Modes of faulting at mid-ocean ridges

Magma-induced tectonics at the East Pacific Rise 9°50'N: Evidence from high-resolution characterization of seafloor and subseafloor

At fast-spreading centers, faults develop within the axial summit trough (AST; 0 to 250 m around the axis) primarily by diking-induced deformation originating from the axial magma lens (AML). The formation of the prominent abyssal-hill-bounding faults beyond the axial high (>2,000 m) is typically associated with the unbending of the lithosphere as it cools and spreads away from the AST. The presence of faults is rarely mapped between these two thermally distinct zones, where the lithosphere is still too hot for the faults to be linked with the process of thermal cooling and outside of the AST where the accretional diking process dominates the ridge axis. Here, we reveal a remarkable vertical alignment between the distinct morphological features of the magma body and the orientation of these faults, by comparison of 3-D seismic imagery and bathymetry data collected at the East Pacific Rise (EPR) 9°50'N. The spatial coincidence and asymmetric nucleation mode of the mapped faults represent the most direct evidence for magmatically induced faulting near the ridge axis, providing pathways for hydrothermalism and magma emplacement, helping to build the crust outside of the AST. The high-resolution seafloor and subsurface images also enable revised tectonic strain estimates, which shows that the near-axis tectonic component of seafloor spreading at the EPR is an order of magnitude smaller than previously thought with close to negligible contribution of lava buried faults to spreading.

Mid-ocean ridge unfaulting revealed by magmatic intrusions

Mid-ocean ridges (MORs) are quintessential sites of tectonic extension1-4, at which divergence between lithospheric plates shapes abyssal hills that cover about two-thirds of the Earth's surface5,6. Here we show that tectonic extension at the ridge axis can be partially undone by tectonic shortening across the ridge flanks. This process is evidenced by recent sequences of reverse-faulting earthquakes about 15 km off-axis at the Mid-Atlantic Ridge and Carlsberg Ridge. Using mechanical models, we show that shallow compression of the ridge flanks up to the brittle failure point is a natural consequence of lithosphere unbending away from the axial relief. Intrusion of magma-filled fractures, which manifests as migrating swarms of extensional seismicity along the ridge axis, can provide the small increment of compressive stress that triggers reverse-faulting earthquakes. Through bathymetric analyses, we further find that reverse reactivation of MOR normal faults is a widely occurring process that can reduce the amplitude of abyssal hills by as much as 50%, shortly after they form at the ridge axis. This 'unfaulting' mechanism exerts a first-order influence on the fabric of the global ocean floor and provides a physical explanation for reverse-faulting earthquakes in an extensional environment.

Magmatism controls global oceanic transform fault topography

Oceanic transform faults play an essential role in plate tectonics. Yet to date, there is no unifying explanation for the global trend in broad-scale transform fault topography, ranging from deep valleys to shallow topographic highs. Using three-dimensional numerical models, we find that spreading-rate dependent magmatism within the transform domain exerts a first-order control on the observed spectrum of transform fault depths. Low-rate magmatism results in deep transform valleys caused by transform-parallel tectonic stretching; intermediate-rate magmatism fully accommodates far-field stretching, but strike-slip motion induces across-transform tension, producing transform strength dependent shallow valleys; high-rate magmatism produces elevated transform zones due to local compression. Our models also address the observation that fracture zones are consistently shallower than their adjacent transform fault zones. These results suggest that plate motion change is not a necessary condition for reproducing oceanic transform topography and that oceanic transform faults are not simple conservative strike-slip plate boundaries.

Beyond spreading rate: Controls on the thermal regime of mid-ocean ridges

The thermal state of mid-ocean ridges exerts a crucial modulation on seafloor spreading processes that shape ~2/3 of our planet's surface. Standard thermal models treat the ridge axis as a steady-state boundary layer between the hydrosphere and asthenosphere, whose thermal structure primarily reflects the local spreading rate. This framework explains the deepening of axial melt lenses (AMLs)-a proxy for the basaltic solidus isotherm-from ~1 to ~3 km from fast- to intermediate-spreading ridges but fails to account for shallow crustal AMLs documented at slow-ultraslow spreading ridges. Here, we show that these can be explained by a numerical model that decouples the potentially transient ridge magma supply from spreading rate, captures the essential physics of hydrothermal convection, and considers multiple modes of melt emplacement. Our simulations show that melt flux is a better thermal predictor than spreading rate. While multiple combinations of melt/dike emplacement modes, permeability structure, and temporal fluctuations of melt supply can explain shallow crustal AMLs at slow-ultraslow ridges, they all require elevated melt fluxes compared to most ridge sections of comparable spreading rates. This highlights the importance of along-axis melt focusing at slow-ultraslow ridges and sheds light on the natural variability of their thermal regimes.

How transform fault shear influences where detachment faults form near mid-ocean ridges

Oceanic detachment faults represent an end-member form of seafloor creation, associated with relatively weak magmatism at slow-spreading mid-ocean ridges. We use 3-D numerical models to investigate the underlying mechanisms for why detachment faults predominantly form on the transform side (inside corner) of a ridge-transform intersection as opposed to the fracture zone side (outside corner). One hypothesis for this behavior is that the slipping, and hence weaker, transform fault allows for the detachment fault to form on the inside corner, and a stronger fracture zone prevents the detachment fault from forming on the outside corner. However, the results of our numerical models, which simulate different frictional strengths in the transform and fracture zone, do not support the first hypothesis. Instead, the model results, combined with evidence from rock physics experiments, suggest that shear-stress on transform fault generates excess lithospheric tension that promotes detachment faulting on the inside corner.

Microseismicity and lithosphere thickness at a nearly-amagmatic oceanic detachment fault system

Oceanic detachment faults play a central role in accommodating the plate divergence at slow-ultraslow spreading mid-ocean ridges. Successive flip-flop detachment faults in a nearly-amagmatic region of the ultraslow spreading Southwest Indian Ridge (SWIR) at 64°30'E accommodate ~100% of plate divergence, with mostly ultramafic smooth seafloor. Here we present microseismicity data, recorded by ocean bottom seismometers, showing that the axial brittle lithosphere is on the order of 15 km thick under the nearly-amagmatic smooth seafloor, which is no thicker than under nearby volcanic seafloor or at more magmatic SWIR detachment systems. Our data reveal that microearthquakes with normal focal mechanisms are colocated with seismically-imaged damage zones of the active detachment fault and of antithetic hanging-wall faults. The level of the hanging-wall seismicity is significantly higher than that documented at more magmatic detachments of slow-ultraslow ridges, which may be a unique feature of nearly-amagmatic flip-flop detachment systems.

Discovery of active off-axis hydrothermal vents at 9° 54'N East Pacific Rise

Comprehensive knowledge of the distribution of active hydrothermal vent fields along midocean ridges is essential to understanding global chemical and heat fluxes and endemic faunal distributions. However, current knowledge is biased by a historical preference for on-axis surveys. A scarcity of high-resolution bathymetric surveys in off-axis regions limits vent identification, which implies that the number of vents may be underestimated. Here, we present the discovery of an active, high-temperature, off-axis hydrothermal field on a fast-spreading ridge. The vent field is located 750 m east of the East Pacific Rise axis and ∼7 km north of on-axis vents at 9° 50'N, which are situated in a 50- to 100-m-wide trough. This site is currently the largest vent field known on the East Pacific Rise between 9 and 10° N. Its proximity to a normal fault suggests that hydrothermal fluid pathways are tectonically controlled. Geochemical evidence reveals deep fluid circulation to depths only 160 m above the axial magma lens. Relative to on-axis vents at 9° 50'N, these off-axis fluids attain higher temperatures and pressures. This tectonically controlled vent field may therefore exhibit greater stability in fluid composition, in contrast to more dynamic, dike-controlled, on-axis vents. The location of this site indicates that high-temperature convective circulation cells extend to greater distances off axis than previously realized. Thorough high-resolution mapping is necessary to understand the distribution, frequency, and physical controls on active off-axis vent fields so that their contribution to global heat and chemical fluxes and role in metacommunity dynamics can be determined.

Influence of late Pleistocene sea-level variations on midocean ridge spacing in faulting simulations and a global analysis of bathymetry

It is established that changes in sea level influence melt production at midocean ridges, but whether changes in melt production influence the pattern of bathymetry flanking midocean ridges has been debated on both theoretical and empirical grounds. To explore the dynamics that may give rise to a sea-level influence on bathymetry, we simulate abyssal hills using a faulting model with periodic variations in melt supply. For 100-ky melt-supply cycles, model results show that faults initiate during periods of amagmatic spreading at half-rates >2.3 cm/y and for 41-ky melt-supply cycles at half-rates >3.8 cm/y. Analysis of bathymetry across 17 midocean ridge regions shows characteristic wavelengths that closely align with the predictions from the faulting model. At intermediate-spreading ridges (half-rates >2.3 cm/y and [Formula: see text]3.8 cm/y) abyssal hill spacing increases with spreading rate at 0.99 km/(cm/y) or 99 ky (n [Formula: see text] 12; 95% CI, 87 to 110 ky), and at fast-spreading ridges (half-rates >3.8 cm/y) spacing increases at 38 ky (n [Formula: see text] 5; 95% CI, 29 to 47 ky). Including previously published analyses of abyssal-hill spacing gives a more precise alignment with the primary periods of Pleistocene sea-level variability. Furthermore, analysis of bathymetry from fast-spreading ridges shows a highly statistically significant spectral peak (P < 0.01) at the 1/(41-ky) period of Earth's variations in axial tilt. Faulting models and observations both support a linkage between glacially induced sea-level change and the fabric of the sea floor over the late Pleistocene.

Low-degree mantle melting controls the deep seismicity and explosive volcanism of the Gakkel Ridge

The world's strongest known spreading-related seismicity swarm occurred in 1999 in a segment of the Gakkel Ridge located at 85°E as a consequence of an effusive-explosive submarine volcanic eruption. The data of a seismic network deployed on ice floes were used to locate hundreds of local earthquakes down to ∼25 km depth and to build a seismic tomography model under the volcanic area. Here we show the seismicity and the distribution of seismic velocities together with the 3D magmatic-thermomechanical numerical model, which demonstrate how a magma reservoir under the Gakkel Ridge may form, rise and trigger volcanic eruptions in the rift valley. The ultraslow spreading rates with low mantle potential temperatures appear to be a critical factor in the production of volatile-rich, low-degree mantle melts that are focused toward the magma reservoirs within narrow magmatic sections. The degassing of these melts is the main cause of the explosive submarine eruptions.

Mantle exhumation at magma-poor rifted margins controlled by frictional shear zones

The transition zone from continental crust to the mature mid-ocean ridge spreading center of the Iberia-Newfoundland magma-poor rifted margins is mostly composed of exhumed mantle characterized by highs and domes with varying elevation, spacing and shape. The mechanism controlling strain localization and fault migration explaining the geometry of these peridotite ridges is poorly understood. Here we show using forward geodynamic models that multiple out-of-sequence detachments with recurring dip reversal form during magma-poor rifting and mantle exhumation as a consequence of the strength competition between weak frictional-plastic shear zones and the thermally weakened necking domain beneath the exhuming footwall explaining geometry of these peridotite ridges. Model behaviour also shows that fault types and detachment styles vary with spreading rate and fault strength and confirm that these results can be compared to other magma poor passive margins such as along Antarctica-Australia and to ultra-slow mid-ocean spreading systems as the South-West Indian Ridge.

An intermittent detachment faulting system with a large sulfide deposit revealed by multi-scale magnetic surveys

Magmatic and tectonic processes can contribute to discontinuous crustal accretion and play an important role in hydrothermal circulation at ultraslow-spreading ridges, however, it is difficult to accurately describe the processes without an age framework to constrain crustal evolution. Here we report on a multi-scale magnetic survey that provides constraints on the fine-scale evolution of a detachment faulting system that hosts hydrothermal activity at 49.7°E on the Southwest Indian Ridge. Reconstruction of the multi-stage detachment faulting history shows a previous episode of detachment faulting took place 0.76~1.48 My BP, while the present fault has been active for the past ~0.33 My and is just in the prime of life. This fault sustains hydrothermal circulation that has the potential for developing a large sulfide deposit. High resolution multiscale magnetics allows us to constrain the relative balance between periods of detachment faulting and magmatism to better describe accretionary processes on an ultraslow spreading ridge.

In ultraslow-spreading ridges intermittent detachment faulting could contribute to discontinuous magmatic accretion supporting the development of massive sulfide deposits. Here the authors using a multi-scale magnetic survey of the Southwest Indian Ridge constrain that an episode of detachment faulting took place 0.7-1.48 Ma, with the present fault active since 0.33 Ma.

Transition from continental rifting to oceanic spreading in the northern Red Sea area

Lithosphere extension, which plays an essential role in plate tectonics, occurs both in continents (as rift systems) and oceans (spreading along mid-oceanic ridges). The northern Red Sea area is a unique natural geodynamic laboratory, where the ongoing transition from continental rifting to oceanic spreading can be observed. Here, we analyze travel time data from a merged catalogue provided by the Egyptian and Saudi Arabian seismic networks to build a three-dimensional model of seismic velocities in the crust and uppermost mantle beneath the northern Red Sea and surroundings. The derived structures clearly reveal a high-velocity anomaly coinciding with the Red Sea basin and a narrow low-velocity anomaly centered along the rift axis. We interpret these structures as a transition of lithospheric extension from continental rifting to oceanic spreading. The transitional lithosphere is manifested by a dominantly positive seismic anomaly indicating the presence of a 50–70-km-thick and 200–300-km-wide cold lithosphere. Along the forming oceanic ridge axis, an elongated low-velocity anomaly marks a narrow localized nascent spreading zone that disrupts the transitional lithosphere. Along the eastern margins of the Red Sea, several low-velocity anomalies may represent crustal zone of massive Cenozoic basaltic magmatism.

Chemical and isotopic analyses of hydrocarbon-bearing fluid inclusions in olivine-rich rocks

We examined the mineralogical, chemical and isotopic compositions of secondary fluid inclusions in olivine-rich rocks from two active serpentinization systems: the Von Damm hydrothermal field (Mid-Cayman Rise) and the Zambales ophiolite (Philippines). Peridotite, troctolite and gabbroic rocks in these systems contain abundant CH4-rich secondary inclusions in olivine, with less abundant inclusions in plagioclase and clinopyroxene. Olivine-hosted secondary inclusions are chiefly composed of CH4 and minor H2, in addition to secondary minerals including serpentine, brucite, magnetite and carbonates. Secondary inclusions in plagioclase are dominated by CH4 with variable amounts of H2 and H2O, while those in clinopyroxene contain only CH4. We determined hydrocarbon abundances and stable carbon isotope compositions by crushing whole rocks and analysing the released volatiles using isotope ratio monitoring-gas chromatography mass spectrometry. Bulk rock gas analyses yielded appreciable quantities of CH4 and C2H6 in samples from Cayman (4-313 nmol g-1 CH4 and 0.02-0.99 nmol g-1 C2H6), with lesser amounts in samples from Zambales (2-37 nmol g-1 CH4 and 0.004-0.082 nmol g-1 C2H6). Mafic and ultramafic rocks at Cayman exhibit δ13CCH4 values of -16.7‰ to -4.4‰ and δ13CC2H6 values of -20.3‰ to +0.7‰. Ultramafic rocks from Zambales exhibit δ13CCH4 values of -12.4‰ to -2.8‰ and δ13CC2H6 values of -1.2‰ to -0.9‰. Similarities in the carbon isotopic compositions of CH4 and C2H6 in plutonic rocks, Von Damm hydrothermal fluids, and Zambales gas seeps suggest that leaching of fluid inclusions may provide a significant contribution of abiotic hydrocarbons to deep-sea vent fluids and ophiolite-hosted gas seeps. Isotopic compositions of CH4 and C2H6 from a variety of hydrothermal fields hosted in olivine-rich rocks that are similar to those in Von Damm vent fluids further support the idea that a significant portion of abiotic hydrocarbons in ultramafic-influenced vent fluids is derived from fluid inclusions. This article is part of a discussion meeting issue 'Serpentinite in the Earth system'.

Volcanic-Tectonic Structure of the Mount Dent Oceanic Core Complex in the Ultraslow Mid-Cayman Spreading Center Determined From Detailed Seafloor Investigation

The flanks of the ultraslow-spreading Mid-Cayman Spreading Center (MCSC) are characterized by domal massifs or oceanic core complexes (OCCs). The most prominent of these, Mount Dent, comprises lower-crustal and upper-mantle lithologies and hosts the Von Damm vent field ~12 km west of the axial deep. Here, presented autonomous underwater vehicle-derived swath sonar (multibeam) mapping and deep-towed side-scan sonar imagery lead to our interpretation that: (i) slip along the OCC-bounding detachment fault is ceasing, (ii) the termination zone, where detachment fault meets the hanging wall, is disintegrating, (iii) the domed surface of the OCC is cut by steep north-south extensional faulting, and (iv) the breakaway zone is cut by outward facing faults. The Von Damm vent field and dispersed pockmarks on the OCC's south flank further suggest that hydrothermal fluid flow is pervasive within the faulted OCC. On the axial floor of the MCSC, bright acoustic backscatter and multibeam bathymetry reveal: (v) a volcanic detachment hanging wall, (vi) a major fault rifting the southern flank of Mount Dent, and (vii) a young axial volcanic ridge intersecting its northern flank. These observations are described by a conceptual model wherein detachment faulting and OCC exhumation are ceasing during an increase in magmatic intrusion, brittle deformation, and hydrothermal circulation within the OCC. Together, this high-resolution view of the MCSC provides an instructive example of how OCCs, formed within an overall melt-starved ultraslow spreading center, can undergo magmatism, hydrothermal activity, and faulting in much the same way as expected in magmatically more robust slow-spreading centers elsewhere.

Drying colloidal systems: Laboratory models for a wide range of applications

The drying of complex fluids provides a powerful insight into phenomena that take place on time and length scales not normally accessible. An important feature of complex fluids, colloidal dispersions and polymer solutions is their high sensitivity to weak external actions. Thus, the drying of complex fluids involves a large number of physical and chemical processes. The scope of this review is the capacity to tune such systems to reproduce and explore specific properties in a physics laboratory. A wide variety of systems are presented, ranging from functional coatings, food science, cosmetology, medical diagnostics and forensics to geophysics and art.

Response to Comment on "Sensitivity of seafloor bathymetry to climate-driven fluctuations in mid-ocean ridge magma supply"

Tolstoy reports the existence of a characteristic 100 thousand year (ky) period in the bathymetry of fast-spreading seafloor but does not argue that sea level change is a first-order control on seafloor morphology worldwide. Upon evaluating the overlap between tectonic and Milankovitch periodicities across spreading rates, we reemphasize that fast-spreading ridges are the best potential recorders of a sea level signature in seafloor bathymetry.

Sensitivity of seafloor bathymetry to climate-driven fluctuations in mid-ocean ridge magma supply

Recent studies have proposed that the bathymetric fabric of the seafloor formed at mid-ocean ridges records rapid (23,000 to 100,000 years) fluctuations in ridge magma supply caused by sealevel changes that modulate melt production in the underlying mantle. Using quantitative models of faulting and magma emplacement, we demonstrate that, in fact, seafloor-shaping processes act as a low-pass filter on variations in magma supply, strongly damping fluctuations shorter than about 100,000 years. We show that the systematic decrease in dominant seafloor wavelengths with increasing spreading rate is best explained by a model of fault growth and abandonment under a steady magma input. This provides a robust framework for deciphering the footprint of mantle melting in the fabric of abyssal hills, the most common topographic feature on Earth.

Glacial cycles drive variations in the production of oceanic crust

Glacial cycles redistribute water between oceans and continents, causing pressure changes in the upper mantle, with consequences for the melting of Earth's interior. Using Plio-Pleistocene sea-level variations as a forcing function, theoretical models of mid-ocean ridge dynamics that include melt transport predict temporal variations in crustal thickness of hundreds of meters. New bathymetry from the Australian-Antarctic ridge shows statistically significant spectral energy near the Milankovitch periods of 23, 41, and 100 thousand years, which is consistent with model predictions. These results suggest that abyssal hills, one of the most common bathymetric features on Earth, record the magmatic response to changes in sea level. The models and data support a link between glacial cycles at the surface and mantle melting at depth, recorded in the bathymetric fabric of the sea floor.

Recognizing detachment-mode seafloor spreading in the deep geological past

Large-offset oceanic detachment faults are a characteristic of slow- and ultraslow-spreading ridges, leading to the formation of oceanic core complexes (OCCs) that expose upper mantle and lower crustal rocks on the seafloor. The lithospheric extension accommodated by these structures is now recognized as a fundamentally distinct "detachment-mode" of seafloor spreading compared to classical magmatic accretion. Here we demonstrate a paleomagnetic methodology that allows unequivocal recognition of detachment-mode seafloor spreading in ancient ophiolites and apply this to a potential Jurassic detachment fault system in the Mirdita ophiolite (Albania). We show that footwall and hanging wall blocks either side of an inferred detachment have significantly different magnetizations that can only be explained by relative rotation during seafloor spreading. The style of rotation is shown to be identical to rolling hinge footwall rotation documented recently in OCCs in the Atlantic, confirming that detachment-mode spreading operated at least as far back as the Jurassic.

Stress imparted by the great 2004 Sumatra earthquake shut down transforms and activated rifts up to 400 km away in the Andaman Sea

The origin and prevalence of triggered seismicity and remote aftershocks are under debate. As a result, they have been excluded from probabilistic seismic hazard assessment and aftershock hazard notices. The 2004 M = 9.2 Sumatra earthquake altered seismicity in the Andaman backarc rift-transform system. Here we show that over a 300-km-long largely transform section of the backarc, M≥4.5 earthquakes stopped for five years, and over a 750-km-long backarc section, the rate of transform events dropped by two-thirds, while the rate of rift events increased eightfold. We compute the propagating dynamic stress wavefield and find the peak dynamic Coulomb stress is similar on the rifts and transforms. Long-period dynamic stress amplitudes, which are thought to promote dynamic failure, are higher on the transforms than on the rifts, opposite to the observations. In contrast to the dynamic stress, we calculate that the mainshock brought the transform segments approximately 0.2 bar (0.02 MPa) farther from static Coulomb failure and the rift segments approximately 0.2 bar closer to static failure, consistent with the seismic observations. This accord means that changes in seismicity rate are sufficiently predictable to be included in post-mainshock hazard evaluations.

Dynamical instability produces transform faults at mid-ocean ridges

Transform faults at mid-ocean ridges--one of the most striking, yet enigmatic features of terrestrial plate tectonics--are considered to be the inherited product of preexisting fault structures. Ridge offsets along these faults therefore should remain constant with time. Here, numerical models suggest that transform faults are actively developing and result from dynamical instability of constructive plate boundaries, irrespective of previous structure. Boundary instability from asymmetric plate growth can spontaneously start in alternate directions along successive ridge sections; the resultant curved ridges become transform faults within a few million years. Fracture-related rheological weakening stabilizes ridge-parallel detachment faults. Offsets along the transform faults change continuously with time by asymmetric plate growth and discontinuously by ridge jumps.

Central role of detachment faults in accretion of slow-spreading oceanic lithosphere

The formation of oceanic detachment faults is well established from inactive, corrugated fault planes exposed on sea floor formed along ridges spreading at less than 80 km Myr(-1) (refs 1-4). These faults can accommodate extension for up to 1-3 Myr (ref. 5), and are associated with one of the two contrasting modes of accretion operating along the northern Mid-Atlantic Ridge. The first mode is asymmetrical accretion involving an active detachment fault along one ridge flank. The second mode is the well-known symmetrical accretion, dominated by magmatic processes with subsidiary high-angle faulting and the formation of abyssal hills on both flanks. Here we present an examination of approximately 2,500 km of the Mid-Atlantic Ridge between 12.5 and 35 degrees N, which reveals asymmetrical accretion along almost half of the ridge. Hydrothermal activity identified so far in the study region is closely associated with asymmetrical accretion, which also shows high levels of near-continuous hydroacoustically and teleseismically recorded seismicity. Increased seismicity is probably generated along detachment faults that accommodate a sizeable proportion of the total plate separation. In contrast, symmetrical segments have lower levels of seismicity, which occurs primarily at segment ends. Basalts erupted along asymmetrical segments have compositions that are consistent with crystallization at higher pressures than basalts from symmetrical segments, and with lower extents of partial melting of the mantle. Both seismic evidence and geochemical evidence indicate that the axial lithosphere is thicker and colder at asymmetrical sections of the ridge, either because associated hydrothermal circulation efficiently penetrates to greater depths or because the rising mantle is cooler. We suggest that much of the variability in sea-floor morphology, seismicity and basalt chemistry found along slow-spreading ridges can be thus attributed to the frequent involvement of detachment faults in oceanic lithospheric accretion.