Energy storage behaviors in ferroelectric capacitors fabricated with sub-50 nm poly(vinylidene fluoride) Langmuir–Blodgett nanofilms

Hybrid Core-Shell TiCN@SiO2 Nanoparticles in Percolation-Based Polyvinylidene Fluoride Dielectrics for Improved High-Voltage Capacitive Energy Storage

Solid-state polymer dielectrics offer an exceptional dielectric breakdown, but require an enhanced energy density to be competitive with alternative electrolyte-based energy storage technologies. Therefore, this research introduces conductive titanium carbonitride (TiCN) nanoparticles in a polyvinylidene fluoride (PVDF) matrix to obtain flexible percolation-based nanodielectrics by ultrasonication-based suspension processing and hot pressing. Well-dispersed TiCN nanoparticles in PVDF were obtained for a wide range of filler volume fractions, and an exceptional peak in the dielectric constant equal to 1130 (0.1 Hz) and 29 (10 kHz) was observed near the percolation threshold (9.2 vol %). The enhanced dielectric constant was ascribed to massive interfacial polarization occurring, resulting from Maxwell-Wagner-Sillars (MWS) polarization and a nanocapacitor mechanism that are dominant at low and high frequencies, respectively. An improvement by 30% in the energy density (0.042 Wh kg-1) compared with the neat PVDF matrix was achieved for the PVDF/TiCN nanodielectrics. The first successful uniform deposition of a nanometer-thin (3 nm) silica (SiO2) shell via the Stöber process on TiCN nanoparticles significantly suppressed the dielectric losses near percolation for the PVDF/TiCN@SiO2 nanodielectrics by more than 1 order of magnitude while offering dielectric constants of 34 (0.1 Hz) and 10 (10 kHz). This study demonstrates the potential of hybrid (core-shell) percolation-based dielectrics for an improved capacitive dielectric performance by an integrated dielectric characterization approach that simultaneously optimizes the dielectric constant, loss tangent, breakdown strength, and energy density.

Alignment properties of a ferroelectric nematic liquid crystal on the rubbed substrates

The orientation characteristics of FNLC-919, a new material with a ferroelectric nematic phase at room temperature, were investigated. Its alignment characteristics varied greatly depending on the relative rubbing direction on both substrates of a liquid crystal cell. In a cell where the two substrates were rubbed in the same direction, they were arranged homogeneously along the rubbing direction without domains or defects in the ferroelectric nematic phase. In a cell where the two substrates were rubbed in the anti-parallel direction, the two domains were twisted in the opposite direction. We quantitatively obtained the twisted direction and angle by matching the experimental data and calculation results using Jones matrix calculations. From the electro-optical experiment, it was confirmed that the polarization direction was opposite to the rubbing direction. In addition, the wavelength and temperature dependence of birefringence was measured for FNLC-919. In a cell where the rubbing direction between two substrates was 90°, two domains of opposite directions were observed in the nematic phase. When it becomes a ferroelectric nematic phase on cooling, the twist is determined to be only in one direction. The twist direction and angle were quantitatively obtained in the nematic and ferroelectric nematic phases. It was twisted more in the ferroelectric nematic phase than in the nematic phase.