Catalytic C-H functionalization by metal carbenoid and nitrenoid insertion

α'-Selective Selenium-catalyzed Allylic C-H Amination of Enol Derivatives

A transition metal-free Se-catalyzed C-H amination protocol for α'-amination of enol derivatives has been developed. This reaction can be used to functionalize a wide variety of oxygen- and halogen-substituted alkenes spanning a vast range of nucleophilicities, giving α'-aminated enol derivatives with high regioselectivity. Amination of E/Z mixtures of alkenes proceeds stereoconvergently to give the (Z)-enol derivatives exclusively. Mechanistic studies revealed that the relative reactivity and α'-regioselectivity of these transformations is determined by substantial resonance donation to the heteroatom-bound carbon in the transition state. These products participate in traditional reactions of enol derivatives, allowing for efficient functionalization of both α- and α'-positions from a single enol derivative with high diastereocontrol.

Benzoic Acid Serves as Precursor of Catalytic HAT Reagent in a Two-Molecule Photoredox System

The photoinduced regioselective HAT reactions of acetals, ethers, and alcohols using benzoic acids in a two-molecule photoredox system led to the formation of new C-C bonds with alkenes under mild conditions. Aryl carboxy radicals generated from benzoic acids in a two-molecule photoredox system can function as catalytic HAT reagents, even though an excess amount of a hydrogen donor substrate is required. Various acetals, ethers, alcohols, and alkenes can be employed in the photoreaction to provide both high yields of adducts and high recoveries of benzoic acids.

Purple light-induced Ritter-type reaction of diazophosphonates: access to α-amido-β-keto phosphonates

A Ritter-type reaction of diazophosphonates to synthesize α-amido-β-keto phosphonates has been reported in this study under purple light in the absence of a photocatalyst. This protocol shows that the synthesis of the amide functionality involves in situ generation of a carbene, followed by C-N bond formation with a nitrile. The purple LED irradiation alone is sufficient for the efficient transformation to afford synthetic routes to various amide moieties. A rationalization of the reaction mechanism was well supported by control experiments. A library of α-amido-β-keto phosphonates has been well documented for the synthetic community.

B(C6F5)3·H2O-Catalyzed N-H and C-H Functionalization of Aromatic Amines with Sulfoxonium Ylides under Metal-Free Conditions

Hydrogen-bonded aggregates of B(C6F5)3 and water are proven as strong Brønsted acid catalysts, which have the advantages of low toxicity and broad compatibility. Sulfoxonium ylides are stable surrogates of diazo compounds, which participate in various reactions due to their versatile reactivity. Based on these characteristics, a strategy for C-N bond or C-C bond construction of aromatic amines with sulfoxonium ylides under metal-free catalytic conditions was established. This method has advantages of mild conditions and excellent yield, which is suitable for the N-H or C-H functionalization of various aromatic amine compounds.

Modularization of Immobilized Multienzyme Cascades for Continuous-Flow Enantioselective C-H Amination

Multienzyme cascades (MECs) have gained much attention in synthetic chemistry but remain far from being a reliable synthetic tool. Here we report a four-enzyme cascade comprising a cofactor-independent and a cofactor self-sustaining bienzymatic modules for the enantioselective benzylic C-H amination of arylalkanes, a challenging transformation from bulk chemicals to high value-added chiral amines. The two modules were subsequently optimized by enzyme co-immobilization with microenvironmental tuning, and finally integrated in a gas-liquid segmented flow system, resulting in simultaneous improvements in enzyme performance, mass transfer, system compatibility, and productivity. The flow system enabled continuous C-H amination of arylalkanes (up to 100 mM) utilizing the sole cofactor NADH (0.5 mM) in >90 % conversion, achieving a high space-time yield (STY) of 3.6 g ⋅ L-1 ⋅ h-1, which is a 90-fold increase over the highest value previously reported.

Recent Advances in Direct Regioselective C-H Chlorination at Aromatic and Aliphatic

Direct installation of key functionalities in a molecule through C-H bond activation is one of the thrust areas as well as challenging task in organic synthesis. Particularly, introduction of chlorine in a molecule imparts additional benefits for further functionalizations as well as improves the electronic behaviour such as lipophilicity and polarity towards drug development process. The chlorinated molecules have also been established as efficient biologically relevant scaffolds. Current manuscript has been focused on the direct installation of the chlorine atom at various aromatic and aliphatic positions to produce functional molecules. The key highlight of the manuscript belongs to the site selectivity (regioselectivity) for the installation of chlorine functionality. Manuscript describes the advanced methods developed for the direct C-H chlorination reactions and further simplified for the chlorination reactions at various positions including aromatic (o-, m-, and p-), benzylic, heteroaromatic, and aliphatic positions. Directing groups (DGs) and the coordination with the catalyst is the key for the enhancement of regioselectivities during direct C-H chlorination reactions.

Visible light induced cooperative carbonylation and (hetero)aryl migration: synthesis of multi-carbonyl compounds

Carbonylative transformation represents one of the most straightforward procedures for the synthesis of carbonyl-containing compounds. However, the carbonylative procedure toward 1,4-diketones is still limited which are key moieties with potent applications in various areas. Herein, we report a new strategy for the synthesis of multi-carbonyl compounds containing a 1,4-diketone skeleton through remote heteroaryl migration of traditionally restricted 1,3-migratory substrates utilizing carbon monoxide (CO) as the C1 synthon and diazonium compounds as the starting material.

A Mechanistic Study on Iron-Based Styrene Aziridination: Understanding Epoxidation via Nitrene Hydrolysis

Transition-metal-catalyzed nitrene transfer reactions are typically performed in organic solvents under inert and anhydrous conditions due to the involved air and water-sensitive nature of reactive intermediates. Overall, this study provides insights into the iron-based ([FeII(PBI)3](CF3SO3)2 (1), where PBI = 2-(2-pyridyl)benzimidazole), catalytic and stoichiometric aziridination of styrenes using PhINTs ([(N-tosylimino)iodo]benzene), highlighting the importance of reaction conditions including the effects of the solvent, co-ligands (para-substituted pyridines), and substrate substituents on the product yields, selectivity, and reaction kinetics. The aziridination reactions with 1/PhINTs showed higher conversion than epoxidation with 1/PhIO (iodosobenzene). However, the reaction with PhINTs was less selective and yielded more products, including styrene oxide, benzaldehyde, and 2-phenyl-1-tosylaziridine. Therefore, the main aim of this study was to investigate the potential role of water in the formation of oxygen-containing by-products during radical-type nitrene transfer catalysis. During the catalytic tests, a lower yield was obtained in a protic solvent (trifluoroethanol) than in acetonitrile. In the case of the catalytic oxidation of para-substituted styrenes containing electron-donating groups, higher yield, TON, and TOF were achieved than those with electron-withdrawing groups. Pseudo-first-order kinetics were observed for the stoichiometric oxidation, and the second-order rate constants (k2 = 7.16 × 10-3 M-1 s-1 in MeCN, 2.58 × 10-3 M-1 s-1 in CF3CH2OH) of the reaction were determined. The linear free energy relationships between the relative reaction rates (logkrel) and the total substituent effect (TE, 4R-PhCHCH2) parameters with slopes of 1.48 (MeCN) and 1.89 (CF3CH2OH) suggest that the stoichiometric aziridination of styrenes can be described through the formation of a radical intermediate in the rate-determining step. Styrene oxide formation during aqueous styrene aziridination most likely results from oxygen atom transfer via in situ iron oxo/oxyl radical complexes, which are formed through the hydrolysis of [FeIII(N•Ts)] under experimental conditions.

Asymmetric Carbene Transfer: Enhancing Chemical Diversity for Drug Discovery

The quest to explore chemical space is vital for identifying novel disease targets, impacting both the effectiveness and safety profile of therapeutic agents. The tangible chemical space, currently estimated at a conservative 108 synthesized compounds, pales in comparison to the theoretically conceivable diversity of 1060 molecules. To bridge this vast gap, organic chemists are spearheading innovative methodologies that promise to broaden this limited chemical diversity. A beacon of this progressive wave is Asymmetric Carbene Transfer (ACT), a burgeoning strategy that significantly boosts molecular diversity with efficient bond-formation and precise chiral control. This review focuses on the capabilities of ACT in creating pharmaceutically significant molecules, encompassing an array of natural products and bioactive compounds. Through the lens of ACT, we discern its substantial influence on drug discovery, paving the way for novel therapeutic avenues by expanding the boundaries of molecular diversity. This review will shed light on prospective methodological developments of ACT and articulate their conceivable contributions to the medicinal chemistry arena.

Unlocking catalytic potential: a rhodium(II)-based coordination polymer for efficient carbene transfer reactions with donor/acceptor diazoalkanes

Herein, we report the use of a molecular-defined rhodium(II) coordination polymer (Rh-CP) as a heterogeneous, recyclable catalyst in carbene transfer reactions. We showcase the application of this heterogeneous catalyst in a range of carbene transfer reactions and conclude with the functionalization of natural products and drug molecules.

Control over Anion Coordination on Pd(II), Cu(I), and Ag(I) with Regioisomeric Phosphine-Carboxylate Ligands

The coordination of anionic donors is involved at various stages of catalytic cycles in transition-metal catalysis, but control over the spatial positioning of anions around a metal center is a challenge in coordination chemistry. Here we show that regioisomeric phosphine-carboxylate ligands provide spatial anion control on palladium(II) centers by favoring either κ2, cis-κ1, or trans-κ1 coordination of the carboxylate donor. Additionally, the palladium(II) carboxylates, which contain a methyl donor, upon protonation, deliver metal-alkyl complexes that feature a coordinated carboxylic acid. Such complexes can be considered as models for the minima that follow the concerted metalation-deprotonation transition state for C-H activation. The predictability of the coordination modes is further demonstrated on silver(I) and copper(I) centers, for which less common structures of mononuclear and dinuclear complexes can be obtained by using spatial anion control. Our results demonstrate the potential for spatial control over carboxylate anions in coordination chemistry.

Free carbenes from complementarily paired alkynes

Carbenes (R1R2C:) like radicals, arynes and nitrenes constitute an important family of neutral, high-energy, reactive intermediates-fleeting chemical entities that undergo rapid reactions. An alkyne (R3C≡CR4) is a fundamental functional group that houses a high degree of potential energy; however, the substantial kinetic stability of alkynes renders them conveniently handleable as shelf-stable chemical commodities. The ability to generate metal-free carbenes directly from alkynes, fuelled by the high potential (that is, thermodynamic) energy of the latter, would constitute a considerable advance. We report here that this can be achieved simply by warming a mixture of a 2-alkynyl iminoheterocycle (a cyclic compound containing a nucleophilic nitrogen atom) with an electrophilic alkyne. We demonstrate considerable generality for the process: many shelf-stable alkyne electrophiles engage many classes of (2-alkynyl)heterocyclic nucleophiles to produce carbene intermediates that immediately undergo many types of transformations to provide facile and practical access to a diverse array of heterocyclic products. Key mechanistic aspects of the reactions are delineated.

Carbene-Assisted Arene Ring-Opening

Despite the significant achievements in dearomatization and C-H functionalization of arenes, the arene ring-opening remains a largely unmet challenge and is underdeveloped due to the high bond dissociation energy and strong resonance stabilization energy inherent in aromatic compounds. Herein, we demonstrate a novel carbene assisted strategy for arene ring-opening. The understanding of the mechanism by our DFT calculations will stimulate wide application of bulk arene chemicals for the synthesis of value-added polyconjugated chain molecules. Various aryl azide derivatives now can be directly converted into valuable polyconjugated enynes, avoiding traditional synthesis including multistep unsaturated precursors, poor selectivity control, and subsequent transition-metal catalyzed cross-coupling reactions. The simple conditions required were demonstrated in the late-stage modification of complex molecules and fused ring compounds. This chemistry expands the horizons of carbene chemistry and provides a novel pathway for arene ring-opening.

Carbene-Mediated Polymer Modification Using Diazo Compounds under Photo or Thermal Activation Conditions

Based on the characteristics of commodity polymers in large quantities and low costs, modification of existing commodity polymers emerges as the most effective approach for exploring novel materials. Nevertheless, conventional modification methods typically involve high-energy processes (e.g., high temperature, high-energy radiation), which may lead to irreversible detrimental effects on the polymers, contradicting the desired performance enhancement through modification. In this work, we propose a carbene-mediated postpolymerization modification (PPM) strategy utilizing diazo compounds. Under photochemical or thermal activation conditions, insertion of the C-H bond can be achieved without compromising the performance of polymers. These diazo compounds can be easily synthesized in just two steps and applied to all C-H-containing polymers. This practical and effective modification strategy offers new opportunities and possibilities for enhancing the value and expanding the applications of polymers.

Visible Light-Induced Reactions of Diazo Compounds and Their Precursors

In recent years, visible light-induced reactions of diazo compounds have attracted increasing attention in organic synthesis, leading to improvement of existing reactions, as well as to the discovery of unprecedented transformations. Thus, photochemical or photocatalytic generation of both carbenes and radicals provide milder tools toward these key intermediates for many valuable transformations. However, the vast majority of the transformations represent new reactivity modes of diazo compounds, which are achieved by the photochemical decomposition of diazo compounds and photoredox catalysis. In particular, the use of a redox-active photocatalysts opens the avenue to a plethora of radical reactions. The application of these methods to diazo compounds led to discovery of transformations inaccessible by the classical reactivity associated with carbenes and metal carbenes. In most cases, diazo compounds act as radical sources but can also serve as radical acceptors. Importantly, the described processes operate under mild, practical conditions. This Review describes this subfield of diazo compound chemistry, particularly focusing on recent advancements.

Photoinduced [3+2] Cycloaddition of Alkyl-Acceptor Diazoalkanes: Diversity-Oriented Synthesis of Pyrazolines Containing a Quaternary Center

We present a new [3+2] cycloaddition reaction between alkyl-acceptor diazoalkanes under visible light irradiation. By employing easily accessible alkyl-acceptor-type diazoalkanes or their precursor hydrazones as both 1,3-dipoles and dipolarophiles, a diverse range of pyrazoline derivatives featuring a quaternary center have been efficiently synthesized in a predictable manner, with excellent functional group tolerance and good yields. Furthermore, scale-up experiments and downstream transformations of the product were also detailed.

Palladium-Catalyzed Arylation of C(sp2)-H Bonds and C(sp3)-H Bonds with 4-Amino-benzotriazole as the Bidentate Directing Group

The arylation of C(sp2)-H and C(sp3)-H bonds in carboxylic acids catalyzed by Pd(II) with 4-aminobentriazole as the directing group was investigated. In addition to activation of the C(sp2)-H bond, selective arylation of alkyl carboxylic acids and amino acids in the β position can also be achieved. This strategy involved a 5,5-bicyclic Pd intermediate complex whose structure was determined by X-ray single crystal diffraction analysis. Importantly, the DG (directing group) can be easily removed under mild conditions.

Catalytic asymmetric carbenoid α-C-H insertion of ether

Significant advancements have been made in catalytic asymmetric α-C-H bond functionalization of ethers via carbenoid insertion over the past decade. Effective asymmetric catalytic systems, featuring a range of chiral metal catalysts, have been established for the enantioselective synthesis of diverse ether substrates. This has led to the generation of various enantioenriched, highly functionalized oxygen-containing structural motifs, facilitating their application in the asymmetric synthesis of bioactive natural products.

Vibrational synchronization and its reaction pathway influence from an entropic intermediate in a dirhodium catalyzed allylic C-H activation/Cope rearrangement reaction

In reactions with consecutive transition states without an intermediate, and an energy surface bifurcation, atomic motion generally determines product selectivity. Understanding this dynamic-based selectivity can be straightforward if there is extremely fast descent from the first transition state to a product. However, in cases where a nonstatistical roaming/entropic intermediate occurs prior to product formation the motion that influences selectivity can be difficult to identify. Here we report quasiclassical direct dynamics trajectories for the dirhodium catalyzed reaction between styryldiazoacetate and 1,4-cyclohexadiene and prior experiments by Davies showed competitive allylic C-H insertion and Cope products. Trajectories confirmed the proposed energy surface bifurcation and revealed that dirhodium vinylcarbenoid when reacting with 1,4-cyclohexadiene can induce either a dynamically concerted pathway or a dynamically stepwise pathway with a nonstatistical entropic tight ion-pair intermediate. In the dynamically stepwise reaction pathway C-H insertion versus Cope selectivity is highly influenced by whether or not vibrational synchronization occurs in the nonstatistical entropic intermediate. This vibrational synchronization highlights the possible need for an entropic intermediate to have organized transition state-like motion to proceed to a product.

Enantioselective α-Boryl Carbene Transformations

Carbenes, recognized as potent intermediates, enable unique chemical transformations, and organoborons are pivotal in diverse chemical applications. As a hybrid of carbene and the boryl group, α-boryl carbenes are promising intermediates for the construction of organoborons; unfortunately, such carbenes are hard to access and have low structural diversity with their asymmetric transformations largely uncharted. In this research, we utilized boryl cyclopropenes as precursors for the swift synthesis of α-boryl metal carbenes, a powerful category of intermediates for chiral organoboron synthesis. These α-boryl carbenes undergo a series of highly enantioselective transfer reactions, including B-H and Si-H insertion, cyclopropanation, and cyclopropanation/Cope rearrangement, catalyzed by a singular chiral copper complex. This approach opens paths to previously unattainable but easily transformable chiral organoborons, expanding both carbene and organoboron chemistry.

Regioselective Synthesis of the Tetrahydrocarbazole Core of Akuammiline Alkaloids via Palladium-Catalyzed Intramolecular Arylation Reaction

Tetrahydrocarbazole is the central core for several biologically active alkaloids, and regioselective synthesis of this core is a challenging task. Herein, we report an efficient strategy for the synthesis of this core involving palladium-catalyzed intramolecular arylation reaction with excellent regioselectivity (>99%) starting from N-phenyl-bromoalkene without having any relocation of double bonds via competitive palladium-catalyzed isomerization reaction. Broad functional group tolerance and exclusive regioselectivity have been observed for meta-substituted halide substrates. Furthermore, this reaction can be scalable on the gram scale.

Amphos-Mediated Conversion of Alkyl Azides to Diazo Compounds and One-Pot Azide-Site Selective Transient Protection, Click Conjugation, and Deprotective Transformation

A one-pot conversion of alkyl azides to diazo compounds is outlined. After the reaction of α-azidocarbonyl compounds with Amphos, treatment of the resulting phosphazides with silica gel in a wet solvent afforded α-diazo carbonyl products. Through the azido group protection property of Amphos, inter- and intramolecular azide-site selective reactions of azido group protection, click functionalization, and deprotection of the diazo group have been demonstrated in one pot.

Copper-catalyzed carbonylative multi-component borylamidation of alkenes for synthesizing γ-boryl amides with CO as both methylene and carbonyl sources

A multi-component carbonylation reaction is an efficient strategy for the synthesis of valuable carbonyl compounds from simple and readily available substrates. However, there remain challenges in carbonylation reactions where two CO molecules are converted to different groups in the target product. Considering the merit of complex amides, we reported here a copper-catalyzed multi-component borylamidation for the synthesis of γ-boryl amides. This method provides access to a wide range of functional γ-boryl amides from alkenes, amines, B2pin2, and CO with good yields and excellent diastereomeric ratios. Notably, two CO molecules were converted to methylene and carbonyl groups in the target amides. A series of amines were successfully involved in the transformation, including arylamines, aliphatic amines, and hydrochloride salts of secondary aliphatic amines.

Csp2-H functionalization of phenols: an effective access route to valuable materials via Csp2-C bond formation

In the vast majority of top-selling pharmaceutical and industrial products, phenolic structural motifs are highly prevalent. Non-functionalized simple phenols serve as building blocks in the synthesis of value-added chemicals. It is worth mentioning that lignin, being the largest renewable biomass source of aromatic building blocks in nature, mainly consists of phenolic units, which enable the production of structurally diverse phenols. Given their remarkable applicability in the chemical value chain, many efforts have been devoted to increasing the molecular complexity of the phenolic scaffold. Among the key techniques, direct functionalization of Csp2-H is a powerful tool, enabling the construction of new Csp2-C bonds in an economical and atomic manner. Herein we present and summarize the large plethora of direct Csp2-H functionalization methods that enables scaffold diversification of simple, unprotected phenols, leading to the formation of new Csp2-C bonds. In this review article, we intend to summarize the contributions that appeared in the literature mainly in the last 5 years dealing with the functionalization of unprotected phenols, both catalytic and non-catalytic. Our goal is to highlight the key findings and the ongoing challenges in the stimulating and growing research dedicated to the development of new protocols for the valorization of phenols.

Silica nanoparticles and kaolin clay decorated with VO2+ in aerobic oxidative destruction of BTEX contaminants

The importance of controlled hydrocarbon oxidation has sparked interest in methods that catalyze this process. In this vein, controlled oxidative degradation of BTEX compounds (benzene, toluene, ethylbenzene and xylenes) which are hazardous air and industrial waste water contaminants is very considerable. Accordingly, the reactive VO2+ species was anchored onto silica nanoparticles (VO-SNP) to catalyze the conversion of BTEX into useful compounds. The synthesized heterogeneous VO-SNP catalyst was characterized using different techniques such as FTIR, FETEM, FESEM, XRD, EDX, ICP and XPS. Interestingly, the catalyst performed the activation of the relatively inert C-H bonds of BTEX to produce oxygenated compounds under quite mild and eco-friendly conditions at room temperature with no extra additives. Furthermore, we introduced VO2+ species onto mineral kaolin sheets (VO-kaolin) as a vanadyl decorated natural solid support and the results showed less efficiency compared to VO-SNP.

Ag-Catalyzed Practical Synthesis of N-Acyl Anthranilic Acids from Anthranils and Carboxylic Acids

A practical synthesis of valuable N-acyl anthranilic acids has been achieved via a silver-catalyzed imino-ketene generation from readily available anthranils and carboxylic acids. A wide range of carboxylic acids including sterically demanding aliphatic carboxylic acids, aromatic carboxylic acids, acrylic acids, and amino acids are compatible in this reaction. Moreover, this method can be used to modify drug molecules and natural products, such as ibuprofen, probenecid, and acetylglycine.

Blue-Light Irradiated Mn(0)-Catalyzed Hydroxylation and C(sp3 )-H Functionalization of Unactivated Alkanes with C(sp2 )-H Bonds of Quinones for Alkylated Hydroxy Quinones and Parvaquone

Site-selective C(sp3 )-H functionalization of unreactive hydrocarbons is always challenging due to its inherited chemical inertness, slightly different reactivity of various C-H bonds, and intrinsically high bond dissociation energies. Here, a site-selective C-H alkylation of naphthoquinone with unactivated hydrocarbons using Mn2 (CO)10 as a catalyst under blue-light (457 nm) irradiation without any external acid or base and pre-functionalization is presented. The selective C-H functionalization of tertiary over secondary and secondary over primary C(sp3 )-H bonds in abundant chemical feedstocks was achieved, and hydroxylation of quinones was realized in situ by employing the developed methodology. This protocol provides a new catalytic system for the direct construction of high-value-added compounds, namely, parvaquone (a commercially available drug used to treat theileriosis) and its derivatives under ambient reaction conditions. Moreover, this operationally simple protocol applies to various linear-, branched-, and cyclo-alkanes with high degrees of site selectivity under blue-light irradiated conditions and could provide rapid and straightforward access to versatile methodologies for upgrading feedstock chemicals. Mechanistic insight by radical trapping, radical scavenging, EPR, and other controlled experiments well corroborated with DFT studies suggest that the reaction proceeds by a radical pathway.

Visible-Light-Promoted α-C(sp3)-H Amination of Ethers with Azoles and Amides

A visible-light-induced highly efficient C(sp3)-H amination of ethers with amides and azoles has been presented under mild conditions via a nitrogen- and carbon-centered radical coupling process. This protocol successfully utilizes 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) and tert-butyl nitrite (TBN) as cocatalysts to deliver the aminated products of ethers under aerobic conditions. Notably, the developed reaction features the corresponding products in good yields (up to 93%) with a wide substrate scope. The mechanistic study indicates that C-N bond formation proceeds via a direct radical cross-coupling process. Preliminary biological activity analysis indicates that the resulting products have good and selective inhibitory activity on osteosarcoma (OS) cell lines and are promising for use as hits for drug discovery.

Enzymatic Assembly of Diverse Lactone Structures: An Intramolecular C-H Functionalization Strategy

Lactones are cyclic esters with extensive applications in materials science, medicinal chemistry, and the food and perfume industries. Nature's strategy for the synthesis of many lactones found in natural products always relies on a single type of retrosynthetic strategy, a C-O bond disconnection. Here, we describe a set of laboratory-engineered enzymes that use a new-to-nature C-C bond-forming strategy to assemble diverse lactone structures. These engineered "carbene transferases" catalyze intramolecular carbene insertions into benzylic or allylic C-H bonds, which allow for the synthesis of lactones with different ring sizes and ring scaffolds from simple starting materials. Starting from a serine-ligated cytochrome P450 variant previously engineered for other carbene-transfer activities, directed evolution generated a variant P411-LAS-5247, which exhibits a high activity for constructing a five-membered ε-lactone, lactam, and cyclic ketone products (up to 5600 total turnovers (TTN) and >99% enantiomeric excess (ee)). Further engineering led to variants P411-LAS-5249 and P411-LAS-5264, which deliver six-membered δ-lactones and seven-membered ε-lactones, respectively, overcoming the thermodynamically unfavorable ring strain associated with these products compared to the γ-lactones. This new carbene-transfer activity was further extended to the synthesis of complex lactone scaffolds based on fused, bridged, and spiro rings. The enzymatic platform developed here complements natural biosynthetic strategies for lactone assembly and expands the structural diversity of lactones accessible through C-H functionalization.

Deciphering Iron-Catalyzed C-H Amination with Organic Azides: N2 Cleavage from a Stable Organoazide Complex

Catalytic C-N bond formation by direct activation of C-H bonds offers wide synthetic potential. En route to C-H amination, complexes with organic azides are critical precursors towards the reactive nitrene intermediate. Despite their relevance, α-N coordinated organoazide complexes are scarce in general, and elusive with iron, although iron complexes are by far the most active catalysts for C-H amination with organoazides. Herein, we report the synthesis of a stable iron α-N coordinated organoazide complex from [Fe(N(SiMe3 )2 )2 ] and AdN3 (Ad=1-adamantyl) and its crystallographic, IR, NMR and zero-field 57 Fe Mössbauer spectroscopic characterization. These analyses revealed that the organoazide is in fast equilibrium between the free and coordinated state (Keq =62). Photo-crystallography experiments showed gradual dissociation of N2 , which imparted an Fe-N bond shortening and correspond to structural snapshots of the formation of an iron imido/nitrene complex. Reactivity of the organoazide complex in solution showed complete loss of N2 , and subsequent formation of a C-H aminated product via nitrene insertion into a C-H bond of the N(SiMe3 )2 ligand. Monitoring this reaction by 1 H NMR spectroscopy indicates the transient formation of the imido/nitrene intermediate, which was supported by Mössbauer spectroscopy in frozen solution.

Olefin Difunctionalization for the Synthesis of Tetrahydroisoquinoline, Morpholine, Piperazine, and Azepane

This report outlines a versatile strategy for synthesizing a diverse array of N-heterocycles. By the utilization of common olefins, this simple protocol facilitates their coupling with various bifunctional reagents. Furthermore, it can be integrated with C-H amination techniques to directly produce N-heterocycles in a multicomponent cascade coupling process. The unique bond disconnection logic employed in this process underscores its efficiency in achieving rapid simplification through cascade couplings.

Core Structure-Oriented Asymmetric α-Allenylic Alkylation of Amino Acid Esters Enabled by Chiral Aldehyde/Palladium Catalysis

Aiming at the reported chiral synthons leading to manzacidins A and D, here we report a highly efficient catalytic asymmetric α-allenylic alkylation reaction of NH2-unprotected amino acid esters that is promoted by combined chiral aldehyde/palladium catalysis. Fifty examples of unnatural α,α-disubstituted amino acid esters are reported with good-to-excellent yields and stereoselectivities. Based on this methodology, a key intermediate leading to manzacidin C and its other three stereoisomers is prepared accordingly.

Ligand-Promoted Iron-Catalyzed Nitrene Transfer for the Synthesis of Hydrazines and Triazanes through N-Amidation of Arylamines

Herein, we report that bulky alkylphosphines such as PtBu3 can switch the roles from actor to spectator ligands to promote the FeCl2 -catalyzed N-amidation reaction of arylamines with dioxazolones, giving hydrazides in high efficiency and chemoselectivity. Mechanistic studies indicated that the phosphine ligands could facilitate the decarboxylation of dioxazolones on the Fe center, and the hydrogen bonding interactions between the arylamines and the ligands on Fe nitrenoid intermediates might play a role in modulating the delicate interplay between the phosphine ligand, arylamine, and acyl nitrene N, favoring N-N coupling over N-P coupling. The new ligand-promoted N-amidation protocols offer a convenient way to access various challenging triazane compounds via double or sequential N-amidation of primary arylamines.

Transition-Metal-Catalyzed 1,2-Diaminations of Olefins: Synthetic Methodologies and Mechanistic Studies

1,2-Diamines are synthetically important motifs in organo-catalysis, natural products, and drug research. Continuous utilization of transition-metal based catalyst in direct 1,2-diamination of olefines, in contrast to metal-free transformations, with numerous impressive advances made in recent years (2015-2023). This review summarized contemporary research on the transition-metal catalyzed/mediated [e. g., Cu(II), Pd(II), Fe(II), Rh(III), Ir(III), and Co(II)] 1,2-diamination (asymmetric and non-asymmetric) especially emphasizing the recent synthetic methodologies and mechanistic understandings. Moreover, up-to-date discussion on (i) paramount role of oxidant and catalyst (ii) key achievements (iii) generality and uniqueness, (iv) synthetic limitations or future challenges, and (v) future opportunities are summarized related to this potential area.

A Formal γ-C-H Functionalization of Carboxylic Acids Guided by Metal-Nitrenoids as an Unprecedented Mechanistic Motif

Harnessing the key intermediates in metal-catalyzed reactions is one of the most essential strategies in the development of selective organic transformations. The nitrogen group transfer reactivity of metal-nitrenoids to ubiquitous C-H bonds allows for diverse C-N bond formation to furnish synthetically valuable aminated products. In this study, we present an unprecedented reactivity of iridium and ruthenium nitrenoids to generate remote carbocation intermediates, which subsequently undergo nucleophile incorporation, thus developing a formal γ-C-H functionalization of carboxylic acids. Mechanistic investigations elucidated a unique singlet metal-nitrenoid reactivity to initiate an abstraction of γ-hydride to form the carbocation intermediate that eventually reacts with a broad range of carbon, nitrogen, and oxygen nucleophiles, as well as biorelevant molecules. Alternatively, the same intermediate can lead to deprotonation to afford β,γ-unsaturated amides in a less nucleophilic solvent.

The Recent Advances in Iron-Catalyzed C(sp3 )-H Functionalization

The use of iron as a core metal in catalysis has become a research topic of interest over the last few decades. The reasons are clear. Iron is the most abundant transition metal on Earth's crust and it is widely distributed across the world. It has been extracted and processed since the dawn of civilization. All these features render iron a noncontaminant, biocompatible, nontoxic, and inexpensive metal and therefore it constitutes the perfect candidate to replace noble metals (rhodium, palladium, platinum, iridium, etc.). Moreover, direct C-H functionalization is one of the most efficient strategies by which to introduce new functional groups into small organic molecules. The majority of organic compounds contain C(sp3 )-H bonds. Given the enormous importance of organic molecules in so many aspects of existence, the utilization and bioactivity of C(sp3 )-H bonds are of the utmost importance. This review sheds light on the substrate scope, selectivity, benefits, and limitations of iron catalysts for direct C(sp3 )-H bond activations. An overview of the use of iron catalysis in C(sp3 )-H activation protocols is summarized herein up to 2022.

Lewis Acid Supported Nickel Nitrenoids

Metalation of the polynucleating ligand F,tbs LH6 (1,3,5-C6 H9 (NC6 H3 -4-F-2-NSiMe2 t Bu)3 ) with two equivalents of Zn(N(SiMe3 )2 )2 affords the dinuclear product (F,tbs LH2 )Zn2 (1), which can be further deprotonated to yield (F,tbs L)Zn2 Li2 (OEt2 )4 (2). Transmetalation of 2 with NiCl2 (py)2 yields the heterometallic, trinuclear cluster (F,tbs L)Zn2 Ni(py) (3). Reduction of 3 with KC8 affords [KC222 ][(F,tbs L)Zn2 Ni] (4) which features a monovalent Ni centre. Addition of 1-adamantyl azide to 4 generates the bridging μ3 -nitrenoid adduct [K(THF)3 ][(F,tbs L)Zn2 Ni(μ3 -NAd)] (5). EPR spectroscopy reveals that the anionic cluster possesses a doublet ground state (S =1 / 2 ${{ 1/2 }}$ ). Cyclic voltammetry of 5 reveals two fully reversible redox events. The dianionic nitrenoid [K2 (THF)9 ][(F,tbs L)Zn2 Ni(μ3 -NAd)] (6) was isolated and characterized while the neutral redox isomer was observed to undergo both intra- and intermolecular H-atom abstraction processes. Ni K-edge XAS studies suggest a divalent oxidation state for the Ni centres in both the monoanionic and dianionic [Zn2 Ni] nitrenoid complexes. However, DFT analysis suggests Ni-borne oxidation for 5.

Recent developments for intermolecular enantioselective amination of non-acidic C(sp3)-H bonds

Enantioenriched chiral amines are of exceptional importance in the pharmaceutical industry. Recently, several new methods for the installation of these functional groups directly from non-acidic C(sp3)-H bonds by catalytic intermolecular enantioselective amination have been reported. These methods represent significant advances of the field and most of them display high levels of enantioselectivity, utilize the C(sp3)-H substrate as the limiting reagent, feature good functional group tolerance, and show compatibility with late-stage C(sp3)-H amination of advanced substrates. This perspective provides an overview of the recent developments in this rapidly advancing field and outlines possibilities and limitations, which will help identify unsolved challenges and guide future research efforts.

Is Enol Always the Culprit? The Curious Case of High Enantioselectivity in a Chiral Rh(II) Complex Catalyzed Carbene Insertion Reaction

The mechanism of Rh2 (S-NTTL)4 catalyzed carbene insertion into C(3)-H of indole is investigated using DFT methods. Since the commonly accepted enol mechanism cannot account for enantioinduction, a concerted oxocarbenium pathway was proposed in an earlier work using a model catalyst. However, after considering the full catalytic system, this study finds that akin to other reactions, here, too, the enol pathway is of lower energy, which now naturally raises a conundrum regarding the mode of chiral induction. Herein, a new water promoted mechanistic pathway involving a metal-associated enol intermediate hydrogen bonding and stereochemical model are proposed to solve this puzzle. It is shown how the catalyst bowl-shaped structure along with substrate-catalyst binding is crucial for achieving high levels of enantioselectivity. A stereodetermining water-assisted proton transfer is proposed and confirmed through deuterium-labeling experiments. The water molecules are held together by H-bonding interactions with the carboxylate ligands that is reminiscent of enzyme catalysis. Although several previous studies have aimed at understanding the mechanism of metal catalyzed carbene insertion reactions, the origin of high stereoinduction especially with chiral metal complexes remains unclear, and till date there is no transition state model that can explain the high enantioselectivity with such chiral Rh complexes. The metal-associated enol pathway is currently underrepresented in catalytic cycles and may play a crucial role in catalyst design. Since the enol pathway is commonly adopted in other metal-catalyzed X-H insertion reactions involving a diazoester, the presented results are not specific to the current reaction. Therefore, this study could provide the direction for achieving high levels of enantioselectivity which is otherwise difficult to achieve with a single metal catalyst.

A Proline-Squaraine Ligand Framework (Pro-SqEB) for Stereoselective Rhodium(II)-Catalyzed Cyclopropanations

A proline-squaraine ligand (Pro-SqEB) that demonstrates high levels of stereoselectivity in olefin cyclopropanations when anchored to a Rh2II scaffold is introduced. High yields and enantioselectivities were achieved in the cyclopropanation of alkenes with diazo compounds in the presence of Rh2(Pro-SqEB)4. Notably, the unique electronic and steric design of this catalyst enabled the use of polar solvents that are otherwise incompatible with most RhII complexes.

Ruthenium-Catalyzed Chemo-Selective Carbene Insertion into C-H Bond of Styrene over Cyclopropanation: C-C Bond Formation

The C-C bond formation reactions are important in organic synthesis. Heck reaction is known to arylate the terminal carbon of olefins; however, direct alkylation of the terminal carbon of olefin is limited. Herein, we report a novel ruthenium-catalyzed selective cross-coupling reaction of styrene and α-diazoesters to form a new C-C bond over cyclopropanation via the C-H insertion process for the first time. Using this novel methodology, a wide variety of substrates have been utilized and a variety of α-vinylated benzylic esters and densely functionalized olefins have been synthesized with good stereoselectivity under mild reaction conditions. The overall reaction process proceeds through the carbene insertion into styrene to form the desired products in good to excellent yields with proper stereoselectivity. The selective C-H inserted product, wide substrate scope, and excellent functional group tolerance are the best features of this work.

Rh(I)-Catalyzed Cascade Carbonylative Cyclization of Propargyl α-Diazoindolacetates for Construction of Carbazoles

A Rh(I)-catalyzed carbene migration/carbonylation/cyclization (MCC) strategy has been established for the construction of diverse functionalized carbazoles from propargyl α-diazoindolacetates. Rh(I)-stabilized carbene with different electrophilic properties displays specific reactivity toward alkyne and CO during the transformation, ensuring the smooth progress of the tandem cyclization. Other heteroaryl scaffolds were achieved simultaneously through this cascade protocol, thus offering a straightforward pathway toward functionalized polycyclic aromatic molecule synthesis.

Development of Catalytic Site-Selective C-H Oxidation

Direct C-H bond oxygenation is a strong and useful tool for the construction of oxygen functional groups. After Chen and White's pioneering works, various non-heme-type iron and manganese complexes were introduced, leading to strong development in this area. However, for this method to become a truly useful tool for synthetic organic chemistry, it is necessary to make further efforts to improve site-selectivity, and catalyst durability. Recently, we found that non-heme-type ruthenium complex cis-1 presents efficient catalysis in C(sp3 )-H oxygenation under acidic conditions. cis-1-catalysed C-H oxygenation can oxidize various substrates including highly complex natural compounds using hypervalent iodine reagents as a terminal oxidant. Moreover, the catalyst system can use almost stoichiometric water molecules as the oxygen source through reversible hydrolysis of PhI(OCOR)2 . It is a strong tool for producing isotopic-oxygen-labelled compounds. Moreover, the environmentally friendly hydrogen peroxide can be used as a terminal oxidant under acidic conditions.

Borane catalyzed transesterification of tert-butyl esters using α-aryl α-diazoesters

The B(C6F5)3-catalyzed transesterification of a series of 3-alkenyl-oxindoles and other unsaturated tert-butyl esters with aryl-diazo esters is reported. This protocol is facile and generally high yielding proceeding under mild conditions and is remarkably chemoselective leaving the CC bonds intact.

Rh2(II)-Catalyzed Selective C(sp3)-H Bond Electrophilic Amination of Aryl Azide-Tethered 1,3-Dicarbonyl Compounds

Herein, we report the accomplishment of Rh2(II)-catalyzed intramolecular amination of aryl azide-tethered 1,3-dicarbonyls to access privileged heterocyclic scaffolds with exclusive diastereoselectivity under simple reaction conditions. This method also allows an unconventional direct α-amination at electron-deficient C(sp3)-H bonds of aryl azide-tethered 1,3-diketones to afford fused 2-azatricyclo[4.4.0.02,8]decanones and 2,2-disubstituted indolines, which are present in several biologically active alkaloids. Kinetic isotope experiments revealed that the nucleophilic addition of enol π-bonds on the transient electrophilic rhodium-nitrenoid intermediate enables C-N bond formation.

Photoelectrochemical oxidative C(sp3)-H borylation of unactivated hydrocarbons

Organoboron compounds are of high significance in organic synthesis due to the unique versatility of boryl substituents to access further modifications. The high demand for the incorporation of boryl moieties into molecular structures has witnessed significant progress, particularly in the C(sp3)-H borylation of hydrocarbons. Taking advantage of special characteristics of photo/electrochemistry, we herein describe the development of an oxidative C(sp3)-H borylation reaction under metal- and oxidant-free conditions, enabled by photoelectrochemical strategy. The reaction exhibits broad substrate scope (>57 examples), and includes the use of simple alkanes, halides, silanes, ketones, esters and nitriles as viable substrates. Notably, unconventional regioselectivity of C(sp3)-H borylation is achieved, with the coupling site of C(sp3)-H borylation selectively located in the distal methyl group. Our method is operationally simple and easily scalable, and offers a feasible approach for the one-step synthesis of high-value organoboron building blocks from simple hydrocarbons, which would provide ample opportunities for drug discovery.

Pd-Catalyzed Regioselective Cyclopropanation of 2-Substituted 1,3-Dienes

A Pd-catalyzed 3,4-regioselective cyclopropanation of 2-substituted 1,3-dienes by decomposition of diazo esters is reported. The vinylcyclopropanes generated are isolated in practical chemical yields with high levels of regioselectivity but low diastereoselectivity. The system operates under mild reaction conditions, is scalable, and tolerates various sensitive functional groups. A series of original postcatalytic derivatizations is presented to highlight the synthetic potential of the catalytic method.

Carbene Formation or Reduction of the Diazo Functional Group? An Unexpected Solvent-Dependent Reactivity of Cyclic Diazo Imides

The control of the reactivity of diazo compounds is commonly achieved by the choice of a suitable catalyst, e.g. via stabilization of singlet carbenes or radical intermediates. Herein, we report on the light-promoted reactivity of cyclic diazo imides with thiols, where the choice of solvent results in two fundamentally different reaction pathways. In dichloromethane (DCM), a carbene is formed initially and engages in a cascade C-H functionalization/thiolation reaction to deliver indane-fused pyrrolidines in good to excellent yields. When switching to acetonitrile solvent, the carbene pathway is shut down and an unusual reduction of the diazo compound occurs under otherwise identical reaction conditions, where the aryl thiol acts as reductant. A combined set of experimental and computational studies was carried out to obtain mechanistic understanding and to support that indane formation proceeds via the insertion of a triplet carbene, while the reduction of diazo imides proceeds via an electron transfer process.

Computational Mechanistic Investigations of Biocatalytic Nitrenoid C-H Functionalizations via Engineered Heme Proteins

Engineered heme proteins were developed to possess numerous excellent biocatalytic nitrenoid C-H functionalizations. Computational approaches such as density functional theory (DFT), hybrid quantum mechanics/molecular mechanics (QM/MM), and molecular dynamics (MD) calculations were employed to help understand some important mechanistic aspects of these heme nitrene transfer reactions. This review summarizes advances of computational reaction pathway results of these biocatalytic intramolecular and intermolecular C-H aminations/amidations, focusing on mechanistic origins of reactivity, regioselectivity, enantioselectivity, diastereoselectivity as well as effects of substrate substituent, axial ligand, metal center, and protein environment. Some important common and distinctive mechanistic features of these reactions were also described with brief outlook of future development.

Rhodium-Catalyzed Asymmetric C-H Functionalization Reactions

This review summarizes the advancements in rhodium-catalyzed asymmetric C-H functionalization reactions during the last two decades. Parallel to the rapidly developed palladium catalysis, rhodium catalysis has attracted extensive attention because of its unique reactivity and selectivity in asymmetric C-H functionalization reactions. In recent years, Rh-catalyzed asymmetric C-H functionalization reactions have been significantly developed in many respects, including catalyst design, reaction development, mechanistic investigation, and application in the synthesis of complex functional molecules. This review presents an explicit outline of catalysts and ligands, mechanism, the scope of coupling reagents, and applications.