Biodegradable functional biomaterials exploiting substituted trimethylene carbonates and organocatalytic transesterification

Tailored Polymersomes for Enhanced Oral Drug Delivery: pH-Sensitive Systems for Intestinal Delivery of Immunosuppressants

Ensuring precise drug release at target sites is crucial for effective treatment. Here, pH-responsive nanoparticles for oral administration of mycophenolate mofetil, an alternative therapy for patients with inflammatory bowel disease unresponsive to conventional treatments is developed. However, its oral administration presents challenges due to its low solubility in the small intestine and high solubility and absorption in the stomach. Therefore, this aim is to design a drug delivery system capable of maintaining drug solubility compared to the free drug while delaying absorption from the stomach to the intestine. Successful synthesis and assembly of a block copolymer incorporating a pH-responsive functional group is achieved. Dynamic light scattering indicated a significant change in hydrodynamic size when the pH exceeded 6.5, confirming successful incorporation of the pH-responsive group. Encapsulation and controlled release of mycophenolate mofetil are efficiently demonstrated, with 90% release observed at intestinal pH. In vitro cell culture studies confirmed biocompatibility, showing no toxicity or adverse effects on Caco-2 cells. In vivo oral rat studies indicated reduced drug absorption in the stomach and enhanced absorption in the small intestine with the developed formulation. This research presents a promising drug delivery system with potential applications in the treatment of inflammatory bowel disease.

Use of Biomaterials in 3D Printing as a Solution to Microbial Infections in Arthroplasty and Osseous Reconstruction

The incidence of microbial infections in orthopedic prosthetic surgeries is a perennial problem that increases morbidity and mortality, representing one of the major complications of such medical interventions. The emergence of novel technologies, especially 3D printing, represents a promising avenue of development for reducing the risk of such eventualities. There are already a host of biomaterials, suitable for 3D printing, that are being tested for antimicrobial properties when they are coated with bioactive compounds, such as antibiotics, or combined with hydrogels with antimicrobial and antioxidant properties, such as chitosan and metal nanoparticles, among others. The materials discussed in the context of this paper comprise beta-tricalcium phosphate (β-TCP), biphasic calcium phosphate (BCP), hydroxyapatite, lithium disilicate glass, polyetheretherketone (PEEK), poly(propylene fumarate) (PPF), poly(trimethylene carbonate) (PTMC), and zirconia. While the recent research results are promising, further development is required to address the increasing antibiotic resistance exhibited by several common pathogens, the potential for fungal infections, and the potential toxicity of some metal nanoparticles. Other solutions, like the incorporation of phytochemicals, should also be explored. Incorporating artificial intelligence (AI) in the development of certain orthopedic implants and the potential use of AI against bacterial infections might represent viable solutions to these problems. Finally, there are some legal considerations associated with the use of biomaterials and the widespread use of 3D printing, which must be taken into account.

Fabrication and characterization of poly(lactic acid-trimethylene carbonate) based biodegradable composite films

Two biobased composite films have been prepared with poly (lactic acid-trimethylene carbonate), polylactic acid and Laponite by solvent evaporation method. The 1H NMR and FTIR spectrums illustrate that P (LA-TMC) polymer is successfully synthesized and designed composite films are produced. Morphometric analyses demonstrate that the roughnesses of the film's surface and cross-section are on the increase with higher PLA and Laponite content. Mechanical performances reveal that the rise in tensile strength and modulus while maintaining excellent elongation at break is mainly due to the increase in the content of polylactic acid and Laponite. By utilizing the nano effect of Laponite, the maximum tensile strength of the composite film reaches 34.59 MPa. Thermal property results illustrate that the Tg and initial decomposition temperature are on the growth with the increase of PLA content. However, it is not significant on the effect of Laponite on the initial decomposition temperature. The water vapor permeability measurements prove that the barrier property of P(LA-TMC)/PLA/Laponite composite film is on the ascent with the Laponite addition. Hydrolytic degradation tests indicate that PLA and Laponite play avital part in accelerating the degradation rate of composite films and alkaline media is superior acidic and neutral conditions.

Organocatalyzed ring-opening reactions of γ-carbonyl-substituted ε-caprolactones

Side-chain-functionalized aliphatic polyesters are promising as functional biodegradable polymers. We have investigated ring-opening reactions of γ-carbonyl-substituted ε-caprolactones (gCCLs) to obtain poly(ε-caprolactone) (PCL) analogues. Organic catalysts and Sn(Oct)2 often used for the ring-opening polymerization (ROP) of ε-caprolactone (CL) have been explored to find the conditions for the formation of polymeric products of gCCLs. We confirmed the consumption of gCCLs in all catalyzed reactions. However, chain propagation hardly occurs, as the propagating species are preferentially transformed to α-substituted five-membered lactones when the substituents are linked by ester or not sterically hindered. Intramolecular cyclization to form thermodynamically stable five-membered lactones releases alcohols and amines, serving as nucleophiles for the subsequent ring opening of other gCCLs. Thus, apparent chain reactions are realized for continuous consumption of gCCLs. The reaction preference remains unchanged independent of the catalysts, although the reactions of the amide-linked gCCLs by acidic catalysts are slightly mitigated. Finally, copolymerization of CL and a gCCL catalyzed by diphenyl phosphate has been investigated, which enables the chain propagation reaction to yield the linear oligomers of PCL analogues containing up to 16 mol% of gCCL units. This study contributes to understanding the chemistry of ring-opening reactions of substituted lactones for designing functional degradable polymers.

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

Ring-Opening Polymerization of Trimethylene Carbonate with Phosphazene Organocatalyst

Aliphatic polycarbonate (APC) compounds are an important class of biodegradable materials with excellent biocompatibility, good biodegradability, and low toxicity, and the study of these compounds and their modification products aims to obtain biodegradable materials with better performance. In this context, the ring-opening polymerization (ROP) of trimethylene carbonate (TMC) from a low nucleophilic organic superbase of phosphazene (t-BuP₄) as a catalyst and benzyl alcohol (BnOH) as an initiator at room temperature was carefully studied to prepare poly(trimethylene carbonate) (PTMC) which is one of the most studied APC. ¹H NMR and SEC measurements clearly demonstrate the presence of a benzyloxy group at the α-terminus of the obtained PTMC homopolymers while investigation of the polymerization kinetics confirms the controlled/living nature of t-BuP₄-catalyzed ROP of TMC. On the basis of this, the block copolymerization of TMC and δ-valerolactone (VL)/ε-caprolactone (CL) was successfully carried out to give PTMC-b-PCL and PTMC-b-PVL copolymers. Furthermore, PTMC with terminal functionality was also prepared with the organocatalytic ROP of TMC through functional initiators. We believe that the present ROP system is a robust, highly efficient, and practical strategy for producing excellent biocompatible and biodegradable PTMC-based materials.

A theoretical approach to investigating the mechanism of action and efficiency of N-heterocyclic olefins as organic catalysts for transesterification reactions

For the first time, it is theoretically proved that carbonyl ester reactions with alcohols can be facilitated by activation of fully-planar NHOs via zwitterionic species.

Bespoke 3D-Printed Polydrug Implants Created via Microstructural Control of Oligomers

Controlling the microstructure of materials by means of phase separation is a versatile tool for optimizing material properties. Phase separation has been exploited to fabricate intricate microstructures in many fields including cell biology, tissue engineering, optics, and electronics. The aim of this study was to use phase separation to tailor the spatial location of drugs and thereby generate release profiles of drug payload over periods ranging from 1 week to months by exploiting different mechanisms: polymer degradation, polymer diluent dissolution, and control of microstructure. To achieve this, we used drop-on-demand inkjet three-dimensional (3D) printing. We predicted the microstructure resulting from phase separation using high-throughput screening combined with a model based on the Flory-Huggins interaction parameter and were able to show that drug release from 3D-printed objects can be predicted from observations based on single drops of mixtures. We demonstrated for the first time that inkjet 3D printing yields controllable phase separation using picoliter droplets of blended photoreactive oligomers/monomers. This new understanding gives us hierarchical compositional control, from droplet to device, allowing release to be "dialled up" without manipulation of device geometry. We exemplify this approach by fabricating a biodegradable, long-term, multiactive drug delivery subdermal implant ("polyimplant") for combination therapy and personalized treatment of coronary heart disease. This is an important advance for implants that need to be delivered by cannula, where the shape is highly constrained and thus the usual geometrical freedoms associated with 3D printing cannot be easily exploited, which brings a hitherto unseen level of understanding to emergent material properties of 3D printing.

Tuning the thermoreversible temperature domain of PTMC-based networks with thermosensitive links concentration

In this work, thermoreversible poly(trimethylene carbonate) (PTMC) based networks with different crosslinking densities were obtained by Diels-Alder (DA) reaction between furan-functionalized PTMC precursors and a bismaleimide. Furan-grafted PTMC with various functionalities determined by ¹H-NMR analyses were prepared from telechelic PTMC oligomer, glycerol, 4,4'-methylenebis(cyclohexyl isocyanate) (H₁₂MDI) and furfuryl alcohol. The formation of network structures by DA reaction between furan and maleimide groups were proved by Fourier-transform infrared spectroscopy (FT-IR). Although both exo and endo DA adduct forms exist, the thermally more stable exo form dominates. The thermoreversibility of networks was evidenced by FT-IR, solubility, differential scanning calorimetry (DSC) and rheology experiments at different temperatures. By increasing furan functionality or node concentration, denser and stiffer networks could be formed with higher Young's modulus and true stress at break in tensile tests, as well as higher crossover temperature, which indicates a nominal transition from elastic behavior to viscous state. The disruption of networks was found to occur in high temperature ranges from 130 to 160 °C, depending on their crosslinking density.

Modulating bioactivities of primary ammonium-tagged antimicrobial aliphatic polycarbonates by varying length, sequence and hydrophobic side chain structure

A highly antimicrobial, biocompatible, and fast biodegradable polycarbonate has been developed by incorporating primary ammonium and monoether side chains.

Synthesis of aliphatic polycarbonates with a tuneable thermal response

The synthesis of aliphatic polycarbonates with a tuneable thermal-response is reported by a ‘click-and mix’ approach.

Recent development of functional aliphatic polycarbonates for the construction of amphiphilic polymers

Functional aliphatic polycarbonates in the construction of amphiphilic polymers are summarized in seven categories (hydrophobic, hydrophilic, or/and functional unit).