Halogen-doped phosphorescent carbon dots for grayscale patterning

Hour-Level Persistent Multicolor Phosphorescence Enabled by Carbon Dot-Based Nanocomposites Through a Multi-Confinement-Based Approach

Hour-level persistent room temperature phosphorescence (RTP) phenomena based on multi-confinement carbon dots (CDs) are reported. The CDs-based system reported here (named Si-CDs@B2O3) can be efficiently synthesized by a simple pyrolysis method compared to the established persistent RTP systems. The binding modes of CDs, silica (SiO2), and boron oxide (B2O3) are deduced from a series of characterizations including XRD, FT-IR, and TEM characterization. Further studies show that the formation of covalent bonds between B2O3, SiO2, and CDs play a key role in activating the persistent RTP and preventing its quenching. This is a rare example of a persistent RTP system that exhibits hourly persistent RTP under environmental conditions. Finally, the applications of Si-CDs@B2O3 are demonstrated for anti-counterfeiting, long-duration phosphorescence imaging, and fingerprinting. This synthetic strategy is expected to provide strong technical support for the preparation of persistent RTP CDs and pave the way for the synthesis of persistent RTP CDs in the future.

A carbon dot-based time-dependent color-changing room temperature phosphorescent material with facile synthesis

Carbon dots have attracted widespread attention due to their excellent optical properties and so on and are therefore used in various fields such as anti-counterfeiting. There are many reports on carbon dot-based room-temperature phosphorescent materials, but there are still fewer reports on carbon dot-based room-temperature phosphorescent materials with time-dependent color-changing properties. In this work, a time-dependent color-changing carbon dot-based room-temperature phosphorescent material with the ability to change from green to blue was successfully prepared by a simple one-pot heating method using hydroxyurea as the only raw material. In this process, hydroxyurea is used as both a carbon and nitrogen source, and in the process of material formation, hydroxyurea also partially forms cyanuric acid as a matrix to make the carbon dots uniformly dispersed in it. By blending the ratio of the dual emission centers of the carbon dots themselves, the final effect of time-dependent color-changing is achieved by taking advantage of the intensity changes and color differences of each emission center. The present work provides new ideas for the preparation of time-dependent color-changing carbon dot-based room-temperature phosphorescent materials.

Symmetry-Triggered Tunable Phosphorescence Lifetime of Graphene Quantum Dots in a Solid State

Studying the phosphorescent mechanisms of carbon nanostructures synthesized by the "bottom-up" approach is key to understanding the structure modulation and the interfacial properties of carbon nanostructures. In this work, the relationships among symmetry of precursors in the "bottom-up" synthesis, structures of products, and phosphorescence lifetimes of graphene quantum dots (GQDs) are studied. The symmetry matching of precursors in the formation of a D6h graphene-like framework is considered the key factor in controlling the separability of sp2 domains in GQDs. As the separability of sp2 domains in GQDs increases, the phosphorescence lifetimes (14.8-125.5 ms) of GQDs in the solid state can be tuned. Machine learning is used to define the degree of disorder (S) of the GQD structure, which quantitatively describes the different space groups of precursors. The negative correlation between S and the oscillator strength of GQDs is uncovered. Therefore, S can be recognized as reflective of oscillator strength in the GQD structure. Finally, based on the correlations found between the structures and phosphorescence lifetimes of GQDs, GQDs with an ultralong phosphorescence lifetime (28.5 s) are obtained. Moreover, GQDs with visible phosphorescence emission (435-618 nm) are synthesized.

Ultralong afterglow of heavy-atom-free carbon dots with a phosphorescence lifetime of up to 3.7 s for encryption and fingerprinting description

Metal-free room-temperature phosphorescent (RTP) materials with changeable colors have attracted great attention in anti-counterfeiting information encryption. Most ultralong-lifetime RTP (URTP) luminophores are traditionally obtained through heavy atom effects via enhancing the spin-orbit coupling efficiency. Here, we report the self-assembly of URTP carbon dots (CDs) using diphenylaminourea as the precursor through a thermal-evaporation assisted covalent-binding approach in the presence of boric acid (BA). The BA-functionalized diphenylaminourea-derived CDs (denoted as D-CDs1.5/BA composites) show a rigid network structure with B-C linkages connected to the surface of the CDs, which can effectively suppress the free vibration of CDs to promote intersystem crossover, finally resulting in an excellent URTP afterglow performance. They feature a low singlet-triplet energy gap and reduced nonradiative attenuation properties. As a result, the D-CDs1.5/BA composites exhibit a bifunctional fluorescence/phosphorescence performance with a high phosphorescence quantum efficiency (12.67%) and an ultra-long green afterglow phosphorescence lifetime of up to 3.66 s. A high-level information encryption and fingerprinting description based on the URTP D-CDs1.5/BA composites were then investigated. This work contributes to the feasible design and preparation of novel URTP CD materials with both ultra-long afterglow and a high phosphorescence efficiency, making them promising candidates for advanced anti-counterfeiting applications.

A Photoactivatable Luminescent Motif through Ring-Flipping Isomerization for Multiple Photopatterning

Photoactivatable luminescent materials have garnered enormous attention in the field of intelligent responsive materials, yet their design and applications remain challenging due to the limited variety of photoactivatable motifs. In the work described herein, we discovered a new photoactivatable luminescent motif that underwent ring-flipping isomerization under UV irradiation. The emission of this motif exhibited a rapid transformation from dark yellow to bright green, accompanied by a significant enhancement of quantum yield from 1.9% to 34.2%. Experimental and theoretical studies revealed that the effective intramolecular motion (EIM) was crucial to the distinct luminescence performance between two isomers. In addition, polymers containing this motif were achieved through a one-pot alkyne polymerization, exhibiting both photofluorochromic and photo-cross-linking properties. Furthermore, multiple types of photopatterning, including luminescent encryption, fluorescent grayscale imaging, and high-resolution photolithographic patterns, were realized. This work developed a new photoactivatable luminescent motif and demonstrated its potential applications in both small molecules and macromolecules, which will help in the future design of photoactivatable luminescent materials.

Afterglow Phosphor Goes Transparent

Recently, transparent afterglow phosphors have attracted increasing interest due to the mitigated self-absorption and the ensuing improved light output, which have inspired many advanced applications, including volumetric display and three-dimensional optical encryption. To date, the most successful afterglow phosphors remain those traditional oxide, nitride, or sulfide powders which are not transparent due to a severe scattering effect. By reduction of the number of interfaces and engineering the refractive index, the scattering effect could be circumvented effectively. To this end, four material systems, including transparent afterglow single crystals, transparent phosphorescent organics, transparent afterglow glass, and luminescent nanocomposites, were reviewed in this Perspective. We started with the discussion of the nontransparency origin. Through a careful inspection of Rayleigh scattering theory, a general solution involving both refractive index and particle size was proposed to reduce the scattering effect. Many representative works on transparent afterglow phosphors were systematically reviewed, where the typical synthesis methods and the advantages and disadvantages of each system were critically presented. In the last part, bottlenecks, prospects, and future development directions based on transparent afterglow phosphors are proposed.

Room Temperature Phosphorescence Carbon Dots: Preparations, Regulations, and Applications

Room temperature phosphorescence (RTP) materials have drawn considerable attention by virtue of their outstanding features. Compared with organometallic complexes and pure organic compounds, carbon dots (CDs) have emerged as a new type of RTP materials, which show great advantages, such as moderate reaction condition, low toxicity, low cost, and tunable optical properties. In this review, the important progress made in RTP CDs is summarized, with an emphasis on the latest developments. The synthetic strategies of RTP CDs will be comprehensively summarized, followed by detailed introduction of their performance regulation and potential applications in anti-counterfeiting, information encryption, sensing, light-emitting diodes, and biomedicine. Finally, the remaining major challenges for RTP CDs are discussed and new opportunities in the future are proposed.

Photoactivated organic phosphorescence by stereo-hindrance engineering for mimicking synaptic plasticity

Purely organic phosphorescent materials with dynamically tunable optical properties and persistent luminescent characteristics enable more novel applications in intelligent optoelectronics. Herein, we reported a concise and universal strategy to achieve photoactivated ultralong phosphorescence at room temperature through stereo-hindrance engineering. Such dynamically photoactivated phosphorescence behavior was ascribed to the suppression of non-radiative transitions and improvement of spin-orbit coupling (SOC) as the variation of the distorted molecular conformation by the synergistic effect of electrostatic repulsion and steric hindrance. This "trainable" phosphorescent behavior was first proposed to mimic biological synaptic plasticity, especially for unique experience-dependent plasticity, by the manipulation of pulse intensity and numbers. This study not only outlines a principle to design newly dynamic phosphorescent materials, but also broadens their utility in intelligent sensors and robotics.

Recent Advances of Carbon Dots with Afterglow Emission

Carbon dots (CDs) have gradually become a new generation of nano-luminescent materials, which have received extensive attention due to excellent optical properties, wide source of raw materials, low toxicity, and good biocompatibility. In recent years, there are many reports on the luminescent phenomenon of CDs, and great progress has been achieved. However,there are rarely systematic summaries on CDs with persistent luminescence. Here, a summary of the recent progress on persistent luminescent CDs, including luminous mechanism, synthetic strategies, property regulation, and potential applications, is given. First, a brief introduction is given to the development of CDs luminescent materials. Then, the luminous mechanism of afterglow CDs from room temperature phosphorescence (RTP), delayed fluorescence (DF), and long persistent luminescence (LPL) is discussed. Next, the constructed methods of luminescent CDs materials are summarized from two aspects, including matrix-free self-protected and matrix-protected CDs. Moreover, the regulation of afterglow properties from color, lifetime, and efficiency is presented. Afterwards, the potential applications of CDs, such as anti-counterfeiting, information encryption, sensing, bio-imaging, multicolor display, LED devices, etc., are reviewed. Finally, an outlook on the development of CDs materials and applications is proposed.

One-Pot Three Carbon Dots with Various Lifetimes Rooted in Different Decarboxylation Degrees for Matrix-Free, Anti-Oxygen, and Time-Resolved Information Encryption and Cellular Imaging

Activating long-lived room temperature phosphorescence (RTP) in the aqueous environment and thus realizing matrix-free, anti-oxygen, and time-resolved information encryption and cellular imaging remain a great challenge. Here, we fabricated three types of carbon dots (C-dots), i.e., fluorescent C-dots (F-C-dots) and two types of phosphorescent C-dots denoted as Pw-C-dots and Py-C-dots by a one-pot strategy. Their formation was attributed to the difference in the decarboxylation degree at high temperatures using trimesic acid (TMA) as a sole precursor. Unexpectedly, the yield reached as high as ∼92%, and the proportions were ∼27% for F-C-dots, ∼17% for Pw-C-dots, and ∼56% for Py-C-dots. These nanomaterials could help implement carbon peaking and carbon neutrality. Both green RTP of the two C-dots resulted from the small energy gap (ΔEST). These two RTP C-dots had a long lifetime of over 270 ms with a relatively high quantum yield (4.5 and 6.2%). They exhibited excellent photostability and anti-photobleaching performances. The dry and wet powders of the RTP C-dots were applied to high-level information encryption. The lifelike patterns were greatly different from those of the original ones and could last for several seconds to the naked eye, demonstrating that the RTP C-dots could be potentially employed as anti-oxygen and time-resolved contrast reagents. Most significantly, the cellular imaging experiments showed that the biofriendly PVP-coated Py-C-dots could localize at lysosomes and sustain hundreds of milliseconds. This approach not only pioneers a time-resolved lysosome localization model but also opens up a promising door for anti-oxygen and time-resolved RTP cytoimaging.

Long-Lived Dynamic Room Temperature Phosphorescence from Carbon Dots Based Materials

As a type of room temperature phosphorescence (RTP) material, carbon dots (CDs) always show short lifetime and low phosphorescence efficiency. To counter these disadvantages, several strategies, such as embedding in rigid matrix, introducing of heteroatom, crosslink-enhanced emission, etc., are well developed. Consequently, lots of CDs-based RTP materials are obtained. Doping of CDs into various matrix is the dominant method for preparation of long-lived CDs-based RTP materials so far. The desired CDs@matrix composites always display outstanding RTP performances. Meanwhile, matrix-free CDs and carbonized polymer dots-based RTP materials are also widely developed. Amounts of CDs possessing ultra-long lived, multiple colored, and dynamic RTP emission are successfully obtained. Herein, the recent progress achieved in CDs-based RTP materials as well as the corresponding efficient strategies and emission mechanisms are summarized and reviewed in detail. Due to CDs-based RTP materials possess excellent chemical stability, photostability and low biological toxicity, they exhibit great application potential in the fields of anti-counterfeiting, data encryption, and biological monitoring. The application of the CDs-based RTP materials is also introduced in this review. As a promising functional material, development of long wavelength RTP emitting CDs with long lifetime is still challengeable, especially for the red and near-infrared emitting RTP materials.