A plasmonic route for the integrated wireless communication of subdiffraction-limited signals

A Floquet engineering approach to optimize Schottky junction-based surface plasmonic waveguides

The ability to finely control the surface plasmon polariton (SPP) modes of plasmonic waveguides unveils many potential applications in nanophotonics. This work presents a comprehensive theoretical framework for predicting the propagation characteristics of SPP modes at a Schottky junction exposed to a dressing electromagnetic field. Applying the general linear response theory towards a periodically driven many-body quantum system, we obtain an explicit expression for the dielectric function of the dressed metal. Our study demonstrates that the dressing field can be used to alter and fine-tune the electron damping factor. By doing so, the SPP propagation length could be controlled and enhanced by appropriately selecting the intensity, frequency and polarization type of the external dressing field. Consequently, the developed theory reveals an unexplored mechanism for enhancing the SPP propagation length without altering other SPP characteristics. The proposed improvements are compatible with existing SPP-based waveguiding technologies and could lead to breakthroughs in the design and fabrication of state-of-the-art nanoscale integrated circuits and devices in the near future.

Dispersion engineering of spoof plasmonic metamaterials via interdigital capacitance structures

This work presents an approach to realize the dispersion engineering of spoof plasmonic metamaterials with controllable cutoff frequencies. Interdigital capacitance structures are applied to construct the unit cells. Dispersion properties are firstly analyzed to investigate the effects of interdigital capacitance, and the influence of the geometrical parameters of the proposed unit cell on the cutoff frequencies is studied. Then, a spoof surface plasmon polariton (SSPP) transmission line (TL) is developed based on the proposed unit cell together with a smooth transition. The matching principles of the transition are explained by the dispersion curves and the normalized impedance of the corresponding matching unit cells. Finally, the transmission characteristics of the TL are simulated and measured to validate the feasibility of the proposed strategy. Both the lower and upper cutoff frequencies can be tuned jointly by the extra degrees of freedom provided by the interdigital capacitance structures. In comparison with designs based on a substrate-integrated waveguide (SIW), the proposed strategy can reduce the transversal dimension by a factor of two under the same conditions. This work can greatly accelerate the development of versatile microwave integrated circuits and systems based on spoof plasmonic metamaterials.

Stretchable and self-healable spoof plasmonic meta-waveguide for wearable wireless communication system

Microwave transmission lines in wearable systems are easily damaged after frequent mechanical deformation, posing a severe threat to wireless communication. Here, we report a new strategy to achieve stretchable microwave transmission lines with superior reliability and durability by integrating a self-healable elastomer with serpentine-geometry plasmonic meta-waveguide to support the spoof surface plasmon polariton (SSPP). After mechanical damage, the self-healable elastomer can autonomously repair itself to maintain the electromagnetic performance and mechanical strength. Meanwhile, the specially designed SSPP structure exhibits excellent stability and damage resistance. Even if the self-healing process has not been completed or the eventual repair effect is not ideal, the spoof plasmonic meta-waveguide can still maintain reliable performance. Self-healing material enhances strength and durability, while the SSPP improves stability and gives more tolerance to the self-healing process. Our design coordinates the structural design with material synthesis to maximize the advantages of the SSPP and self-healing material, significantly improving the reliability and durability of stretchable microwave transmission lines. We also perform communication quality experiments to demonstrate the potential of the proposed meta-waveguide as interconnects in future body area network systems.

Spoof surface plasmonics: principle, design, and applications

Surface plasmon polaritons (SPPs) are interactions between incident electromagnetic waves and free electrons on the metal-dielectric interface in the optical regime. To mimic SPPs in the microwave frequency, spoof SPPs (SSPPs) on ultrathin and flexible corrugated metallic strips were proposed and designed, which also inherit the advantages of lightweight, conformal, low profile, and easy integration with the traditional microwave circuits. In this paper, we review the recent development of SSPPs, including the basic concept, design principle, and applications along with the development from unwieldy waveguides to ultrathin transmission lines. The design schemes from passive and active devices to SSPP systems are presented respectively. For the passive SSPP devices, the related applications including filters, splitters, combiners, couplers, topological SSPPs, and radiations introduced. For the active SSPP devices, from the perspectives of transmission and radiation, we present a series of active SSPP devices with diversity and flexibility, including filtering, amplification, attenuation, nonlinearity, and leaky-wave radiations. Finally, several microwave systems based on SSPPs are reported, showing their unique advantages. The future directions and potential applications of the ultra-thin SSPP structures in the microwave and millimeter-wave regions are discussed.

Excitation and manipulation of both magnetic and electric surface plasmons

Surface plasmons (SPs) is the cornerstone in terahertz (THz) near-field photonics, which play crucial roles in the miniaturization and integration of functional devices. The excitation and manipulation of SPs, however, is currently restricted to electric SPs paradigm, while magnetic SPs receive less attention despite the importance of magnetic light-matter interactions. Here, a scheme is proposed to simultaneously convert the propagating waves in free space into magnetic and electric SPs using a single ultracompact device. First, a plasmonic structure composed of connected slit rings is designed and demonstrated to support both electric and magnetic SPs, which is ascribed to the two distinct eigenmodes of oscillating electrons and vortex currents, respectively. Second, with the assistance of an anisotropic and gradient metasurface, orthogonal linear polarized components of incident THz beams are coupled into different electric and magnetic SP channels with little crosstalk. Furthermore, by encoding two distinct polarization-dependent phase profile into the metasurface, it is shown that the resulting meta-device can individually tailor the wavefronts of magnetic and electric SPs, thus simultaneously engineering magnetic and electric near-field distributions. This work can pave the road to realize bi-channel and on-chip devices, and inspire more integrated functionalities especially related to near-field manipulations of magnetic SPs.

Active spoof plasmonics: from design to applications

Spoof plasmonic metamaterials enable the transmission of electromagnetic energies with strong field confinement, opening new pathways to the miniaturization of devices for modern communications. The design of active, reconfigurable, and nonlinear devices for the efficient generation and guidance, dynamic modulation, and accurate detection of spoof surface plasmonic signals has become one of the major research directions in the field of spoof plasmonic metamaterials. In this article, we review recent progress in the studies on spoof surface plasmons with a special focus on the active spoof surface plasmonic devices and systems. Different design schemes are introduced, and the related applications including reconfigurable filters, high-resolution sensors for chemical and biological sensing, graphene-based attenuators, programmable and multi-functional devices, nonlinear devices, splitters, leaky-wave antennas and multi-scheme digital modulators are discussed. The presence of active SSPPs based on different design schemes makes it possible to dynamically control electromagnetic waves in real time. The promising future of active spoof plasmonic metamaterials in the communication systems is also speculated.

Broadband and wide-angle metamaterial absorber based on the hybrid of spoof surface plasmonic polariton structure and resistive metasurface

Electromagnetic (EM) wave absorber with broad and robust absorption performance over wide incident angle range is persistently desired in specific applications. In this work, we propose and demonstrate a broadband and wide-angle metamaterial absorber (MA) based on a hybrid of stereo spoof surface plasmonic polariton (SSPP) structure and planar resistive metasurface. At first, we design a broadband SSPP absorber by adjusting the dispersion and loss of the artificial plasmonic structure (PS) simultaneously. Furthermore, owing to utilize its spatial phase manipulation ability, we integrate a resistive metasurface on top of the PS to construct a modified circuit analog (CA) absorber with a dispersive metamaterial spacer. The absorption mechanism of the hybrid structure is analyzed theoretically. The results indicate that the hybrid MA is equipped with broad and robust absorption performance over a wide incident angle range due to the synergistic absorption of the PS and metasurface. Finally, a prototype of the hybrid MA is fabricated by silk-printing technic and its absorption performances are measured. The experimental results can verify the theoretic ones and indicate that proposed hybrid MA can achieve 90% absorptivity from 3.9 GHz to 10.6 GHz with thickness of 7.0 mm, which is only 106% times of the ultimate thickness corresponding to the absorption performance of MA. In general, the concept and design offer a distinct approach of utilizing SSPP to design absorbers with excellent performances from radio frequency to optic band, which are promising for extensive applications.

Reconfigurable Parametric Amplifications of Spoof Surface Plasmons

Next-generation inter-chip communication requires ultrafast ultra-compact interconnects. Designer plasmonics offers a possible route towards this goal. Further development of the plasmonic technique to circuit applications requires the direct amplification of plasmonic signals on a compact platform. However, significant signal distortions and limited operational speeds prevent the application of traditional MOS-based amplifiers to plasmonics. Up to day, the amplification of surface plasmons without phase distortion has remained a scientific challenge. In this work, the concept of parametric amplification (PA) is transplanted to the plasmonics and is realized experimentally an ultrathin reconfigurable PA using a spoof surface plasmon polariton (SSPP) waveguide integrated with tunable and nonlinear varactors. The measured parametric gain in the experiment can reach up to 9.14 dB within a short nonlinear propagation length, for example, six SSPP wavelengths, in excellent agreement with the theoretical prediction. By tuning the bias voltage of varactors, the phase-matching condition can be precisely controlled over a broad frequency band, enabling the authors to realize the multi-frequency PA of plasmonic signals. Measured phase responses confirm that the plasmonic parametric amplifier can significantly suppress the signal distortions as compared with the traditional MOS-based amplifier, which is a property highly desired for ultrafast wireless communication systems and integrated circuits.

Mobile ions determine the luminescence yield of perovskite light-emitting diodes under pulsed operation

The external quantum efficiency of perovskite light-emitting diodes (PeLEDs) has advanced quickly during the past few years. However, under pulsed operation, an operation mode which is important for display and visible light communication, the performance of PeLEDs changes a lot and requires in-depth understanding to facilitate these applications. Here, we report the response of PeLEDs under pulsed operation in the range of 10 Hz to 20 kHz. Beyond transient effects in the low frequencies, we find that for higher frequencies (>500 Hz) the transient electroluminescence intensity depends strongly on the duty cycle. This feature is much more pronounced and of different origin than that in conventional LEDs. We rationalise our experimental observations using a mathematical model and assign these features to the effect of mobile ionic charges in the perovskite. Our work also provides important implications for the operation of PeLEDs under the steady state, where accumulation of mobile ions at the interfaces could be beneficial for high electroluminescence yields but harmful for the long-term stability.

Quasi-continuous linear phase-gradient metamaterial based on conformal spoof surface plasmon polaritons

In this work, we propose a method of achieving quasi-continuous linear phase gradient for transmitted waves based on conformal spoof surface plasmon polariton (SSPP). To this end, a SSPP structure with high transmission is firstly designed as the unit cell of the metamaterial. To obtain the phase gradient, SSPP structures are arranged delicately in a way that they are conformal to the brachistochrone curve. In this way, quasi-continuous linear Pancharatnam-Berry (PB) phase profile can be realized strictly along one of the two transverse directions. To verify this idea, a dual-band transmissive metamaterial operating in X and Ku band was designed, fabricated and measured. Due to the phase gradient imparted by the conformal SSPP structures, high-efficiency anomalous refraction can be realized within the two bands. Different from the general PGM, the phase gradient of the conformal SSPP structure allows us to achieve the desired anomalous refraction angle without reconstructing the PB phase. Both the simulation and measurement results are well consistent with theoretical predictions. This work provides another strategy of achieving anomalous refraction and may find applications in beam steering, digital beam forming, etc.

A Compact Component for Multi-Band Rejection and Frequency Coding in the Plasmonic Circuit at Microwave Frequencies

Plasmonic circuits, which support the propagation of spoof surface plasmon polaritons (SSPPs) at microwave frequencies, have been developed in recent years as an expected candidate for future highly integrated systems, mainly because of their extraordinary field confinements and sub-wavelength resolution. On the other hand, artificial electromagnetic (EM) resonators are widely adopted in metamaterial design for flexible resonance and band gaps. In this work, an electrically small complementary spiral, which is made up of six helix branches sculptured in the ground, is proposed to achieve independent resonances at six different frequency bands. Combined with the grounded corrugated transmission line (TL), the proposed component can provide designable multi-band rejection, and compose frequency coding circuits with a compact size (less than λ0/4). The complementary spirals excited with the bending TL and the straight one are both investigated, and independence band rejections and designed 6-bit coding sequences in the frequency spectrum are demonstrated numerically and experimentally. Hence, it is concluded that such compact components can be adopted to flexibly control the rejection of waves in multi-frequency bands, and benefits the development of frequency-identification circuits and systems.

On-chip metalenses based on one-dimensional gradient trench in the broadband visible

Metasurfaces are composed of flat, ultrathin subwavelength nanoantennas with strong capability in manipulating light propagation by modulations on its phase, amplitude, and polarization. For instance, the invention of two-dimensional (2D) metalenses has enabled light focusing and imaging in three-dimensional (3D) free space with miniaturized thickness and device size at a planar surface. However, such inherent form of 2D arrays and focusing functionality at 3D optical free-space limits the degree of freedom for light propagation and manipulation along a 2D planar surface and eventually the possibility of on-chip photonic system integration. Here, we theoretically study and demonstrate a new type of planar on-chip metalens, which enables light focusing and strong localization at a 2D surface. The planar on-chip architecture design is based on the one-dimensional (1D) length or width gradient trench metalens (GTM), which could yield the elaborately engineered phase shift for propagating light within the on-chip waveguide at the visible wavelength of 500 nm. By generating 1D phase arrangement at the nanoscale, a miniature on-chip metalens with ∼3×0.5µm dimension could achieve light focusing on a 2D waveguide surface with the flexibility to design scalable focal lengths and ultra-high numerical aperture of up to ∼0.99. Additionally, GTM metalens designs could also exhibit overlapped high depth-of-focus, which consequently could behave as achromatic-like lensing at the selected focal plane. Furthermore, we manifest that the focusing functionality can also be subject to dynamically tuning and switching on-and-off with TE/TM polarization change or waveguide index alteration. We believe this new form of on-chip 1D metalens holds potential applications including on-chip light manipulation functionality of focusing and diverging, optical on-chip sensing, next-generation on-chip optical communication, signal processing as well as imaging devices, etc.