Feasibility study on retinal vascular bypass surgery in isolated arterially perfused caprine eye model

Stretch-Induced Uncrimping of Equatorial Sclera Collagen Bundles

Stretch-induced collagen uncrimping underlies the nonlinear mechanical behavior of the sclera according to what is often called the process of recruitment. We recently reported experimental measurements of sclera collagen crimp and pressure-induced uncrimping. Our studies, however, were cross-sectional, providing statistical descriptions of crimp with no information on the effects of stretch on specific collagen bundles. Data on bundle-specific uncrimping is necessary to better understand the effects of macroscale input on the collagen microscale and tissue failure. Our goal in this project was to measure bundle-specific stretch-induced collagen uncrimping of sclera. Three goat eyes were cryosectioned sagittally (30 μm). Samples of equatorial sclera were isolated, mounted to a custom uni-axial stretcher and imaged with polarized light microscopy at various levels of clamp-to-clamp stretch until failure. At each stretch level, local strain was measured using image tracking techniques. The level of collagen crimping was determined from the bundle waviness, defined as the circular standard deviation of fiber orientation along a bundle. Eye-specific recruitment curves were then computed using eye-specific waviness at maximum stretch before sample failure to define fibers as recruited. Nonlinear mixed effect models were used to determine the associations of waviness to local strain and recruitment to clamp-to-clamp stretch. Waviness decreased exponentially with local strain (p < 0.001), whereas bundle recruitment followed a sigmoidal curve with clamp-to-clamp stretch (p < 0.001). Individual bundle responses to stretch varied substantially, but recruitment curves were similar across sections and eyes. In conclusion, uni-axial stretch caused measurable bundle-specific uncrimping, with the sigmoidal recruitment pattern characteristic of fiber-reinforced soft tissues.

Feasibility study on robot-assisted retinal vascular bypass surgery in an ex vivo porcine model

PURPOSE

To describe a new robot-assisted surgical system for retinal vascular bypass surgery (RVBS) and to compare the success rate with freehand RVBS.

METHODS

A robot-assisted system for retinal microsurgery was constructed to include two independent robotic arms. A 23-gauge light probe and an intraocular forceps were affixed to the arm end effectors to perform the intraocular manipulation. Harvested porcine eyes were introduced to be established animal models of closed-sky eyeballs after that pars plana vitrectomy using temporary keratoprosthesis was performed by a skilful surgeon. Retinal vascular bypass surgery (RVBS) was performed by an inexperienced ophthalmologist to test the ease of use. A stainless steel wire (45-μm pipe diameter) was used as an artificial vessel. Before RVBS, the wires were prepositioned at the retinal surface of the eyes. The Control group (n = 20) underwent freehand RVBS, and the Experimental group (n = 20) underwent robot-assisted RVBS. To create the simulated bypass, the distal end of the wire was inserted into the selected vessel and advanced ~4 mm away from the optic disc. If successful, then the proximal wire end was inserted and advanced ~2 mm towards the optic disc. The difference in the success rate for the freehand and robot-assisted procedures was analysed by the chi-square test.

RESULTS

The success rate for the freehand RVBS was 5% (1/20 eyes). In contrast, the robot-assisted success rate was 35% (7/20) of eyes (p < 0.05).

CONCLUSION

This study demonstrated the feasibility of robot-assisted RVBS in ex vivo porcine eyes. The robotic system increased the accuracy and stability of manipulation by eliminating freehand tremor, leading to a higher surgical success rate.

Cooperative robot assistant for vitreoretinal microsurgery: development of the RVRMS and feasibility studies in an animal model

PURPOSE

The purpose of the study was to describe the development of a robotic aided surgical system named RVRMS (robotic vitreous retinal microsurgery system) and to evaluate the capability for using it to perform vitreoretinal surgery.

METHODS

The RVRMS was designed and built to include the key components of two independent arms. End-effectors of each arm fix various surgical instruments and perform intraocular manipulation. To evaluate properly the RVRMS, robot-assisted 23-gauge surgical tasks including endolaser for retinal photocoagulation, pars plana vitrectomy (PPV), retinal foreign body removal and retinal vascular cannulation were performed in two different sizes of an animal model. Endolaser was performed in the eye of a living Irish rabbit and the other tasks were done in a harvested porcine eye. For each evaluation, the duration and the successful completion of the task was assessed.

RESULTS

Robot-assisted vitreoretinal operations were successfully performed in nine rabbit eyes and 25 porcine eyes without any iatrogenic complication such as retinal tear or retinal detachment. In the task of using an endolaser, three rows of burns around the induced retinal hole were performed in nine rabbit eyes with half size intervals of laser spots. Nine procine eyes underwent PPV followed by successful posterior vitreous detachment (PVD) induction assisted with triamcinolone acetonide (TA). Nine porcine eyes completed removal of a fine stainless steel wire, which was inserted into prepared retinal tissue. Finally, retinal vascular cannulation with a piece of stainless steel wire (6mm length, 45 μm pipe diameter and one end cut to ∼30° slope) was successfully achieved in seven porcine eyes. The average duration of each procedure was 10.91±1.22 min, 11.68±2.11min, 5.90±0.46 min and 13.5±6.2 min, respectively.

CONCLUSIONS

Maneuverability, accuracy and stability of robot-assisted vitreoretinal microsurgery using the RVRMS were demonstrated in this study. Wider application research of robotic surgery and improvement of a robotic system should be continued.

Real-time three-dimensional Fourier-domain optical coherence tomography video image guided microsurgeries

The authors describe the development of an ultrafast three-dimensional (3D) optical coherence tomography (OCT) imaging system that provides real-time intraoperative video images of the surgical site to assist surgeons during microsurgical procedures. This system is based on a full-range complex conjugate free Fourier-domain OCT (FD-OCT). The system was built in a CPU-GPU heterogeneous computing architecture capable of video OCT image processing. The system displays at a maximum speed of 10 volume/s for an image volume size of 160 × 80 × 1024(X × Y × Z) pixels. We have used this system to visualize and guide two prototypical microsurgical maneuvers: microvascular anastomosis of the rat femoral artery and ultramicrovascular isolation of the retinal arterioles of the bovine retina. Our preliminary experiments using 3D-OCT-guided microvascular anastomosis showed optimal visualization of the rat femoral artery (diameter<0.8 mm), instruments, and suture material. Real-time intraoperative guidance helped facilitate precise suture placement due to optimized views of the vessel wall during anastomosis. Using the bovine retina as a model system, we have performed "ultra microvascular" feasibility studies by guiding handheld surgical micro-instruments to isolate retinal arterioles (diameter ~0.1 mm). Isolation of the microvessels was confirmed by successfully passing a suture beneath the vessel in the 3D imaging environment.