Non defect-stabilized thermally stable single-atom catalyst

Substance migration in the synthesis of single-atom catalysts

Substance migration is universal and crucial in the synthesis of catalysts, which directly affects their existing form and the micro-structure of their active sites. Realizing migration during the synthesis of single-atom catalysts (SACs) is beneficial for not only increasing their metal loading capacity but also manipulating the electronic structures (coordination structure, long-range interactions, etc.) of their metal sites. This review summarizes the thermodynamics and kinetic processes involved in the synthesis of SACs to unveil the fundamental principles involved in their synthesis. For a better understanding of the effect of migration, the migration of both metal (including ions, atoms, and molecules) and nonmetal species is outlined. Moreover, we propose the research directions to guide the rational design of SACs in the future and deepen the fundamental understanding in the formation of catalysts.

Unravelling the Effect of Oxygen on the Sintering Mechanism of Pt/CeO2 in the CO Oxidation Reaction

Sintering significantly contributes to the deactivation of supported metal catalysts under reaction conditions, influenced by various factors, including temperature, atmosphere, and metal-support interactions. The sintering mechanism under the reaction conditions remains complex and ambiguous. This study delves into the sintering behavior of platinum on CeO2 under CO oxidation conditions, mainly employing transmission electron microscopy to elucidate the effects of different gas components on the sintering mechanism at elevated temperatures. An atmosphere rich in oxygen promotes the sintering of Pt via the Ostwald ripening mechanism, characterized by the growth of larger nanoparticles at the expense of smaller ones. Conversely, sintering proceeds through particle migration and coalescence in the absence of oxygen, leading to the aggregation of nanoparticles. The obtained Pt/CeO2 catalysts exhibit enhanced catalytic performance after treatment with argon and stoichiometric reaction gases, contrasting with the deactivation observed under oxygen-rich conditions, which is attributed to varied Pt valence states. These findings provide insights into understanding the sintering mechanisms and inform the design of heterogeneous catalysts.

Active Interfacial Perimeter in Pt/CeO2 Catalysts with Embedding Structure for Water-Tolerant Toluene Combustion

Supported Pt catalysts are often subjected to severe deactivation under the conditions of high temperature and water vapor in catalytic oxidation; thus, the superior stability and water-resistant ability of catalysts have great significance for the effective degradation of volatile organic compounds (VOCs). Herein, we constructed a Pt/CeO2-N catalyst with an active interfacial perimeter, in which Pt species were partially embedded in the defective CeO2-N support to prevent the sintering. A significant charge transfer between Pt species and ceria in the embedding structure occurred via the Pt-CeO2 interface, which induced the formation of a Pt4+-Ov-Ce3+ interfacial structure. Experimental research and theoretical calculations demonstrated that the active Pt4+-Ov-Ce3+ interface promoted the activation and migration of lattice oxygen, thus facilitating the participation of oxygen species in toluene oxidation. Consequently, Pt/CeO2-N showed excellent catalytic performance for toluene degradation. In situ DRIFTS and DFT calculation proved that the Pt4+-Ov-Ce3+ interfacial sites served as the intrinsic active center in the dissociation of H2O to generate ·OH, which contributed to the formation of benzaldehyde, thus remarkably improving the water-resistant property. This study provided a facile strategy for fabricating the interfacial embedding structure to enhance the catalytic activity and water tolerance for eliminating VOCs in practical application.

Synthesis of defect-rich La2O2CO3 supports for enhanced CO2-to-methanol conversion efficiency

Converting CO2 to methanol is crucial for addressing fuel scarcity and mitigating the greenhouse effect. Cu-based catalysts, with their diverse surface states, offer the potential to control reaction pathways and generate reactive H* species. However, a major challenge lies in oxidizing active Cu0 species by water generated during the catalytic process. While nonreducible metal oxides are beneficial in stabilizing metallic states, their limited capability to generate surface oxygen vacancies (OV) hinders CO2 activation. Herein, we present a strategy by doping Nd into a La2O2CO3 (LOC) support, enhancing OV formation by disrupting its lattice dyadicity. This leads to higher Cu0 concentration and improved CO2 activation. The resulting Cu/LOC:Nd catalyst notably outperforms Cu/LOC and CuZnAl catalysts, achieving a methanol yield of 9.9 moles of methanol per hour per mole of Cu. Our approach opens up possibilities for enhancing Cu-based catalysts in CO2 conversion.

Atomically Dispersed Ru Species Induced by Strong Metal-Support Interaction for Electrochemical Methane Reforming

During the high-temperature oxygen evolution reaction for CO2 electrolysis in solid oxide electrolysis cells (SOECs), the key elementary process of O2- transfer is restricted by the high anodic oxygen pressure thermodynamically, thus requiring a high external voltage [open-circuit voltage (OCV)] to drive the electrolysis reaction. Herein, electrochemical CH4 reforming is introduced to the SOEC anode, which remarkably lowers the anodic oxygen pressure and OCV, finally reducing the energy demand from 3.12 to 0.11 kW h per cubic meter of CO. Meanwhile, atomically dispersed Ru species is anchored on the anode surface due to the strong metal-support interaction, which exhibits superior CH4 reforming activity (90% of CO selectivity) and stability (300 h) to the infiltrated Ru nanoparticles and doped Ru species in the bulk lattice at 600 °C. This work proposes an efficient strategy to boost the SOEC performance thermodynamically and produce value-added chemicals at both the cathode and anode of SOEC simultaneously.

Understanding the active site in chameleon-like bifunctional catalyst for practical rechargeable zinc-air batteries

The practical application of rechargeable zinc-air batteries faces challenges stemming from inadequate bifunctional catalysts, contradictory gas-liquid-solid three-phase interfaces, and an ambiguous fundamental understanding. Herein, we propose a chameleon-like bifunctional catalyst comprising ruthenium single-atoms grafted onto nickel-iron layer double hydroxide (RuSA-NiFe LDH). The adaptive oxidation of RuSA-NiFe LDH to oxyhydroxide species (RuSA-NiFeOOH) during charging exposes active sites for the oxygen evolution reaction, while reversible reduction to NiFe LDH during discharge exposes active sites for the oxygen reduction reaction. Additionally, a hierarchical air cathode featuring hydrophilic and hydrophobic layers facilitates the reversible conversion between RuSA-NiFe LDH and RuSA-NiFeOOH, expedites oxygen bubble desorption, and suppresses carbon corrosion. Consequently, our zinc-air batteries demonstrate a high charge/discharge capacity of 100 mAh cm-2 per cycle, a voltage gap of 0.67 V, and an extended cycle life of 2400 h at 10 mA cm-2. We comprehensively elucidate the catalytic reaction thermodynamics and kinetics for the air cathode through electrode potential decoupling monitoring, oxygen bubble desorption tracking, and carbon content quantification.

Black titanium oxide: synthesis, modification, characterization, physiochemical properties, and emerging applications for energy conversion and storage, and environmental sustainability

Since its advent in 2011, black titanium oxide (B-TiOx) has garnered significant attention due to its exceptional optical characteristics, notably its enhanced absorption spectrum ranging from 200 to 2000 nm, in stark contrast to its unmodified counterpart. The escalating urgency to address global climate change has spurred intensified research into this material for sustainable hydrogen production through thermal, photocatalytic, electrocatalytic, or hybrid water-splitting techniques. The rapid advancements in this dynamic field necessitate a comprehensive update. In this review, we endeavor to provide a detailed examination and forward-looking insights into the captivating attributes, synthesis methods, modifications, and characterizations of B-TiOx, as well as a nuanced understanding of its physicochemical properties. We place particular emphasis on the potential integration of B-TiOx into solar and electrochemical energy systems, highlighting its applications in green hydrogen generation, CO2 reduction, and supercapacitor technology, among others. Recent breakthroughs in the structure-property relationship of B-TiOx and its applications, grounded in both theoretical and empirical studies, are underscored. Additionally, we will address the challenges of scaling up B-TiOx production, its long-term stability, and economic viability to align with ambitious future objectives.

Nano-architectonics of Pt single-atoms and differently-sized nanoparticles supported by manganese-oxide nanosheets and impact on catalytic and anti-biofilm activities

Hybrid-nanozymes are promising in various applications, but comprehensive comparison of hybrid-nanozymes composed of single-atoms or nanoparticles on the same support has never been made. Here, manganese-oxide nanosheets were loaded with Pt-single-atoms or differently-sized nanoparticles and their oxidase- and-peroxidase activities compared. High-resolution Transmission-Electron-Microscopy and corresponding Fast Fourier Transform imaging showed that Pt-nanoparticles (1.5 nm diameter) had no clear (111) crystal-planes, while larger nanoparticles had clear (111) crystal-planes. X-ray Photo-electron Spectroscopy demonstrated that unloaded nanosheets were composed of MnO2 with a high number of oxygen vacancies (Vo/Mn 0.4). Loading with 7.0 nm Pt-nanoparticles induced a change to Mn2O3, while loading with 1.5 nm nanoparticles increased the number of vacancies (Vo/Mn 1.2). Nanosheets loaded with 3.0 nm Pt-nanoparticles possessed similarly high catalytic activities as Pt-single-atoms. However, loading with 1.5 nm or 7.0 nm Pt-nanoparticles yielded lower catalytic activities. A model is proposed explaining the low catalytic activity of under- and over-sized Pt-nanoparticles as compared with intermediately-sized (3.0 nm) Pt-nanoparticles and single-atoms. Herewith, catalytic activities of hybrid-nanozymes composed of single-atoms and intermediately-sized nanoparticles are put a par, as confirmed here with respect to bacterial biofilm eradication. This conclusion facilitates a balanced choice between using Pt-single-atoms or nanoparticles in further development and application of hybrid-nanozymes.

Entropy-Engineered Middle-In Synthesis of Dual Single-Atom Compounds for Nitrate Reduction Reaction

Despite the immense potential of Dual Single-Atom Compounds (DSACs), the challenges in their synthesis process, including complexity, stability, purity, and scalability, remain primary concerns in current research. Here, we present a general strategy, termed "Entropy-Engineered Middle-In Synthesis of Dual Single-Atom Compounds" (EEMIS-DSAC), which is meticulously crafted to produce a diverse range of DSACs, effectively addressing the aforementioned issues. Our strategy integrates the advantages of both bottom-up and top-down paradigms, proposing an insight into optimizing the catalyst structure. The as-fabricated DSACs exhibited excellent activity and stability in the nitrate reduction reaction (NO3RR). In a significant advancement, our prototypical CuNi DSACs demonstrated outstanding performance under conditions reminiscent of industrial wastewater. Specifically, under a NO3- concentration of 2000 ppm, it yielded a Faradaic efficiency (FE) for NH3 of 96.97%, coupled with a mass productivity of 131.47 mg h-1 mg-1 and an area productivity of 10.06 mg h-1 cm-2. Impressively, even under a heightened NO3- concentration of 0.5 M, the FE for NH3 peaked at 90.61%, with a mass productivity reaching 1024.50 mg h-1 mg-1 and an area productivity of 78.41 mg h-1 cm-2. This work underpins the potential of the EEMIS-DSAC approach, signaling a frontier for high-performing DSACs.

Catalytic Refining Lignin-Derived Monomers: Seesaw Effect between Nanoparticle and Single-Atom Pt

Pt automatically adsorbed on oxygen vacancy of TiO2 via an in situ interfacial redox reaction, resulting in atomically dispersion of Pt on TiO2. In the upgrading of lignin-derived 4-propylguaiacol, single-atom catalyst (SAC) Pt/TiO2-H achieved a conversion of 96.9 % and a demethoxylation selectivity of 93.3 % under 3 MPa H2 at 250 °C for 3 h, markedly different from the performance of nanoparticle counterpart that gave deep deoxygenation selectivity over 99.0 %. The high demethoxylation activity of SAC Pt/TiO2-H is mainly attributed to its weak hydrogen spillover capacity that suppressed the benzene ring hydrogenation and the deep deoxygenation. Additionally, SAC Pt/TiO2-H reduced the energy barrier of CAr-OCH3 bond cleavage and accordingly lowered the Gibbs free energy of the demethoxylation reaction. This facile method could fabricate single-atom Au, Pd, Ir, and Ru supported on TiO2-H, demonstrating the generality of this strategy for the establishment of a library of SACs. Moreover, SAC exhibited versatile capacity in demethoxylation of different lignin-derived monomers and high stability. This study showcases the superiority of atomically dispersed metal catalysts for selective demethoxylation reactions and proposes a renewable alternative to fossil-based 4-alkylphenols through upgrading of lignin-derived monomers.

Toward Functionality and Deactivation of Metal-Single-Atom in Heterogeneous Photocatalysts

Single-atom heterogeneous catalysts (SAHCs) provide an enticing platform for understanding catalyst structure-property-performance relationships. The 100% atom utilization and adjustable local coordination configurations make it easy to probe reaction mechanisms at the atomic level. However, the progressive deactivation of metal-single-atom (MSA) with high surface energy leads to frequent limitations on their commercial viability. This review focuses on the atomistic-sensitive reactivity and atomistic-progressive deactivation of MSA to provide a unifying framework for specific functionality and potential deactivation drivers of MSA, thereby bridging function, purpose-modification structure-performance insights with the atomistic-progressive deactivation for sustainable structure-property-performance accessibility. The dominant functionalization of atomically precise MSA acting on properties and reactivity encompassing precise photocatalytic reactions is first systematically explored. Afterward, a detailed analysis of various deactivation modes of MSA and strategies to enhance their durability is presented, providing valuable insights into the design of SAHCs with deactivation-resistant stability. Finally, the remaining challenges and future perspectives of SAHCs toward industrialization, anticipating shedding some light on the next stage of atom-economic chemical/energy transformations are presented.

Visualizing Dynamic Single Atom Catalysis

Many industrial chemical processes, including for producing fuels, foods, pharmaceuticals, chemicals and environmental controls, employ heterogeneous solid state catalysts at elevated temperatures in gas or liquid environments. Dynamic reactions at the atomic level play a critical role in catalyst stability and functionality. In situ visualization and analysis of atomic-scale processes in real time under controlled reaction environments can provide important insights into practical frameworks to improve catalytic processes and materials. This review focuses on innovative real time in situ electron microscopy (EM) methods, including recent progress in analytical in situ environmental (scanning) transmission EM (E(STEM), incorporating environmental scanning TEM (ESTEM) and environmental transmission EM (ETEM), with single atom resolution for visualizing and analysing dynamic single atom catalysis under controlled flowing gas reaction environments. ESTEM studies of single atom dynamics of reactions, and of sintering deactivation, contribute to a better-informed understanding of the yield and stability of catalyst operations. Advances in in situ technologies, including gas and liquid sample holders, nanotomography, and higher voltages, as well as challenges and opportunities in tracking reacting atoms, are highlighted. The findings show that the understanding and application of fundamental processes in catalysis can be improved, with valuable economic, environmental, and societal benefits.

Regulating Second-Shell Coordination in Cobalt Single-Atom Catalysts toward Highly Selective Hydrogenation

Manipulating the local coordination environment of central metal atoms in single-atom catalysts (SACs) is a powerful strategy to exploit efficient SACs with optimal electronic structures for various applications. Herein, Co-SACs featured by Co single atoms with coordinating S atoms in the second shell dispersed in a nitrogen-doped carbon matrix have been developed toward the selective hydrogenation of halo-nitrobenzene. The location of the S atom in the model Co-SAC is verified through synchrotron-based X-ray absorption spectroscopy and theoretical calculations. The resultant Co-SACs containing second-coordination shell S atoms demonstrate excellent activity and outstanding durability for selective hydrogenation, superior to most precious metal-based catalysts. In situ characterizations and theoretical results verify that high activity and selectivity are attributed to the advantageous formation of the Co-O bond between p-chloronitrobenzene and Co atom at Co1N4-S moieties and the lower free energy and energy barriers of the reaction. Our findings unveil the correlation between the performance and second-shell coordination atom of SACs.

General negative pressure annealing approach for creating ultra-high-loading single atom catalyst libraries

Catalyst systems populated by high-density single atoms are crucial for improving catalytic activity and selectivity, which can potentially maximize the industrial prospects of heterogeneous single-atom catalysts (SACs). However, achieving high-loading SACs with metal contents above 10 wt% remains challenging. Here we describe a general negative pressure annealing strategy to fabricate ultrahigh-loading SACs with metal contents up to 27.3-44.8 wt% for 13 different metals on a typical carbon nitride matrix. Furthermore, our approach enables the synthesis of high-entropy single-atom catalysts (HESACs) that exhibit the coexistence of multiple metal single atoms with high metal contents. In-situ aberration-corrected HAADF-STEM (AC-STEM) combined with ex-situ X-ray absorption fine structure (XAFS) demonstrate that the negative pressure annealing treatment accelerates the removal of anionic ligand in metal precursors and boosts the bonding of metal species with N defective sites, enabling the formation of dense N-coordinated metal sites. Increasing metal loading on a platinum (Pt) SAC to 41.8 wt% significantly enhances the activity of propane oxidation towards liquid products, including acetone, methanol, and acetic acid et al. This work presents a straightforward and universal approach for achieving many low-cost and high-density SACs for efficient catalytic transformations.

Spin-polarized p-block antimony/bismuth single-atom catalysts on defect-free rutile TiO2(110) substrate for highly efficient CO oxidation

Developing high-loading spin-polarized p-block-element-based single-atom catalysts (p-SACs) upon defect-free substrates for various chemical reactions wherein spin selection matters is generally considered a formidable challenge because of the difficulty of creating high densities of underpinning stable defects and the delocalized electronic features of p-block elements. Here our first-principles calculations establish that the defect-free rutile TiO2(110) wide-bandgap semiconducting anchoring support can stabilize and localize the wavefunctions of p-block metal elements (Sb and Bi) via strong ionic bonding, forming spin-polarized p-SACs. Cooperated by the underlying d-block Ti atoms via a delicate spin donation-back-donation mechanism, the p-block single-atom reactive center Sb(Bi) exhibits excellent catalysis for spin-triplet O2 activation and CO oxidation in alignment with Wigner's spin selection rule, with a low rate-limiting reaction barrier of ∼0.6 eV. This work is crucial in establishing high-loading reactive centers of high-performance p-SACs for various important physical processes and chemical reactions, especially wherein the spin degree of freedom matters, i.e., spin catalysis.

Atomic Pt Sites Anchored in the Interface between Grains on Vacancy-Enriched CeO2 Nanosheets: One-Step Precursor Combustion Synthesis

Atomic metal catalysts have unique electronic, structural, and catalytic properties, which are widely used in the field of catalysis. However, designing new simple synthesis methods to fabricate atomic metal catalysts is a challenge in catalytic applications. Herein, a one-step precursor combustion strategy is presented that starts directly from precursors of metal salts, using a spontaneous combustion process convert platinum nitrate to atomic Pt sites. The atomic Pt sites with low valence are anchored in the formed interface between grains on vacancy-enriched CeO2 nanosheets. The obtained Pt/CeO2-2 catalyst exhibits much higher three-way catalytic activities at low temperatures than Pt/CeO2-C catalysts prepared using the traditional impregnation method. Density functional theory calculations show that the generated lower valent Pt atoms in the CeO2 interface promote catalytic activity through reducing the energy barrier, and lead to an overall improvement of three-way catalytic activities. This facile strategy provides new insights into the study of the properties and applications of atomic noble metal catalysts.

Capture of single Ag atoms through high-temperature-induced crystal plane reconstruction

The "terminal hydroxyl group anchoring mechanism" has been studied on metal oxides (Al2O3, CeO2) as well as a variety of noble and transition metals (Ag, Pt, Pd, Cu, Ni, Fe, Mn, and Co) in a number of generalized studies, but there is still a gap in how to regulate the content of terminal hydroxyl groups to influence the dispersion of the active species and thus to achieve optimal catalytic performance. Herein, we utilized AlOOH as a precursor for γ-Al2O3 and induced the transformation of the exposed crystal face of γ-Al2O3 from (110) to (100) by controlling the calcination temperature to generate more terminal hydroxyl groups to anchor Ag species. Experimental results combined with AIMD and DFT show that temperature can drive the atomic rearrangement on the (110) crystal face, thereby forming a structure similar to the atomic arrangement of the (100) crystal face. This resulted in the formation of more terminal hydroxyl groups during the high-temperature calcination of the support (Al-900), which can capture Ag species to form single-atom dispersions, and ultimately develop a stable and efficient single-atom Ag-based catalyst.

Electrochemical Knocking-Down of Zn Metal Clusters into Single Atoms

Single Atoms Catalysts (SACs) have emerged as a class of highly promising heterogeneous catalysts, where the traditional bottom-up synthesis approaches often encounter considerable challenges in relation to aggregation issues and poor stability. Consequently, achieving densely dispersed atomic species in a reliable and efficient manner remains a key focus in the field. Herein, we report a new facile electrochemical knock-down strategy for the formation of SACs, whereby the metal Zn clusters are transformed into single atoms. While a defect-rich substrate plays a pivotal role in capturing and stabilizing isolated Zn atoms, the feasibility of this novel strategy is demonstrated through a comprehensive investigation, combining experimental and theoretical studies. Furthermore, when studied in exploring for potential applications, the material prepared shows a remarkable improvement of 58.21% for the Li+ storage and delivers a capacity over 300 Wh kg-1 after 500 cycles upon the transformation of Zn clusters into single atoms.

Highly Active and Sintering-Resistant Pt Clusters Supported on FeOx-Hydroxyapatite Achieved by Tailoring Strong Metal-Support Interactions

The catalytic performance of supported metal catalysts is closely related to their structure. While Pt-based catalysts are widely used in many catalytic reactions because of their exceptional intrinsic activity, they tend to deactivate in high-temperature reactions, requiring a tedious and expensive regeneration process. The strong metal-support interaction (SMSI) is a promising strategy to improve the stability of supported metal nanoparticles, but often at the price of the activity due to either the coverage of the active sites by support overlay and/or the too-strong metal-support bonding. Herein, we newly constructed a supported Pt cluster catalyst by introducing FeOx into hydroxyapatite (HAP) support to fine-tune the SMSIs. The catalyst exhibited not only high catalytic activity but also sintering resistance, without deactivation in a 100 h test for catalytic CO oxidation. Detailed characterizations reveal that FeOx introduced into HAP weaken the strong covalent metal-support interaction (CMSI) between Pt and FeOx while simultaneously inhibiting the oxidative strong metal-support interaction (OMSI) between Pt and HAP, giving rise to both high activity and thermal stability of the supported Pt clusters.

Understanding the Dynamic Aggregation in Single-Atom Catalysis

The dynamic response of single-atom catalysts to a reactive environment is an increasingly significant topic for understanding the reaction mechanism at the molecular level. In particular, single atoms may experience dynamic aggregation into clusters or nanoparticles driven by thermodynamic or kinetic factors. Herein, the inherent mechanistic nuances that determine the dynamic profile during the reaction will be uncovered, including the intrinsic stability and site-migration barrier of single atoms, external stimuli (temperature, voltage, and adsorbates), and the influence of catalyst support. Such dynamic aggregation can be beneficial or deleterious on the catalytic performance depending on the optimal initial state. Those examples will be highlighted where in situ formed clusters, rather than single atoms, serve as catalytically active sites for improved catalytic performance. This is followed by the introduction of operando techniques to understand the structural evolution. Finally, the emerging strategies via confinement and defect-engineering to regulate dynamic aggregation will be briefly discussed.

Polyoxometalate-Structured Materials: Molecular Fundamentals and Electrocatalytic Roles in Energy Conversion

Polyoxometalates (POMs), a kind of molecular metal oxide cluster with unique physical-chemical properties, have made essential contributions to creating efficient and robust electrocatalysts in renewable energy systems. Due to the fundamental advantages of POMs, such as the diversity of molecular structures and large numbers of redox active sites, numerous efforts have been devoted to extending their application areas. Up to now, various strategies of assembling POM molecules into superstructures, supporting POMs on heterogeneous substrates, and POMs-derived metal compounds have been developed for synthesizing electrocatalysts. From a multidisciplinary perspective, the latest advances in creating POM-structured materials with a unique focus on their molecular fundamentals, electrocatalytic roles, and the recent breakthroughs of POMs and POM-derived electrocatalysts, are systematically summarized. Notably, this paper focuses on exposing the current states, essences, and mechanisms of how POM-structured materials influence their electrocatalytic activities and discloses the critical requirements for future developments. The future challenges, objectives, comparisons, and perspectives for creating POM-structured materials are also systematically discussed. It is anticipated that this review will offer a substantial impact on stimulating interdisciplinary efforts for the prosperities and widespread utilizations of POM-structured materials in electrocatalysis.

Bimetallic PtPd Atomic Clusters as Apoptosis/Ferroptosis Inducers for Antineoplastic Therapy through Heterogeneous Catalytic Processes

Active polymetallic atomic clusters can initiate heterogeneous catalytic reactions in the tumor microenvironment, and the products tend to cause manifold damage to cell metabolic functions. Herein, bimetallic PtPd atomic clusters (BAC) are constructed by the stripping of Pt and Pd nanoparticles on nitrogen-doped carbon and follow-up surface PEGylation, aiming at efficacious antineoplastic therapy through heterogeneous catalytic processes. After endocytosed by tumor cells, BAC with catalase-mimic activity can facilitate the decomposition of endogenous H2O2 into O2. The local oxygenation not only alleviates hypoxia to reduce the invasion ability of cancer cells but also enhances the yield of •O2- from O2 catalyzed by BAC. Meanwhile, BAC also exhibit peroxidase-mimic activity for •OH production from H2O2. The enrichment of reactive oxygen species (ROS), including the radicals of •OH and •O2-, causes significant oxidative cellular damage and triggers severe apoptosis. In another aspect, intrinsic glutathione (GSH) peroxidase-like activity of BAC can indirectly upregulate the level of lipid peroxides and promote ferroptosis. Such deleterious redox dyshomeostasis caused by ROS accumulation and GSH consumption also results in immunogenic cell death to stimulate antitumor immunity for metastasis suppression. Collectively, this paradigm is expected to inspire more facile designs of polymetallic atomic clusters in disease therapy.

Spontaneous Deposition of Single Platinum Atoms on Anatase TiO2 for Photocatalytic H2 Evolution

Single-atom (SA) decoration has emerged as a frontier in catalysis due to its unique characteristics. Recently, decorated Pt single atoms on titania have shown promise in photocatalytic hydrogen evolution. In this work, we demonstrate that Pt SAs can spontaneously deposit on the surface, driven by electrostatic forces; the key is to determine the golden pH and surface potential. We conducted a comprehensive investigation into the influence of the pH of the deposition precursor on the spontaneous adsorption of Pt SAs onto TiO2 nanosheets (TiNSs). We introduced a straightforward pH-dependent and charge-dependent strategy for the solid electrostatic anchoring of Pt SAs on TiO2. Furthermore, we established that the level of Pt loading can be controlled by adjusting the precursor pH. X-ray photoelectron spectroscopy (XPS) and high-angle annular dark-field imaging scanning transmission electron microscopy (HAADF-STEM) were used to evaluate the Pt SA-decorated samples. Photocatalytic hydrogen production activity was assessed under ultraviolet (UV) (365 nm) irradiation. Notably, we found that at a pH of 8, slightly below the measured point of zero charge (PZC), a unique mixture of Pt clusters and single atoms was deposited on the surface of TiNSs. This unique composition significantly improved hydrogen production, resulting in ∼3.7 mL of hydrogen generated after 8 h of UV exposure by only 10 mg of the Pt-decorated TiNS (with Pt loadings of 0.12 at. %), which is ∼300 times higher than the undecorated TiNS.

Smart/stimuli-responsive chitosan/gelatin and other polymeric macromolecules natural hydrogels vs. synthetic hydrogels systems for brain tissue engineering: A state-of-the-art review

Currently, there are no viable curative treatments that can enhance the central nervous system's (CNS) recovery from trauma or illness. Bioengineered injectable smart/stimuli-responsive hydrogels (SSRHs) that mirror the intricacy of the CNS milieu and architecture have been suggested as a way to get around these restrictions in combination with medication and cell therapy. Additionally, the right biophysical and pharmacological stimuli are required to boost meaningful CNS regeneration. Recent research has focused heavily on developing SSRHs as cutting-edge delivery systems that can direct the regeneration of brain tissue. In the present article, we have discussed the pathology of brain injuries, and the applicable strategies employed to regenerate the brain tissues. Moreover, the most promising SSRHs for neural tissue engineering (TE) including alginate (Alg.), hyaluronic acid (HA), chitosan (CH), gelatin, and collagen are used in natural polymer-based hydrogels and thoroughly discussed in this review. The ability of these hydrogels to distribute bioactive substances or cells in response to internal and external stimuli is highlighted with particular attention. In addition, this article provides a summary of the most cutting-edge techniques for CNS recovery employing SSRHs for several neurodegenerative diseases.

First-Principles Study of Bimetallic Pairs Embedded on Graphene Co-Doped with N and O for N2 Electroreduction

The electrocatalytic nitrogen reduction reaction (NRR) is considered a viable alternative to the Haber-Bosch process for ammonia synthesis, and the design of highly active and selective catalysts is crucial for the industrialization of the NRR. Dual-atom catalysts (DACs) with dual active sites offer flexible active sites and synergistic effects between atoms, providing more possibilities for the tuning of catalytic performance. In this study, we designed 48 graphene-based DACs with N4O2 coordination (MM'@N4O2-G) using density functional theory. Through a series of screening strategies, we explored the reaction mechanisms of the NRR for eight catalysts in depth and revealed the "acceptance-donation" mechanism between the active sites and the N2 molecules through electronic structure analysis. The study found that the limiting potential of the catalysts exhibited a volcano-shaped relationship with the d-band center of the active sites, indicating that the synergistic effect between the bimetallic components can regulate the d-band center position of the active metal M, thereby controlling the reaction activity. Furthermore, we investigated the selectivity of the eight DACs and identified five potential NRR catalysts. Among them, MoCo@N4O2-G showed the best NRR performance, with a limiting potential of -0.20 V. This study provides theoretical insights for the design and development of efficient NRR electrocatalysts.

Thermally induced intermetallic Rh1Zn1 nanoparticles with high phase-purity for highly selective hydrogenation of acetylene

Ordered M1Zn1 intermetallic phases with structurally isolated atom sites offer unique electronic and geometric structures for catalytic applications, but lack reliable industrial synthesis methods that avoid forming a disordered alloy with ill-defined composition. We developed a facile strategy for preparing well-defined M1Zn1 intermetallic nanoparticle (i-NP) catalysts from physical mixtures of monometallic M/SiO2 (M = Rh, Pd, Pt) and ZnO. The Rh1Zn1 i-NPs with structurally isolated Rh atom sites had a high intrinsic selectivity to ethylene (91%) with extremely low C4 and oligomer formation, outperforming the reported intermetallic and alloy catalysts in acetylene semihydrogenation. Further studies revealed that the M1Zn1 phases were formed in situ in a reducing atmosphere at 400 °C by a Zn atom emitting-trapping-ordering (Zn-ETO) mechanism, which ensures the high phase-purity of i-NPs. This study provides a scalable and practical solution for further exploration of Zn-based intermetallic phases and a new strategy for designing Zn-containing catalysts.

Single-Walled Cluster Nanotubes for Single-Atom Catalysts with Precise Structures

Spatially confining isolated atomic sites in low-dimensional nanostructures is a promising strategy for preparing high-performance single-atom catalysts (SACs). Herein, fascinating polyoxometalate cluster-based single-walled nanotubes (POM-SWNTs) with atomically precise structures, uniform diameter, and single-cluster wall thickness are constructed by lacunary POM clusters (PW11 and P2W17 clusters). Isolated metal centers are accurately incorporated into the PW11-SWNTs and P2W17-SWNTs supports. The structures of the resulting MPW11-SWNTs and MP2W17-SWNTs are well established (M = Cu, Pt). Molecular dynamics simulations demonstrate the stability of POM-SWNTs. Furthermore, the turnover frequency of PtP2W17-SWNTs is 20 times higher than that of PtP2W17 cluster units and 140 times higher than that of Pt nanoparticles in the alcoholysis of dimethylphenylsilane. Theoretical studies indicate that incorporating a Pt atom into the P2W17 support induces straightforward electron transfer between them, combining the nanoconfined environment to enhance the catalytic activity of PtP2W17-SWNTs. This work shows the feasibility of using subnanometric POM clusters to assemble single-walled cluster nanotubes, highlighting their potential to prepare superior SACs with precise structures.

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

Contemporary advances in photocatalytic CO2 reduction using single-atom catalysts supported on carbon-based materials

The persistent issue of CO2 emissions and their subsequent impact on the Earth's atmosphere can be effectively addressed through the utilization of efficient photocatalysts. Employing a sustainable carbon cycle via photocatalysis presents a promising technology for simultaneously managing the greenhouse effect and the energy dilemma. However, the efficiency of energy conversion encounters limitations due to inadequate carrier utilization and a deficiency of reactive sites. Single-atom catalysts (SACs) have demonstrated exceptional performance in efficiently addressing the aforementioned challenges. This review article commences with an overview of SAC types, structures, fundamentals, synthesis strategies, and characterizations, providing a logical foundation for the design and properties of SACs based on the correlation between their structure and efficiency. Additionally, we delve into the general mechanism and the role of SACs in photocatalytic CO2 reduction. Furthermore, we furnish a comprehensive survey of the latest advancements in SACs concerning their capacity to enhance efficiency, long-term stability, and selectivity in CO2 reduction. Carbon-structured support materials such as covalent organic frameworks (COFs), graphitic carbon nitride (g-C3N4), metal-organic frameworks (MOFs), covalent triazine frameworks (CTFs), and graphene-based photocatalysts have garnered significant attention due to their substantial surface area, superior conductivity, and chemical stability. These carbon-based materials are frequently chosen as support matrices for anchoring single metal atoms, thereby enhancing catalytic activity and selectivity. The motivation behind this review article lies in evaluating recent developments in photocatalytic CO2 reduction employing SACs supported on carbon substrates. In conclusion, we highlight critical issues associated with SACs, potential prospects in photocatalytic CO2 reduction, and existing challenges. This review article is dedicated to providing a comprehensive and organized compilation of recent research findings on carbon support materials for SACs in photocatalytic CO2 reduction, with a specific focus on materials that are environmentally friendly, readily accessible, cost-effective, and exceptionally efficient. This work offers a critical assessment and serves as a systematic reference for the development of SACs supported on MOFs, COFs, g-C3N4, graphene, and CTFs support materials to enhance photocatalytic CO2 conversion.

Surface Activation by Single Ru Atoms for Enhanced High-Temperature CO2 Electrolysis

Cathodic CO2 adsorption and activation is essential for high-temperature CO2 electrolysis in solid oxide electrolysis cells (SOECs). However, the component of oxygen ionic conductor in the cathode displays limited electrocatalytic activity. Herein, stable single Ruthenium (Ru) atoms are anchored on the surface of oxygen ionic conductor (Ce0.8 Sm0.2 O2-δ , SDC) via the strong covalent metal-support interaction, which evidently modifies the electronic structure of SDC surface for favorable oxygen vacancy formation and enhanced CO2 adsorption and activation, finally evoking the electrocatalytic activity of SDC for high-temperature CO2 electrolysis. Experimentally, SOEC with the Ru1 /SDC-La0.6 Sr0.4 Co0.2 Fe0.8 O3-δ cathode exhibits a current density as high as 2.39 A cm-2 at 1.6 V and 800 °C. This work expands the application of single atom catalyst to the high-temperature electrocatalytic reaction in SOEC and provides an efficient strategy to tailor the electronic structure and electrocatalytic activity of SOEC cathode at the atomic scale.

Active sites of atomically dispersed Pt supported on Gd-doped ceria with improved low temperature performance for CO oxidation

"Single - atom" catalysts (SACs) have been the focus of intense research, due to debates about their reactivity and challenges toward determining and designing "single - atom" (SA) sites. To address the challenge, in this work, we designed Pt SACs supported on Gd-doped ceria (Pt/CGO), which showed improved activity for CO oxidation compared to its counterpart, Pt/ceria. The enhanced activity of Pt/CGO was associated with a new Pt SA site which appeared only in the Pt/CGO catalyst under CO pretreatment at elevated temperatures. Combined X-ray and optical spectroscopies revealed that, at this site, Pt was found to be d-electron rich and bridged with Gd-induced defects via an oxygen vacancy. As explained by density functional theory calculations, this site opened a new path via a dicarbonyl intermediate for CO oxidation with a greatly reduced energy barrier. These results provide guidance for rationally improving the catalytic properties of SA sites for oxidation reactions.

Electronic Asymmetry Engineering of Fe-N-C Electrocatalyst via Adjacent Carbon Vacancy for Boosting Oxygen Reduction Reaction

Single-atomic transition metal-nitrogen-carbon (M-N-C) structures are promising alternatives toward noble-metal-based catalysts for oxygen reduction reaction (ORR) catalysis involved in sustainable energy devices. The symmetrical electronic density distribution of the M─N4 moieties, however, leads to unfavorable intermediate adsorption and sluggish kinetics. Herein, a Fe-N-C catalyst with electronic asymmetry induced by one nearest carbon vacancy adjacent to Fe─N4 is conceptually produced, which induces an optimized d-band center, lowered free energy barrier, and thus superior ORR activity with a half-wave potential (E1/2 ) of 0.934 V in a challenging acidic solution and 0.901 V in an alkaline solution. When assembled as the cathode of a Zinc-air battery (ZAB), a peak power density of 218 mW cm-2 and long-term durability up to 200 h are recorded, 1.5 times higher than the noble metal-based Pt/C+RuO2 catalyst. This work provides a new strategy on developing efficient M-N-C catalysts and offers an opportunity for the real-world application of fuel cells and metal-air batteries.

Single-Atom Platinum Catalyst for Efficient CO2 Conversion via Reverse Water Gas Shift Reaction

The need to tackle CO2 emissions arising from the continuously rising combustion of fossil fuels has sparked considerable interest in investigating the reverse water gas shift (RWGS) reaction. This reaction holds great promise as an alternative technique for the conversion and utilization of CO2. In this study, a scalable method was employed to synthesize a single-atom Pt catalyst, uniformly dispersed on SiC, where up to 6.4 wt% Pt1 was loaded onto a support based on ligand modification and UV photoreduction. This Pt1/SiC catalyst exhibited a high selectivity (100%) towards the RWGS reaction; 54% CO2 conversion was observed at 900 °C with a H2/CO2 feed-in ratio of 1:1, significantly higher than the conventional Pt nanoparticle counterparts. Moreover, Pt1/SiC displayed a robust stability during the long-term test. The activation energy with as-synthesized Pt1/SiC was further calculated to be 61.6 ± 6.4 kJ/mol, which is much lower than the 91.6 ± 15.9 kJ/mol of the Pt nanoparticle counterpart and other Pt-based catalysts reported so far. This work offers new insights into the utilization of diverse single-atom catalysts for the RWGS reaction and other crucial catalytic processes, paving the way for the further exploration and application of SACs in various industrial endeavors.

Hydrogen Evolution Reaction on Single-Atom Pt Doped in Ni Matrix under Strong Alkaline Condition

Pt catalyst has been considered as the state-of-the-art catalyst for hydrogen evolution reaction (HER) under acid condition. However, its catalytic kinetics under alkaline conditions is not well-understood. Herein, we report a Ni-Pt(SAs) (SAs = single atoms) catalyst with Pt atomically dispersed in a Ni matrix, and it possesses an impressive HER performance with an overpotential as low as 210 mV at 500 mA cm-2 in strong alkaline electrolyte (7 M KOH), which is much higher than Pt nanoparticle-modified Ni catalyst (Ni-Pt(NPs)). Kinetics analysis reveals that Pt doping in the Ni matrix can accelerate the Volmer step on the Ni-Pt surface. Moreover, Ni-Pt(SAs) displays a more favorable kinetics for H2 formation reaction at high current density than Ni-Pt(NPs). Theoretical calculations reveal that atomically dispersed Pt weakens the adsorption of both H and OH on the surface of Ni-Pt electrode and promotes H2 formation from surface H on Ni-Pt(SAs).

Chemical Kinetics of Metal Single Atom and Nanocluster Formation on Surfaces: An Example of Pt on Hexagonal Boron Nitride

The production of atomically dispersed metal catalysts remains a significant challenge in the field of heterogeneous catalysis due to coexistence with continuously packed sites such as nanoclusters and nanoparticles. This work presents a comprehensive guidance on how to increase the degree of atomization through a selection of appropriate experimental conditions and supports. It is based on a rigorous macro-kinetic theory that captures relevant competing processes of nucleation and formation of single atoms stabilized by point defects. The effects of metal-support interactions and deposition parameters on the resulting single atom to nanocluster ratio as well as the role of metal centers formed on point defects in the kinetics of nucleation have been established, thus paving the way to guided synthesis of single atom catalysts. The predictions are supported by experimental results on sputter deposition of Pt on exfoliated hexagonal boron nitride, as imaged by aberration-corrected scanning transmission electron microscopy.

Ultrasound-Driven Defect Engineering in TiO2-x Nanotubes─Toward Highly Efficient Platinum Single Atom-Enhanced Photocatalytic Water Splitting

Single-atom catalysts (SACs) have demonstrated superior catalytic activity and selectivity compared to nanoparticle catalysts due to their high reactivity and atom efficiency. However, stabilizing SACs within hosting substrates and their controllable loading preventing single atom clustering remain the key challenges in this field. Moreover, the direct comparison of (co-) catalytic effect of single atoms vs nanoparticles is still highly challenging. Here, we present a novel ultrasound-driven strategy for stabilizing Pt single-atomic sites over highly ordered TiO2 nanotubes. This controllable low-temperature defect engineering enables entrapment of platinum single atoms and controlling their content through the reaction time of consequent chemical impregnation. The novel methodology enables achieving nearly 50 times higher normalized hydrogen evolution compared to pristine titania nanotubes. Moreover, the developed procedure allows the decoration of titania also with ultrasmall nanoparticles through a longer impregnation time of the substrate in a very dilute hexachloroplatinic acid solution. The comparison shows a 10 times higher normalized hydrogen production of platinum single atoms compared to nanoparticles. The mechanistic study shows that the novel approach creates homogeneously distributed defects, such as oxygen vacancies and Ti3+ species, which effectively trap and stabilize Pt2+ and Pt4+ single atoms. The optimized platinum single-atom photocatalyst shows excellent performance of photocatalytic water splitting and hydrogen evolution under one sun solar-simulated light, with TOF values being one order of magnitude higher compared to those of traditional thermal reduction-based methods. The single-atom engineering based on the creation of ultrasound-triggered chemical traps provides a pathway for controllable assembling stable and highly active single-atomic site catalysts on metal oxide support layers.

Thermally Methanol Oxidation via the Mn1@Co3O4(111) Facet: Non-CO Reaction Pathway

Co3O4, as the support of single-atom catalysts, is effective in electron-structure modulation to get distinct methanol adsorption behaviors and adjustable reaction pathways for the methanol oxidation reaction. Herein, we considered the facets that constitute a Co vacancy of the Co3O4(111) facet and a foreign metal atom M (M = Fe, Ni, Cu, Ru, Rh, Pd, Ag, Os, Ir, Pt, Au, Mn) leading to single-atom catalysts. The Mn1@Co3O4(111) facet is the facet considered the most favorable among all of the possible terminations. Oxygen adsorption, decomposition, and its co-adsorption with methanol are the vital steps of methanol oxidation at the exposed Mn1@Co3O4(111) facet, giving rise to the stable configuration: two O* and one CH3OH* adsorbates. Then, the Mn1@Co3O4(111) facet activates the O-H and C-H bonds within CH3OH*, advances CH3O* → H2CO* → HCOO* → COO*, and releases the products H2, H2O, and CO2 consecutively.

A General Dual-Metal Nanocrystal Dissociation Strategy to Generate Robust High-Temperature-Stable Alumina-Supported Single-Atom Catalysts

Designing new synthesis routes to fabricate highly thermally durable precious metal single-atom catalysts (SACs) is challenging in industrial applications. Herein, a general strategy is presented that starts from dual-metal nanocrystals (NCs), using bimetallic NCs as a facilitator to spontaneously convert a series of noble metals to single atoms on aluminum oxide. The metal single atoms are captured by cation defects in situ formed on the surface of the inverse spinel (AB₂O₄) structure, which process provides numerous anchoring sites, thus facilitating generation of the isolated metal atoms that contributes to the extraordinary thermodynamic stability. The Pd₁/AlCo₂O₄-Al₂O₃ shows not only improved low-temperature activity but also unprecedented (hydro)thermal stability for CO and propane oxidation under harsh aging conditions. Furthermore, our strategy exhibits a small scaling-up effect by the simple physical mixing of commercial metal oxide aggregates with Al₂O₃. The good regeneration between oxidative and reductive atmospheres of these ionic palladium species makes this catalyst system of potential interest for emissions control.

Progress in photocatalytic CO2 reduction based on single-atom catalysts

Reduced CO2 emissions, conversion, and reuse are critical steps toward carbon peaking and carbon neutrality. Converting CO2 into high-value carbon-containing compounds or fuels may effectively address the energy shortage and environmental issues, which is consistent with the notion of sustainable development. Photocatalytic CO2 reduction processes have become one of the research focuses, where single-atom catalysts have demonstrated significant benefits owing to their excellent percentage of atom utilization. However, among the crucial challenges confronting contemporary research is the production of efficient, low-cost, and durable photocatalysts. In this paper, we offer a comprehensive overview of the study growth on single-atom catalysts for photocatalytic CO2 reduction reactions, describe several techniques for preparing single-atom catalysts, and discuss the advantages and disadvantages of single-atom catalysts and present the study findings of three single-atom photocatalysts with TiO2, g-C3N4 and MOFs materials as carriers based on the interaction between single atoms and carriers, and finally provide an outlook on the innovation of photocatalytic CO2 reduction reactions.

In Situ and Emerging Transmission Electron Microscopy for Catalysis Research

Catalysts are the primary facilitator in many dynamic processes. Therefore, a thorough understanding of these processes has vast implications for a myriad of energy systems. The scanning/transmission electron microscope (S/TEM) is a powerful tool not only for atomic-scale characterization but also in situ catalytic experimentation. Techniques such as liquid and gas phase electron microscopy allow the observation of catalysts in an environment conducive to catalytic reactions. Correlated algorithms can greatly improve microscopy data processing and expand multidimensional data handling. Furthermore, new techniques including 4D-STEM, atomic electron tomography, cryogenic electron microscopy, and monochromated electron energy loss spectroscopy (EELS) push the boundaries of our comprehension of catalyst behavior. In this review, we discuss the existing and emergent techniques for observing catalysts using S/TEM. Challenges and opportunities highlighted aim to inspire and accelerate the use of electron microscopy to further investigate the complex interplay of catalytic systems.

Atomic Aerogel Materials (or Single-Atom Aerogels): An Interesting New Paradigm in Materials Science and Catalysis Science

The concept of "single-atom catalysis" is first proposed by Tao Zhang, Jun Li, and Jingyue Liu in 2011. Single-atom catalysts (SACs) have a very high catalytic activity and greatly improved atom utilization ratio. At present, SACs have become frontier materials in the field of catalysis. Aerogels are highly porous materials with extremely low density and extremely high porosity. These pores play a key role in determining their surface reactivity and mechanical stability. The alliance of SACs and aerogels can fully reflect their structural advantages and lead to new enhancement effects. Herein, a general concept of "atomic aerogel materials" (AAMs) (or single-atom aerogels (SAAs)) is proposed to describe this interesting new paradigm in both material and catalysis fields. Based on the basic units of "gel," the AAMs can be divided into two categories: carrier-level AAMs (with micro-, nano-, or sub-nanometer pore structures) and atomic-level AAMs (with atomic-defective or oxygen-bridged sub-nanopore structures). The basic unit of the former (i.e., single-atom-functionalized aerogels) is the carrier materials in nanostructures, and the latter (i.e., single-atom-built aerogels) is the single metal atoms in atomic structures. The atomic-defective or oxygen-bridged AAMs will be important development directions in versatile heterogeneous catalytic or noncatalytic fields. The design proposals, latent challenges, and coping strategies of this new "atomic nanosystem" in applications are pointed out as well.

Pt single atoms and defect engineering of TiO2-nanosheet-assembled hierarchical spheres for efficient room-temperature HCHO oxidation

Achieving high atomic utilization and low cost of desirable Pt/TiO₂ catalysts is a major challenge for room temperature HCHO oxidation. Here, the strategy of anchoring stable Pt single atoms by abundant oxygen vacancies over TiO₂-nanosheet-assembled hierarchical spheres (Pt₁/TiO₂-HS) was designed to eliminate HCHO. A superior HCHO oxidation activity and CO₂ yield (∼100% CO₂ yield) at relative humidity (RH) > 50% over Pt₁/TiO₂-HS is achieved for long-term run. We attribute the excellent HCHO oxidation performance to the stable isolated Pt single atoms anchored on the defective TiO₂-HS surface. The Pt^δ+ on the Pt₁/TiO₂-HS surface has a facile intense electron transfer with the support by forming Pt-O-Ti linkages, driving HCHO oxidation effectively. Further in situ HCHO-DRIFTS revealed that the dioxymethylene (DOM) and HCOOH/HCOO^- intermediates were further degraded via active OH^- and adsorbed oxygen on the Pt₁/TiO₂-HS surface, respectively. This work may pave the way for the next generation of advanced catalytic materials for high-efficiency catalytic HCHO oxidation at room temperature.

Competitive Trapping of Single Atoms onto a Metal Carbide Surface

Controlling atomic adjustment of single-atom catalysts (SACs) can directly change its local configuration, regulate the energy barrier of intermediates, and further optimize reaction pathways. Herein, we report an atom manipulating process to synthesize Ni atoms stabilized on vanadium carbide (Ni_SA-VC) through a nanofiber-medium thermodynamically driven atomic migration strategy. Experimental and theoretical results systematically reveal the tunable migration pathway of Ni atom from Ni nanoparticles to neighboring N-doped carbon (NC) and finally to metal carbide that was obtained by regulating the competitive adsorption energies between VC and NC for capturing Ni atoms. For CO₂-to-CO electroreduction, Ni_SA-VC exhibits an industrial current density of -180 mA cm^-2 at -1.0 V vs reversible hydrogen electrode and the highest Faradaic efficiency for CO production (FE_CO) of 96.8% at -0.4 V vs RHE in a flow cell. Significant electron transfers occurring in Ni_SA-VC structures contribute to the activation of CO₂, facilitate the reaction free energy, regulate *CO desorption as the rate-determining step, and promote the activity and selectivity. This study provides an understanding on how to design powerful SACs for electrocatalysis.

Metal-oxide interactions modulating the activity of active oxygen species on atomically dispersed silver catalysts

The activity of active oxygen species on supported Ag atoms can be effectively modulated by metal-support interactions using different oxide supports. The strong interaction between Ag and Al₂O₃ with more electrons transferred from Ag to Al₂O₃ leads to the formation of more Ag-O₂^- (superoxide) species, responsible for the selective oxidation of ethylene to ethylene oxide. The relatively weak interaction between Ag and SiO₂ induces the generation of Ag-O (atomic oxygen) and Ag-O₂^2- (peroxide) species, which are more active for complete oxidation of CO and ethylene to CO₂. This work is of significance for deep understanding of active surface species in atomically dispersed metal catalysts.

Oxide-Metal Interaction Probed by Scanning Tunneling Microscope Manipulation of Cr2O7 Clusters on Au(111)

Interfacial interaction plays a crucial rule in catalysis over supported catalysts, and the catalyst-support interaction needs to be explored at microscopic scale. Here, we use the scanning tunneling microscope (STM) tip to manipulate Cr₂O₇ dinuclear clusters on Au(111) and find that the Cr₂O₇-Au interaction can be weakened by an electric field in the STM junction, facilitating rotation and translation of the individual clusters at the imaging temperature (78 K). Surface alloying with Cu makes the manipulation of the Cr₂O₇ clusters hard due to the enhanced Cr₂O₇-substrate interaction. Density functional theory calculations reveal that barrier for translation of a Cr₂O₇ cluster on the surface can be increased by surface alloying, influencing the tip manipulation. Our study demonstrates that the oxide-metal interfacial interaction can be probed by STM tip manipulation of supported oxide clusters, which provides a new method to investigate the interfacial interaction.

Interlayer Charge Transfer Regulates Single-Atom Catalytic Activity on Electride/Graphene 2D Heterojunctions

Single-atom catalysts with structure and activity tunability have attracted significant attention for energy and environmental applications. Herein we present a first-principles study of single-atom catalysis on two-dimensional graphene and electride heterostructures. The anion electron gas in the electride layer enables a colossal electron transfer to the graphene layer, with the degree of transfer being controllable by the selection of electride. The charge transfer tunes the d-orbital electron occupancy of a single metal atom, enhancing the catalytic activity of hydrogen evolution reactions and oxygen reduction reactions. The strong correlation between the adsorption energy E_ads and the charge variation Δq suggests that interfacial charge transfer is a critical catalytic descriptor for the heterostructure-based catalysts. The polynomial regression model proves the importance of charge transfer and accurately predicts the adsorption energy of ions and molecules. This study provides a strategy to obtain high-efficiency single-atom catalysts using two-dimensional heterostructures.

Role of the Support Effects in Single-Atom Catalysts

In recent years, single-atom catalysts (SACs) have received a significant amount of attention due to their high atomic utilization, low cost, high reaction activity, and selectivity for multiple catalytic reactions. Unfortunately, the high surface free energy of single atoms leads them easily migrated and aggregated. Therefore, support materials play an important role in the preparation and catalytic performance of SACs. Aiming at understanding the relationship between support materials and the catalytic performance of SACs, the support effects in SACs are introduced and reviewed herein. Moreover, special emphasis is placed on exploring the influence of the type and structure of supports on SAC catalytic performance through advanced characterization and theoretical research. Future research directions for support materials are also proposed, providing some insight into the design of SACs with high efficiency and high loading.

Single-Atom Catalysts on Covalent Triazine Frameworks: at the Crossroad between Homogeneous and Heterogeneous Catalysis

Heterogeneous single-site and single-atom catalysts potentially enable combining the high catalytic activity and selectivity of molecular catalysts with the easy continuous operation and recycling of solid catalysts. In recent years, covalent triazine frameworks (CTFs) found increasing attention as support materials for particulate and isolated metal species. Bearing a high fraction of nitrogen sites, they allow coordinating molecular metal species and stabilizing particulate metal species, respectively. Dependent on synthesis method and pretreatment of CTFs, materials resembling well-defined highly crosslinked polymers or materials comparable to structurally ill-defined nitrogen-containing carbons result. Accordingly, CTFs serve as model systems elucidating the interaction of single-site, single-atom and particulate metal species with such supports. Factors influencing the transition between molecular and particulate systems are discussed to allow deriving tailored catalyst systems.

Precisely designed Fex (x = 1-2) cluster nanocatalysts for effective nanocatalytic tumor therapy

Atomically dispersed metal clusters are considered as promising nanocatalysts due to their excellent physicochemical properties. Here, we report a novel strategy for precisely designing Fe_x (x = 1-2) cluster nanocatalysts (Fe₁-N-C and Fe₂-N-C) with dual catalytic activity, which can catalyze H₂O₂ into reactive oxygen species (ROS) and oxidize glutathione (GSH) into glutathione disulfide simultaneously. The adsorption energies of Fe-N sites in Fe₂-N-C for GSH and H₂O₂ intermediates were well controlled due to the orbital modulation of adjacent Fe sites, contributing to the higher dual catalytic activity compared to Fe₁-N-C. Additionally, tamoxifen (TAM) was loaded into Fe₂-N-C (Fe₂@TDF NEs) to down-regulate the intracellular pH for higher Fenton-like catalytic efficiency and ROS production. The generated ROS could induce apoptosis and lipid peroxidation, triggering ferroptosis. Meanwhile, upregulation of ROS and lipid peroxidation, along with GSH depletion and GPX4 downregulation could promote the apoptosis and ferroptosis of tumor cells. In addition, the lactic acid accumulation effect of TAM and the high photothermal conversion ability of Fe₂@TDF NEs could further enhance the catalytic activity to achieve synergistic antitumor effects. As a result, this work highlights the critical role of adjacent metal sites at the atomic-level and provides a rational guidance for the design and application of nanocatalytic antitumor systems.