Optical magnetism in planar metamaterial heterostructures

On the Study of Advanced Nanostructured Semiconductor-Based Metamaterial

Tunable metamaterials belonging to the class of different reconfigurable optical devices have proved to be an excellent candidate for dynamic and efficient light control. However, due to the consistent optical response of metals, there are some limitations aiming to directly engineer electromagnetic resonances of widespread metal-based composites. The former is accomplished by altering the features or structures of substrates around the resonant unit cells only. In this regard, the adjusting of metallic composites has considerably weak performance. Herein, we make a step forward by providing deep insight into a direct tuning approach for semiconductor-based composites. The resonance behavior of their properties can be dramatically affected by manipulating the distribution of free carriers in unit cells under an applied voltage. The mentioned approach has been demonstrated in the case of semiconductor metamaterials by comparing the enhanced propagation of surface plasmon polaritons with a conventional semiconductor/air case. Theoretically, the presented approach provides a fertile ground to simplify the configuration of engineerable composites and provides a fertile ground for applications in ultrathin, linearly tunable, and on-chip integrated optical components. These include reconfigurable ultrathin lenses, nanoscale spatial light modulators, and optical cavities with switchable resonance modes.

Observation of optical gyromagnetic properties in a magneto-plasmonic metamaterial

Metamaterials with artificial optical properties have attracted significant research interest. In particular, artificial magnetic resonances with non-unity permeability tensor at optical frequencies in metamaterials have been reported. However, only non-unity diagonal elements of the permeability tensor have been demonstrated to date. A gyromagnetic permeability tensor with non-zero off-diagonal elements has not been observed at the optical frequencies. Here we report the observation of gyromagnetic properties in the near-infrared wavelength range in a magneto-plasmonic metamaterial. The non-zero off-diagonal permeability tensor element causes the transverse magneto-optical Kerr effect under s-polarized incidence that otherwise vanishes if the permeability tensor is not gyromagnetic. By retrieving the permeability tensor elements from reflection, transmission, and transverse magneto-optical Kerr effect spectra, we show that the effective off-diagonal permeability tensor elements reach 10⁻³ level at the resonance wavelength (~900 nm) of the split-ring resonators, which is at least two orders of magnitude higher than magneto-optical materials at the same wavelength. The artificial gyromagnetic permeability is attributed to the change in the local electric field direction modulated by the split-ring resonators. Our study demonstrates the possibility of engineering the permeability and permittivity tensors in metamaterials at arbitrary frequencies, thereby promising a variety of applications of next-generation nonreciprocal photonic devices, magneto-plasmonic sensors, and active metamaterials.

Optical gyromagnetic properties are not observed in natural or metamaterials to date. Here, the authors experimentally demonstrated optical gyromagnetic properties in a magneto-plasmonic metamaterial, realizing the long-sought bi-gyrotropic medium.

Asymmetric Nanofractures Determined the Nonreciprocal Peeling for Self-Aligned Heterostructure Nanogaps and Devices

Planar heterostructures composed of two or more adjacent structures with different materials are a kind of building blocks for various applications in surface plasmon resonance sensors, rectifiers, photovoltaic devices, and ambipolar devices, but their reliable fabrication with controllable shape, size, and positioning accuracy remains challenging. In this work, we propose a concept for fabricating planar heterostructures via directional stripping and controlled nanofractures of metallic films, with which self-aligned, multimaterial, multiscale heterostructures with arbitrary geometries and sub-20 nm gaps can be obtained. By using a split ring as the template, the asymmetric nanofracture of the deposited film at the split position results in nonreciprocal peeling of the film in the split ring. Compared to the conventional processes, the final heterostructures are defined only by their outlines, thus providing the ability to fabricate complex heterostructures with higher resolutions. We demonstrate that this method can be used to fabricate heterodimers, multimaterial oligomers, and multiscale asymmetrical electrodes. An Ag-MoS₂-Au photodiode with a strong rectification effect is fabricated based on the nanogap heterostructures prepared by this method. This technology provides a unique and reliable approach to define nanogap heterostructures, which are supposed to have potential applications in nanoelectronics, nanoplasmonics, nano-optoelectronics, and electrochemistry.

A Review on Metamaterials for Device Applications

Metamaterials are the major type of artificially engineered materials which exhibit naturally unobtainable properties according to how their microarchitectures are engineered. Owing to their unique and controllable effective properties, including electric permittivity and magnetic permeability, the metamaterials play a vital role in the development of meta-devices. Therefore, the recent research has mainly focused on shifting towards achieving tunable, switchable, nonlinear, and sensing functionalities. In this review, we summarize the recent progress in terahertz, microwave electromagnetic, and photonic metamaterials, and their applications. The review also encompasses the role of metamaterials in the advancement of microwave sensors, photonic devices, antennas, energy harvesting, and superconducting quantum interference devices (SQUIDs).

Ultrafast and low power all-optical switching in the mid-infrared region based on nonlinear highly doped semiconductor hyperbolic metamaterials

Guided wave modes in the uniaxial anisotropic hyperbolic metamaterials (HMMs) based on highly doped semiconductor instead of metal in the mid-infrared region are investigated theoretically. The heavily doped semiconductor is used to overcome the restrictions of the conventional metal-based structures caused by the lake of tunability and high metal loss at mid-infrared wavelengths. The unit cells of our proposed metamaterial are composed of alternating layers of undoped InAs as a dielectric layer and highly doped InAs as a metal layer. We numerically study the linear and nonlinear behavior of such multilayer metamaterials, for different arrangements of layers in the parallel (vertical HMM) and perpendicular (horizontal HMM) to the input wave vector. The effect of doping concentration, metal to dielectric thickness ratio in the unit cell (fill-fraction), and the total thickness of structure on the guided modes and transmission/reflection spectra of the metamaterials are studied. Moreover, the charge redistribution due to band-bending in the alternating doped and undoped layers of InAs is considered in our simulations. We demonstrate that the guided modes of the proposed hyperbolic metamaterial can change by increasing the intensity of the incident lightwave and entering the nonlinear regime. Therefore, the transition from linear to the nonlinear region leads to high-performance optical bistability. Furthermore, the switching performance in the vertical and horizontal HMMs are inspected and an ultrafast, low power, and high extinction ratio all-optical switch is presented based on a vertical structure of nonlinear highly doped semiconductor hyperbolic metamaterials.

Magnetic wire: transverse magnetism in a one-dimensional plasmonic system

We experimentally demonstrate magnetic wire in a coupled, cut-wire pair-based metasurface operating at the terahertz frequencies. A dominant transverse magnetic dipole (non-axial circulating conduction current) is excited in one of the plasmonic wires that constitute the coupled system, whereas the other wire remains electric. Despite having large asymmetry-induced strong radiation channels in such a metasurface, non-radiative current distributions are obtained as a direct consequence of interaction between the electric and magnetic wire(s). We demonstrate a versatile platform to transform an electric to a magnetic wire and vice-versa through asymmetry-induced polymorphic hybridization with potential applications in photonic/electrical integrated circuits.

Various electromagnetic modes of nondissipative anisotropic metamaterial

Interaction of light and matter can be controlled and manipulated by exploiting the properties of the isofrequency contours (IFCs) of a material. IFC in metamaterial/artificial anisotropic materials can be open and/or closed. The class of metamaterials with open IFC are known as hyperbolic metamaterials (HMMs)/indefinite media. HMMs support large wavevectors, which can lead to some important consequences, such as energy transfer (long range), metacavity lasers (subwavelength scale), sensors (high sensitivity), and hyperlenses (surpassing diffraction limit). Therefore, in this paper wavevector planes for media with open and closed IFCs are investigated with an aim to further differentiate them into regions supporting distinct electromagnetic modes, orientation of power, wavevector, and positive-negative phase velocities.

Direct-tuning methods for semiconductor metamaterials

Among various tunable optical devices, tunable metamaterials have exhibited their excellent ability to dynamically manipulate lights in an efficient manner. However, for unchangeable optical properties of metals, electromagnetic resonances of popular metallic metamaterials are usually tuned indirectly by varying the properties or structures of substrates around the resonant unit cells, and the tuning of metallic metamaterials has significantly low efficiency. In this paper, a direct-tuning method for semiconductor metamaterials is proposed. The resonance strength and resonance frequencies of the metamaterials can be significantly tuned by controlling free carriers’ distributions in unit cells under an applied voltage. This direct-tuning method has been verified in both two-dimensional and three-dimensional semiconductor metamaterials. In principle, the method allows for simplifying the structure of tunable metamaterials and opens the path to applications in ultrathin, linearly-tunable, and on-chip integrated optical components (e.g., tunable ultrathin lenses, nanoscale spatial light modulators and optical cavities with resonance modes switchable).

Homogenization of plasmonic crystals: seeking the epsilon-near-zero effect

By using an asymptotic analysis and numerical simulations, we derive and investigate a system of homogenized Maxwell's equations for conducting material sheets that are periodically arranged and embedded in a heterogeneous and anisotropic dielectric host. This structure is motivated by the need to design plasmonic crystals that enable the propagation of electromagnetic waves with no phase delay (epsilon-near-zero effect). Our microscopic model incorporates the surface conductivity of the two-dimensional (2D) material of each sheet and a corresponding line charge density through a line conductivity along possible edges of the sheets. Our analysis generalizes averaging principles inherent in previous Bloch-wave approaches. We investigate physical implications of our findings. In particular, we emphasize the role of the vector-valued corrector field, which expresses microscopic modes of surface waves on the 2D material. We demonstrate how our homogenization procedure may set the foundation for computational investigations of: effective optical responses of reasonably general geometries, and complicated design problems in the plasmonics of 2D materials.

Identification of Guide-Intrinsic Determinants of Cas9 Specificity

Considerable effort has been devoted to developing a comprehensive understanding of CRISPR nuclease specificity. In silico predictions and multiple genome-wide cellular and biochemical approaches have revealed a basic understanding of the Cas9 specificity profile. However, none of these approaches has delivered a model that allows accurate prediction of a CRISPR nuclease's ability to cleave a site based entirely on the sequence of the guide RNA (gRNA) and the target. We describe a library-based biochemical assay that directly reports the cleavage efficiency of a particular Cas9-guide complex by measuring both uncleaved and cleaved target molecules over a wide range of mismatched library members. We applied our assay using libraries of targets to evaluate the specificity of Staphylococcus aureus Cas9 under a variety of experimental conditions. Surprisingly, our data show an unexpectedly high variation in the random gRNA:target DNA mismatch tolerance when cleaving with different gRNAs, indicating guide-intrinsic mismatch permissiveness and challenging the assumption of universal specificity models. We use data generated by our assay to create the first off-target, guide-specific cleavage models. The barcoded libraries of targets approach is rapid, highly modular, and capable of generating protein- and guide-specific models, as well as illuminating the biophysics of Cas9 binding versus cutting. These models may be useful in identifying potential off-targets, and the gRNA-intrinsic nature of mismatch tolerance argues for coupling these specificity models with orthogonal methods for a more complete assessment of gRNA specificity.

Magnetic Hyperbolic Metasurface: Concept, Design, and Applications

A fundamental cornerstone in nanophotonics is the ability to achieve hyperbolic dispersion of surface plasmons, which shows excellent potentials in many unique applications, such as near-field heat transport, planar hyperlens, strongly enhanced spontaneous emission, and so forth. The hyperbolic metasurfaces with such an ability, however, are currently restricted to electric hyperbolic metasurface paradigm, and realization of magnetic hyperbolic metasurfaces remains elusive despite the importance of manipulating magnetic surface plasmons (MSPs) at subwavelength scale. Here, magnetic hyperbolic metasurfaces are proposed and designed, on which diffraction-free propagation, anomalous diffraction, negative refraction, and frequency-dependent strong spatial distributions of the MSPs in the hyperbolic regime are experimentally observed at microwave frequencies. The findings can be applied to manipulate MSPs and design planarized devices for near-field focusing, imaging, and spatial multiplexers. This concept is also generalizable to terahertz and optical frequencies and inspires novel quantum optical apparatuses with strong magnetic light-matter interactions.