Recent advances in AIE polymers

Pushing Trap-Controlled Persistent Luminescence Materials toward Multi-Responsive Smart Platforms: Recent Advances, Mechanism, and Frontier Applications

Smart stimuli-responsive persistent luminescence materials, combining the various advantages and frontier applications prospects, have gained booming progress in recent years. The trap-controlled property and energy storage capability to respond to external multi-stimulations through diverse luminescence pathways make them attractive in emerging multi-responsive smart platforms. This review aims at the recent advances in trap-controlled luminescence materials for advanced multi-stimuli-responsive smart platforms. The design principles, luminescence mechanisms, and representative stimulations, i.e., thermo-, photo-, mechano-, and X-rays responsiveness, are comprehensively summarized. Various emerging multi-responsive hybrid systems containing trap-controlled luminescence materials are highlighted. Specifically, temperature dependent trapping and de-trapping performance is discussed, from extreme-low temperature to ultra-high temperature conditions. Emerging applications and future perspectives are briefly presented. It is hoped that this review would provide new insights and guidelines for the rational design and performance manipulation of multi-responsive materials for advanced smart platforms.

Tetraphenylethene-modified polysiloxanes: Synthesis, AIE properties and multi-stimuli responsive fluorescence

Herein, polysiloxane-based aggregation-induced emission (AIE) polymers and rubbers were prepared which display interesting multi-stimuli responsive fluorescence. TPE-modified polydimethylsiloxanes (PDMS-TPE) as polysiloxane-based AIE polymers were synthesized through Heck reaction of bromo-substituted tetraphenylethene (TPE-Br) and vinyl polysiloxanes. As expected, TPE moiety endows the modified polysiloxane with typical AIE behavior. However, limited by the long polymer chains, the aggregation process of PDMS-TPE shows obvious differences compared with the small molecule TPE-Br. The fluorescence of PDMS-TPE in THF/H2O starts to increase when the H2O fraction (fw) is 70% while TPE-Br is nearly non-luminous until the fw is up to 99%. The fluorescence intensity ratio (I/I0) of PDMS-TPE in the aggregated state and dispersed state is over 1300, greater than that of TPE-Br (I/I0 = 380). More importantly, the exceptional thermal motion of Si-O-Si chains and AIE characteristic of TPE moiety work together, enabling PDMS-TPE to show specific temperature-dependent fluorescence with a wider response range of room temperature to 190°C, which is distinguished from TPE-Br. And such fluorescence responsiveness possess good fatigue-resistance. Furthermore, fluorescent silicone rubbers, r-PDMS-TPE were prepared by using PDMS-TPE as additive of the base gum. They display interesting solvent-controllable fluorescence and higher tensile strength (4.42 MPa) than the control sample without TPE component (1.96 MPa). Notably, a unique stretching-enhanced emission (SEE) phenomenon is observed from these TPE-modified silicone rubbers. When being stretched, the rubbers' fluorescent emission intensity could increase by 143%.

Synergistic Approaches in the Design and Applications of UCST Polymers

This review summarizes recent progress in the synergistic design strategy for thermoresponsive polymers possessing an upper critical solution temperature (UCST) in aqueous systems. To achieve precise control of the responsive behavior of the UCST polymers, their molecular design can benefit from a synergistic effect of hydrogen bonding with other interactions or modification of the chemical structures. The combination of UCST behavior with other stimuli-responsive properties of the polymers may yield new functional materials with potential applications such as sensors, actuators, and controlled release devices. The advances in this area provide insight or inspiration into the understanding and design of functional UCST polymers for a wide range of applications.

Advancements in Biosensors Based on the Assembles of Small Organic Molecules and Peptides

Over the past few decades, molecular self-assembly has witnessed tremendous progress in a variety of biosensing and biomedical applications. In particular, self-assembled nanostructures of small organic molecules and peptides with intriguing characteristics (e.g., structure tailoring, facile processability, and excellent biocompatibility) have shown outstanding potential in the development of various biosensors. In this review, we introduced the unique properties of self-assembled nanostructures with small organic molecules and peptides for biosensing applications. We first discussed the applications of such nanostructures in electrochemical biosensors as electrode supports for enzymes and cells and as signal labels with a large number of electroactive units for signal amplification. Secondly, the utilization of fluorescent nanomaterials by self-assembled dyes or peptides was introduced. Thereinto, typical examples based on target-responsive aggregation-induced emission and decomposition-induced fluorescent enhancement were discussed. Finally, the applications of self-assembled nanomaterials in the colorimetric assays were summarized. We also briefly addressed the challenges and future prospects of biosensors based on self-assembled nanostructures.

Surfactant-Modulated a Highly Sensitive Fluorescent Probe of Fully Conjugated Covalent Organic Nanosheets for Detecting Copper Ions in Aqueous Solution

Efficient detection of aqueous copper ions is of high significance for environmental and human health, since copper is involved in potent redox activity in physiological and pathological processes. Covalent organic frameworks (COFs) have shown advantages in efficient capturing and detecting of copper ions due to their large surface area, robust chemical stability, and high sensitivity, but most of them are hydrophobic, leading to the limitation in sensing copper ions in aqueous media. Herein, the design and synthesis of an sp² -carbon conjugated COF (sp² -TPE-COF) are reported with surfactant-assisted water dispersion for detecting traces of copper ions based on the photo-induced electron transfer (PET) mechanism. Importantly, the olefin-linked conjugated backbone of sp² -TPE-COF works as a signal amplified transducer for metal ion sensing. Notably, it is found that a surfactant-assisted strategy can greatly enhance COF's dispersion in aqueous solution and finely modulate their sensitivity with a significantly improved K_SV to 15.15 × 10⁴ m^-1 in SDBS (sodium dodecyl benzene sulfonate) solution, the value of which is larger than that of a majority of COF/MOF based sensors for copper ions. This research demonstrates the promise of surfactant modulated fully π-conjugated COFs for sensing applications.

Sulfuric-acid-mediated synthesis strategy for multi-colour aggregation-induced emission fluorescent carbon dots: Application in anti-counterfeiting, information encryption, and rapid cytoplasmic imaging

Aggregation-induced emission fluorescent carbon dots (AIE-CDs) have applications in the fields of multi-colour anti-counterfeiting, information encryption, and imaging. In this study, four AIE-CDs (B-AIE-CDs, G-AIE-CDs, Y-AIE-CDs, and O-AIE-CDs) with blue, green, yellow, and orange fluorescence at high concentrations were fabricated using crystal violet as a precursor, solutions with different sulfuric acid concentrations as solvents under different temperatures and reaction times for the first time. The structural properties and fluorescence behaviour of the AIE-CDs were investigated. The results revealed that the sulfuric acid concentration had a significant effect on the fluorescence colour of the AIE-CDs because sulfuric acid can affect the degree of carbonisation, the type and content of nitrogen. Moreover, the reaction temperature and time affected the surface-defect state and the degree of carbonisation of the AIE-CDs, which affected the emission wavelength and quantum yield (QY) of the AIE-CDs. Furthermore, to exploit the unique characteristics (polychromatic aggregation fluorescence and acid-sensitive properties) of the obtained-AIE-CDs, anti-counterfeiting and information encryption methodologies (i.e., acid-stimuli-response producing multi-colour fluorescence) were preliminarily developed. Finally, B-AIE-CDs with a high QY of 43.5% were successfully used for rapid cytoplasmic imaging, demonstrating their applicability in biological fields.

Fluorescent Polymers Conspectus

The development of luminescent materials is critical to humankind. The Nobel Prizes awarded in 2008 and 2010 for research on the development of green fluorescent proteins and super-resolved fluorescence imaging are proof of this (2014). Fluorescent probes, smart polymer machines, fluorescent chemosensors, fluorescence molecular thermometers, fluorescent imaging, drug delivery carriers, and other applications make fluorescent polymers (FPs) exciting materials. Two major branches can be distinguished in the field: (1) macromolecules with fluorophores in their structure and (2) aggregation-induced emission (AIE) FPs. In the first, the polymer (which may be conjugated) contains a fluorophore, conferring photoluminescent properties to the final material, offering tunable structures, robust mechanical properties, and low detection limits in sensing applications when compared to small-molecule or inorganic luminescent materials. In the latter, AIE FPs use a novel mode of fluorescence dependent on the aggregation state. AIE FP intra- and intermolecular interactions confer synergistic effects, improving their properties and performance over small molecules aggregation-induced, emission-based fluorescent materials (AIEgens). Despite their outstanding advantages (over classic polymers) of high emission efficiency, signal amplification, good processability, and multiple functionalization, AIE polymers have received less attention. This review examines some of the most significant advances in the broad field of FPs over the last six years, concluding with a general outlook and discussion of future challenges to promote advancements in these promising materials that can serve as a springboard for future innovation in the field.

Molecular Encapsulation of Naphthalene Diimide (NDI) Based π-Conjugated Polymers: A Tool for Understanding Photoluminescence

Conjugated polymers are an important class of chromophores for optoelectronic devices. Understanding and controlling their excited state properties, in particular, radiative and non-radiative recombination processes are among the greatest challenges that must be overcome. We report the synthesis and characterization of a molecularly encapsulated naphthalene diimide-based polymer, one of the most successfully used motifs, and explore its structural and optical properties. The molecular encapsulation enables a detailed understanding of the effect of interpolymer interactions. We reveal that the non-encapsulated analogue P(NDI-2OD-T) undergoes aggregation enhanced emission; an effect that is suppressed upon encapsulation due to an increasing π-interchain stacking distance. This suggests that decreasing π-stacking distances may be an attractive method to enhance the radiative properties of conjugated polymers in contrast to the current paradigm where it is viewed as a source of optical quenching.

Recent Progress in Polymeric AIE-Active Drug Delivery Systems: Design and Application

Aggregation-induced emission (AIE) provides a new opportunity to overcome the drawbacks of traditional aggregation-induced quenching of chromophores. The applications of AIE-active fluorophores have spread across various fields. In particular, the employment of AIEgens in drug delivery systems (DDSs) can achieve imaging-guided therapy and pharmacodynamic monitoring. As a result, polymeric AIE-active DDSs are attracting increasing attention due to their obvious advantages, including easy fabrication and tunable optical properties by molecular design. Additionally, the design of polymeric AIE-active DDSs is a promising method for cancer therapy, antibacterial treatment, and pharmacodynamic monitoring, which indeed helps improve the effectiveness of related disease treatments and confirms its potential social importance. Here, we summarize the current available polymeric AIE-active DDSs from design to applications. In the design section, we introduce synthetic strategies and structures of AIE-active polymers, as well as responsive strategies for specific drug delivery. In the application section, typical polymeric AIE-active DDSs used for cancer therapy, bacterial treatment, and drug delivery monitoring are summarized with selected examples to elaborate on their wide applications.

Synthesis of Conjugated Polymers via Transition Metal Catalysed C-H Bond Activation

Transition metal catalysed C-H bond activation chemistry has emerged as an exciting and promising approach in organic synthesis. This allows us to synthesize a wider range of functional molecules and conjugated polymers in a more convenient and more atom economical way. The formation of C-C bonds in the construction of pi-conjugated systems, particularly for conjugated polymers, has benefited much from the advances in C-H bond activation chemistry. Compared to conventional transition-metal catalysed cross-coupling polymerization such as Suzuki and Stille cross-coupling, pre-functionalization of aromatic monomers, such as halogenation, borylation and stannylation, is no longer required for direct arylation polymerization (DArP), which involve C-H/C-X cross-coupling, and oxidative direct arylation polymerization (Ox-DArP), which involves C-H/C-H cross-coupling protocols driven by the activation of monomers' C(sp² )-H bonds. Furthermore, poly(annulation) via C-H bond activation chemistry leads to the formation of unique pi-conjugated moieties as part of the polymeric backbone. This review thus summarises advances to date in the synthesis of conjugated polymers utilizing transition metal catalysed C-H bond activation chemistry. A variety of conjugated polymers via DArP including poly(thiophene), thieno[3,4-c]pyrrole-4,6-dione)-containing, fluorenyl-containing, benzothiadiazole-containing and diketopyrrolopyrrole-containing copolymers, were summarized. Conjugated polymers obtained through Ox-DArP were outlined and compared. Furthermore, poly(annulation) using transition metal catalysed C-H bond activation chemistry was also reviewed. In the last part of this review, difficulties and perspective to make use of transition metal catalysed C-H activation polymerization to prepare conjugated polymers were discussed and commented.

A Tröger's Base-Derived Covalent Organic Polymer Containing Carbazole Units as a High-Performance Supercapacitor

Porous organic polymers have been received considerable attention due to their heteroatom-containing structures and high surface areas, which can offer high electrochemical performance in energy applications. The majority of reported Tröger's base-functionalized porous organic polymers have been applied as effective candidates for sensing and gas separation/adsorption, while their use as electrode materials in supercapacitors is rare. Here, a novel covalent microporous organic polymer containing carbazole and Tröger's base CzT-CMOP has been successfully synthesized through the one-pot polycondensation of 9-(4-aminophenyl)-carbazole-3,6-diamine (Cz-3NH₂) with dimethoxymethane. The polycondensation reaction's regioselectivity was studied using spectroscopic analyses and electronic structure calculations that confirmed the polycondensation occurred through the second and seventh positions of the carbazole unit rather than the fourth and fifth positions confirmed by first-principles calculations. Our CzT-CMOP exhibited high thermal stability of approximately 463.5 °C and a relatively high Brunauer-Emmett-Teller surface area of 615 m² g^-1 with a nonlocal density functional theory's pore size and volume of 0.48 cm³ g^-1 and 1.66 nm, respectively. In addition, the synthesized CzT-CMOP displayed redox activity due to the existence of a redox-active carbazole in the polymer skeleton. CzT-CMOP revealed high electrochemical performance when used as active-electrode material in a three-electrode supercapacitor with an aqueous electrolyte of 6 M KOH, and it showed specific capacitance of 240 F g^-1 at a current density of 0.5 A g^-1 with excellent stability after 2000 cycles of 97% capacitance retention. Accordingly, such porous organic polymer appears to have a variety of uses in energy-related applications.

Intrinsic hydroquinone-functionalized aggregation-induced emission core shows redox and pH sensitivity

Aggregation-induced emission (AIE) fluorophores exhibit strong fluorescence in an aggregated state but emit no or weak fluorescence in dilute solutions. This emerging class of AIE optical materials comprise a variety of functionalities. Here an AIE luminescence core, 1-hydroquinol-1,2,2-triphenylethene (HQTPE), has been designed and synthesized. This AIE core is simple but is fundamentally important to chemistry because of its intrinsic redox and pH activities. The incorporation of hydroquinone (HQ) moiety into a common AIE core tetraphenylethene (TPE) yields HQTPE with unique fluorescent properties like nonlinear self-quenching over most other AIE-active fluorophores (AIEgens) so far reported. There are differences of photochemical properties between HQTPE, 1-benzoquinol-1,2,2-triphenylethene (QTPE, the oxidized counterpart) and its anions. Interestingly, as the solution concentration is increased, AIEgen HQTPE shows stronger fluorescence but QTPE exhibits rapid quenching of fluorescence in a nonlinear fashion, which are in agreement with theoretical studies. The fluorescence of HQTPE is also highly dependent on the pH value of media. We have further explored HQTPE as an ultrasensitive redox probe and efficient deoxidizer, which could lead to potential applications in health care, food security, environmental monitoring, optic and electronic devices.

Diels-Alder Polymer Networks with Temperature-Reversible Cross-Linking-Induced Emission

A novel synthetic strategy gives reversible cross-linked polymeric materials with tunable fluorescence properties. Dimaleimide-substituted tetraphenylethene (TPE-2MI), which is non-emissive owing to the photo-induced electron transfer (PET) between maleimide (MI) and tetraphenylethene (TPE) groups, was used to cross-link random copolymers of methyl (MM), decyl (DM) or lauryl (LM) methacrylate with furfuryl methacrylate (FM). The mixture of copolymer and TPE-2MI in DMF showed reversible fluorescence with "on/off" behavior depending on the Diels-Alder (DA)/retro-DA process, which is easily adjusted by temperature. At high temperatures, the retro-DA reaction is dominant, and the fluorescence is quenched by the photo-induced electron transfer (PET) mechanism. In contrast, at low temperatures, the emission recovers as the DA reaction takes over. A transparent PMFM/TPE-2MI polymer film was prepared which shows an accurate response to the external temperature and exhibited tunable fluorescent "turn on/off" behavior. These results suggest the possible application in areas including information security and transmission. An example of invisible/visible writing is given.

Organic–inorganic nanohybrids based on an AIE luminogen-functional polymer and CdTe/ZnS QDs: morphologies, optical properties, and applications

Dual-emissive organic–inorganic nanohybrid self-assemblies were constructed by binding red-emitting CdTe/ZnS QDs to blue-emitting AIE-active polymeric micelles in water as a fluorescent probe for PA with interesting assembly behaviour.

Self-assembled porous nanoparticles based on silicone polymers with aggregation-induced emission for highly sensitive detection of nitroaromatics

Tetraphenylbenzene functionalized polysiloxane with AIE feature can self-assemble to unique porous structure and show high performance as fluorescent sensor.

A Boron Difluoride Hydrazone (BODIHY) Polymer Exhibits Aggregation-Induced Emission

Polymers that exhibit aggregation-induced emission (AIE) find use, for example, as cell-imaging agents and as fluorometric sensors due to their unique optical properties. However, the structural diversity of AIE-active polymers has not necessarily advanced at the same rate as their applications. In this work, ring-opening metathesis polymerization is used to synthesize the first example of a polymer (M_n  = 61,600 g mol^-1 , Đ = 1.32) containing boron difluoride hydrazone (BODIHY) heterocycles in its repeating unit. The BODIHY monomer and polymer described absorb and emit in the visible region in solution (λ_abs  = 428 and 429 nm, λ_em  = 528 and 526 nm) and as thin films (λ_abs  = 443 and 440 nm, λ_em  = 535 and 534 nm). Monomer (Φ_Film  = 10%) and polymer (Φ_Film  = 6%) exhibit enhanced emission as thin films compared to solution (Φ_Soln  ≤ 1%) as well as AIE upon the addition of water to DMF solutions as a result of restriction of intramolecular motion. Enhancement factors for the monomer and polymer are determined to be 58 and 15, respectively. The title BODIHY polymer exhibited an earlier onset of AIE and enhanced sensitivity to solution viscosity when compared to the parent monomer.

Radiation-Induced In Situ-Printed Nonconjugated Fluorescent Nonwoven Fabric with Superior Fluorescent Properties

A new technique is proposed for the in situ printing of fluorescent fabrics with superior fluorescent properties that have the potential for continuous roll-to-roll production in the industry. Nonconjugated chemical moieties were covalently connected to polyethylene/polypropylene nonwoven fabric (PE/PP NWF) to successfully prepare fluorescent PE/PP NWF, which emits a bright blue light and has a high quantum yield (∼83.35%) that can be attributed to a unique aggregation-induced emission effect. The fluorescent PE/PP NWF exhibits excellent fluorescent stability under high shear forces during accelerated laundering and in harsh chemical environments. The fluorescent PE/PP NWF can also be tailored into diverse shapes and printed in situ with high resolution. The versatility of the method was also demonstrated by fabricating fluorescent materials with different polymer matrices such as Nylon 66 fiber and PE terephthalate membrane.

One-Step Multicomponent Polymerizations for the Synthesis of Multifunctional AIE Polymers

As a new class of functional luminescent materials, polymers with aggregation-induced emission (AIE) feature attract much attention because of their advantages of efficient solid-state fluorescence, excellent processability, structural diversity, and multifunctionalities. Among all polymerization methods toward AIE polymers, multicomponent polymerizations (MCPs) exhibit the merits of simple operation, good atom economy, high polymerization efficiency, broad functional-group tolerance, etc. In this feature article, the recent progress on the development of one-step MCPs for the synthesis of AIE polymers is highlighted. The representative functionalities of the resulting AIE polymers are illustrated. Perspectives on the challenges and future development directions of this field are also discussed.

Natural-Killer-Cell-Inspired Nanorobots with Aggregation-Induced Emission Characteristics for Near-Infrared-II Fluorescence-Guided Glioma Theranostics

Nature has always inspired robotic designs and concepts. It is conceivable that biomimic nanorobots will soon play a prominent role in medicine. The "Terminator" in the science fiction film is a cybernetic organism with living tissue over a metal endoskeleton, which inspired us to develop natural-killer-cell-mimic nanorobots with aggregation-induced emission (AIE) characteristics (NK@AIEdots) by coating a natural kill cell membrane on an AIE-active polymeric endoskeleton, PBPTV, a highly bright NIR-II AIE-active conjugated polymer. Owing to the AIE and soft-matter characteristics of PBPTV, as-prepared NK@AIEdots maintained a superior NIR-II brightness (quantum yield ∼7.9% in water) and good biocompatibility. Besides, they can serve as a tight junction (TJ) modulator to trigger an intracellular signaling cascade, causing TJ disruption and actin cytoskeleton reorganization to form an intercellular "green channel" to help them to cross the blood-brain barrier (BBB) silently. Furthermore, they can initiatively accumulate in glioblastoma cells in the complex brain matrix for high-contrast and through-skull tumor imaging. The tumor growth was also greatly inhibited by these NK@AIEdots under the NIR light illumination. As far as we know, the quantum yield of PBPTV is the highest among the existing NIR-II luminescent conjugated polymers. Besides, the NK-cell biomimetic nanorobots showed great potential for BBB-crossing active delivery.

Preserving High-Efficiency Luminescence Characteristics of an Aggregation-Induced Emission-Active Fluorophore in Thermostable Amorphous Polymers

Luminophores usually suffer from luminescent quenching when introduced into a polymer backbone or side chain, which leads to the inefficient luminescence or even no luminescence of the polymer. In this work, alicyclic imide rings were found to be capable of balancing the donor-acceptor properties between the rigid spacer and the aggregation-induced emission-active fluorophore in light-emitting polymers. Along with the nonplanar and rigid emitter, the suppressed intramolecular charge-transfer effect and interchain disturbance can efficiently preserve the luminescence characteristics of the active center, resulting in high solid-state photoluminescence quantum yields of up to 89%. The amorphous polyimides exhibit excellent thermal properties, such as high glass transition temperature (T_g) values (398 °C) and high thermal decomposition temperature (T_d) values (538 °C). As far as we know, these luminescent polymer materials are of excellent heat resistance with the highest luminescence efficiency reported. The results have significant impact for the precise prediction of the optical properties of light-emitting polymers by appropriate monomer design, providing controllable ways for synthesizing high thermal stability polymeric materials with efficient fluorescence properties.

Room-Temperature Phosphorescence-active Boronate Particles: Characterization and Ratiometric Afterglow-sensing Behavior by Surface Grafting of Rhodamine B

We found that boronate particles (BP), as a self-assembled system prepared by sequential dehydration of benzene-1,4-diboronic acid with pentaerythritol, showed greenish room-temperature phosphorescence (RTP). This emission was observed in both solid and dispersion state in water. To understand the RTP properties, X-ray crystallographic analysis, and density functional theory (DFT) and time-dependent DFT at M06-2X/6-31G(d,p) level were performed using 3,9-dibenzo-2,4,8,10-tetraoxa-3,9-diboraspiro[5.5]undecane (1) as a model compound. Our interest in functionalizing the RTP-active particles led us to graft Rhodamine B onto their surface. The resulting system emitted a dual afterglow via a Förster-type resonance energy transfer process from the BP in the excited triplet state to Rhodamine B acting as an acceptor fluorophore. This emission behavior was used for ratiometric afterglow sensing of water content in THF with a detection limit of 0.28 %, indicating that this study could pave the way for a new strategy for developing color-variable afterglow chemosensors for various analytes.

Helical Assemblies of One-Dimensional Supramolecular Polymers Composed of Helical Macromolecules: Generation of Circularly Polarized Light Using an Infinitesimal Chiral Source

We report the synthesis of one-dimensional supramolecular polymers composed of one-handed helical macromolecules bearing fluorescent pendant groups and the generation of circularly polarized light on the basis of hierarchical chiral amplification starting from a tiny amount of chiral substituent. Copolymerization of benzo[1,2-b:4,5-b']dithiophene-appended achiral/chiral isocyanides (99:1, mol/mol) with a solid-state photoluminescence feature afforded submicrometer supramolecular fibers, in which almost perfect single-handed helical polyisocyanides were noncovalently connected end to end. The resulting helical supramolecular polymers were further helically assembled to form a cholesteric liquid crystal film with an intense circularly polarized luminescence (CPL) signal. Surprisingly, the supramolecular system containing only 0.01 mol % of the chiral monomer unit also emitted the observable circularly polarized light owing to multiple chiral amplification from an infinitesimal point chirality to helical chirality and then to supramolecular chirality. Furthermore, chiral information was efficiently transferred from the helically assembled supramolecular system containing 1 mol % of the chiral unit to achiral dye molecules blended in the film, allowing full-color tunable induced CPL with luminescence dissymmetry factors greater than 1.0 × 10^-2. This unprecedentedly strong chiral amplification enables the creation of helical supramolecular polymers and chirally assembled systems with various chiral functions based solely on an infinitesimal chiral source.

Organobase-catalysed hydroxyl–yne click polymerization

An efficient organobase (DABCO)-catalysed hydroxyl–yne click polymerization is successfully developed under mild conditions.

Recent Advances in Aggregation-Induced Electrochemiluminescence

The emergence of the rising alliance between aggregation-induced emission (AIE) and electrochemiluminescence (ECL) is defined as aggregation-induced electrochemiluminescence (AIECL). The booming science of AIE has proved to be not only distinguished in luminescent materials but could also inject new possibility into ECL analysis. Especially in the aqueous phase and solid state for hydrophobic materials, AIE helps ECL circumvent the dilemma between substantial emission intensity and biocompatible media. The wide range of analytes makes ECL an overwhelmingly interesting analytical technique. Therefore, AIECL has gained potential in clinical diagnostics, environmental assays, and biomarker detections. This review will focus on introduction of the novel concept of AIECL, current applied luminophores, and related applications developed in recent years.

Aggregation-Induced Electrochemiluminescence by Metal-Binding Protein Responsive Hydrogel Scaffolds

Functionalized hydrogels have aroused general interest due to their versatile applications in biomaterial fields. This work reports a hydrogel network composed of gold nanoclusters linked with bivalent cations such as Ca²⁺ , Mg²⁺ , and Zn²⁺ . The hydrogel exhibits both aggregation-induced emission (AIE) and aggregation-induced electrochemiluminescence (AIECL) effects. Most noteworthy, the AIECL effect (≈50-fold enhancement) is even more significant than the corresponding AIE effect (approximately fivefold enhancement). Calmodulin, a Ca²⁺ binding protein, may efficiently regulate the AIECL dynamics after specific binding of the Ca²⁺ linker, with the linear range from 0.3 to 50 µg mL^-1 and a limit of detection of 0.1 µg mL^-1 . Considering the important roles of bivalent cations in the life system, these results may pave a new avenue for the design of a biomolecule-responsive AIECL-type hydrogel with multifunctional biomedical purposes.

A polymerizable aggregation-induced emission dye for fluorescent nanoparticles: synthesis, molecular structure and application in cell imaging

This work reports the fabrication of a novel polymerizable AIE dye and its amphiphilic PEG-TS fluorescent polymers via RAFT polymerization, which were attractive for the application in cell imaging.

Enhanced fluorescence quantum yield of syndiotactic side-chain TPE polymers via Rh-catalyzed carbene polymerization: influence of the substitution density and spacer length

The fluorescence quantum yields of the TPE-based C1 polymers also increase with the shortened spacer lengths and further improve by about 20% as compared with the corresponding C2 polyacrylate counterparts.

Cu(0)-RDRP as an efficient and low-cost synthetic route to blue-emissive polymers for OLEDs

Cu(0)-RDRP has been used to prepare deep-blue emissive polymers for OLEDs using a simple room-temperature procedure with copper wire catalyst.