Construction of a densely poly(ethylene glycol)-chain-tethered surface and its performance

Surface Passivation of Norland Optical Adhesive Improves the Guiding Efficiency of Gliding Microtubules in Microfluidic Devices

The microtubule-kinesin biomolecular motor system, which is vital for cellular function, holds significant promise for nanotechnological applications. In vitro gliding assays have demonstrated the ability to transport microcargo by propelling microtubules across kinesin-coated surfaces. However, the uncontrolled directional motion of microtubules has posed significant challenges, limiting the system's application for precise cargo delivery. Microfluidic devices provide a means to direct microtubule movement through their geometric features. Norland Optical Adhesive (NOA) is valued for its mold-free application in microfluidic device fabrication; however, microtubules often climb up channel walls, limiting controlled movement. In this study, a surface passivation method for NOA is introduced, using polyethylene glycol via a thiol-ene click reaction. This technique significantly improved the directional control and concentration of microtubules within NOA microchannels. This approach presents new possibilities for the precise application of biomolecular motors in nanotechnology, enabling advancements in the design of microfluidic systems for complex biomolecular manipulations.

Surface passivation and functionalisation for mass photometry

Interferometric scattering (iSCAT) microscopy enables the label-free observation of biomolecules. Consequently, single-particle imaging and tracking with the iSCAT-based method known as mass photometry (MP) is a growing area of study. However, establishing reliable cover glass passivation and functionalisation methods is crucial to reduce nonspecific binding and prepare surfaces for in vitro single-molecule binding experiments. Existing protocols for fluorescence microscopy can contain strongly scattering or mobile components, which make them impractical for MP-based microscopy. In this study, we characterise several different surface coatings using MP. We present approaches for cover glass passivation using 3-aminopropyltriethoxysilane (APTES) and polyethylene glycol (PEG, 2k) along with functionalisation via a maleimide-thiol linker. These coatings are compatible with water or salt buffers, and show low background scattering; thus, we are able to measure proteins as small as 60 kDa. In this technical note, we offer a surface preparation suitable for in vitro experiments with MP.

ToF-SIMS evaluation of PEG-related mass peaks and applications in PEG detection in cosmetic products

Polyethylene glycols (PEGs) are used in industrial, medical, health care, and personal care applications. The cycling and disposal of synthetic polymers like PEGs pose significant environmental concerns. Detecting and monitoring PEGs in the real world calls for immediate attention. This study unveils the efficacy of time-of-flight secondary ion mass spectrometry (ToF-SIMS) as a reliable approach for precise analysis and identification of reference PEGs and PEGs used in cosmetic products. By comparing SIMS spectra, we show remarkable sensitivity in pinpointing distinctive ion peaks inherent to various PEG compounds. Moreover, the employment of principal component analysis effectively discriminates compositions among different samples. Notably, the application of SIMS two-dimensional image analysis visually portrays the spatial distribution of various PEGs as reference materials. The same is observed in authentic cosmetic products. The application of ToF-SIMS underscores its potential in distinguishing PEGs within intricate environmental context. ToF-SIMS provides an effective solution to studying emerging environmental challenges, offering straightforward sample preparation and superior detection of synthetic organics in mass spectral analysis. These features show that SIMS can serve as a promising alternative for evaluation and assessment of PEGs in terms of the source, emission, and transport of anthropogenic organics.

Nanoquantification of RUNX2 by a 1,1'-carbonyldiimidazole-diamond mediated sandwich assay for osteogenic differentiation

Adipose tissue-derived stem cells (ADSCs) possess the capability to modulate the immune response and alleviate inflammation, rendering them a promising therapeutic option for various conditions, including autoimmune diseases, cardiovascular diseases, and tissue injuries. The osteogenic differentiation in ADSCs plays a pivotal role in fracture healing, bone growth, and the overall bone turnover process, governed by intricate interactions. Runt-related Transcription Factor 2 (RUNX2) is a key player in mineralized tissue generation and is typically found in the early stages of osteogenic differentiation. The objective of this study was to develop a high-affinity sandwich biosensor for the quantification of RUNX2. 1,1'-Carbonyldiimidazole-modified nanodiamond was immobilized on an amine-modified interdigitated electrode surface, followed by the use of a capture antibody to facilitate antigen interaction. A sandwich assay was conducted with the antibody, and the limit of detection for RUNX2 was calculated as 0.1 ng/mL, with a regression value (R2) of 0.9914 over a linear range of 1-2000 ng/mL. Furthermore, biofouling experiments with a nonimmune antibody, BSA, and TNF-α did not yield any current responses, indicating the specific detection of RUNX2. Additionally, RUNX2-spiked serum exhibited an increasing current response at all concentrations, confirming the selective detection of RUNX2.

Detailed dynamical features of the slow hydration water in the vicinity of poly(ethylene oxide) chains

Poly(ethylene oxide) (PEO) is a well-known biocompatible polymer and has widely been used for medical applications. Recently, we have investigated the dynamic behavior of hydration water in the vicinity of PEO chains at physiological temperature and shown the presence of slow water with diffusion coefficient one order of magnitude less than that of bulk water. This could be evidence for the intermediate water that is critical for biocompatibility; however, its detailed dynamical features were not established. In this article, we analyze the quasi-elastic neutron scattering from hydration water through mode distribution analysis and present a microscopic picture of hydration water as well as its relation to cold crystallization.

Influence of Selected Factors on the Adsorption Layer Structure of Polyamino Acids and Their Block Copolymers at the Solid-Aqueous Solution Interface

The adsorption mechanism of different polymers containing ionic polyamino acids monomers in the chain structure at the solid-liquid interface was investigated. Initially, the influence of molecular weight and solution pH on simple polyamino acids (poly(L-aspartic acid) and poly(L-lysine) binding was determined. Considering the obtained dependencies, the polymer adsorption layer conformation was proposed in the systems containing block copolymers (both diblock and symmetrical triblock) consisting of polypeptide as well as poly(ethylene glycol) fragments. The presented studies focused on the application of two experimental methods. The polymer adsorption was carried out using the batch method and the adsorbate concentration was determined spectrophotometrically. Then, the turbidimetric measurements were taken. The analysis of the obtained results showed that the adsorption process of block copolymers depends on two factors. Firstly, the solution pH determines both the nature of the interactions of the copolymer structural units with the solid surface and the conformation of the polypeptide chains. The second parameter influencing the adsorption layer structure is the ratio of the lengths of both blocks. Introducing a short PEG fragment into the polymer main chain may improve the polymer adsorption properties by increasing the number of interactions with the adsorbent surface.

Exploiting epoxy-rich poly(ethylene glycol) films for highly selective ssDNA sensing via electrochemical impedance spectroscopy

This study introduces an alternative approach to immobilize thiolated single-stranded DNA (ssDNA) for the DNA sensing. In contrast to the standard, monomolecular assembly of such moieties on gold substrate, over the thiolate-gold anchors, we propose to use bioinert, porous polyethylene glycol (PEG) films as a 3D template for ssDNA immobilization. The latter process relies on the reaction between the thiol group of the respectively decorated ssDNA and the epoxy groups in the epoxy-rich PEG matrix. The immobilization process and subsequent hybridization ability of the resulting sensing assembly were monitored using cyclic voltammetry and electrochemical impedance spectroscopy, with the latter tool proving itself as the most suitable transduction technique. Electrochemical data confirmed the successful immobilization of thiol-decorated ssDNA probes into the PEG matrix over the thiol-epoxy linkage as well as high hybridization efficiency, selectivity, and sensitivity of the resulting DNA sensor. Whereas this sensor was equivalent to the direct ssDNA assembly in terms of the efficiency, it exhibited a better selectivity and bioinert properties in view of the bioinert character of the PEG matrix. The above findings place PEG films as a promising platform for highly selective ssDNA sensing, leveraging their flexible chemistry, 3D character, and bioinert properties.

Spinal cord injury immunosensor: Sensitive detection of S100β on interdigitated electrode sensor

A spinal cord injury is damage to the nerves and cells that receive and provide a signal from the brain to the rest of the body. Spinal injury causes changes in movement, sensation, and strength, affect the body functions near the injury site, and may lead to paralysis. S100β was found as a suitable biomarker for identifying spinal cord injury and its causing problem. Herein, S100β immunoassay was developed on interdigitated electrode sensor to diagnose spinal cord injury. For effective anti-S100β antibody immobilization, the antibody was premixed with 3-Aminopropyl)triethoxsilane and then attached to the hydroxylated interdigitated electrode surface. This method of antibody immobilization enhanced the antibody attachment two-times than the method without premix. Antibody-attached surfaces increased current responses as S100 concentrations increased, and the limit of detection was seen to be 1 pg/mL on the linearity until 3000 pg/mL at an R2 value of 0.9907 [y = 7x - 6.4667]. Further, biofouling experiments with glial fibrillary acidic protein and γ-aminobutyric acid failed to enhance the current response, indicating the specific detection of S100β. This immunoassay identifies S100β at its lower level and helps to diagnose spinal cord injury and its related problem.

Synthesis and Characterization of Polyethylene Glycol-Grafted Photoreactive Polyethylene Glycols for Antibiofouling Applications

Notably, antibiofouling is an important and predominant technique adopted to improve the surfaces of biomaterials. In this study, polyethylene glycol-grafted polyethylene glycols bearing azidophenyl groups were synthesized and immobilized on polystyrene surfaces via photoirradiation. The prepared polymers were found to be highly soluble in water, and photoimmobilization with fluorescent proteins was confirmed based on micropatterning using a photomask. These polymers suppressed nonspecific interactions between proteins and cells on the substrate. Considering that photoimmobilization can be adopted for the covalent bond modification of various surfaces, the developed water-soluble and highly antibiofouling polymers appear to be useful in biomaterial preparation.

Conducting Polymer-Infused Electrospun Fibre Mat Modified by POEGMA Brushes as Antifouling Biointerface

Biofouling on surfaces, caused by the assimilation of proteins, peptides, lipids and microorganisms, leads to contamination, deterioration and failure of biomedical devices and causes implants rejection. To address these issues, various antifouling strategies have been extensively studied, including polyethylene glycol-based polymer brushes. Conducting polymers-based biointerfaces have emerged as advanced surfaces for interfacing biological tissues and organs with electronics. Antifouling of such biointerfaces is a challenge. In this study, we fabricated electrospun fibre mats from sulphonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (sSEBS), infused with conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) (sSEBS-PEDOT), to produce a conductive (2.06 ± 0.1 S/cm), highly porous, fibre mat that can be used as a biointerface in bioelectronic applications. To afford antifouling, here the poly(oligo (ethylene glycol) methyl ether methacrylate) (POEGMA) brushes were grafted onto the sSEBS-PEDOT conducting fibre mats via surface-initiated atom transfer radical polymerization technique (SI-ATRP). For that, a copolymer of EDOT and an EDOT derivative with SI-ATRP initiating sites, 3,4-ethylenedioxythiophene) methyl 2-bromopropanoate (EDOTBr), was firstly electropolymerized on the sSEBS-PEDOT fibre mat to provide sSEBS-PEDOT/P(EDOT-co-EDOTBr). The POEGMA brushes were grafted from the sSEBS-PEDOT/P(EDOT-co-EDOTBr) and the polymerization kinetics confirmed the successful growth of the brushes. Fibre mats with 10-mers and 30-mers POEGMA brushes were studied for antifouling using a BCA protein assay. The mats with 30-mers grafted brushes exhibited excellent antifouling efficiency, ~82% of proteins repelled, compared to the pristine sSEBS-PEDOT fibre mat. The grafted fibre mats exhibited cell viability >80%, comparable to the standard cell culture plate controls. Such conducting, porous biointerfaces with POEGMA grafted brushes are suitable for applications in various biomedical devices, including biosensors, liquid biopsy, wound healing substrates and drug delivery systems.

Gold nanourchin enhances detection of Alzheimer's disease biomarker "miRNA-137" on dual electrode sensing surface

Diagnosis of Alzheimer's disease (AD) is a complex task, and at present, neuroimaging such as magnetic resonance imaging and positron emission tomography is commonly used for the diagnosis of AD. This research work developed a new biosensing method with gold nanomaterial to identify AD biomarker of miRNA-137. Gold nanourchin (GNU) was attached on the interdigitated electrode through the silane linker and COOH-ended capture oligonucleotide was immobilized on the GNU surface. This surface helps to quantify the target sequence of miRNA-137 and the detection limit reached to 0.01 pM on the linear range of 0.01-100 pM. With 3δ calculation on the linearity, the determination coefficient was noticed as y = 1.2867x - 2.2697; R²  = 0.9059. The control performances did not show a significant response, indicating the specific identification of target.

Rational Design of Porous Poly(ethylene glycol) Films as a Matrix for ssDNA Immobilization and Hybridization

Poly(ethylene glycol) (PEG) films, fabricated by thermally induced crosslinking of amine- and epoxy-terminated four-arm STAR-PEG precursors, were used as porous and bioinert matrix for single-stranded DNA (ssDNA) immobilization and hybridization. The immobilization relied on the reaction between the amine groups in the films and N-hydroxy succinimide (NHS) ester groups of the NHS-ester-decorated ssDNA. Whereas the amount of reactive amine groups in the films with the standard 1:1 composition of the precursors turned out to be too low for efficient immobilization, it could be increased noticeably using an excess (2:1) concentration of the amine-terminated precursor. The respective films retained the bioinertness of the 1:1 prototype and could be successfully decorated with probe ssDNA, resulting in porous, 3D PEG-ssDNA sensing assemblies. These assemblies exhibited high selectivity with respect to the target ssDNA strands, with a hybridization efficiency of 78–89% for the matching sequences and full inertness for non-complementary strands. The respective strategy can be applied to the fabrication of DNA microarrays and DNA sensors. As a suitable transduction technique, requiring no ssDNA labeling and showing high sensitivity in the PEG-ssDNA case, electrochemical impedance spectroscopy is suggested.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Confinements of Thermoresponsive Dendronized Polymers to Proteins

Crowding environment created by host polymers plays crucial roles in manipulating interactions with proteins and modulating their bioactivity. Here, we report our investigation on interactions between polymers and proteins in...

Protein Removal from Hydrogels through Repetitive Surface Degradation

Suppression of protein adsorption is a necessary property for materials used in the living body. In this study, thermoresponsive and degradable hydrogels were prepared by the radical polymerization of 2-methylene-1,3-dioxepane, 2-hydroxyethyl acrylate (HEA), and poly(ethylene glycol) monomethacrylate (PEGMA). The prepared hydrogels re-exposed PEG-grafted chains to the interface through surface degradation, which was confirmed by the maintenance of the chemical composition of the hydrogel surfaces after hydrolysis. Notably, adsorbed proteins can be removed from the hydrogel surfaces through hydrogel surface degradation at least thrice.

Nanowired dual-electrodes surface to monitor cerebral ischemia by current-volt measurements

The level of clotting protein 'factor IX' (FIX) is highly associated with cerebral ischemia, and this research work has developed a sensitive detection of FIX on dielectrode sensor by current-volt measurement. Sensing area was grown with zinc oxide nanowire to attach more probe for FIX interaction. Aptamer was utilized as the detection probe and attached on the sensing electrode surface through amine-aldehyde chemical linkage. In addition, biotin-streptavidin interaction was utilized to attach the higher number aptamers on the electrode surface connected with dual-probe station. FIX detection limit was found as 10 fM in the phosphate buffer saline spiked samples and 1:320 dilution of human serum. The linear ranges were as 10 fM to 100 pM and 1:320 to 1:80, respectively. With a good determination co-efficient [y = 2.6813x - 3.8467; R 2 = 0.9479] this biosensing strategy helps to quantify FIX and monitor the condition of cerebral ischemia.

Silica nanoparticle-modified microcomb electrode for voltammetry detection of osteopontin with high sensitivity

Osteosarcoma is a commonly occurring bone malignancy, and it is the second most common cause of cancer deaths in adolescents and children. A sensitive silica nanoparticle (Si-NP) modified current-volt sensor was introduced to identify the osteopontin antigen, a well-known biomarker for osteosarcoma. Si-NP was extracted from the rice husk ash and utilized for the surface functionalization on the interdigitated microelectrode sensing surface. Extracted Si-NP has a spherical shape with uniform distribution, and it is confirmed by field emission scanning electron microscopy and field-emission transmission electron microscopy. Si-NP was layered on the electrode surface through a (3-aminopropyl)triethoxysilane amine linker, and the antibody was immobilized on Si-NP through a glutaraldehyde linker. Osteopontin was effectively detected on the antibody-attached surface, and the determination limit was 0.6 ng/mL. The regression was determined as y = 0.9366x - 1.1113 and the R2 value was 0.9331 and the detection limit of osteopontin was 0.6 ng/mL in the range between 0.3 and 5 ng/mL. In addition, control performance with nonimmune antibodies and albumin did not change the current volt, showing the specific osteopontin identification. This research work brings out the easy and cost-effective method to diagnose osteosarcoma and its etiology.

Different hydration states and passive tumor targeting ability of polyethylene glycol-modified dendrimers with high and low PEG density

It has been reported that the amount of intermediate water, defined as water molecules loosely bound to a material, is a useful index of the material's bio-inert properties. Polyethylene glycol (PEG) is a well-known biocompatible polymer with a large amount of intermediate water. Many researchers have showed that PEGylated nanoparticles are passively accumulated in tumor tissues owing to their enhanced permeability and retention (EPR) effects. Dendrimers are regularly branched polymers with highly controllable size and structure, which can be exploited as potent drug carriers. In this study, we investigated the tripartite relationship among the PEG density, the hydration state, and the passive tumor targeting property, using PEGylated dendrimers. The fully PEGylated dendrimer, PEG64-den, showed similar hydration behavior to PEG and a passive tumor targeting property. In contrast, the hydration state of the partly PEGylated dendrimer, PEG5-den, was different from that of PEG64-den, and the passive tumor targeting property was not observed. This is the first report to show the hydration state of a drug carrier as well as discuss a relationship between the hydration state and biodistribution.

Protein-imprinted polymer films prepared via cavity-selective multi-step post-imprinting modifications for highly selective protein recognition

The use of molecularly imprinted polymers (MIPs) for achieving synthetic receptors capable of selective molecular recognition is promising; however, these polymers exhibit low selectivity derived from the heterogeneity of their created, imprinted cavities. To achieve highly selective protein recognition, we herein report the cavity-selective, multi-step, post-imprinting modification of MIPs. An MIP film for lysozyme was prepared by the copolymerization of {[2-(2-methacrylamido)ethyldithio]ethylcarbamoyl}methoxy acetic acid, a functional monomer possessing a modifiable disulfide bond, with acrylamide and N,N'-methylenebisacrylamide in the presence of lysozyme. After the removal of lysozyme, the disulfide bonds were cleaved by treatment with a reductant. A low concentration of lysozyme was then added to occupy the high-affinity cavities of the polymer and sterically protect the thiol groups within them. A poly(ethylene glycol)-based capping agent was reacted with the thiol groups residing in low-affinity cavities to hinder them. After the regeneration of the high-affinity cavities by washing out the bound lysozyme, the remaining thiol groups were reacted with 3-(2-pyridyldithio)propionic acid to introduce interacting groups, which produced capped MIPs. Comparing the capped and uncapped MIPs revealed that off-target protein binding was effectively suppressed by the capping treatment without any reduction in binding affinity (1.1 × 10⁹ M^-1). Further investigation revealed that the lysozyme concentration during the capping process is critical for the selectivity of the capped MIP. In this case, highly selective MIPs were achieved when the lowest lysozyme concentration (100 nM) was used. This facile process for creating highly selective, synthetic polymer receptors is a powerful approach for achieving plastic antibodies.

An iron oxide nanoworm hybrid on an interdigitated microelectrode silica surface to detect abdominal aortic aneurysms

An abdominal aortic aneurysm (AAA) is abnormal swelling in the abdominal aorta and a prevalent life-threatening disease. This research introduces a new interdigitated microelectrode (IDME)-sensing surface modified by iron oxide nanoworms (IONWs) for detecting the AAA biomarker insulin-like growth factor-1 (IGF1). A sandwich pattern was formulated with the IGF1 aptamer and IGFBP1 (IGF binding protein-1) on the IONW-constructed IDME hybrid to identify IGF1. The surface morphology of the IONWs revealed a uniform distribution of worm-like structures (80-100 nm) as confirmed by FESEM and FETEM analyses. Further, the presence of the major elements, Fe and O, was confirmed by EDX and XPS studies. The crystal planes that appeared in the IONW reflect cubic magnetite. IONW-modified IDME attained a limit of detection for IGF1 of 1 fM (3σ) with an aptamer-IGF1-IGFBP1 sandwich. This sandwich with IGFBP1 enhanced the current level at all concentrations of IGF1 and displayed linearity in the range 1 fM to 100 pM with a determination coefficient of R² = 0.9373 [y = 3.38221x - 4.79]. Control experiments with complementary aptamer sequences, IGF2 and IGFBP3 did not show notable signal changes, indicating the specific detection of IGF1. This IONW constructed electrode helps to achieve the detection of low amounts of IGF1 and diagnose AAA at the stage prior to rupture.

Longitudinal Zeolite-Iron Oxide Nanocomposite Deposited Capacitance Biosensor for Interleukin-3 in Sepsis Detection

Sepsis is an extreme condition involving a physical response to severe microbial infection and causes fatal and life-threatening issues. Sepsis generates during the chemicals release with the immune system into the bloodstream for fighting against an infection, which causes the inflammation and leads to the medical emergency. A complexed longitudinal zeolite and iron oxide nanocomposite was extracted from coal mine fly ash and utilized to improve the surface characteristics of the capacitance biosensor to identify sepsis attacks. Anti-interleukin-3 (anti-IL-3) antibody was attached to the zeolite- and iron oxide-complexed capacitance electrode surface through an amine linker to interact with the sepsis biomarker IL-3. The morphological and chemical components of the nanocomplex were investigated by FESEM, FETEM, and EDX analyses. At approximately 30 nm, the longitudinal zeolite and iron oxide nanocomposite aided in attaining the limit of IL-3 detection of 3 pg/mL on the linear curve, with a regression coefficient (R2) of 0.9673 [y = 1.638x - 1.1847]. A lower detection limit was achieved in the dose-dependent range (3-100 pg/mL) due to the higher amount of antibody immobilization on the sensing surface due to the nanomaterials and the improved surface current. Furthermore, control experiments with relevant biomolecules did not show capacitance changes, and spiked IL-3 in human serum increased capacitance, indicating the specific and selective detection of IL-3. This study identifies and quantifies IL-3 via potentially useful methods and helps in diagnosing sepsis attack.

Alzheimer's Disease Determination by a Dual Probe on Gold Nanourchins and Nanohorn Hybrids

Background

Alzheimer’s disease (AD) is a neurodegenerative chronic disorder that causes dementia and problems in thinking, cognitive impairment and behavioral changes. Amyloid-beta (Aβ) is a peptide involved in AD progression, and a high level of Aβ is highly correlated with severe AD. Identifying and quantifying Aβ levels helps in the early treatment of AD and reduces the factors associated with AD.

Materials and Methods

This research introduced a dual probe detection system involving aptamers and antibodies to identify Aβ. Aptamers and antibodies were attached to the gold (Au) urchin and hybrid on the carbon nanohorn-modified surface. The nanohorn was immobilized on the sensor surface by using an amine linker, and then a Au urchin dual probe was immobilized.

Results

This dual probe-modified surface enhanced the current flow during Aβ detection compared with the surface with antibody as the probe. This dual probe interacted with higher numbers of Aβ peptides and reached the detection limit at 10 fM with R²=0.992. Furthermore, control experiments with nonimmune antibodies, complementary aptamer sequences and control proteins did not display the current responses, indicating the specific detection of Aβ.

Conclusion

Aβ-spiked artificial cerebrospinal fluid showed a similar response to current changes, confirming the selective identification of Aβ.

Thyroglobulin determination on silane-antibody functionalized interdigitated dielectrode surface to diagnose thyroid tumor

Thyroid cancer appears in endocrine glands and specific to thyroid glands has been reported widely. This work was targeted to identify and quantify thyroglobulin by using antithyroglobulin antibody complexed silane surface on interdigitated electrode (IDE) sensing surface. (3-Aminopropyl)triethoxysilane linker was used to make silane-coupling with antibody and attached on the hydroxylated IDE. This electroanalytical IDE revealed the dose-dependent responses with thyroglobulin concentrations. By getting increments with the thyroglobulin concentrations, the current responses were enhanced concomitantly and the thyroglobulin detection limit was noted as 1 pM on the linear curve [y = 0.1311x + 0.5386; R² = 0.9707] with the sensitivity at lower picomolar range. Moreover, the control experiments with thyroid peroxidase and nonimmune antibody cannot yield any response of current, confirming the specific detection of thyroglobulin. This research set-up is useful to determine and quantify the thyroglobulin and diagnose thyroid cancer.

Myocardial infarction biomarker C-reactive protein detection on nanocomposite aptasensor

Myocardial infarction (MI) is considered as one of the major life-threatening health issues worldwide. Growing number of cases every year is demanding rapid, portable, and early detection by the sensing devices for the identification of MI. This research work introduces a modified interdigitated electrode (IDE) sensing surface constructed with single-walled carbon nanotube (SWCN) to detect the cardiac biomarker, C-reactive protein (CRP). CRP-specific aptamer was conjugated with gold nanoparticle and attached on SWCN-constructed IDE surface. This probe-modified sensing surface has reached the limit of CRP detection to 10 pM on a linear regression curve with the regression coefficient of R² = 0.9223 [y = 0.9198x - 0.4326]. Further, control molecules, such as random aptamer sequence and nontarget cardiac biomarker (Troponin I), did not show the current response, indicating the specific CRP detection. This sensing strategy helps to detect the lower level of CRP and diagnose the MI at its earlier stages.

BIO-INSPIRED MAGNETIC BEADS FOR ISOLATION OF SPERM FROM HETEROGENOUS SAMPLES IN FORENSIC APPLICATIONS

Rapid and efficient processing of sexual assault evidence will accelerate forensic investigation and decrease casework backlogs. The standardized protocols currently used in forensic laboratories require the continued innovation to handle the increasing number and complexity of samples being submitted to forensic labs. Here, we present a new technique leveraging the integration of a bio-inspired oligosaccharide (i.e., Sialyl-Lewis^X) with magnetic beads that provides a rapid, inexpensive, and easy-to-use strategy that can potentially be adapted with current differential extraction practice in forensics labs. This platform (i) selectively captures sperm; (ii) is sensitive within the forensic cut-off; (iii) provides a cost effective solution that can be automated with existing laboratory platforms; and (iv) handles small volumes of sample (∼200 μL). This strategy can rapidly isolate sperm within 25 minutes of total processing that will prepare the extracted sample for downstream forensic analysis and ultimately help accelerate forensic investigation and reduce casework backlogs.

Detection of microRNA-335-5p on an Interdigitated Electrode Surface for Determination of the Severity of Abdominal Aortic Aneurysms

Abdominal aortic aneurysm (AAA) refers to the enlargement of the lower artery of the abdominal aorta, and identification of an early detection tool is urgently needed for diagnosis. In the current study, an interdigitated electrode (IDE) sensing surface was used to identify miRNA-335-5p, which reflects the formation of AAAs. The uniformity of the silica material was observed by 3D profilometry, and the chemically modified highly conductive surface improved the detection via the I-V mode. The targeted miRNA-335-5p was detected in a dose-dependent manner and based on linear regression and 3σ analyses, the sensitivity was determined to be 1 fM with a biotinylated probe. The high specificity was shown by discriminating the target sequence from noncomplementary and single- and triple-mismatched sequences. These outputs demonstrated the high-performance detection of miRNA-335-5p with good reproducibility for determination of the severity of AAA.

Coordination of Nanoconjugation with an Antigen/Antibody for Efficient Detection of Gynecological Tumors

Cervical, ovarian, and endometrial cancers are common in the female reproductive system. Cervical cancer starts from the cervix, while ovarian cancer develops when abnormal cells grow in the ovary. Endometrial or uterine cancer starts from the lining of the womb in the endometrium. Approximately 12,000 women are affected every year by cervical cancer in the United States. Squamous cell carcinoma antigen (SCC-Ag) is a well-established biomarker in serum for diagnosing gynecological cancers, and its levels were observed to be elevated in cervical, ovarian, and endometrial cancer patients. Moreover, SCC-Ag was used to identify the tumor size and progression stages. Various biosensing systems have been proposed to identify SCC-Ag; herein, enhanced interdigitated electrode sensing is presented with the use of gold nanoparticles (GNPs) to conjugate an antigen/antibody. It was proved that the limit of detection is 62.5 fM in the case of antibody-GNP, which is 2-fold higher than that by SCC-Ag-GNP. Furthermore, the antibody-GNP-modified surface displays greater current increases with concomitant dose-dependent SCC-Ag levels. High analytical performance was shown by the discrimination against α-fetoprotein and CYFRA 21-1 at 1 pM. An enhanced sensing system is established for gynecological tumors, representing an advance from the earlier detection methods.

Temperature-Activated PEG Surface Segregation Controls the Protein Repellency of Polymers

Poly(ethylene glycol) (PEG) is widely used to modulate the hydration states of biomaterials and is often applied to produce nonfouling surfaces. Here, we present X-ray scattering data, which show that it is the surface segregation of PEG, not just its presence in the bulk, that makes this happen by influencing the hydrophilicity of PEG-containing substrates. We demonstrate a temperature-dependent trigger that transforms a PEG-containing substrate from a protein-adsorbing to a protein-repelling state. On films of poly(desaminotyrosyl-tyrosine-co-PEG carbonate) with high (20 wt %) PEG content, in which very little protein adsorption is expected, quartz crystal microbalance data showed significant adsorption of fibrinogen and bovine serum albumin at 8 °C. The surface became protein-repellent at 37.5 °C. When the same polymer was iodinated, the polymer was protein-adsorbent, even when 37 wt % PEG was incorporated into the polymer backbone. This demonstrates that high PEG content by itself is not sufficient to repel proteins. By inhibiting phase separation either with iodine or by lowering the temperature, we show that PEG must phase-separate and bloom to the surface to create an antifouling surface. These results suggest an opportunity to design materials with high PEG content that can be switched from a protein-attractant to a protein-repellent state by inducing phase separation through brief exposure to temperatures above their glass transition temperature.

Smooth and Transparent Films Showing Paradoxical Surface Properties: The Lower the Static Contact Angle, the Better the Water Sliding Performance

Smooth and transparent hydrophilic films showing excellent water sliding properties were prepared by using a sol-gel solution of 2-[methoxy (ethyleneoxy)₁₀ propyl]trimethoxysilane and tetraethoxysilane. The resulting hybrid films were statically hydrophilic (static water contact angles (CAs) were in the range of 30-45°), but water droplets (50 μL) could move smoothly on an inclined surface (minimum sliding angle was 6°) without pinning or tailing because of low CA hysteresis (5 ± 1°). Thanks to this hybrid film formation on aluminum (Al) substrate, drainage performance during condensation and frosting/defrosting markedly improved compared to that on hydrophilic, bare Al, or hydrophobic monolayer-covered Al substrates.

Squamous Cell Carcinoma Biomarker Sensing on a Strontium Oxide-Modified Interdigitated Electrode Surface for the Diagnosis of Cervical Cancer

Cervical cancer is a life-threatening complication, appearing as the uncontrolled growth of abnormal cells in the lining of the cervix. Every year, increasing numbers of cervical cancer cases are reported worldwide. Different identification strategies were proposed to detect cervical cancer at the earlier stages using various biomarkers. Squamous cell carcinoma antigen (SCC-Ag) is one of the potential biomarkers for this diagnosis. Nanomaterial-based detection systems were shown to be efficient with different clinical biomarkers. In this study, we have demonstrated strontium oxide-modified interdigitated electrode (IDE) fabrication by the sol-gel method and characterized by scanning electron microscopy and high-power microscopy. Analysis of the bare devices indicated the reproducibility with the fabrication, and further pH scouting on the device revealed that the reliability of the working pH ranges from 3 to 9. The sensing surface was tested to detect SCC-Ag against its specific antibody; the detection limit was found to be 10 pM, and the sensitivity was in the range between 1 and 10 pM as calculated by 3σ. The specificity experiment was carried out using major proteins from human serum, such as albumin and globulin. SCC-Ag was shown to be selectively detected on the strontium oxide-modified IDE surface.

Nanoparticle heterogeneity: an emerging structural parameter influencing particle fate in biological media?

Drug nanocarriers' surface chemistry is often presumed to be uniform. For instance, the polymer surface coverage and distribution of ligands on nanoparticles are described with averaged values obtained from quantification techniques based on particle populations. However, these averaged values may conceal heterogeneities at different levels, either because of the presence of particle sub-populations or because of surface inhomogeneities, such as patchy surfaces on individual particles. The characterization and quantification of chemical surface heterogeneities are tedious tasks, which are rather limited by the currently available instruments and research protocols. However, heterogeneities may contribute to some non-linear effects observed during the nanoformulation optimization process, cause problems related to nanocarrier production scale-up and correlate with unexpected biological outcomes. On the other hand, heterogeneities, while usually unintended and detrimental to nanocarrier performance, may, in some cases, be sought as adjustable properties that provide NPs with unique functionality. In this review, results and processes related to this issue are compiled, and perspectives and possible analytical developments are discussed.

Site-specific post-imprinting modification of molecularly imprinted polymer nanocavities with a modifiable functional monomer for prostate cancer biomarker recognition

Recognition of glycans of glycoproteins using biotic materials such as antibodies is challenging due to lack of antigenicity. Polymeric materials suitable for the molecular recognition of glycoproteins have attracted considerable attention. In this study, we aimed to develop abiotic molecular materials for the recognition of prostate-specific antigen (PSA), a known biomarker for prostate cancer. We used a non-covalent bonding-based molecular imprinting technique to introduce post-imprinting poly(ethylene glycol)-based capping agent into a low-affinity recognition cavity. Details of the binding properties of these groups were investigated to optimize their affinity and selectivity for PSA. Molecularly imprinted polymers (MIPs) were prepared using a bottom-up approach based on surface-initiated atom transfer radical polymerization from a PSA-conjugated sensor chip with a functional monomer-bearing carboxy and secondary amine groups as interaction and post-imprinting modification (PIM) sites, respectively. PSA was orientationally conjugated on the sensor chip through diesters between the immobilized 3-fluorophenyl boronic acid and the cis-diol groups of PSA glucans. Treatment with the capping agent selectively inactivated low-affinity recognition cavities while protecting high-affinity cavities with the addition of a low concentration of PSA as a dynamic protection agent. The MIP thickness is critical in the present molecular imprinting, as a value of less than 5 nm can enable high selectivity. We believe that the proposed strategy based on a non-covalent molecular imprinting approach combined with a PIM-based capping treatment provides a novel method for the development of highly sensitive and selective glycoprotein recognition materials for use in biomarker sensing.

Modified Pluronic F127 Surface for Bioconjugation and Blocking Nonspecific Adsorption of Microspheres and Biomacromolecules

Many experiments and applications require the chemical coupling of target molecules to surfaces, during which the elimination of nonspecific interactions presents a difficult challenge. We report on a technologically accessible surface passivation and chemical conjugation method based on an NHS end-labeled F127 Pluronic block copolymer (F127-NHS). To quantify interactions between the F127-NHS surface and magnetic microspheres, we developed a simple assay: the microsphere adhesion by gravity, inversion, then counting, or "MAGIC" assay. To improve blocking of microspheres while maintaining the ability to chemically couple additional molecules, we implemented a pH-dependent two-step chemical modification process for amine microspheres. This process achieves an extremely high level of blocking nonspecific interactions (less than 2% nonspecific adhesion) for a variety of microsphere surface charges and chemical functionalities. We also demonstrate the ability to specifically tether magnetic microspheres to an F127-NHS surface, using single DNA molecules. Using the DNA microspheres, we establish the applicability of the surface for force spectroscopy (stable with an applied load >30 pN) via the massively parallel technique of centrifuge force microscopy. Finally, we demonstrate that the surface can be used in fluorescence studies with a fluorogenic peptide cleavage assay, with high levels of blocking achieved for both the fluorogenic peptide and trypsin. These results suggest applications including, but not limited to, single-molecule force spectroscopy and fluorescence, biosensors, medical implants, and anti-biofouling, which could make use of the F127-NHS surface.

Analysis of Interaction Between Interfacial Structure and Fibrinogen at Blood-Compatible Polymer/Water Interface

The correlation between the interfacial structure and protein adsorption at a polymer/water interface was investigated. Poly(2-methoxyethyl acrylate)(PMEA), which is one of the best blood compatible polymers available, was employed. Nanometer-scale structures generated through the phase separation of polymer and water were observed at the PMEA/phosphate buffered saline interface. The interaction between the interfacial structures and fibrinogen (FNG) was measured using atomic force microscopy. Attraction was observed in the polymer-rich domains as well as in the non-blood compatible polymer. In contrast, no attractive interactions were observed, and only a repulsion occurred in the water-rich domains. The non-adsorption of FNG into the water rich domains was also clarified through topographic and phase image analyses. Furthermore, the FNG molecules adsorbed on the surface of PMEA were easily desorbed, even in the polymer-rich domains. Water molecules in the water-rich domains are anticipated to be the dominant factor in preventing FNG adsorption and thrombogenesis on a PMEA interface.

Large-Scale Synthesis and Medical Applications of Uniform-Sized Metal Oxide Nanoparticles

Thanks to recent advances in the synthesis of high-quality inorganic nanoparticles, more and more types of nanoparticles are becoming available for medical applications. Especially, metal oxide nanoparticles have drawn much attention due to their unique physicochemical properties and relatively inexpensive production costs. To further promote the development and clinical translation of these nanoparticle-based agents, however, it is highly desirable to reduce unwanted interbatch variations of the nanoparticles because characterizing and refining each batch are costly, take a lot of effort, and, thus, are not productive. Large-scale synthesis is a straightforward and economic pathway to minimize this issue. Here, the recent achievements in the large-scale synthesis of uniform-sized metal oxide nanoparticles and their biomedical applications are summarized, with a focus on nanoparticles of transition metal oxides and lanthanide oxides, and clarifying the underlying mechanism for the synthesis of uniform-sized nanoparticles. Surface modification steps to endow hydrophobic nanoparticles with water dispersibility and biocompatibility are also briefly described. Finally, various medical applications of metal oxide nanoparticles, such as bioimaging, drug delivery, and therapy, are presented.

Topology Effect of AIEgen-Appended Poly(acrylic acid) with Biocompatible Segments on Ca2+-Sensing and Protein-Adsorption-Resistance Properties

We recently reported that tetraphenylethene-appended poly(acrylic acid) derivatives (e.g., PAA-TPE_0.02) can serve as fluorescent Ca²⁺ sensors in the presence of physiological concentrations of biologically relevant ions, amino acids, and sugars. However, in the presence of basic proteins such as albumins, the Ca²⁺-sensing property of the polymer is significantly impaired due to the nonspecific adsorption of protein molecules, which competes with binding to Ca²⁺. To solve this problem, we explored new designs by focusing on the polymer-chain topology of PAA-TPE_0.02 with biocompatible segments. Here, we report the Ca²⁺-sensing and protein-adsorption-resistance properties of various types of PAA-TPE_0.02 copolymers with a poly(oligoethylene glycol acrylate) (polyOEGA) segment, featuring a random, diblock, triblock, or 4-armed-star-block structure. Through this study, we show an interesting topology effect; i.e., a branch-shaped PAA-TPE_0.02-co-polyOEGA with biocompatible segments at every terminal (i.e., 4-armed-star-block copolymer) exhibits both good Ca²⁺-sensing and protein-adsorption-resistance properties.

Serum Protein-Resistant Behavior of Multisite-Bound Poly(ethylene glycol) Chains on Iron Oxide Surfaces

Recent surveys have shown that the number of nanoparticle-based formulations actually used at a clinical level is significantly lower than that expected a decade ago. One reason for this is that the physicochemical properties of nanoparticles fall short for handling the complexity of biological environments and preventing nonspecific protein adsorption. In this study, we address the issue of the interactions of plasma proteins with polymer-coated surfaces. With this aim, we use a noncovalent grafting-to method to functionalize iron oxide sub-10 nm nanoparticles and iron oxide flat substrates and compare their protein responses. The functionalized copolymers consist of alternating poly(ethylene glycol) (PEG) chains and phosphonic acid grafted on the same backbone. Quartz crystal microbalance with dissipation was used to monitor polymer adsorption kinetics and evaluate the resistance to protein adsorption. On flat substrates, functionalized PEG copolymers adsorb and form a brush in moderate or highly stretched regimes, with densities between 0.15 and 1.5 nm-2. PEG layers using phosphonic acid as linkers exhibit excellent protein resistance. In contrast, layers prepared with carboxylic acid as the grafting agent exhibit mitigated protein responses and layer destructuration. The present study establishes a correlation between the long-term stability of PEG-coated particles in biofluids and the protein resistance of surfaces coated with the same polymers.

Investigating the Effect of Substrate Materials on Wearable Immunoassay Performance

Immunoassays are ubiquitous across research and clinical laboratories, yet little attention is paid to the effect of the substrate material on the assay performance characteristics. Given the emerging interest in wearable immunoassay formats, investigations into substrate materials that provide an optimal mix of mechanical and bioanalytical properties are paramount. In the course of our research in developing wearable immunoassays which can penetrate skin to selectively capture disease antigens from the underlying blood vessels, we recently identified significant differences in immunoassay performance between gold and polycarbonate surfaces, even with a consistent surface modification procedure. We observed significant differences in PEG density, antibody immobilization, and nonspecific adsorption between the two substrates. Despite a higher PEG density formed on gold-coated surfaces than on amine-functionalized polycarbonate, the latter revealed a higher immobilized capture antibody density and lower nonspecific adsorption, leading to improved signal-to-noise ratios and assay sensitivities. The major conclusion from this study is that in designing wearable bioassays or biosensors, the design and its effect on the antifouling polymer layer can significantly affect the assay performance in terms of analytical specificity and sensitivity.