Giant thermal expansion and α-precipitation pathways in Ti-alloys

A self-referenced interferometer for in situ cryogenic wafer curvature measurements

A self-referenced interferometer to measure time-varying curvature in mechanically unstable environments is needed in many applications. One application that demands this measurement technique with fast data acquisition, 2D sensitivity, and insensitivity to vibration is the measurement of thermal strain in thin films in operational environments. The diverging beam interferometer described here demonstrates an angular sensitivity to the local curvature using interferograms captured by a CMOS camera. Two-dimensional Fourier analysis is used to extract curvature changes. The interferometer demonstrates an experimental sensitivity to curvature changes on the order of 10-4 m-1 and is used to measure thermal stresses in a cryogenic environment of a polycrystalline titanium nitride thin film on a silicon wafer that exhibits anisotropic curvature.

Interplanar Ferromagnetism Enhanced Ultrawide Zero Thermal Expansion in Kagome Cubic Intermetallic (Zr,Nb)Fe2

A cubic metal exhibiting zero thermal expansion (ZTE) over a wide temperature window demonstrates significant applications in a broad range of advanced technologies but is extremely rare in nature. Here, enabled by high-temperature synthesis, we realize tunable thermal expansion via magnetic doping in the class of kagome cubic (Fd-3m) intermetallic (Zr,Nb)Fe2. A remarkably isotropic ZTE is achieved with a negligible coefficient of thermal expansion (+0.47 × 10-6 K-1) from 4 to 425 K, almost wider than most ZTE in metals available. A combined in situ magnetization, neutron powder diffraction, and hyperfine Mössbauer spectrum analysis reveals that interplanar ferromagnetic ordering contributes to a large magnetic compensation for normal lattice contraction upon cooling. Trace Fe-doping introduces extra magnetic exchange interactions that distinctly enhance the ferromagnetism and magnetic ordering temperature, thus engendering such an ultrawide ZTE. This work presents a promising ZTE in kagome metallic materials.

Hierarchical nano-martensite-engineered a low-cost ultra-strong and ductile titanium alloy

Due to the low thermal stability of crystallographic boundaries, the grain boundary engineering (GBE) manifests some limits to the fineness and types of microstructures achievable, while unique chemical boundary engineering (CBE) enables us to create a metallic material with an ultrafine hierarchically heterogeneous microstructure for enhancing the mechanical properties of materials. Here, using a low cost metastable Ti-2.8Cr-4.5Zr-5.2Al (wt.%) alloy as a model material, we create a high density of chemical boundaries (CBs) through the significant diffusion mismatch between Cr and Al alloying elements to architecture hierarchical nano-martensites with an average thickness of ~20 nm. For this metastable titanium alloy, the significantly enhanced yield strength originates from dense nano-martensitic interface strengthening, meanwhile the large ductility is attributed to the multi-stage strain hardening of hierarchical 3D α'/β lamellae assisted by equiaxed primary α (α_p) nodules. The hierarchical nano-martensite engineering strategy confers our alloy a desired combination of strength and ductility, which can potentially be applied to many transformable alloys, and reveal a new target in microstructural design for ultrastrong-yet-ductile structural materials.

It is challenging to obtain Ti alloys with ultrafine microstructure owing to the low thermal stability of crystallographic boundaries. Here the authors demonstrate a chemical boundary-based strategy to produce a hierarchical Ti alloy with nano-martensites that has excellent strength and ductility.

A first-principles investigation of the linear thermal expansion coefficients of BeF2: giant thermal expansion

A first-principles investigation of the linear thermal expansion coefficients of BeF2.

Boosting Photoacoustic Effect via Intramolecular Motions Amplifying Thermal-to-Acoustic Conversion Efficiency for Adaptive Image-Guided Cancer Surgery

Photoacoustic (PA) imaging emerges as a promising technique for biomedical applications. The development of new strategies to boost PA conversion without depressing other properties (e.g., fluorescence) is highly desirable for multifunctional imaging but difficult to realize. Here, we report a new phenomenon that active intramolecular motions could promote PA signal by specifically increasing thermal-to-acoustic conversion efficiency. The compound with intense intramolecular motion exhibits amplified PA signal by elevating thermal-to-acoustic conversion, and the fluorescence also increases due to aggregation-induced emission signature. The simultaneously high PA and fluorescence brightness of TPA-TQ3 NPs enable precise image-guided surgery. The preoperative fluorescence and PA imaging are capable of locating orthotopic breast tumor in a high-contrast manner, and the intraoperative fluorescence imaging delineates tiny residual tumors. This study highlights a new design guideline of intramolecular motion amplifying PA effect.

Routes to control diffusive pathways and thermal expansion in Ti-alloys

β-stabilized Ti-alloys present several unexplored and intriguing surprises in relation to orthorhombic α″ phases. Among them are (i) the diffusion-controlled formation of transitional α″_iso, α″_lean and α″_rich phases and ii) the highly anisotropic thermal expansion of martensitic α″. Using the prototypical Ti-Nb system, we demonstrate that the thermodynamic energy landscape reveals formation pathways for the diffusional forms of α″ and may lead to a stable β-phase miscibility gap. In this way, we derive temperature-composition criteria for the occurrence of α″_iso and resolve reaction sequences during thermal cycling. Moreover, we show that the thermal expansion anisotropy of martensitic α″ gives rise to directions of zero thermal strain depending on Nb content. Utilizing this knowledge, we propose processing routes to achieve null linear expansion in α″ containing Ti-alloys. These concepts are expected to be transferable to other Ti-alloys and offer new avenues for their tailoring and technological exploitation.