N-formyl-stabilizing quasi-catalytic species afford rapid and selective solvent-free amination of biomass-derived feedstocks

Furan Distribution as a Severity Indicator upon Organosolv Fractionation of Hardwood Sawdust through a Novel Ternary Solvent System

Beech sawdust was treated with a ternary solvent system based on binary aqueous ethanol with partial substitution of ethanol by acetone at four different water contents (60, 50, 40, and 30%v/v). In addition to standard, i.e., noncatalyzed treatments, the application of inorganic acid in the form of 20 mm H2SO4 was evaluated. The various solvent systems were applied at 180 °C for 60 min. The obtained biomass fractions were characterized by standard biomass compositional methods, i.e., sugar monomer and oligomer contents, dehydration product contents of the aqueous product, and lignin, cellulose, and hemicellulose contents in isolated solid fractions. More advanced analyses were performed on the lignin fractions, including quantitative 13C NMR analyses, 1H-13C HSQC analysis, size exclusion chromatography, and pyrolysis-GC/MS, and the aqueous product, in the form of size exclusion chromatography and determination of total phenol contents. The picture emerging from the thorough analytical investigation performed on the lignin fractions is consistent with that resulting from the characterization of the other fractions: results point toward greater deconstruction of the lignocellulosic recalcitrance upon higher organic solvent content, replacing ethanol with acetone during the extraction, and upon addition of mineral acid. A pulp with cellulose content of 94.23 wt % and 95% delignification was obtained for the treatment employing a 55/30/15 EtOH/water/acetone mixture alongside 20 mm H2SO4. Furthermore, the results indicate the formation of two types of organosolv furan families during treatment, which differ in the substitution of their C1 and C5. While the traditional lignin aryl-ether linkages present themselves as indicators for process severity for the nonacid catalyzed systems, the distribution of these furan types can be applied as a severity indicator upon employment of H2SO4, including their presence in the isolated lignin fractions.

Reductive Amination of Levulinic Acid to Pyrrolidones: Key Step in Biomass Valorization towards Nitrogen-Containing Chemicals

Nowadays, the field of biomass conversion is gradually moving towards an encouraging stage. The preparation of nitrogen-containing chemicals using various biomass resources instead of fossil resources do not only reduce carbon emissions, but also diversify the products of biomass conversion, thus increasing the economic competitiveness of biomass refining systems. Levulinic acid (LA) can be used as a promising intermediate in biomass conversion for further synthesis of pyrrolidone via reductive amination. However, there are still many critical issues to be solved. Particularly, the specific effects of catalysts on the performance of LA reductive amination have not been sufficiently revealed, and the potential impacts of key conditional factors have not been clearly elucidated. In view of this, this review attempts to provide theoretical insights through an in-depth interpretation of the above key issues. The contribution of catalysts to the reductive amination of LA as well as the catalyst structural preferences for improving catalytic performance are discussed. In addition, the role of key conditional factors is discussed. The insights presented in this review will contribute to the design of catalyst nanostructures and the rational configuration of green reaction conditions, which may provide inspiration to facilitate the nitrogen-related transformation of more biomass platform molecules.

Photocatalytic C-N bond construction toward high-value nitrogenous chemicals

The construction of carbon-nitrogen bonds is vital for producing versatile nitrogenous compounds for the chemical and pharmaceutical industries. Among developed synthetic approaches to nitrogenous chemicals, photocatalysis is particularly prominent and has become one of the emerging fields due to its unique advantages of eco-sustainable characteristics, efficient process integration, no need for high-pressure H2, and tunable synthesis methods for developing advanced photocatalytic materials. Here, the review focuses on potential photocatalytic protocols developed for the construction of robust carbon-nitrogen bonds in discrepant activation environments to produce high-value nitrogenous chemicals. The photocatalytic C-N bond construction strategies and involved reaction mechanisms are elucidated.

Synthesis and characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres for potential application as a promising catalyst for nitrophenol reduction

Nitrophenols, which are defined as an important toxic and carcinogenic pollutant in agricultural and industrial wastewater due to their solubility in water, form of resistance against all organisms in water resources. It is vital that these compounds, which are highly toxic as well as highly explosive, are removed from the aquatic ecosystem. In this paper, we reported the preparation and advanced characterization of Pd0 nanoparticles supported over hydroxyapatite nanospheres (Pd0@nano-HAp). The catalytic efficiency of the Pd0@nano-HAp catalyst was examined in the reduction of nitrophenols in water in the presence of NaBH4 as reducing agent and the great activity of catalyst have been specified against 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol and 2,4,6-trinitrophenol compounds with 70.6, 82.4, 27.6 and 41.4 min-1 TOFinitial values, respectively. Another important point is that the Pd0@nano-HAp catalyst has perfect reusability performance (at 5th reuse between 68.5 and 92.8 %) for the reduction of nitrophenols. In addition, catalytic studies were carried out at different temperatures in order to determine thermodynamic parameters such as Ea, ΔH≠ and ΔS≠.

Three-Component Electrochemical Aminoselenation of 1,3-Dienes

Azoles and organoselenium compounds are pharmacologically important scaffolds in medicinal chemistry and natural products. We developed an efficient regioselective electrochemical aminoselenation reaction of 1,3-dienes, azoles, and diselenide derivatives to access selenium-containing allylazoles skeletons. This protocol is more economical and environmentally friendly and features a broad substrate scope; pyrazole, triazole, and tetrazolium were all tolerated under the standard conditions, which could be applied to the expedient synthesis of bioactive molecules and in the pharmaceutical industry.

Oxidative C−C bond cleavage of lignin via electrocatalysis

Lignin, which is an important component of biomass in nature and is constantly produced in industry, becomes potential raw material for sustainable production of fine chemicals and biofuels. Electrocatalysis has been extensively involved in the activation of simple molecules and cleavage-recasting of complex scaffolds in an elegant environment. As such, electrocatalytic cleavage of C−C(O) in β-O-4 model molecules of lignin to value-added chemicals has received much attention in recent years. This mini-review introduces various anodes (e.g., Pb, Pt, Ni, Co., and Ir) developed for electro-oxidative lignin degradation (EOLD) under mild conditions. Attention was placed to understand the conversion pathways and involved reaction mechanisms during EOLD, with emphasis on the product distribution caused by different electrodes.

Sustainable Approaches to Selective Conversion of Cellulose Into 5-Hydroxymethylfurfural Promoted by Heterogeneous Acid Catalysts: A Review

5-Hydroxymethylfurfural (5-HMF) as a triply catalytic product is a value-added refining chemical in industry production. 5-HMF as biomass feedstock enables to be transformed into other high-value industrial compounds, such as 2,5-furandicarboxylic acid (FDCA), 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), 5-formyl-2-furancarboxylic acid (FFCA), 2,5-diformylfuran (DFF), 2,5-bis(aminomethyl)furan (BAMF), and 2,5-dimethylfuran (DMF). Hence, catalytic conversion of biomass into 5-HMF has been given much more attention by chemists. In this review, some latest studies about the conversion of cellulose to 5-HMF have been introduced systematically. Solid acids such as heterogeneous catalysts have been widely applied in the conversion of cellulose into 5-HMF. Therefore, some novel solid acids with Brønsted and/or Lewis acidic sites, such as sulfonated solid acids, carbon-based acids, and zeolite particles employed for biomass conversions are listed.

Research Progress on the Photo-Driven Catalytic Production of Biodiesel

Biodiesel considered a green, environmentally friendly, and renewable energy source is one of the most promising candidates to replace fossil fuels to supply energy for the world. The conventional thermocatalytic methods have been extensively explored for producing biodiesel, while inevitably encountering some drawbacks, such as harsh operating conditions and high energy consumption. The catalytic production of biodiesel under mild conditions is a research hotspot but with difficulty. Photocatalysis has recently been highlighted as an eco-friendly and energy-saving approach for biodiesel production. This mini-review summarizes typical photocatalysts for biodiesel production and discusses in detail the catalytic mechanism and strategies of the photo-driven (trans)esterification to produce biodiesel. The current challenges and future opportunities of photo-driven catalysis to prepare biodiesel are also outlined, in steps towards guiding the design of advanced photocatalysts for biodiesel production.

Cascade Upgrading of Biomass-Derived Furfural to γ-Valerolactone Over Zr/Hf-Based Catalysts

Biomass feedstocks are promising candidates of renewable clean energy. The development and utilization of biological energy is in line with the concept of sustainable development and circular economy. As an important platform chemical, γ-valerolactone (GVL) is often used as green solvent and biofuel additive. Regarding this, the efficient synthesis of GVL from biomass derivative furfural (FF) has attracted wide attention recently, However, suitable catalyst with appropriate acid-base sites is required due to the complex reaction progress. In this Mini Review, the research progress of catalytic synthesis of GVL from furfural by Zr/Hf-based catalysts was reviewed. The different effects of Lewis acid-base and Brønsted acid sites in the catalysts on each steps in the reaction process were discussed firstly. Then the effects of regulation of acid-base sites in the catalysts was also studied. Finally, the advantages and challenges of Zr/Hf-based catalysts in FF converted to GVL system were proposed.

The mechanism of direct reductive amination of aldehyde and amine with formic acid catalyzed by boron trifluoride complexes: insights from a DFT study

A volcano diagram of BF3 catalytic species and their activities was proposed for the DRA of aldehyde and amine with formic acid.

Magnetic solid sulfonic acid-enabled direct catalytic production of biomass-derived N-substituted pyrroles

Five-membered nitrogen heterocyclic pyrroles have extremely high physiological activity and are widely used in medicine, agriculture, material chemistry, industry, and supramolecular chemistry. Developing a mild and eco-friendly way to synthesize...

Nanoparticles and single atoms of cobalt synergistically enabled low-temperature reductive amination of carbonyl compounds

Low-temperature and selective reductive amination of carbonyl compounds is a highly promising approach to access primary amines. However, it remains a great challenge to conduct this attractive route efficiently over earth-abundant metal-based catalysts. Herein, we designed several Co-based catalysts (denoted as Co@C–N(x), where x represents the pyrolysis temperature) by the pyrolysis of the metal–organic framework ZIF-67 at different temperatures. Very interestingly, the prepared Co@C–N(800) could efficiently catalyze the reductive amination of various aldehydes/ketones to synthesize the corresponding primary amines with high yields at 35 °C. Besides non-noble metal and mild temperature, the other unique advantage of the catalyst was that the substrates with different reduction-sensitive groups could be converted into primary amines selectively because the Co-based catalyst was not active for these groups at low temperature. Systematic analysis revealed that the catalyst was composed of graphene encapsulated Co nanoparticles and atomically dispersed Co–N_x sites. The Co particles promoted the hydrogenation step, while the Co–N_x sites acted as acidic sites to activate the intermediate (Schiff base). The synergistic effect of metallic Co particles and Co–N_x sites is crucial for the excellent performance of the catalyst Co@C–N(800). To the best of our knowledge, this is the first study on efficient synthesis of primary amines via reductive amination of carbonyl compounds over earth-abundant metal-based catalysts at low temperature (35 °C).

An earth-abundant Co-based catalyst, Co@C–N(800), could efficiently catalyze the reductive amination of carbonyl compounds into primary amines at 35 °C owing to the synergistic effect of Co nanoparticles and atomically dispersed Co–N_x sites.

Advances in Diels-Alder/aromatization of biomass furan derivatives towards renewable aromatic hydrocarbons

The effective upgrading of renewable resources into high value-added chemicals is of great significance to achieve the sustainable economic development, as well as the implementation of carbon neutral technologies practically....

Homogeneous Catalyzed Valorization of Furanics: A Sustainable Bridge to Fuels and Chemicals

The development of efficient biomass valorization is imperative for the future sustainable production of chemicals and fuels. Particularly, the last decade has witnessed the development of a plethora of effective and selective transformations of bio-based furanics using homogeneous organometallic catalysis under mild conditions. In this review, we describe some of the advances regarding the conversion of target furanics into value chemicals, monomers for high-performance polymers and materials, and pharmaceutical key intermediates using homogeneous catalysis. Finally, the incorporation of furanic skeletons into complex chemical architectures by multifunctionalization routes is also described.

Base-Free Synthesis of Furfurylamines from Biomass Furans Using Ru Pincer Complexes

We report the first example of employing homogeneous organometal-catalyzed transfer hydrogenation for the selective reductive amination of furfurals to furfurylamines. An efficient, chemoselective, and base-free method is described using Ru-MACHO-BH as catalyst and iPrOH as H donor. The method tolerates a range of substituents affording moderate to excellent yields.

Production of aromatic amines via catalytic co-pyrolysis of lignin and phenol-formaldehyde resins with ammonia over commercial HZSM-5 zeolites

Aromatic amines could be produced from organic wastes via catalytic pyrolysis with ammonia that served not only as a carrier gas but also as a reactant. Aromatic amines of 14.2 C% with selectivity of 57.6% were obtained from phenol-formaldehyde resins via pyrolysis over commercial HZSM-5-3 zeolite (Si/Al ratio of 80) catalyst at 650 °C. Significant synergetic effects have been observed when lignin was added, which improved aromatic amines yield by 32.2% to 11.8 C% at the mixing weight ratio of lignin to PF resins of 1:1. HZSM-5-3 was slightly deactivated after 3 cycles with acid sites loss. Catalytic co-pyrolysis of plastics and biomass wastes is a fast and effective method to produce aromatic amines.

The Increasing Value of Biomass: Moving From C6 Carbohydrates to Multifunctionalized Building Blocks via 5-(hydroxymethyl)furfural

Recent decades have been marked by enormous progress in the field of synthesis and chemistry of 5-(hydroxymethyl)furfural (HMF), an important platform chemical widely recognized as the "sleeping giant" of sustainable chemistry. This multifunctional furanic compound is viewed as a strong link for the transition from the current fossil-based industry to a sustainable one. However, the low chemical stability of HMF significantly undermines its synthetic potential. A possible solution to this problem is synthetic diversification of HMF by modifying it into more stable multifunctional building blocks for further synthetic purposes.

Visible-light-driven amino acids production from biomass-based feedstocks over ultrathin CdS nanosheets

Chemical synthesis of amino acids from renewable sources is an alternative route to the current processes based on fermentation. Here, we report visible-light-driven amination of biomass-derived α-hydroxyl acids and glucose into amino acids using NH₃ at 50 °C. Ultrathin CdS nanosheets are identified as an efficient and stable catalyst, exhibiting an order of magnitude higher activity towards alanine production from lactic acid compared to commercial CdS as well as CdS nanoobjects bearing other morphologies. Its unique catalytic property is attributed mainly to the preferential formation of oxygen-centered radicals to promote α-hydroxyl acids conversion to α-keto acids, and partially to the poor H₂ evolution which is an undesired side reaction. Encouragingly, a number of amino acids are prepared using the current protocol, and one-pot photocatalytic conversion of glucose to alanine is also achieved. This work offers an effective catalytic system for amino acid synthesis from biomass feedstocks under mild conditions.

Integrating Biomass into the Organonitrogen Chemical Supply Chain: Production of Pyrrole and d-Proline from Furfural

Production of renewable, high-value N-containing chemicals from lignocellulose will expand product diversity and increase the economic competitiveness of the biorefinery. Herein, we report a single-step conversion of furfural to pyrrole in 75 % yield as a key N-containing building block, achieved via tandem decarbonylation-amination reactions over tailor-designed Pd@S-1 and H-beta zeolite catalytic system. Pyrrole was further transformed into dl-proline in two steps following carboxylation with CO₂ and hydrogenation over Rh/C catalyst. After treating with Escherichia coli, valuable d-proline was obtained in theoretically maximum yield (50 %) bearing 99 % ee. The report here establishes a route bridging commercial commodity feedstock from biomass with high-value organonitrogen chemicals through pyrrole as a hub molecule.

CO2 -Enabled Biomass Fractionation/Depolymerization: A Highly Versatile Pre-Step for Downstream Processing

Lignocellulosic biomass is inevitably subject to fractionation and depolymerization processes for enhanced selectivity toward specific products, in most cases prior to catalytic upgrading of the three main fractions-cellulose, hemicellulose, and lignin. Among the developed pretreatment techniques, CO₂ -assisted biomass processing exhibits some unique advantages such as the lowest critical temperature (31.0 °C) with moderate critical pressure, low cost, nontoxicity, nonflammability, ready availability, and the addition of acidity, alongside easy recovery by pressure release. This Review showcases progress in the study of sub- or supercritical CO₂ -mediated thermal processing of lignocellulosic biomass-the key pre-step for downstream conversion processes. The auxo-action of CO₂ in biomass pretreatment and fractionation, along with the involved variables, direct degradation of untreated biomass in CO₂ by gasification, pyrolysis, and liquefaction with relevant conversion mechanisms, and CO₂ -enabled depolymerization of lignocellulosic fractions with representative reaction pathways are summarized. Moreover, future prospects for the practical application of CO₂ -assisted up- and downstream biomass-to-bioproduct conversion are also briefly discussed.

Functionalized Metal-Organic Framework Catalysts for Sustainable Biomass Valorization

Currently, pristine and functionalized metal-organic frameworks (MOFs) are introduced in heterogeneous catalysis for biomass upgrading owing to the specific texture properties including regular higher-order structure, high specific surface area, and the precisely tailored diversity. The purpose of this review is to afford a comprehensive discussion of the most applications in biomass refinery. We highlight recently developed four types of MOFs like pristine MOFs and their composites, MOF-supported metal NPs, acid-functionalized MOFs, and biofunctionalized MOFs for production of green, sustainable, and industrially acceptable biomass-derived platform molecules: (1) upgrading of saccharides, (2) upgrading of furan derivatives, and (3) upgrading of other biobased compounds.

Efficient Transfer Hydrogenation of Nitro Compounds to Amines Enabled by Mesoporous N-Stabilized Co-Zn/C

N-doped metal materials with enhanced stability and abundant porosity have attracted tremendous attention in catalytic reactions. Herein, a simple solvothermal approach was demonstrated to significantly enlarge the pore dimension of conventional microporous zeolitic imidazolate framework (ZIF) incorporated with two kinds of central metals (Co, Zn), while maintaining the original ZIF crystal morphology. Upon further pyrolysis, the resulting mesoporous Co-Zn/N-C material could possess the highly dispersed metal particle on the N-doped carbon, with satisfactory pore volume and surface area. The partial vaporization of Zn and the stabilizing effect of N, illustrated by XRD, HRTEM, HAADF-STEM with mapping, SEM, Raman Spectrum, BET, and TGA, were able to remarkably increase the accessibility of substrate toward active sites and prevent the aggregation of metal particles, respectively. Under mild reaction conditions, the N-stabilized Co-Zn/N-C exhibited good activity and selectivity in transfer hydrogenation of various nitro compounds to corresponding amines, where a synergistic role among Co, Zn, and N was responsible for its superior performance to other tested catalysts. In addition, the N-doped non-noble metal/carbon heterogeneous catalyst was fairly stable and could be reused several times without obvious deactivation.

A Facile Direct Route to N-(Un)substituted Lactams by Cycloamination of Oxocarboxylic Acids without External Hydrogen

Lactams are privileged in bioactive natural products and pharmaceutical agents and widely featured in functional materials. This study presents a novel versatile approach to the direct synthesis of lactams from oxocarboxylic acids without catalyst or external hydrogen. The method involves the in situ release of formic acid from formamides induced by water to facilitate efficient cycloamination. Water also suppresses the formation of byproducts. This unconventional pathway is elucidated by a combination of model experiments and density functional theory calculations, whereby cyclic imines (5-methyl-3,4-dihydro-2-pyrrolone and its tautomeric structures) are found to be favorable intermediates toward lactam formation, in contrast to the conventional approach encompassing cascade reductive amination and cyclization. This sustainable and simple protocol is broadly applicable for the efficient production of various N-unsubstituted and N-substituted lactams.