Mid-infrared dispersive wave generation in gas-filled photonic crystal fibre by transient ionization-driven changes in dispersion

Soliton and dispersive wave generation with third-order dispersion and temporal boundary

We investigate the pulse evolution and energy conservation condition at the temporal boundary under third-order dispersion. When the fundamental soliton crosses the temporal boundary and forms two reflected pulses and one transmitted pulse, the power of the transmitted pulse first increases and then decreases as the incident spectrum shifts toward the blue side. If the transmitted spectrum lies in the anomalous group-velocity dispersion region, second-order soliton is formed and dispersive wave is radiated. We present a modified phase-matching condition to predict the resonance frequencies. The predicted results are in good agreement with the results obtained by numerically solving the nonlinear Schrödinger equation.

Self-compression of femtosecond laser pulses in ambient air through conical radiation

We demonstrate self-compression of 98 fs near-infrared laser pulses down to 8.8 fs in ambient air, utilizing self-phase modulation in air and negative dispersion in the properties of a laser-induced plasma. The blueshifted pulses achieve self-compression through conical radiation, eliminating the need for additional dispersion compensation. The results highlight a simple and compact approach to generate sub-10 fs laser pulses without additional measures for time-resolved applications in ultrafast diagnostics and spectroscopy.

Soliton-sinc optical pulse propagation in the presence of high-order effects

We investigate the propagation dynamics of the soliton-sinc, a kind of novel hybrid pulse, in the presence of higher-order effects with emphasis on the third-order dispersion (TOD) and Raman effects. At variance with the fundamental sech soliton, the traits of the band-limited soliton-sinc pulse can effectively manipulate the radiation process of dispersive waves (DWs) induced by the TOD. The energy enhancement and the radiated frequency tunability strongly depend on the band-limited parameter. A modified phase-matching condition is proposed for predicting the resonant frequency of the DWs emitted by soliton-sinc pulses, which is verified by the numerically calculated results. In addition, Raman-induced frequency shift (RIFS) of the soliton sinc pulse increases exponentially with a decrease of the band-limited parameter. Finally, we further discuss the simultaneous contribution of the Raman and TOD effects to the generation of the DWs emitted from the soliton-sinc pulses. The Raman effect can then either reduce or amplify the radiated DWs depending on the sign of the TOD. These results show that soliton-sinc optical pulses should be relevant for practical applications such as broadband supercontinuum spectra generation as well as nonlinear frequency conversion.

Manipulating dispersive wave emission via temporal sinusoidal phase modulation

We report the dispersive wave (DW) emission from the Gaussian pulse with temporal sinusoidal phase (TSP) modulation. The TSP-induced chirp can enhance or cancel the chirp generated by self-phase modulation by properly selecting the modulation parameters of TSP, which can influence the nonlinear propagation of the TSP-modulated pulse. It is shown that the TSP can effectively control the resonant frequency and energy conversion efficiency of the DW emission. We give a modified phase-matching condition to predict the resonant frequencies, which agree with the simulation results obtained by numerically solving the nonlinear Schrödinger equation. The enhanced conversion efficiency of the DWs can be increased up to 28% with only TSP modulation. Our results can extend the application of temporal phase modulation technology for wavelength conversion, and broadband supercontinuum generation.

Manipulation of dispersive waves emission via quadratic spectral phase

We investigate the process of dispersive waves (DWs) emitted from Gaussian pulse (GP) with an initial quadratic spectral phase (QSP). We show that the radiation of DWs is strongly affected by the QSP parameter. The conversion efficiency and resonant frequency of DWs are effectively enhanced and controlled by tuning the sign and magnitude of the initial QSP. At variance with the case of pure GP, the DWs emission is first advanced and then delayed for negatively QSP modulated GPs; while it is always delayed for positively QSP modulated GPs. We present a modified phase-matching formula that allows us to predict DWs spectral peaks. The resonant frequencies predicted by the phase-matching condition are in very good agreement with the results obtained from the numerical simulation based on the generalized nonlinear Schrödinger equation. The results presented here can be utilized as a effective tool to manipulate DWs emission for applications such as frequency conversion.

Mid-Infrared Ultra-Short Pulse Generation in a Gas-Filled Hollow-Core Photonic Crystal Fiber Pumped by Two-Color Pulses

We show numerically that ultra-short pulses can be generated in the mid-infrared when a gas filled hollow-core fiber is pumped by a fundamental pulse and its second harmonic. The generation process originates from a cascaded nonlinear phenomenon starting from a spectral broadening of the two pulses followed by an induced phase-matched four wave-mixing lying in the mid-infrared combined with a dispersive wave. By selecting this mid-infrared band with a spectral filter, we demonstrate the generation of ultra-short 60 fs pulses at a 3–4 µm band and a pulse duration of 20 fs can be reached with an additional phase compensator.

Manipulation of infrared dispersive waves in customized microstructured optical fibers for 1.7 and 2.0 µm light sources

We demonstrate the controllable generation of infrared dispersive waves (DWs) from customized, in-house fabricated silica microstructured optical fibers (MOFs) by manipulating the location of zero dispersion wavelength (ZDW) through the structure of the fibers. The highly enriched shaping mechanism of arrested soliton in the MOFs with two ZDWs provides a technique for efficient energy transfer into the targeted eye-safe wavelengths at 1.7 and 2.0 µm by the virtue of DW formation.

Sub-half-cycle field transients from shock-wave-assisted soliton self-compression

We identify an unusual regime of ultrafast nonlinear dynamics in which an optical shock wave couples to soliton self-compression, steepening the tail of the pulse, thus yielding self-compressing soliton transients as short as the field sub-half-cycle. We demonstrate that this extreme pulse self-compression scenario can help generate sub-half-cycle mid-infrared pulses in a broad class of anomalously dispersive optical waveguide systems.

Sandwiched graphene/hBN/graphene photonic crystal fibers with high electro-optical modulation depth and speed

Graphene-photonic crystal fibers (PCFs) are obtained by integrating the broadband optical response and electro-optic tunability of graphene with the high-quality waveguide capacity and easy-integrability of the PCF, and this has been proven to be an important step towards multimaterial multifunctional fiber and all-fiber integrated circuits. However, the reported electro-optic modulator based on directly-grown graphene-PCF suffers from very low response speed (below 100 Hz) due to the slow response of ionic liquid. Here, we propose new functional PCFs with a sandwiched graphene/hBN/graphene (Gr/hBN/Gr) film attached to the hole walls of the fibers, and theoretically demonstrate that the in-line modulator based on it can achieve simultaneous single-mode transmission ranging from 1260 nm to 1700 nm (covering all optical communication bands), significant modulation depth (e.g. ∼42 dB mm-1 at 1550 nm) and high modulation speed (up to ∼0.1 GHz). Furthermore, various device functions can be designed by changing the structure of the fiber, including the length, the hole diameter and the layer numbers of graphene and hBN films. This proposed approach directs a viable path to obtain high-performance all-fiber devices based on hybrid two-dimensional material optical fibers.

Photoionization-assisted, high-efficiency emission of a dispersive wave in gas-filled hollow-core photonic crystal fibers

We demonstrate that the phase-matched dispersive wave (DW) emission within the resonance band of a 25-cm-long gas-filled hollow-core photonic crystal fiber (HC-PCF) can be strongly enhanced by the photoionization effect of the pump pulse. In the experiments, we observe that as the pulse energy increases, the pump pulse gradually shifts to shorter wavelengths due to soliton-plasma interactions. When the central wavelength of the blueshifting soliton is close to the resonance band of the HC-PCF, high-efficiency energy transfer from the pump light to the DW in the visible region can be obtained. During this DW emission process, we observe that the spectral center of the DW gradually shifts to longer wavelengths leading to a slightly increased DW bandwidth, which can be well explained as the consequence of phase-matched coupling between the pump pulse and the DW. In particular, at an input pulse energy of 6 µJ, the spectral ratio of the DW at the fiber output is measured to be as high as ∼53%, corresponding to an overall conversion efficiency of ∼19%. These experimental results, well accompanied by theoretical simulations and analysis, offer a practical and effective method of generating high-efficiency tunable visible light sources and provide a few useful insights into the fields of soliton-plasma interaction and resonance-induced DW emission.

Efficient single-cycle pulse compression of an ytterbium fiber laser at 10 MHz repetition rate

Over the past years, ultrafast lasers with average powers in the 100 W range have become a mature technology, with a multitude of applications in science and technology. Nonlinear temporal compression of these lasers to few- or even single-cycle duration is often essential, yet still hard to achieve, in particular at high repetition rates. Here we report a two-stage system for compressing pulses from a 1030 nm ytterbium fiber laser to single-cycle durations with 5 µJ output pulse energy at 9.6 MHz repetition rate. In the first stage, the laser pulses are compressed from 340 to 25 fs by spectral broadening in a krypton-filled single-ring photonic crystal fiber (SR-PCF), subsequent phase compensation being achieved with chirped mirrors. In the second stage, the pulses are further compressed to single-cycle duration by soliton-effect self-compression in a neon-filled SR-PCF. We estimate a pulse duration of ∼3.4 fs at the fiber output by numerically back-propagating the measured pulses. Finally, we directly measured a pulse duration of 3.8 fs (1.25 optical cycles) after compensating (using chirped mirrors) the dispersion introduced by the optical elements after the fiber, more than 50% of the total pulse energy being in the main peak. The system can produce compressed pulses with peak powers >0.6 GW and a total transmission exceeding 66%.

Noise and spectral stability of deep-UV gas-filled fiber-based supercontinuum sources driven by ultrafast mid-IR pulses

Deep-UV (DUV) supercontinuum (SC) sources based on gas-filled hollow-core fibers constitute perhaps the most viable solution towards ultrafast, compact, and tunable lasers in the UV spectral region, which can even also extend into the mid-infrared (IR). Noise and spectral stability of such broadband sources are key parameters that define their true potential and suitability towards real-world applications. In order to investigate the spectral stability and noise levels in these fiber-based DUV sources, we generate an SC spectrum that extends from 180 nm (through phase-matched dispersive waves - DWs) to 4 μm by pumping an argon-filled hollow-core anti-resonant fiber at a mid-IR wavelength of 2.45 μm. We characterize the long-term stability of the source over several days and the pulse-to-pulse relative intensity noise (RIN) of the DW at 275 nm. The results indicate no sign of spectral degradation over 110 hours, but the RIN of the DW pulses at 275 nm is found to be as high as 33.3%. Numerical simulations were carried out to investigate the spectral distribution of the RIN and the results confirm the experimental measurements and that the poor noise performance is due to the high RIN of the mid-IR pump laser, which was hitherto not considered in numerical modelling of these sources. The results presented herein provide an important step towards an understanding of the noise mechanism underlying such complex light-gas nonlinear interactions and demonstrate the need for pump laser stabilization.

Ionization-induced adiabatic soliton compression in gas-filled hollow-core photonic crystal fibers

We investigate in the experiments the ionization-induced adiabatic soliton compression process in a short length of He-filled single-ring photonic crystal fiber. We observe that the plasma-driven blueshifting solitons show little residual light near the pump wavelength in a certain pulse energy region, leading to a high-efficiency frequency upconversion process. In contrast, at high pulse energy levels, we observe that the quality of the frequency upshifting process is impaired due to the existence of a dynamical loss channel induced by the coupling of the soliton to linear modes near the pump wavelength. In addition, through adjusting the input pulse energy, the central wavelength of blueshifting solitons can be continuously tuned over 300 nm. These experimental results, confirmed by numerical simulations, not only offer a deep insight into ionization-induced soliton-plasma dynamics in gas-filled hollow-core photonic crystal fibers, but also develop highly tunable ultrafast light sources at visible wavelengths, which may have many applications in ultrafast spectroscopy.

Integration of black phosphorus and hollow-core anti-resonant fiber enables two-order magnitude enhancement of sensitivity for bisphenol A detection

Hollow core anti-resonant fiber (HARF) has found a handful applications in optical communications, nonlinear optics and high power delivery. The intrinsic property of the fiber also renders it an ideal candidate for biosensing, which has not been explored intensively. Herein, we demonstrate an optical fiber sensing platform, taking advantages of the state-of-the-art HARF technology and superior physicochemical properties of 2D material black phosphorus, for ultra-sensitive detection of bisphenol A (BPA) in blood and environmental samples. The specially designed HARF can not only achieve broadband transmission of light, but also confine light in the low refractive-index liquid core, ensuring maximum overlap of light and liquid core. Modification of the inner surface of HARF with 2D black phosphorus nanoflakes functionalized with fluorescently labeled BPA-specific aptamer provides a smart sensing interface enabling highly selective detection of BPA via measuring the fluorescence. The limit of detection is 1.69pM, which is more than two orders of magnitude enhancement compared to the conventional plate assay. The proposed assay is not interfered with the BPA analogues BPB and BPS. The long optical path with tight optical confinement greatly enhances the analyte-light interaction and improves the sensitivity of the sensing platform. The proposed sensing platform can be further developed for versatile applications.

Nested capillary anti-resonant silica fiber with mid-infrared transmission and low bending sensitivity at 4000 nm

We report a silica glass nested capillary anti-resonant nodeless fiber with transmission and low bending sensitivity in the mid-infrared around 4000 nm. The fiber is characterized in terms of transmission over 1700-4200 nm wavelengths, revealing a mid-infrared 3500-4200 nm transmission window, clearly observable for a 12 m long fiber. Bending loss around 4000 nm is 0.5 dB/m measured over three full turns with 40 mm radius, going up to 5 dB/m for full turns with 15 mm radius. Our results provide experimental evidence of hollow-core silica fibers in which nested, anti-resonant capillaries provide high bend resistance in the mid-infrared. This is obtained for a fiber with a large core diameter of over 60 μm relative to around 30 μm capillaries in the cladding, which motivates its application in gas fiber lasers or fiber-based mid-infrared spectroscopy of CO_x or N_xO analytes.

Continuously wavelength-tunable blueshifting soliton generated in gas-filled photonic crystal fibers

We experimentally report the generation of wavelength-tunable blueshifting soliton in the visible spectral region through a gas-filled single-ring photonic crystal fiber (SR-PCF). In particular, in a He-filled SR-PCF, we observed a sharp narrow-band spectral peak at the first resonant spectral region of the SR-PCF, which results from phase-matched nonlinear processes. To the best of our knowledge, this is the first time investigating the influence of the core-cladding resonance on the blueshifting soliton. In addition, when Ar gas was filled into the SR-PCF, some interference fringes on the blueshifting soliton were observed at high pulse-energy levels due to plasma-induced pulse fission. These two experimental observations are confirmed by numerical simulations. Furthermore, through properly adjusting input pulse energy, we found that the blueshifting soliton can obtain a high conversion efficiency (∼84%) and its wavelength can be tuned over hundreds of nanometers (∼240  nm).

Deep-UV to Mid-IR Supercontinuum Generation driven by Mid-IR Ultrashort Pulses in a Gas-filled Hollow-core Fiber

Supercontinuum (SC) generation based on ultrashort pulse compression constitutes one of the most promising technologies towards ultra-wide bandwidth, high-brightness, and spatially coherent light sources for applications such as spectroscopy and microscopy. Here, multi-octave SC generation in a gas-filled hollow-core antiresonant fiber (HC-ARF) is reported spanning from 200 nm in the deep ultraviolet (DUV) to 4000 nm in the mid-infrared (mid-IR) having an output energy of 5 μJ. This was obtained by pumping at the center wavelength of the first anti-resonant transmission window (2460 nm) with ~100 fs pulses and an injected pulse energy of ~8 μJ. The mechanism behind the extreme spectral broadening relies upon intense soliton-plasma nonlinear dynamics which leads to efficient soliton self-compression and phase-matched dispersive wave (DW) emission in the DUV region. The strongest DW is observed at 275 nm which corresponds to the calculated phase-matching wavelength of the pump. Furthermore, the effect of changing the pump pulse energy and gas pressure on the nonlinear dynamics and their direct impact on SC generation was investigated. This work represents another step towards gas-filled fiber-based coherent sources, which is set to have a major impact on applications spanning from DUV to mid-IR.

Hollow-Core Fiber Technology: The Rising of “Gas Photonics”

Since their inception, about 20 years ago, hollow-core photonic crystal fiber and its gas-filled form are now establishing themselves both as a platform in advancing our knowledge on how light is confined and guided in microstructured dielectric optical waveguides, and a remarkable enabler in a large and diverse range of fields. The latter spans from nonlinear and coherent optics, atom optics and laser metrology, quantum information to high optical field physics and plasma physics. Here, we give a historical account of the major seminal works, we review the physics principles underlying the different optical guidance mechanisms that have emerged and how they have been used as design tools to set the current state-of-the-art in the transmission performance of such fibers. In a second part of this review, we give a nonexhaustive, yet representative, list of the different applications where gas-filled hollow-core photonic crystal fiber played a transformative role, and how the achieved results are leading to the emergence of a new field, which could be coined “Gas photonics”. We particularly stress on the synergetic interplay between glass, gas, and light in founding this new fiber science and technology.

Wavelength-tunable few-cycle pulses in visible region generated through soliton-plasma interactions

We numerically investigate the generation of wavelength-tunable few-cycle pulses in the visible spectral region through soliton-plasma interactions. We found that in a He-filled single-ring photonic crystal fiber (SR-PCF), soliton-plasma interactions could shift the optical spectra of pulses propagating in the fiber to shorter wavelengths. Through adjusting the single pulse energy launched into the fiber, the central wavelength of these blueshifting pulses could be continuously tuned over hundreds of nanometers, while maintaining a high energy conversion efficiency of >57%. Moreover, we observed that during the nonlinear pulse propagation in the SR-PCF, soliton self-compression effects enhanced the plasma density in the fiber at high pulse energies, which could modulate the phase-matching condition of ultraviolet (UV) dispersive wave (DW) generation. Furthermore, we employed the recently-developed model to study numerically the loss and dispersion of the SR-PCF in its resonant and anti-resonant spectral regions, and demonstrated the remarkable influence of the core-cladding resonance on the process of soliton-plasma interactions. The numerical results demonstrated here pave the way to develop wavelength-tunable, few-cycle light sources in the visible region, which may have considerable application potential in pump-probe spectroscopy and strong-field physics.

Multi-stage generation of extreme ultraviolet dispersive waves by tapering gas-filled hollow-core anti-resonant fibers

In this work, we numerically investigate an experimentally feasible design of a tapered Ne-filled hollow-core anti-resonant fiber and we report multi-stage generation of dispersive waves (DWs) in the range 90-120 nm, well into the extreme ultraviolet (UV) region. The simulations assume a 800 nm pump pulse with 30 fs 10 µJ pulse energy, launched into a 9 bar Ne-filled fiber with a 34 µm initial core diameter that is then tapered to a 10 µm core diameter. The simulations were performed using a new model that provides a realistic description of both loss and dispersion of the resonant and anti-resonant spectral bands of the fiber, and also importantly includes the material loss of silica in the UV. We show that by first generating solitons that emit DWs in the far-UV region in the pre-taper section, optimization of the following taper structure can allow re-collision with the solitons and further up-conversion of the far-UV DWs to the extreme-UV with energies up to 190 nJ in the 90-120 nm range. This process provides a new way to generate light in the extreme-UV spectral range using relatively low gas pressure.