Lower-crustal intrusion on the North Atlantic continental margin

Simultaneous rift-scale inflation of a deep crustal sill network in Afar, East Africa

Decades of studies at divergent plate margins have revealed networks of magmatic sills at the crust-mantle boundary. However, a lack of direct observations of deep magma motion limits our understanding of magma inflow from the mantle into the lower crust and the mechanism of sill formation. Here, satellite geodesy reveals rift-scale deformation caused by magma inflow in the deep crust in the Afar rift (East Africa). Simultaneous inflation of four sills, laterally separated by 10s of km and at depths ranging 9-28 km, caused uplift across a ~ 100-km-wide zone, suggesting the sills are linked to a common mantle source. Our results show the supply of magma into the lower crust is temporally episodic, occurring across a network of sills. This process reflects inherent instability of melt migration through porous mantle flow and may be the fundamental process that builds the thick igneous crust beneath magmatic rifts and rifted margins globally.

Vestiges of the Pre-Caledonian Passive Margin of Baltica in the Scandinavian Caledonides: Overview, Revisions and Control on the Structure of the Mountain Belt

The Pre-Caledonian margin of Baltica has been outlined as a tapering wedge with increasing magmatism towards the ocean–continent transition. It is, however, well known that margins are complex, with different and diachronous evolution along and across strike. Baltica’s vestiges in the Scandes have complexities akin to modern margins. It included a microcontinent and magma-poor hyperextended and magma-rich segments. It was probably up to 1500 km wide before distal parts were affected by plate convergence. Characteristic features are exhumed mantle peridotites and their detrital equivalents, some exposed to the seafloor by the pre-orogenic hyperextension. A major change in the architecture of the mountain belt occurred across the NW–SE trending Sveconorwegian front in the Baltican basement. This coincided with the NE termination of the Jotun-Lindås-Dalsfjord basement nappes, the remains of the Jotun Microcontinent (JMC) formed by hyperextension prior to the orogeny. Mantle with ophicalcite breccias exhumed by hyperextension are covered by deep-marine sediments and local conglomerates. Baltican basement slivers are common in the transitional crust basins. Outboard the JMC, the margin was magma-rich. The main break-up magmatism at 605 ± 10 Ma was part of the vast Central Iapetus Magmatic Province. The along-strike heterogeneity of the margin controlled diachronous and contrasting tectonic evolution during the later Caledonian plate convergence and collision.

Melt volume at Atlantic volcanic rifted margins controlled by depth-dependent extension and mantle temperature

Breakup volcanism along rifted passive margins is highly variable in time and space. The factors controlling magmatic activity during continental rifting and breakup are not resolved and controversial. Here we use numerical models to investigate melt generation at rifted margins with contrasting rifting styles corresponding to those observed in natural systems. Our results demonstrate a surprising correlation of enhanced magmatism with margin width. This relationship is explained by depth-dependent extension, during which the lithospheric mantle ruptures earlier than the crust, and is confirmed by a semi-analytical prediction of melt volume over margin width. The results presented here show that the effect of increased mantle temperature at wide volcanic margins is likely over-estimated, and demonstrate that the large volumes of magmatism at volcanic rifted margin can be explained by depth-dependent extension and very moderate excess mantle potential temperature in the order of 50-80 °C, significantly smaller than previously suggested.

Limited and localized magmatism in the Central Atlantic Magmatic Province

The Central Atlantic Magmatic Province (CAMP) is the most aerially extensive magmatic event in Earth’s history, but many questions remain about its origin, volume, and distribution. Despite many observations of CAMP magmatism near Earth’s surface, few constraints exist on CAMP intrusions at depth. Here we present detailed constraints on crustal and upper mantle structure from wide-angle seismic data across the Triassic South Georgia Rift that formed shortly before CAMP. Lower crustal magmatism is concentrated where synrift sedimentary fill is thickest and the crust is thinnest, suggesting that lithospheric thinning influenced the locus and volume of magmatism. The limited distribution of lower crustal intrusions implies modest total CAMP volumes of 85,000 to 169,000 km³ beneath the South Georgia Rift, consistent with moderately elevated mantle potential temperatures (<1500 °C). These results suggest that CAMP magmatism in the South Georgia Rift is caused by syn-rift decompression melting of a warm, enriched mantle.

The Central Atlantic Magmatic Province is the most aerially extensive magmatic event in Earth’s history, yet few constraints exist on the volumes of intrusions at depth. Here, the authors find limited intrusive volumes beneath the South Georgia Rift, consistent with modest potential mantle temperatures (<1500 °C) related to syn-rift decompression melting.

Melt movement through the Icelandic crust

We use both seismology and geobarometry to investigate the movement of melt through the volcanic crust of Iceland. We have captured melt in the act of moving within or through a series of sills ranging from the upper mantle to the shallow crust by the clusters of small earthquakes it produces as it forces its way upward. The melt is injected not just beneath the central volcanoes, but also at discrete locations along the rift zones and above the centre of the underlying mantle plume. We suggest that the high strain rates required to produce seismicity at depths of 10-25 km in a normally ductile part of the Icelandic crust are linked to the exsolution of carbon dioxide from the basaltic melts. The seismicity and geobarometry provide complementary information on the way that the melt moves through the crust, stalling and fractionating, and often freezing in one or more melt lenses on its way upwards: the seismicity shows what is happening instantaneously today, while the geobarometry gives constraints averaged over longer time scales on the depths of residence in the crust of melts prior to their eruption. This article is part of the Theo Murphy meeting issue 'Magma reservoir architecture and dynamics'.

Chapter 4 Cenozoic rifting, passive margin development and strike-slip faulting in the Andaman Sea: a discussion of established v. new tectonic models

The Andaman Sea evolved from near-pure extension (WNW–ESE) during the Late Palaeogene, to highly oblique extension (NNW–SSE) during the Neogene, to strike-slip-dominated deformation (Late Miocene–Recent). These changes in extension direction and deformation style probably reflect the switch from slab rollback-driven extension to India coupling with Myanmar and driving oblique extension/dextral strike-slip. The East Andaman, Mergui–North Sumatra and Martaban Shelf basins, along with the Alcock and Sewell rises and Central Andaman Basin (CAB), were all involved with this deformation which became increasingly focused on the CAB and the rises with time. Possible revisions to traditional models for the Andaman Sea include: (1) the Alcock and Sewell rises are hyper-extended continental or island arc crust, not Miocene oceanic crust; (2) the East Andaman Basin is predominantly underlain by strongly necked to hyper-extended continental crust, not oceanic crust; or (3) CAB oceanic crust is of Miocene, not Pliocene–Recent age. At present a number of major issues can be addressed but not fully resolved, including: (1) the distribution, timing, volume and origin of magmatism in the basins; (2) the causes and significance of strong crustal reflections imaged on 2D and 3D seismic data; (3) implications for crustal thinning geometries, upper crustal extensional patterns and distribution of igneous intrusions for current models of passive margin development (i.e. volcanic v. non-volcanic margins), and how the back-arc setting modifies these models. Elements of both volcanic and non-volcanic margins are present in the East Andaman Sea, with well-developed necking of continental crust (perhaps due to dry mafic, granulite facies lower crust) and extensive igneous intrusions in the lower and middle crust.

The initiation of segmented buoyancy-driven melting during continental breakup

Melting of the mantle during continental breakup leads to magmatic intrusion and volcanism, yet our understanding of the location and dominant mechanisms of melt generation in rifting environments is impeded by a paucity of direct observations of mantle melting. It is unclear when during the rifting process the segmented nature of magma supply typical of seafloor spreading initiates. Here, we use Rayleigh-wave tomography to construct a high-resolution absolute three-dimensional shear-wave velocity model of the upper 250 km beneath the Afar triple junction, imaging the mantle response during progressive continental breakup. Our model suggests melt production is highest and melting depths deepest early during continental breakup. Elevated melt production during continental rifting is likely due to localized thinning and melt focusing when the rift is narrow. In addition, we interpret segmented zones of melt supply beneath the rift, suggesting that buoyancy-driven active upwelling of the mantle initiates early during continental rifting.

Volcanic passive margins: another way to break up continents

Two major types of passive margins are recognized, i.e. volcanic and non-volcanic, without proposing distinctive mechanisms for their formation. Volcanic passive margins are associated with the extrusion and intrusion of large volumes of magma, predominantly mafic, and represent distinctive features of Larges Igneous Provinces, in which regional fissural volcanism predates localized syn-magmatic break-up of the lithosphere. In contrast with non-volcanic margins, continentward-dipping detachment faults accommodate crustal necking at both conjugate volcanic margins. These faults root on a two-layer deformed ductile crust that appears to be partly of igneous nature. This lower crust is exhumed up to the bottom of the syn-extension extrusives at the outer parts of the margin. Our numerical modelling suggests that strengthening of deep continental crust during early magmatic stages provokes a divergent flow of the ductile lithosphere away from a central continental block, which becomes thinner with time due to the flow-induced mechanical erosion acting at its base. Crustal-scale faults dipping continentward are rooted over this flowing material, thus isolating micro-continents within the future oceanic domain. Pure-shear type deformation affects the bulk lithosphere at VPMs until continental breakup, and the geometry of the margin is closely related to the dynamics of an active and melting mantle.

Aspects of marine geoscience: a review and thoughts on potential for observing active processes and progress through collaboration between the ocean sciences

Much progress has been made in the UK in characterizing the internal structures of major physiographic features in the oceans and in developing understanding of the geological processes that have created or shaped them. UK researchers have authored articles of high impact in all areas described here. In contrast to terrestrial geoscience, however, there have been few instrumented observations made of active processes by UK scientists. This is an area that could be developed over the next decades in the UK. Research on active processes has the potential ability to engage the wider public: Some active processes present significant geo-hazards to populations and offshore infrastructure that require monitoring and there could be commercial applications of technological developments needed for science. Some of the suggestions could involve studies in shallow coastal waters where ship costs are much reduced, addressing tighter funding constraints over the near term. The possibilities of measuring aspects of volcanic eruptions, flowing lava, turbidity currents and mass movements (landslides) are discussed. A further area of potential development is in greater collaboration between the ocean sciences. For example, it is well known in terrestrial geomorphology that biological agents are important in modulating erosion and the transport of sediments, ultimately affecting the shape of the Earth's surface in various ways. The analogous effect of biology on large-scale geomorphology in the oceans is also known but remains poorly quantified. Physical oceanographic models are becoming increasingly accurate and could be used to study further the patterns of erosion, particle transport and deposition in the oceans. Marine geological and geophysical data could in turn be useful for further verification of such models. Adapting them to conditions of past oceans could address the shorter-period movements, such as due to internal waves and tides, which have been barely addressed in palaeoceanography.

The breakup of the South Atlantic Ocean: formation of failed spreading axes and blocks of thinned continental crust in the Santos Basin, Brazil and its consequences for petroleum system development

The occurrence of failed breakup basins and deepwater blocks of thinned continental crust is commonplace in the rifting and breakup of continents, as part of passive margin development. This paper examines the rifting of Pangaea–Gondwanaland and subsequent breakup to form the South Atlantic Ocean, with development of a failed breakup basin and seafloor spreading axis (the deepwater Santos Basin) and an adjacent deepwater block of thinned continental crust (the Sao Paulo Plateau) using a combination of 2D flexural backstripping and gravity inversion modelling. The effects of the varying amounts of continental crustal thinning on the contrasting depositional and petroleum systems in the Santos Basin and on the São Paulo Plateau are discussed, the former having a predominant post-breakup petroleum system compared with a pre-breakup system in the latter. An analogy is also made to a potentially similar failed breakup basin/thinned continental crustal block pairing in the Faroes region in the NE Atlantic Ocean.

Magma-compensated crustal thinning in continental rift zones

Continental rift zones are long, narrow tectonic depressions in the Earth's surface where the entire lithosphere has been modified in extension. Rifting can eventually lead to rupture of the continental lithosphere and creation of new oceanic lithosphere or, alternatively, lead to formation of wide sedimentary basins around failed rift zones. Conventional models of rift zones include three characteristic features: surface manifestation as an elongated topographic trough, Moho shallowing due to crustal thinning, and reduced seismic velocity in the uppermost mantle due to decompression melting or heating from the Earth's interior. Here we demonstrate that only the surface manifestation is observed at the Baikal rift zone, whereas the crustal and mantle characteristics can be ruled out by a new seismic profile across southern Lake Baikal in Siberia. Instead we observe a localized zone in the lower crust which has exceptionally high seismic velocity and is highly reflective. We suggest that the expected Moho uplift was compensated by magmatic intrusion into the lower crust, producing the observed high-velocity zone. This finding demonstrates a previously unknown role for magmatism in rifting processes with significant implications for estimation of stretching factors and modelling of sedimentary basins around failed rift structures.