Thermally-actuated microfluidic membrane valve for point-of-care applications

Open and closed microfluidics for biosensing

Biosensing is vital for many areas like disease diagnosis, infectious disease prevention, and point-of-care monitoring. Microfluidics has been evidenced to be a powerful tool for biosensing via integrating biological detection processes into a palm-size chip. Based on the chip structure, microfluidics has two subdivision types: open microfluidics and closed microfluidics, whose operation methods would be diverse. In this review, we summarize fundamentals, liquid control methods, and applications of open and closed microfluidics separately, point out the bottlenecks, and propose potential directions of microfluidics-based biosensing.

Neuropathogenesis-on-chips for neurodegenerative diseases

Developing diagnostics and treatments for neurodegenerative diseases (NDs) is challenging due to multifactorial pathogenesis that progresses gradually. Advanced in vitro systems that recapitulate patient-like pathophysiology are emerging as alternatives to conventional animal-based models. In this review, we explore the interconnected pathogenic features of different types of ND, discuss the general strategy to modelling NDs using a microfluidic chip, and introduce the organoid-on-a-chip as the next advanced relevant model. Lastly, we overview how these models are being applied in academic and industrial drug development. The integration of microfluidic chips, stem cells, and biotechnological devices promises to provide valuable insights for biomedical research and developing diagnostic and therapeutic solutions for NDs.

An embedded microfluidic valve for dynamic control of cellular communication

The communication between different cell populations is an important aspect of many natural phenomena that can be studied with microfluidics. Using microfluidic valves, these complex interactions can be studied with a higher level of control by placing a valve between physically separated populations. However, most current valve designs do not display the properties necessary for this type of system, such as providing variable flow rate when embedded inside a microfluidic device. While some valves have been shown to have such tunable behavior, they have not been used for dynamic, real-time outputs. We present an electric solenoid valve that can be fabricated completely outside of a cleanroom and placed into any microfluidic device to offer control of dynamic fluid flow rates and profiles. After characterizing the behavior of this valve under controlled test conditions, we developed a regression model to determine the required input electrical signal to provide the solenoid the ability to create a desired flow profile. With this model, we demonstrated that the valve could be controlled to replicate a desired, time-varying pattern for the interface position of a co-laminar fluid stream. Our approach can be performed by other investigators with their microfluidic devices to produce predictable, dynamic fluidic behavior. In addition to modulating fluid flows, this work will be impactful for controlling cellular communication between distinct populations or even chemical reactions occurring in microfluidic channels.

3D free-assembly modular microfluidics inspired by movable type printing

Reconfigurable modular microfluidics presents an opportunity for flexibly constructing prototypes of advanced microfluidic systems. Nevertheless, the strategy of directly integrating modules cannot easily fulfill the requirements of common applications, e.g., the incorporation of materials with biochemical compatibility and optical transparency and the execution of small batch production of disposable chips for laboratory trials and initial tests. Here, we propose a manufacturing scheme inspired by the movable type printing technique to realize 3D free-assembly modular microfluidics. Double-layer 3D microfluidic structures can be produced by replicating the assembled molds. A library of modularized molds is presented for flow control, droplet generation and manipulation and cell trapping and coculture. In addition, a variety of modularized attachments, including valves, light sources and microscopic cameras, have been developed with the capability to be mounted onto chips on demand. Microfluidic systems, including those for concentration gradient generation, droplet-based microfluidics, cell trapping and drug screening, are demonstrated. This scheme enables rapid prototyping of microfluidic systems and construction of on-chip research platforms, with the intent of achieving high efficiency of proof-of-concept tests and small batch manufacturing.

Strain-induced self-rolled-up microtubes for multifunctional on-chip microfluidic applications

On-chip microfluidics are characterized as miniaturized devices that can be either integrated with other components on-chip or can individually serve as a standalone lab-on-a-chip system for a variety of applications ranging from biochemical sensing to macromolecular manipulation. Heterogenous integration with various materials and form factors is, therefore, key to enhancing the performance of such microfluidic systems. The fabrication of complex three-dimensional (3D) microfluidic components that can be easily integrated with other material systems and existing state-of-the-art microfluidics is of rising importance. Research on producing self-assembled 3D architectures by the emerging self-rolled-up membrane (S-RuM) technology may hold the key to such integration. S-RuM technology relies on a strain-induced deformation mechanism to spontaneously transform stacked thin-film materials into 3D cylindrical hollow structures virtually on any kind of substrate. Besides serving as a compact microfluidic chamber, the S-RuM-based on-chip microtubular architecture exhibits several other advantages for microfluidic applications including customizable geometry, biocompatibility, chemical stability, ease of integration, uniform field distributions, and increased surface area to volume ratio. In this Review, we will highlight some of the applications related to molecule/particle sensing, particle delivery, and manipulation that utilized S-RuM technology to their advantage.

Passive Automatic Switch Relying on Laplace Pressure for Efficient Underwater Low-Gas-Flux Bubble Energy Harvesting

The buoyancy potential energy contained in bubbles released by subsea geological and biological activities represents a possible in situ energy source for underwater sensing and detection equipment. However, the low gas flux of the bubble seepages that exist widely on the seabed introduces severe challenges. Herein, a passive automatic switch relying on Laplace pressure is proposed for efficient energy harvesting from low-gas-flux bubbles. This switch has no moving mechanical parts; it uses the Laplace-pressure difference across a curved gas-liquid interface in a biconical channel as an invisible "microvalve". If there is mechanical equilibrium between the Laplace-pressure difference and the liquid-pressure difference, the microvalve will remain closed and prevent the release of bubbles as they continue to accumulate. After the accumulated gas reaches a threshold value, the microvalve will open automatically, and the gas will be released rapidly, relying on the positive feedback of interface mechanics. Using this device, the gas buoyancy potential energy entering the energy harvesting system per unit time can be increased by a factor of more than 30. Compared with a traditional bubble energy harvesting system without a switch, this system achieves a 19.55-fold increase in output power and a 5.16-fold enhancement in electrical energy production. The potential energy of ultralow flow rate bubbles (as low as 3.97 mL/min) is effectively collected. This work provides a new design philosophy for passive automatic-switching control of gas-liquid two-phase fluids, presenting an effective approach for harvesting of buoyancy potential energy from low-gas-flux bubble seepages. This opens a promising avenue for in situ energy supply for subsea scientific observation networks.

Addressable microfluidics technology for non-sacrificial analysis of biomaterial implants in vivo

Tissue regeneration-promoting and drug-eluting biomaterials are commonly implanted into animals as a part of late-stage testing before committing to human trials required by the government. Because the trials are very expensive (e.g., they can cost over a billion U.S. dollars), it is critical for companies to have the best possible characterization of the materials' safety and efficacy before it goes into a human. However, the conventional approaches to biomaterial evaluation necessitate sacrificial analysis (i.e., euthanizing a different animal for measuring each time point and retrieving the implant for histological analysis), due to the inability to monitor how the host tissues respond to the presence of the material in situ. This is expensive, inaccurate, discontinuous, and unethical. In contrast, our manuscript presents a novel microfluidic platform potentially capable of performing non-disruptive fluid manipulations within the spatial constraints of an 8 mm diameter critical calvarial defect-a "gold standard" model for testing engineered bone tissue scaffolds in living animals. In particular, here, addressable microfluidic plumbing is specifically adapted for the in vivo implantation into a simulated rat's skull, and is integrated with a combinatorial multiplexer for a better scaling of many time points and/or biological signal measurements. The collected samples (modeled as food dyes for proof of concept) are then transported, stored, and analyzed ex vivo, which adds previously-unavailable ease and flexibility. Furthermore, care is taken to maintain a fluid equilibrium in the simulated animal's head during the sampling to avoid damage to the host and to the implant. Ultimately, future implantation protocols and technology improvements are envisioned toward the end of the manuscript. Although the bone tissue engineering application was chosen as a proof of concept, with further work, the technology is potentially versatile enough for other in vivo sampling applications. Hence, the successful outcomes of its advancement should benefit companies developing, testing, and producing vaccines and drugs by accelerating the translation of advanced cell culturing tech to the clinical market. Moreover, the nondestructive monitoring of the in vivo environment can lower animal experiment costs and provide data-gathering continuity superior to the conventional destructive analysis. Lastly, the reduction of sacrifices stemming from the use of this technology would make future animal experiments more ethical.

Microvalves for Applications in Centrifugal Microfluidics

Centrifugal microfluidic platforms (CDs) have opened new possibilities for inexpensive point-of-care (POC) diagnostics. They are now widely used in applications requiring polymerase chain reaction steps, blood plasma separation, serial dilutions, and many other diagnostic processes. CD microfluidic devices allow a variety of complex processes to transfer onto the small disc platform that previously were carried out by individual expensive laboratory equipment requiring trained personnel. The portability, ease of operation, integration, and robustness of the CD fluidic platforms requires simple, reliable, and scalable designs to control the flow of fluids. Valves play a vital role in opening/closing of microfluidic channels to enable a precise control of the flow of fluids on a centrifugal platform. Valving systems are also critical in isolating chambers from the rest of a fluidic network at required times, in effectively directing the reagents to the target location, in serial dilutions, and in integration of multiple other processes on a single CD. In this paper, we review the various available fluidic valving systems, discuss their working principles, and evaluate their compatibility with CD fluidic platforms. We categorize the presented valving systems into either "active", "passive", or "hybrid"-based on their actuation mechanism that can be mechanical, thermal, hydrophobic/hydrophilic, solubility-based, phase-change, and others. Important topics such as their actuation mechanism, governing physics, variability of performance, necessary disc spin rate for valve actuation, valve response time, and other parameters are discussed. The applicability of some types of valves for specialized functions such as reagent storage, flow control, and other applications is summarized.

Self-assembled microtubular electrodes for on-chip low-voltage electrophoretic manipulation of charged particles and macromolecules

On-chip manipulation of charged particles using electrophoresis or electroosmosis is widely used for many applications, including optofluidic sensing, bioanalysis and macromolecular data storage. We hereby demonstrate a technique for the capture, localization, and release of charged particles and DNA molecules in an aqueous solution using tubular structures enabled by a strain-induced self-rolled-up nanomembrane (S-RuM) platform. Cuffed-in 3D electrodes that are embedded in cylindrical S-RuM structures and biased by a constant DC voltage are used to provide a uniform electrical field inside the microtubular devices. Efficient charged-particle manipulation is achieved at a bias voltage of <2-4 V, which is ~3 orders of magnitude lower than the required potential in traditional DC electrophoretic devices. Furthermore, Poisson-Boltzmann multiphysics simulation validates the feasibility and advantage of our microtubular charge manipulation devices over planar and other 3D variations of microfluidic devices. This work lays the foundation for on-chip DNA manipulation for data storage applications.