Biosensing: new probes offer much faster results

Tuning Electronic and Functional Properties in Defected MoS2 Films by Surface Patterning of Sulphur Atomic Vacancies

Defects are inherent in transition metal dichalcogenides and significantly affect their chemical and physical properties. In this study, surface defect electrochemical nanopatterning is proposed as a promising method to tune in a controlled manner the electronic and functional properties of defective MoS₂ thin films. Using parallel electrochemical nanolithography, MoS₂ thin films are patterned, creating sulphur vacancy-rich active zones alternated with defect-free regions over a centimetre scale area, with sub-micrometre spatial resolution. The patterned films display tailored optical and electronic properties due to the formation of sulphur vacancy-rich areas. Moreover, the effectiveness of defect nanopatterning in tuning functional properties is demonstrated by studying the electrocatalytic activity for the hydrogen evolution reaction.

A microfluidic, dual-purpose sensor for in vitro detection of Enterobacteriaceae and biotinylated antibodies

In this paper, we present a versatile, dual-purpose sensor for in vitro detection of Enterobacteriaceae (e.g. Escherichia coli) and biotinylated antibodies (e.g. IgG rabbit polyclonal antibodies), based on different detection principles for each bioanalyte. These bioanalytes are tagged individually with functionalized magnetic microparticles, suspended into a static fluid and injected into a microfluidic channel. Without the need for bulk or complicated pumping systems, the functionalized microparticles are set in motion by a magnetic force exerted on them by integrated microconductors. The fundamental detection principle is the decrease in the velocity of the microparticles that are loaded with the respective bioanalyte, due to factors inhibiting their motion. The velocity of the unloaded, bare microparticles is used as a reference. We discovered a novel mechanism on which the constrained particle motion is based; in the case of E. coli, the inhibiting factor is the enhanced Stokes' drag force due to the greater volume and altered hydrodynamic shape, whereas in the case of biotinylated antibodies, it is the increased friction force at the interface between the modified microparticle and the biosensor's surface. Friction force is for the first time employed in a scheme for resolving biomolecules. Integrated magnetic microsensors are used for the velocity measurements by detecting the microparticles' stray field. Moreover, we developed a biocompatible, easy to implement and reliable surface modification that practically diminishes the problem of bioadhesion on the sensor's surface.

Particle Motion Analysis Reveals Nanoscale Bond Characteristics and Enhances Dynamic Range for Biosensing

Biofunctionalized colloidal particles are widely used as labels in bioanalytical assays, lab-on-chip devices, biophysical research, and in studies on live biological systems. With detection resolution going down to the level of single particles and single molecules, understanding the nature of the interaction of the particles with surfaces and substrates becomes of paramount importance. Here, we present a comprehensive study of motion patterns of colloidal particles maintained in close proximity to a substrate by short molecular tethers (40 nm). The motion of the particles (500-1000 nm) was optically tracked with a very high localization accuracy (below 3 nm). A surprisingly large variation in motion patterns was observed, which can be attributed to properties of the particle-molecule-substrate system, namely the bond number, the nature of the bond, particle protrusions, and substrate nonuniformities. Experimentally observed motion patterns were compared to numerical Monte Carlo simulations, revealing a close correspondence between the observed motion patterns and properties of the molecular system. Particles bound via single tethers show distinct disc-, ring-, and bell-shaped motion patterns, where the ring- and bell-shaped patterns are caused by protrusions on the particle in the direct vicinity of the molecular attachment point. Double and triple tethered particles exhibit stripe-shaped and triangular-shaped motion patterns, respectively. The developed motion pattern analysis allows for discrimination between particles bound by different bond types, which opens the possibility to improve the limit of detection and the dynamic range of bioanalytical assays, with a projected increase of dynamic range by nearly 2 orders of magnitude.

High performance wash-free magnetic bioassays through microfluidically enhanced particle specificity

Magnetic biosensors have emerged as a sensitive and versatile platform for high performance medical diagnostics. These magnetic biosensors require well-tailored magnetic particles as detection probes, which need to give rise to a large and specific biological signal while showing very low nonspecific binding. This is especially important in wash-free bioassay protocols, which do not require removal of particles before measurement, often a necessity in point of care diagnostics. Here we show that magnetic interactions between magnetic particles and magnetized sensors dramatically impact particle transport and magnetic adhesion to the sensor surfaces. We investigate the dynamics of magnetic particles’ biomolecular binding and magnetic adhesion to the sensor surface using microfluidic experiments. We elucidate how flow forces can inhibit magnetic adhesion, greatly diminishing or even eliminating nonspecific signals in wash-free magnetic bioassays, and enhancing signal to noise ratios by several orders of magnitude. Our method is useful for selecting and optimizing magnetic particles for a wide range of magnetic sensor platforms.

Miniaturization of a micro-optics array for highly sensitive and parallel detection on an injection moulded lab-on-a-chip

A miniaturised array of supercritical angle fluorescence (SAF) micro-optics embedded in a microfluidic chamber was fabricated by injection moulding. The fabricated chip could enhance the fluorescence signal around 46 times compared to a conventional microscope. Collection of the fluorescence signal from the SAF array is almost independent of the numerical aperture, and the limit of detection was improved 36-fold using a simple and inexpensive optical detection system.

On-chip magnetometer for characterization of superparamagnetic nanoparticles

An on-chip magnetometer was fabricated by integrating a planar Hall magnetoresistive (PHR) sensor with microfluidic channels. The measured in-plane field sensitivities of an integrated PHR sensor with NiFe/Cu/IrMn trilayer structure were extremely high at 8.5 μV Oe(-1). The PHR signals were monitored during the oscillation of 35 pL droplets of magnetic nanoparticles, and reversed profiles for the positive and negative z-fields were measured, where magnitudes increased with the applied z-field strength. The measured PHR signals for 35 pL droplets of magnetic nanoparticles versus applied z-fields showed excellent agreement with magnetization curves measured by a vibrating sample magnetometer (VSM) of 3 μL volume, where a PHR voltage of 1 μV change is equivalent to 0.309 emu cc(-1) of the volume magnetization with a magnetic moment resolution of ~10(-10) emu.

Magnetic particles in ultrasensitive biomarker protein measurements for cancer detection and monitoring

IMPORTANCE OF THE FIELD: Devices for the reliable detection of panels of biomarker proteins facilitated by magnetic bead-based technologies have the potential to greatly improve future cancer diagnostics. The reason for this review is to highlight promising research on emerging procedures for protein capture, transport and detection featuring magnetic particles. AREAS COVERED IN THIS REVIEW: The review covers applications of magnetic particles in protein immunoassays in emerging research and commercial methods, and stresses multiplexed protein assays for reliable future cancer diagnostics. Research literature over the past dozen years has been surveyed and specific examples are presented in detail. EXPERT OPINION: Magnetic particles are important components of emerging protein detection systems. They need to be integrated into simple inexpensive systems for accurate, sensitive detection of fully validated panels of biomarker proteins to be widely useful in clinical cancer diagnostics.

Quantification of protein interactions and solution transport using high-density GMR sensor arrays

Monitoring the kinetics of protein interactions on a high-density sensor array is vital to drug development and proteomic analysis. Label-free kinetic assays based on surface plasmon resonance are the current gold standard, but they have poor detection limits, suffer from non-specific binding, and are not amenable to high-throughput analyses. Here, we show that magnetically responsive nanosensors that have been scaled to over 100,000 sensors per cm² can be used to measure the binding kinetics of various proteins with high spatial and temporal resolution. We present an analytical model that describes the binding of magnetically labelled antibodies to proteins that are immobilized on the sensor surface. This model is able to quantify the kinetics of antibody-antigen binding at sensitivities as low as 20 zeptomoles of solute.

Biosensor Based on Giant Magnetoresistance Material

In recent years, giant magnetoresistance (GMR) sensors have shown a great potential as sensing elements for biomolecule detection. The resistance of a GMR sensor changes with the magnetic field applied to the sensor, so that a magnetically labeled biomolecule can induce a signal. Compared with the traditional optical detection that is widely used in biomedicine, GMR sensors are more sensitive, portable, and give a fully electronic readout. In addition, GMR sensors are inexpensive and the fabrication is compatible with the current VLSI (Very Large Scale Integration) technology. In this regard, GMR sensors can be easily integrated with electronics and microfluidics to detect many different analytes on a single chip. In this article, the authors demonstrate a comprehensive review on a novel approach in biosensors based on GMR material.

Protein-functionalized synthetic antiferromagnetic nanoparticles for biomolecule detection and magnetic manipulation

Direct protein functionalization provides synthetic antiferromagnetic nanoparticles with high chemical specificity and multifunctionality. These nanoparticle-protein conjugates function as improved magnetic labels for biological detection experiments, and exhibit tunable responses to a small external magnetic field gradient, thus allowing the observation of distinctive single nanoparticle motion.

Protein-functionalized synthetic antiferromagnetic nanoparticles for biomolecule detection and magnetic manipulation

Direct protein functionalization provides synthetic antiferromagnetic nanoparticles with high chemical specificity and multifunctionality. These nanoparticle-protein conjugates function as improved magnetic labels for biological detection experiments, and exhibit tunable responses to a small external magnetic field gradient, thus allowing the observation of distinctive single nanoparticle motion.

Stochastic sensing of biomolecules in a nanopore sensor array

In this study, we demonstrate that a pattern-recognition stochastic sensor can be constructed by employing an array of protein pores modified with a variety of non-covalent bonding sites as effective sensing elements. The collective responses of each of the individual component nanopores to a compound produce diagnostic patterns characterized by event dwell time, amplitude, and voltage dependence, which can independently or collectively serve as (an) analyte signature(s). With an increase in the dimensionality of the signal, the nanopore sensor array provides enhanced resolution for the differentiation of analytes compared to a single-pore configuration. This allows identification of a target analyte from a mixture or the potential for simultaneous detection. The pattern-recognition nanopore method is envisaged for further development as a miniaturized and automated sensing technique, which could find potential use as a laboratory or clinical tool for routine sensor applications, including environmental monitoring, drug discovery, medical diagnosis, and homeland security.

Multiplex protein assays based on real-time magnetic nanotag sensing

Magnetic nanotags (MNTs) are a promising alternative to fluorescent labels in biomolecular detection assays, because minute quantities of MNTs can be detected with inexpensive giant magnetoresistive (GMR) sensors, such as spin valve (SV) sensors. However, translating this promise into easy to use and multilplexed protein assays, which are highly sought after in molecular diagnostics such as cancer diagnosis and treatment monitoring, has been challenging. Here, we demonstrate multiplex protein detection of potential cancer markers at subpicomolar concentration levels and with a dynamic range of more than four decades. With the addition of nanotag amplification, the analytic sensitivity extends into the low fM concentration range. The multianalyte ability, sensitivity, scalability, and ease of use of the MNT-based protein assay technology make it a strong contender for versatile and portable molecular diagnostics in both research and clinical settings.