Modulator-free quadrature amplitude modulation signal synthesis

Cascaded optically injection-locked semiconductor laser, rate equations analysis, frequency response, and its application for complex optical signal generation

In this paper, we introduce the concept of the cascaded optically injection-locked (OIL) semiconductor laser and present its novel rate equations. Then, the new locking range for this configuration has been obtained by mathematical demonstration. Subsequently, we modified a new adjustment for the detuning frequencies (Δ f i n j ) of the cascaded OIL system as well as the linewidth enhancement factors (α) values. Utilizing these tunings, improvements in the steady-state photon number and the phase modulation (PM) range become possible. Afterward, we define the generation of the complex optical signal area and extract the transfer function for investigating the frequency response of the cascaded system. The simulations have been performed once with identical α values and once with the various α values in the slave laser (SL) stages. We conclude that these novel proposed adjustments, combined with a strong injection ratio (Rinj) of 15 dB and a high bias current, can significantly broaden the bandwidth near 700 GHz while maintaining the fair gain available up to 180 GHz. Further, the generation of complex optical signal areas has been boosted for high-quality complex modulation applications. Eventually, we exhibit a novel approach for generating different α values in the SL stages by applying managed temperature variations in the experimental setup of the cascaded system, regardless of employing similar SLs.

Evaluation of Performance Enhancement of Optical Multi-Level Modulation Based on Direct Modulation of Optically Injection-Locked Semiconductor Lasers

The performance of optical M-level (multi-level) amplitude shift keying (ASK) modulation is improved by directly using modulated optically injection-locked (OIL) semiconductor lasers. The direct modulation performance of free-running and OIL semiconductor lasers is evaluated and compared theoretically based on coupled-rate equation. We have found that OIL semiconductor lasers can significantly improve the modulation performance in terms of the signal eye opening and Q-factor. Additionally, we found that the Q-factor increases even more in the negative frequency detuning range due to its dependence on the locking parameters.

Noise and distortion analysis of dual frequency comb photonic RF channelizers

Dual frequency combs are emerging as highly effective channelizers for radio frequency (RF) signal processing, showing versatile capabilities in various applications including Fourier signal mapping, analog-to-digital conversion and sub-sampling of sparse wideband signals. Although previous research has considered the impact of comb power and harmonic distortions in individual systems, a rigorous and comprehensive performance analysis is lacking, particularly regarding the impact of phase noise. This is especially important considering that phase noise power increases quadratically with comb line number. In this paper, we develop a theoretical model of a dual frequency comb channelizer and evaluate the signal to noise ratio limits and design challenges when deploying such systems in a high bandwidth signal processing context. We show that the performance of these dual comb based signal processors is limited by the relative phase noise between the two optical frequency combs, which to our knowledge has not been considered in previous literature. Our simulations verify the theoretical model and examine the stochastic noise contributions and harmonic distortion, followed by a broader discussion of the performance limits of dual frequency comb channelizers, which demonstrate the importance of minimizing the relative phase noise between the two frequency combs to achieve high signal-to-noise ratio signal processing.

Phase-sensitive amplifier-based optical conversion for direct detection of complex modulation format to bridge long-haul transmissions and short-reach interconnects

An optical conversion node scheme for direct detection of complex modulation format is proposed to bridge long-haul transmissions and short-reach interconnects. A noisy 10G Baud quadrature phase shift keying signal is converted into a 10G Baud normal 4-level pulse amplitude modulation (PAM4) signal by the node. The conversion node is realized mainly relies on four-wave mixing-based phase-sensitive amplifiers. The power ratio and constellation shape of the converted PAM4 both can be flexibly designed based on network demands and five kinds of uniform or non-uniform PAM4s are generated to verify the shaping functionality. With the input optical signal-to-noise ratio range of (10 dB∼30 dB), the key indicators of the signals went through every part are measured, includes constellations, eye diagrams, error vector magnitudes, bit error rates, normalized impact factors of phase and amplitude. The proposed node scheme has great application potential in intermediate nodes for bridging long-haul transmissions and short-reach interconnects, hierarchical modulation and flexible constellations design for advanced format signals.

Flexible generation of 28 Gbps PAM4 60 GHz/80 GHz radio over fiber signal by injection locking of direct multilevel modulated laser to spacing-tunable two-tone light

To meet the ever-increasing bandwidth demands in the future broadband wireless networks, the millimeter-wave (mm-wave) frequency region is being actively perused, owing to its broad bandwidth and high frequencies. In this paper, a photonic mm-wave system is proposed and experimentally demonstrated based on the injection locking of a direct multilevel modulated laser to a spacing-tunable two-tone light. Since the mm-wave frequency of the generated signal is locked to the frequency spacing of the injected two-tone light, it shows better frequency stabilization than the schemes based on two free-running lasers. Moreover, by simply tuning the tone spacing, the mm-wave frequency could be easily re-configured, offering flexibility in the mm-wave signal generation. Instead of using complex and expensive optical modulators, the multilevel modulation on the mm-wave data carrier is implemented through the direct multilevel modulation of a laser and the injection locking. A 28 Gbps four-level pulse amplitude modulation (PAM4) is realized by biasing a 10 G-class laser at a current far from the threshold, providing a cost-effective and simple mm-wave generation scheme. In the experiment, a photonic approach to generating 28 Gbps PAM4 60 GHz/80 GHz mm-wave signals is experimentally demonstrated. A power penalty of less than 0.2 dB is observed for the filtered-out PAM4 signals with respect to the original PAM4. Besides, an ultra-low phase noise of up to -98 dBc/Hz is obtained for the mm-wave carriers after the injection locking. The proposed scheme possesses the flexibility and frequency stability of the mm-wave frequency, and also has low cost and implementation complexity.

Parallel Polarization State Generation

The control of polarization, an essential property of light, is of wide scientific and technological interest. The general problem of generating arbitrary time-varying states of polarization (SOP) has always been mathematically formulated by a series of linear transformations, i.e. a product of matrices, imposing a serial architecture. Here we show a parallel architecture described by a sum of matrices. The theory is experimentally demonstrated by modulating spatially-separated polarization components of a laser using a digital micromirror device that are subsequently beam combined. This method greatly expands the parameter space for engineering devices that control polarization. Consequently, performance characteristics, such as speed, stability, and spectral range, are entirely dictated by the technologies of optical intensity modulation, including absorption, reflection, emission, and scattering. This opens up important prospects for polarization state generation (PSG) with unique performance characteristics with applications in spectroscopic ellipsometry, spectropolarimetry, communications, imaging, and security.

Towards high-order modulation using complex modulation of semiconductor lasers

Optical communication using high-speed on-off-keying signal by directly modulated semiconductor lasers (DML) was one of the most significant breakthroughs for telecommunication in 1960s. The wide deployment of 2.5-Gb/s per-channel transoceanic optical fiber links in 1990s drove the internet as a global phenomenon. However, the detrimental frequency chirp of DML prevents its application to the subsequent internet capacity evolution. Today, the state-of-the-art long-haul optical transponder uses external modulators to support high-order complex modulation. In contrast, this paper shows that the "detrimental" chirp effect can be exploited to generate complex modulation with a single DML, which achieves dramatic sensitivity gain of signal-to-noise-ratio compared to the conventional intensity modulation of DML. By using large chirp parameters, complex-modulated DML paves an attractive pathway towards high-order pulse-amplitude modulation with an ultra-low transmitter cost, which has great potential in future medium reach optical communications.