Negative differential resistance as a critical indicator for the discharge capacity of lithium-oxygene batteries

Constructing an Interlaced Catalytic Surface via Fluorine-Doped Bimetallic Oxides for Oxygen Electrode Processes in Li-O2 Batteries

Lithium-oxygen (Li-O2) batteries, renowned for their high theoretical energy density, have garnered significant interest as prime candidates for future electric device development. However, their actual capacity is often unsatisfactory due to the passivation of active sites by solid-phase discharge products. Optimizing the growth and storage of these products is a crucial step in advancing Li-O2 batteries. Here, a fluorine-doped bimetallic cobalt-nickel oxide (CoNiO2- xFx/CC) with an interlaced catalytic surface (ICS) and a corncob-like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism," the ICS of CoNiO2- xFx/CC offers a "competitive adsorption catalytic mechanism," where oxygen sites facilitate oxygen conversion while fluorine sites contribute to the growth of Li2O2. This results in a change in Li2O2 morphology from a surface film to toroidal particles, effectively preventing the burial of active sites. Additionally, the unique open architecture aids in the capture and release of oxygen and the formation of well-contacted Li2O2/electrode interfaces, which benefits the complete decomposition of Li2O2 products. Consequently, the Li-O2 battery with a CoNiO2- xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g-1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide-based cathodes.

To DISP or Not? The Far-Reaching Reaction Mechanisms Underpinning Lithium-Air Batteries

The short history of research on Li-O2 batteries has seen a remarkable number of mechanistic U-turns over the years. From the initial use of carbonate electrolytes, that were then found to be entirely unsuitable, to the belief that (su)peroxide was solely responsible for degradation, before the more reactive singlet oxygen was found to form, to the hypothesis that capacity depends on a competing surface/solution mechanism before a practically exclusive solution mechanism was identified. Herein, we argue for an ever-fresh look at the reported data without bias towards supposedly established explanations. We explain how the latest findings on rate and capacity limits, as well as the origin of side reactions, are connected via the disproportionation (DISP) step in the (dis)charge mechanism. Therefrom, directions emerge for the design of electrolytes and mediators on how to suppress side reactions and to enable high rate and high reversible capacity.

Improved Tunneling Property of p+Si Nanomembrane/n+GaAs Heterostructures through Ultraviolet/Ozone Interface Treatment

Here, heterostructures composed of p+Si nanomembranes (NM)/n+GaAs were fabricated by ultraviolet/ozone (UV/O3, UVO) treatment, and their tunneling properties were investigated. The hydrogen (H)-terminated Si NM was bonded to the oxygen (O)-terminated GaAs substrate, leading to Si/GaAs tunnel junctions (TJs). The atomic-scale features of the H-O-terminated Si/GaAs TJ were analyzed and compared to those of Si/GaAs heterojunctions with no UVO treatment. The electrical characteristics demonstrated the emergence of negative differential resistance, with an average peak-to-valley current ratio of 3.49, which was examined based on the band-to-band tunneling and thermionic emission theories.

Revealing the Correlations between Morphological Evolution and Surface Reactivity of Catalytic Cathodes in Lithium-Oxygen Batteries

Lithium-oxygen batteries suffer from the degradation of the catalytic cathode during long-term operation, which limits their practical use. Understanding the direct correlations between the surface morphological evolution of catalytic cathodes at nanoscale and their catalytic activity during cycling has proved challenging. Here, using in situ electrochemical atomic force microscopy, the dynamic evolution of the Pt nanoparticles electrode in a working Li-O₂ battery and its effects on the Li-O₂ interfacial reactions are visualized. In situ views show that repeated oxidation-reduction cycles (ORCs) trigger the increase in the size of Pt nanoparticles, eventually causing the Pt nanoparticles to fall off the electrode. In 0-80 ORCs, the grown Pt nanoparticles promote the conversion of the Li-O₂ reaction route from the surface-mediated pathway to the solution-mediated pathway during discharging and significantly increase the discharge capacity. After 250 ORCs, accompanied by the part of the Pt nanoparticles detaching from the electrode, the nucleation potential of reaction product decreases, and the reaction dynamic slows down, which cause the performance to degrade. Modification of a proper amount of Au nanoparticle on the Pt nanoparticles electrode could improve its stability and maintain the high catalytic activity. These results provide a direct evidence for clarifying the correlations between morphological evolution and surface reactivity of catalytic cathodes during cycling, which is critical for developing high-performance catalysts.

Isotopic Depth Profiling of Discharge Products Identifies Reactive Interfaces in an Aprotic Li-O2 Battery with a Redox Mediator

Prior to the practical application of rechargeable aprotic Li-O₂ batteries, the high charging overpotentials of these devices (which inevitably cause irreversible parasitic reactions) must be addressed. The use of redox mediators (RMs) that oxidatively decompose the discharge product, Li₂O₂, is one promising solution to this problem. However, the mitigating effect of RMs is currently insufficient, and so it would be beneficial to clarify the Li₂O₂ reductive growth and oxidative decomposition mechanisms. In the present work, Nanoscale secondary ion mass spectrometry (Nano-SIMS) isotopic three-dimensional imaging and differential electrochemical mass spectrometry (DEMS) analyses of individual Li₂O₂ particles established that both growth and decomposition proceeded at the Li₂O₂/electrolyte interface in a system containing the Br^-/Br₃^- redox couple as the RM. The results of this study also indicated that the degree of oxidative decomposition of Li₂O₂ was highly dependent on the cell voltage. These data show that increasing the RM reaction rate at the Li₂O₂/electrolyte interface is critical to improve the cycle life of Li-O₂ batteries.

In situ Construction of Robust Biphasic Surface Layers on Lithium Metal for Lithium-Sulfide Batteries with Long Cycle Life

Lithium-sulfur (Li-S) batteries have potential in high energy density battery systems. However, intermediates of lithium polysulfides (LiPSs) can easily shuttle to the Li anode and react with Li metal to deplete the active materials and cause rapid failure of the battery. A facile solution pretreatment method for Li anodes involving a solution of metal fluorides/dimethylsulfoxide was developed to construct robust biphasic surface layers (BSLs) in situ. The BSLs consist of lithiophilic alloy (Li_x M) and LiF phases on Li metal, which inhibit the shuttle effect and increase the cycle life of Li-S batteries. The BSLs allow Li⁺ transport and they inhibit dendrite growth and shield the Li anodes from corrosive reaction with LiPSs. Li-S batteries containing BSLs-Li anodes demonstrate excellent cycling over 1000 cycles at 1 C and simultaneously maintain a high coulombic efficiency of 98.2 %. Based on our experimental and theoretical results, we propose a strategy for inhibition of the shuttle effect that produces high stability Li-S batteries.

Synergistic Effect of Binary Electrolyte on Enhancement of the Energy Density in Li-O2 Batteries

Enhancement of the discharge capacity of lithium-oxygen batteries (LOBs) while maintaining a high cell voltage is an important challenge to overcome to achieve an ideal energy density. Both the cell voltage and discharge capacity of an LOB could be controlled by employing a binary solvent electrolyte composed of dimethyl sulfoxide (DMSO) and acetonitrile (MeCN), whereby an energy density 3.2 times higher than that of the 100 vol % DMSO electrolyte was obtained with an electrolyte containing 50 vol % of DMSO. The difference in the solvent species that preferentially solvates Li⁺ and that which controls the adsorption-desorption equilibrium of the discharge reaction intermediate, LiO₂, on the cathode/electrolyte interface provides these unique properties of the binary solvent electrolyte. Combined spectroscopic and electrochemical analysis have revealed that the solvated complex of Li⁺ and the environment of the cathode/electrolyte interface were the determinants of the cell voltage and discharge capacity, respectively.