the Okinawa Trough (OT) during the late Quaternary, which attracted much attention to the origin of volcanic rocks. Pumice collected from the seafloor has been extensively investigated, whereas few studies paid attention to the pumice in the sediment. The geochemical compositions of pumice preserved in sediments generally provide insight into past volcanic activity and regional magmatism. Here, we present major and trace element compositions and Sr-Nd-Pb isotope data, together with the established age framework for pumice samples recovered from sediment core S9 in the middle OT (MOT) to investigate their possible formation. Compositionally, the S9 pumice samples are dacite and are characterized by relatively higher Sr (87Sr/86Sr = 0.70480–0.70502) and Pb (206Pb/204Pb = 18.321-18.436, 207Pb/204Pb = 15.622–15.624, and 208Pb/204Pb = 38.52–38.63) and lower Nd (143Nd/144Nd = 0.51272–0.51274) isotope compositions than basalts from the MOT. The geochemical compositions of pumice clasts from different layers of core S9 display no temporal variation trends and vary within narrow ranges. On the basis of the geochemical characteristics of S9 pumice samples, we infer that the parent magma of these samples might generate from hybrid magma through an extensive fractional crystallization process. The Indian Ocean MORB-type mantle was first metasomatized by the subducted Philippine Sea sediments to form the primitive magma; then, followed by assimilation of a small amount of lower crustal component occurred in the lower crust. The long-term magmatism and relatively consistent isotopic compositions indicate that a magma chamber might have existed in the lower crust of the MOT between 11.22 and 12.96 cal. ka BP.

The significance of plagioclase textures in mid-ocean ridge basalt (Gakkel Ridge, Arctic Ocean)

Textures and compositions of minerals can be used to infer the physiochemical conditions present within magmatic systems. Given that plagioclase is an abundant phase in many magmatic systems, understanding the link between texture and process is vital. Here, we present a database of textural and compositional data for > 1800 plagioclase crystals in mid-ocean ridge basalt from the Gakkel Ridge (Arctic Ocean) to investigate the physiochemical conditions and processes that govern the formation of plagioclase textures and compositions. The Gakkel basalts have high modal crystal contents (up to 50%). The crystal cargo is complex, with both individual plagioclase and glomerocrysts showing large variations in crystal habit, zoning and resorption. The most common types of zoning are reverse and patchy; we attribute patchy zoning to infilling following either skeletal growth or resorption. Resorption is abundant, with multiple resorption events commonly present in a single crystal, and results from both magmatic recharge and decompression. Periods of strong undercooling, distinct to quench crystallisation, are indicated by matured skeletal crystals and thin normally zoned melt inclusion-rich bands following resorption. Individual samples often contain diverse textural and compositional plagioclase groups. Furthermore, most plagioclase is not in equilibrium with its host melt. Finally, the porous open structures of some glomerocrysts suggest that they represent pieces of entrained disaggregated mush. We interpret this to indicate that the crystal cargo is not generally phenocrystic in origin. Instead, plagioclase crystals that formed in different parts of a mush-dominated plumbing system were entrained into ascending melts. The textures of individual crystals are a function of their respective histories of (under)cooling, magma mixing and decompression. The morphologies of melt inclusion trapped in the plagioclase crystals are associated with specific host crystal textures, suggesting a link between plagioclase crystallisation processes and melt inclusion entrapment. The database of plagioclase presented herein may serve as a template for the interpretation of plagioclase textures in magmatic systems elsewhere.

Consequences of a crystal mush-dominated magma plumbing system: a mid-ocean ridge perspective

Crystal mush is rapidly emerging as a new paradigm for the evolution of igneous systems. Mid-ocean ridges provide a unique opportunity to study mush processes: geophysical data indicate that, even at the most magmatically robust fast-spreading ridges, the magma plumbing system typically comprises crystal mush. In this paper, we describe some of the consequences of crystal mush for the evolution of the mid-ocean ridge magmatic system. One of these is that melt migration by porous flow plays an important role, in addition to rapid, channelized flow. Facilitated by both buoyancy and (deformation-enhanced) compaction, porous flow leads to reactions between the mush and migrating melts. Reactions between melt and the surrounding crystal framework are also likely to occur upon emplacement of primitive melts into the mush. Furthermore, replenishment facilitates mixing between the replenishing melt and interstitial melts of the mush. Hence, crystal mushes facilitate reaction and mixing, which leads to significant homogenization, and which may account for the geochemical systematics of mid-ocean ridge basalt (MORB). A second consequence is cryptic fractionation. At mid-ocean ridges, a plagioclase framework may already have formed when clinopyroxene saturates. As a result, clinopyroxene phenocrysts are rare, despite the fact that the vast majority of MORB records clinopyroxene fractionation. Hence, melts extracted from crystal mush may show a cryptic fractionation signature. Another consequence of a mush-dominated plumbing system is that channelized flow of melts through the crystal mush leads to the occurrence of vertical magmatic fabrics in oceanic gabbros, as well as the entrainment of diverse populations of phenocrysts. Overall, we conclude that the occurrence of crystal mush has a number of fundamental implications for the behaviour and evolution of magmatic systems, and that mid-ocean ridges can serve as a useful template for trans-crustal mush columns elsewhere. This article is part of the Theo Murphy meeting issue 'Magma reservoir architecture and dynamics'.

Mafic tiers and transient mushes: evidence from Iceland

It is well established that magmatism is trans-crustal, with melt storage and processing occurring over a range of depths. Development of this conceptual model was based on observations of the products of magmatism at spreading ridges, including Iceland. Petrological barometry and tracking of the solidification process has been used to show that the Icelandic crust is built by crystallization over a range of depths. The available petrological evidence indicates that most of the active rift zones are not underlain by extensive and pervasive crystal mush. Instead, the microanalytical observations from Iceland are consistent with a model where magmatic processing in the lower crust occurs in sills of decimetric vertical thickness. This stacked sills mode of crustal accretion corresponds to that proposed for the oceanic crust on the basis of ophiolite studies. A key feature of these models is that the country rock for the sills is hot but subsolidus. This condition can be met if the porosity in thin crystal mushes at the margins of the sills is occluded by primitive phases, a contention that is consistent with observations from cumulate nodules in Icelandic basalts. The conditions required for the stabilization of trans-crustal mushes may not be present in magmatic systems at spreading ridges. This article is part of the Theo Murphy meeting issue 'Magma reservoir architecture and dynamics'.

Seismic Detection of a Magma Reservoir beneath Turtle Island of Taiwan by S-Wave Shadows and Reflections

Although surface geology, eruption information and clustering seismicity all suggest Turtle Island (Kueishantao) of northern Taiwan is an active volcano, there was no direct evidence to conclude that magma reservoirs exist beneath it. Even less evidence is available to determine their spatial configuration. If the magma reservoirs are filled by liquids and melt, S-waves are totally reflected and leave behind a shadow, like when passing through the Earth’s outer core. We detect both these S-wave shadows and strong reflections from the surface using earthquakes at different depths and azimuths. These observations identify a km-scale molten-filled volume located beneath Turtle Island. The magmatic nature of the reservoir is supported by the onset of non-double-couple earthquakes with strong CLVD (Compensated Linear Vector Dipole) and ISO (Isotropic) components, which show a tensor crack compatible with some volume changes within the reservoir. Combining these results with two independent 3-D velocity models and aeromagnetic anomalies recorded in Taiwan, a partially-molten ~19% low-velocity volume is estimated in the mid-crust (13–23 km), with spatial uncertainties of ~3 km. The elongated direction approximately follows the strike of the Okinawa trough, indicating that the source of the magma reservoir might be a back-arc opening.

Progress in Deciphering the Controls on the Geochemistry of Fluids in Seafloor Hydrothermal Systems

Over the last four decades, more than 500 sites of seafloor hydrothermal venting have been identified in a range of tectonic environments. These vents represent the seafloor manifestation of hydrothermal convection of seawater through the permeable oceanic basement that is driven by a subsurface heat source. Hydrothermal circulation has fundamental effects on the transfer of heat and mass from the lithosphere to the hydrosphere, the composition of seawater, the physical and chemical properties of the oceanic basement, and vent ecosystems at and below the seafloor. In this review, we compare and contrast the vent fluid chemistry from hydrothermal fields in a range of tectonic settings to assess the relative roles of fluid-mineral equilibria, phase separation, magmatic input, seawater entrainment, and sediment cover in producing the observed range of fluid compositions. We focus particularly on hydrothermal activity in those tectonic environments (e.g., mid-ocean ridge detachment faults, back-arc basins, and island arc volcanoes) where significant progress has been made in the last decade in documenting the variations in vent fluid composition.

Rapid hydrothermal cooling above the axial melt lens at fast-spreading mid-ocean ridge

Axial melt lenses sandwiched between the lower oceanic crust and the sheeted dike sequences at fast-spreading mid-ocean ridges are assumed to be the major magma source of oceanic crust accretion. According to the widely discussed “gabbro glacier” model, the formation of the lower oceanic crust requires efficient cooling of the axial melt lens, leading to partial crystallization and crystal-melt mush subsiding down to lower crust. These processes are believed to be controlled by periodical magma replenishment and hydrothermal circulation above the melt lens. Here we quantify the cooling rate above melt lens using chemical zoning of plagioclase from hornfelsic recrystallized sheeted dikes drilled from the East Pacific at the Integrated Ocean Drilling Program Hole 1256D. We estimate the cooling rate using a forward modelling approach based on CaAl-NaSi interdiffusion in plagioclase. The results show that cooling from the peak thermal overprint at 1000–1050°C to 600°C are yielded within about 10–30 years as a result of hydrothermal circulation above melt lens during magma starvation. The estimated rapid hydrothermal cooling explains how the effective heat extraction from melt lens is achieved at fast-spreading mid-ocean ridges.

Hybrid shallow on-axis and deep off-axis hydrothermal circulation at fast-spreading ridges

Hydrothermal flow at oceanic spreading centres accounts for about ten per cent of all heat flux in the oceans and controls the thermal structure of young oceanic plates. It also influences ocean and crustal chemistry, provides a basis for chemosynthetic ecosystems, and has formed massive sulphide ore deposits throughout Earth's history. Despite this, how and under what conditions heat is extracted, in particular from the lower crust, remains largely unclear. Here we present high-resolution, whole-crust, two- and three-dimensional simulations of hydrothermal flow beneath fast-spreading ridges that predict the existence of two interacting flow components, controlled by different physical mechanisms, that merge above the melt lens to feed ridge-centred vent sites. Shallow on-axis flow structures develop owing to the thermodynamic properties of water, whereas deeper off-axis flow is strongly shaped by crustal permeability, particularly the brittle-ductile transition. About 60 per cent of the discharging fluid mass is replenished on-axis by warm (up to 300 degrees Celsius) recharge flow surrounding the hot thermal plumes, and the remaining 40 per cent or so occurs as colder and broader recharge up to several kilometres away from the axis that feeds hot (500-700 degrees Celsius) deep-rooted off-axis flow towards the ridge. Despite its lower contribution to the total mass flux, this deep off-axis flow carries about 70 per cent of the thermal energy released at the ridge axis. This combination of two flow components explains the seismically determined thermal structure of the crust and reconciles previously incompatible models favouring either shallower on-axis or deeper off-axis hydrothermal circulation.

Primitive layered gabbros from fast-spreading lower oceanic crust

Three-quarters of the oceanic crust formed at fast-spreading ridges is composed of plutonic rocks whose mineral assemblages, textures and compositions record the history of melt transport and crystallization between the mantle and the sea floor. Despite the importance of these rocks, sampling them in situ is extremely challenging owing to the overlying dykes and lavas. This means that models for understanding the formation of the lower crust are based largely on geophysical studies and ancient analogues (ophiolites) that did not form at typical mid-ocean ridges. Here we describe cored intervals of primitive, modally layered gabbroic rocks from the lower plutonic crust formed at a fast-spreading ridge, sampled by the Integrated Ocean Drilling Program at the Hess Deep rift. Centimetre-scale, modally layered rocks, some of which have a strong layering-parallel foliation, confirm a long-held belief that such rocks are a key constituent of the lower oceanic crust formed at fast-spreading ridges. Geochemical analysis of these primitive lower plutonic rocks--in combination with previous geochemical data for shallow-level plutonic rocks, sheeted dykes and lavas--provides the most completely constrained estimate of the bulk composition of fast-spreading oceanic crust so far. Simple crystallization models using this bulk crustal composition as the parental melt accurately predict the bulk composition of both the lavas and the plutonic rocks. However, the recovered plutonic rocks show early crystallization of orthopyroxene, which is not predicted by current models of melt extraction from the mantle and mid-ocean-ridge basalt differentiation. The simplest explanation of this observation is that compositionally diverse melts are extracted from the mantle and partly crystallize before mixing to produce the more homogeneous magmas that erupt.