Dimensionality-driven insulator-metal transition in A-site excess non-stoichiometric perovskites

Atomic-scale observation of premelting at 2D lattice defects inside oxide crystals

Since two major criteria for melting were proposed by Lindemann and Born in the early 1900s, many simulations and observations have been carried out to elucidate the premelting phenomena largely at the crystal surfaces and grain boundaries below the bulk melting point. Although dislocations and clusters of vacancies and interstitials were predicted as possible origins to trigger the melting, experimental direct observations demonstrating the correlation of premelting with lattice defects inside a crystal remain elusive. Using atomic-column-resolved imaging with scanning transmission electron microscopy in polycrystalline BaCeO₃, here we clarify the initiation of melting at two-dimensional faults inside the crystals below the melting temperature. In particular, melting in a layer-by-layer manner rather than random nucleation at the early stage was identified as a notable finding. Emphasizing the value of direct atomistic observation, our study suggests that lattice defects inside crystals should not be overlooked as preferential nucleation sites for phase transformation including melting.

Application of porosities in the transparent electrode layer of a perovskite solar cell for performance enhancement

Substitution of monocrystalline or polycrystalline silicon as active materials in photovoltaics with highly efficient perovskite materials is quite common. Although perovskite materials offer better flexibility, are cost-effective, and have higher conversion efficiency, they still require structural modifications for better performance. This study quantitatively investigates how mesoporous top surfaces improve the performance of methylammonium lead iodide (C H ₃ N H ₃ P b I ₃) perovskite solar cells. In fact, both the diameter and the depth of the pores have been tuned to achieve better performance. The performance is further optimized by replacing mesoporous active material with planar active material coated with mesoporous indium tin oxide (ITO). We have demonstrated that the proposed structure achieves the maximum conversion efficiency (η) of 27.43% with an open-circuit voltage (V _{O C} ) of 1.07 V and a short circuit current density (J _{S C} ) of 29.09m A/c m ², with a fill factor (FF) of 88.10%.

Local-electrostatics-induced oxygen octahedral distortion in perovskite oxides and insight into the structure of Ruddlesden-Popper phases

As the physical properties of ABX₃ perovskite-based oxides strongly depend on the geometry of oxygen octahedra containing transition-metal cations, precise identification of the distortion, tilt, and rotation of the octahedra is an essential step toward understanding the structure-property correlation. Here we discover an important electrostatic origin responsible for remarkable Jahn-Teller-type tetragonal distortion of oxygen octahedra during atomic-level direct observation of two-dimensional [AX] interleaved shear faults in five different perovskite-type materials, SrTiO₃, BaCeO₃, LaCoO₃, LaNiO₃, and CsPbBr₃. When the [AX] sublayer has a net charge, for example [LaO]⁺ in LaCoO₃ and LaNiO₃, substantial tetragonal elongation of oxygen octahedra at the fault plane is observed and this screens the strong repulsion between the consecutive [LaO]⁺ layers. Moreover, our findings on the distortion induced by local charge are identified to be a general structural feature in lanthanide-based A_n + 1B_nX_3n + 1-type Ruddlesden-Popper (RP) oxides with charged [LnO]⁺ (Ln = La, Pr, Nd, Eu, and Gd) sublayers, among more than 80 RP oxides and halides with high symmetry. The present study thus demonstrates that the local uneven electrostatics is a crucial factor significantly affecting the crystal structure of complex oxides.

Porous 2D and 3D Covalent Organic Frameworks with Dimensionality-Dependent Photocatalytic Activity in Promoting Radical Ring-Opening Polymerization

Dimensionality is a fundamental parameter to modulate the properties of solid materials by tuning electronic structures. Covalent organic frameworks (COFs) are a prominent class of porous crystalline materials, but the study of dimensional dependence on their physicochemical properties is still lacking. Herein we illustrate photocatalytic performances of N,N-diaryl dihydrophenazine (PN)-based COFs are heavily dependent on the structural dimensionality. Six isostructural imine-bonded 2D-PN COFs and one 3D-PN COF were prepared. All can be heterogeneous photocatalysts to promote radical ring-opening polymerization of vinylcyclopropanes (VCPs), which typically produces polymers with a combination of linear (l) and cyclic (c) repeat units. The 2D-PN COFs have much higher catalytic activity than the 3D-PN COF, allowing the efficient synthesis of poly(VCPs) with controlled molecular weight, low dispersity and high l/c selectivity (up to 97 %). The improved performance can be ascribed to the 2D structure which has a larger internal surface area, more catalytically active sites, higher photosensitizing ability and photoinduced electron transfer efficiency.

Effect of Lattice Strain on the Formation of Ruddlesden-Popper Faults in Heteroepitaxial LaNiO3 for Oxygen Evolution Electrocatalysis

A great deal of research has recently been focused on Ruddlesden-Popper (RP) two-dimensional planar faults consisting of intervened [AO] monolayers in an ABO₃ perovskite framework due to the structurally peculiar shear configuration. In this work, we scrutinize the effect of elastic strain on the generation behavior of RP faults, which are electrocatalytically very active sites for the oxygen evolution reaction (OER), in (001) epitaxial LaNiO₃ thin films through by using two distinct single-crystal substrates with different cubic lattice parameters. Atomic-scale direct observations reveal that RP faults can be more favorably created when tensile misfit strain is exerted. Furthermore, we demonstrate that the controlled growth of thin films show notably enhanced OER activity by the RP faults. The findings in this study highlight the impact of symmetry-breaking defect formation for better oxygen electrocatalysis in perovskite oxides.

Dimensionality Control of Electrocatalytic Activity in Perovskite Nickelates

The dimensionality of the crystal structure plays an important role in the electronic structures of materials. Ruddlesden-Popper perovskite oxides offer an attractive platform for studying this role due to dimensional flexibility. The effects of dimensionality on physical properties in those oxides have been widely reported. However, the study of dimensional dependence on the chemical properties is still lacking. Here, we synthesized a series of Ruddlesden-Popper perovskite nickelates La_nSrNi_nO_3n+1 (n = 1, 2, 3, and ∞) to explore the role of dimensionality on oxygen-evolution reaction (OER) performance. As the dimensionality increased with n, the nickelates exhibited an enhanced OER activity. We found that the weakening of electron correlations among Ni 3d electrons by increasing the dimensionality induced an insulator-to-metal transition and a strengthened Ni-O hybridization, both of which accelerated the OER kinetics. This work sets up a bridge between the dimensionality and electrocatalysis, which provides guidance for designing highly efficient oxygen-evolving catalysts.

Anomalous oxidation and its effect on electrical transport originating from surface chemical instability in large-area, few-layer 1T'-MoTe2 films

Two-dimensional (Mo,W)Te2 films have recently attracted significant research interest as electronic device channel materials, topological insulators and Weyl semimetals. However, one critical concern that can hamper their diverse applications is surface chemical instability due to weak Mo(W)-Te bond energy reflected in the small electronegativity difference between Mo(W) and Te, which fundamentally induces unpredictable surface oxidation and remarkably affects the film electrical transport. Here, for the first time, we clarify an anomalous oxidation featuring an unbalanced oxidation process in large-area, few-layer 1T'-MoTe2, which originates from the surface chemical instability. We identify the oxidation temperature, oxygen flow rate, structural polymorphism, and atomic chemical bond electronegativity that dominate preferential surface oxidation, which can be monitored by the appearance and decomposition of Raman-active Te metalloids. Importantly, we verify the formation of an ultrathin natural amorphous MoO3-TeO2 surface layer with an approximate self-limiting thickness that significantly affects the transport properties of the underlying few-layer 1T'-MoTe2 film. We also reveal a similar oxidation tendency in few-layer 2H-MoTe2 and 1T'-WTe2 but with a higher resistance to oxidation than 1T'-MoTe2 due to their inherent phase stability. Our findings not only represent a strong advancement in understanding surface chemical instability of atomically thin 2D TMDC materials, but also highlight technically essential importance of constructing ultrathin natural oxide dielectrics/TMDC interfaces with a controllable surface oxidation process for atomically thin TMDC-based devices.

Flexible supercapacitor electrodes based on real metal-like cellulose papers

The effective implantation of conductive and charge storage materials into flexible frames has been strongly demanded for the development of flexible supercapacitors. Here, we introduce metallic cellulose paper-based supercapacitor electrodes with excellent energy storage performance by minimizing the contact resistance between neighboring metal and/or metal oxide nanoparticles using an assembly approach, called ligand-mediated layer-by-layer assembly. This approach can convert the insulating paper to the highly porous metallic paper with large surface areas that can function as current collectors and nanoparticle reservoirs for supercapacitor electrodes. Moreover, we demonstrate that the alternating structure design of the metal and pseudocapacitive nanoparticles on the metallic papers can remarkably increase the areal capacitance and rate capability with a notable decrease in the internal resistance. The maximum power and energy density of the metallic paper-based supercapacitors are estimated to be 15.1 mW cm⁻² and 267.3 μWh cm⁻², respectively, substantially outperforming the performance of conventional paper or textile-type supercapacitors.

With ligand-mediated layer-by-layer assembly between metal nanoparticles and small organic molecules, the authors prepare metallic paper electrodes for supercapacitors with high power and energy densities. This approach could be extended to various electrodes for portable/wearable electronics.

Engineering the strongly correlated properties of bulk Ruddlesden-Popper transition metal oxides via self-doping

We demonstrate via first-principles calculations a novel method of tuning the electron-electron interactions in bulk oxide materials via controlling the cationic layer arrangement. Using the Ruddlesden-Popper oxides LaSrMnO₄ and LaSrTiO₄ as examples, our study demonstrates that a self-doping effect can be induced by changing the stacking of the neutral and charged cationic layers. It is believed that such a phenomenon is associated with different movements of apical oxygen atoms, resulting in diverse bandgaps, magnetism and orbital degrees of freedom in the same stoichiometric strongly-correlated material. This finding may open up a new direction to engineer the transition metal oxides for practical applications requiring tunable electronic properties without external doping.

Formation of Two-Dimensional Homologous Faults and Oxygen Electrocatalytic Activities in a Perovskite Nickelate

Atomic-scale direct probing of active sites and subsequent elucidation of the structure-activity relationship are important issues involving oxide-based electrocatalysts to achieve better electrochemical conversion efficiency. By generating Ruddlesden-Popper (RP) two-dimensional homologous faults via simple control of the cation nonstoichiometry in LaNiO₃ thin films, we demonstrate that strong tetragonal distortion of [NiO₆] octahedra is induced by more than 20% elongation of Ni-O bonds in the faults. In addition to direct visualization of the elongation by scanning transmission electron microscopy, we identify that the distorted [NiO₆] octahedra in the faults show considerably higher electrocatalytic activities than other surface sites during the electrochemical oxygen evolution reaction. This unequivocal evidence of the octahedral distortion and its impact on electrocatalysis in LaNiO₃ suggests that the formation of RP-type faults can provide an efficient way to control the octahedral geometry and thereby remarkably enhance the oxygen catalytic performance of perovskite oxides.

Interfacial defects induced electronic property transformation at perovskite SrVO3/SrTiO3 and LaCrO3/SrTiO3 heterointerfaces

Unravelling the atomic structure and chemical species of interfacial defects is critical to understanding the origin of interfacial properties in many heterojunctions.

Planar Vacancies in Sn1-xBixTe Nanoribbons

Vacancy engineering is a crucial approach to manipulate physical properties of semiconductors. Here, we demonstrate that planar vacancies are formed in Sn1-xBixTe nanoribbons by using Bi dopants via a facile chemical vapor deposition. Through combination of sub-angstrom-resolution imaging and density functional theory calculations, these planar vacancies are found to be associated with Bi segregations, which significantly lower their formation energies. The planar vacancies exhibit polymorphic structures with local variations in the lattice relaxation level, determined by their proximity to the nanoribbon surface. Such polymorphic planar vacancies, in conjunction with Bi dopants, trigger distinct localized electronic states, offering platforms for device applications of ternary chalcogenide materials.

Synthesis of carbon fiber@nickel oxide nanosheet core–shells for high-performance supercapacitors

We report on the design and synthesis of CFs@NiO-NSs by growing nickel oxide nanosheets (NiO-NSs) on carbon fibers (CFs), and find that the system shows a more enhanced electrochemical performance.