A method for C-terminal sequence analysis in the proteomic era (proteins cleaved with cyanogen bromide)

Extending the Coverage of Lys-C/Trypsin-Based Bottom-up Proteomics by Cysteine S-Aminoethylation

To improve the coverage in bottom-up proteomics, S-aminoethylation of cysteine residues (AE-Cys) was carried out with 2-bromoethylamine, followed by cleavage with lysyl endopeptidase (Lys-C) or Lys-C/trypsin. A model study with bovine serum albumin showed that the C-terminal side of AE-Cys was successfully cleaved by Lys-C. The frequency of side reactions at amino acids other than Cys was less than that in the case of carbamidomethylation of Cys with iodoacetamide. Proteomic analysis of A549 cell extracts in the data-dependent acquisition mode after AE-Cys modification afforded a greater number of identified protein groups, especially membrane proteins. In addition, label-free quantification of proteins in mouse nonsmall cell lung cancer (NSCLC) tissue in the data-independent acquisition mode after AE-Cys modification showed improved NSCLC pathway coverage and greater reproducibility. Furthermore, the AE-Cys method could identify an epidermal growth factor receptor peptide containing the T790 M mutation site, a well-established lung-cancer-related mutation site that has evaded conventional bottom-up methods. Finally, AE-Cys was found to fully mimic Lys in terms of collision-induced dissociation fragmentation, ion mobility separation, and cleavage by Lys-C/trypsin, except for sulfoxide formation during sample preparation.

Divide-and-Conquer Matrisome Protein (DC-MaP) Strategy: An MS-Friendly Approach to Proteomic Matrisome Characterization

Currently, the extracellular matrix (ECM) is considered a pivotal complex meshwork of macromolecules playing a plethora of biomolecular functions in health and disease beyond its commonly known mechanical role. Only by unraveling its composition can we leverage related tissue engineering and pharmacological efforts. Nevertheless, its unbiased proteomic identification still encounters some limitations mainly due to partial ECM enrichment by precipitation, sequential fractionation using unfriendly-mass spectrometry (MS) detergents, and resuspension with harsh reagents that need to be entirely removed prior to analysis. These methods can be technically challenging and labor-intensive, which affects the reproducibility of ECM identification and induces protein loss. Here, we present a simple new method applicable to tissue fragments of 10 mg and more. The technique has been validated on human ovarian tissue and involves a standardized procedure for sample processing with an MS-compatible detergent and combined centrifugation. This two-step protocol eliminates the need for laborious sample clarification and divides our samples into 2 fractions, soluble and insoluble, successively enriched with matrisome-associated (ECM-interacting) and core matrisome (structural ECM) proteins.

Carboxyterminal protein processing in health and disease: key actors and emerging technologies

Carboxypeptidases are important mediators of cellular behavior. Through C-terminal truncations, they alter protein functionality and participate in proteome turnover. Similarly, carboxypeptidases shape the human peptidome by targeting neuroendocrine and vasoactive peptides, thereby regulating signaling pathways in the nervous and cardiovascular systems as well as in embryonic development. Carboxypeptidases are widely connected to various pathological processes such as carcinogenesis and neurodegenerative and cardiovascular diseases. The repertoire of carboxypeptidase in vivo substrates still remains poorly defined, largely due to the lack of suitable experimental approaches. Understanding the precise role of carboxypeptidases is pivotal in the future development of diagnostic/prognostic markers in such diseases. To date, very little attention has been paid to the implication of carboxypeptidases in shaping the proteome as well as the peptidome. This review focuses on the patho-physiological function of carboxypeptidases and highlights the approaches by which proteomics-based technologies can be applied to characterize carboxypeptidases and to quantify the differential regulation of proteins by carboxypeptidases in a proteome-wide manner.

Urinary exosomes and proteomics

A number of highly abundant proteins in urine have been identified through proteomics approaches, and some have been considered as disease-biomarker candidates. These molecules might be clinically useful in diagnosis of various diseases. However, none has proven to be specifically indicative of perturbations of cellular processes in cells associated with urogenital diseases. Exosomes could be released into urine which flows through the kidney, ureter, bladder and urethra, with a process of filtration and reabsorption. Urinary exosomes have been recently suggested as alternative materials that offer new opportunities to identify useful biomarkers, because these exosomes secreted from epithelial cells lining the urinary track might reflect the cellular processes associated with the pathogenesis of diseases in their donor cells. Proteomic analysis of such urinary exosomes assists the search of urinary biomarkers reflecting pathogenesis of various diseases and also helps understanding the function of urinary exosomes in urinary systems. Thus, it has been recently suggested that urinary exosomes are one of the most valuable targets for biomarker development and to understand pathophysiology of relevant diseases.

A combination method of chemical with enzyme reactions for identification of membrane proteins

A simple method for effective analysis of various proteins has been developed, including membrane proteins, with LC-MS/MS, using CNBr and acetic acid cleavage in one reaction for the digestion of both the M/ and /D/ positions within the target proteins. This dual chemical reaction has been compared with traditional CNBr or an acid cleavage method using a rat kidney membrane fraction and it showed an advantage of the dual reaction with respect to a high number of peptides detected and a high protein recovery. Furthermore, when this dual chemical reaction was combined with trypsin digestion, the number of proteins surprisingly increased approximately 3.0 times more than in the cases with the trypsin digestion only. It was also 1.9 times more than in cases dealing with Tube-Gel trypsin digestion, which is one of the most efficient digestion methods. In addition, it was shown that this dual chemical reaction could be applied to an in-gel digestion. Using the combination of the chemical and enzyme reaction, 172 proteins including 95 membrane proteins were identified. This indicated that this method is one of the efficient systems in single MS/MS analysis. In particular, many membrane proteins identified in this study were detected by a new combination, but not by a traditional trypsin digestion method.

Proteomic techniques and activity-based probes for the system-wide study of proteolysis

Proteolysis constitutes a major post-translational modification but specificity and substrate selectivity of numerous proteases have remained elusive. In this review, we highlight how advanced techniques in the areas of proteomics and activity-based probes can be used to investigate i) protease active site specificity; ii) protease in vivo substrates; iii) protease contribution to proteome homeostasis and composition; and iv) detection and localization of active proteases. Peptide libraries together with genetical or biochemical selection have traditionally been used for active site profiling of proteases. These are now complemented by proteome-derived peptide libraries that simultaneously determine prime and non-prime specificity and characterize subsite cooperativity. Cell-contextual discovery of protease substrates is rendered possible by techniques that isolate and quantitate protein termini. Here, a novel approach termed Terminal Amine Isotopic Labeling of Substrates (TAILS) provides an integrated platform for substrate discovery and appropriate statistical evaluation of terminal peptide identification and quantification. Proteolytically generated carboxy-termini can now also be analyzed on a proteome-wide level. Proteolytic regulation of proteome composition is monitored by quantitative proteomic approaches employing stable isotope coding or label free quantification. Activity-based probes specifically recognize active proteases. In proteomic screens, they can be used to detect and quantitate proteolytic activity while their application in cellular histology allows to locate proteolytic activity in situ. Activity-based probes - especially in conjunction with positron emission tomography - are also promising tools to monitor proteolytic activities on an organism-wide basis with a focus on in vivo tumor imaging. Together, this array of methodological possibilities enables unveiling physiological protease substrate repertoires and defining protease function in the cellular- and organism-wide context.

C-terminal sequence analysis of 2DE-separated proteins

The overall study of post-translational modifications (PTMs) of proteins is gaining strong interest. Beside phosphorylation and glycosylation, truncations of the nascent polypeptide chain at the N- or C-terminus are by far the most common types of PTMs. Nevertheless, little attention has been paid to the development of approaches that allow a systematic analysis of these proteolytic processing events. Here we present a protocol that allows the identification of the C-terminal sequence of proteins separated by two-dimensional polyacrylamide gel electrophoresis (2DE). For each purified protein, a peptide mixture is generated by cleavage of the protein with cyanogen bromide. During incubation with carboxypeptidases only the original C-terminal fragment forms a ladder. Ladder readout is performed using MALDI mass spectrometry. 2DE-separated proteins from Shewanella oneidensis were chosen as a model system to investigate the effectiveness of the approach.

Proteome analysis of non-model plants: a challenging but powerful approach

Biological research has focused in the past on model organisms and most of the functional genomics studies in the field of plant sciences are still performed on model species or species that are characterized to a great extent. However, numerous non-model plants are essential as food, feed, or energy resource. Some features and processes are unique to these plant species or families and cannot be approached via a model plant. The power of all proteomic and transcriptomic methods, that is, high-throughput identification of candidate gene products, tends to be lost in non-model species due to the lack of genomic information or due to the sequence divergence to a related model organism. Nevertheless, a proteomics approach has a great potential to study non-model species. This work reviews non-model plants from a proteomic angle and provides an outline of the problems encountered when initiating the proteome analysis of a non-model organism. The review tackles problems associated with (i) sample preparation, (ii) the analysis and interpretation of a complex data set, (iii) the protein identification via MS, and (iv) data management and integration. We will illustrate the power of 2DE for non-model plants in combination with multivariate data analysis and MS/MS identification and will evaluate possible alternatives.

Variability of polymorphic families of three types of xylanase inhibitors in the wheat grain proteome

Cereals contain proteinaceous inhibitors of endo-beta-1,4-xylanases (E.C.3.2.1.8, xylanases). Since these xylanase inhibitors (XIs) are only active against xylanases of microbial origin and do not interact with plant endogenous xylanases, they are believed to act as a defensive barrier against phytopathogenic attack. So far, three types of XIs have been identified, i.e. Triticum aestivum XI (TAXI), xylanase inhibiting protein (XIP), and thaumatin-like XI (TLXI) proteins. In this study the variation in XI forms present in wheat grain was elucidated using high-resolution 2-DE in combination with LC-ESI-MS/MS and biochemical techniques. Reproducible 2-DE fingerprints of TAXI-, XIP-, and TLXI-type XIs, selectively purified from whole meal of three European wheat cultivars using cation exchange chromatography followed by affinity chromatography, were obtained using a pH-gradient of 6 to 11 and a molecular mass range of 10 to 60 kDa. Large polymorphic XI families, not known to date, which exhibit different pI- and/or molecular mass values, were visualised by colloidal CBB staining. Identification of distinct genetic variants by MS/MS-analysis provides a partial explanation for the observed XI heterogeneity. Besides genetic diversity, PTMs, such as glycosylation, account for the additional complexity of the 2-DE patterns.

Terminal proteomics: N- and C-terminal analyses for high-fidelity identification of proteins using MS

In proteomics, MS plays an essential role in identifying and quantifying proteins. To characterize mature target proteins from living cells, candidate proteins are often analyzed with PMF and MS/MS ion search methods in combination with computational search routines based on bioinformatics. In contrast to shotgun proteomics, which is widely used to identify proteins, proteomics based on the analysis of N- and C-terminal amino acid sequences (terminal proteomics) should render higher fidelity results because of the high information content of terminal sequence and potentially high throughput of the method not requiring very high sequence coverage to be achieved by extensive sequencing. In line with this expectation, we review recent advances in methods for N- and C-terminal amino acid sequencing of proteins. This review focuses mainly on the methods of N- and C-terminal analyses based on MALDI-TOF MS for its easy accessibility, with several complementary approaches using LC/MS/MS. We also describe problems associated with MS and possible remedies, including chemical and enzymatic procedures to enhance the fidelity of these methods.