Tuning infrared plasmon resonances in doped metal-oxide nanocrystals through cation-exchange reactions

Cation Exchange in Colloidal Transition Metal Nitride Nanocrystals

Transition metal nitride (TMN)-based nanostructures have emerged as promising materials for diverse applications in electronics, photonics, energy storage, and catalysis due to their highly desirable physicochemical properties. However, synthesizing TMN-based nanostructures with designed compositions and morphologies poses challenges, especially in the solution phase. The cation exchange reaction (CER) stands out as a versatile postsynthetic strategy for preparing nanostructures that are otherwise inaccessible through direct synthesis. Nevertheless, exploration of the CER in TMNs lags behind that in metal chalcogenides and metal phosphides. Here, we demonstrate cation exchange in colloidal metal nitride nanocrystals, employing Cu3N nanocrystals as starting materials to synthesize Ni4N and CoN nanocrystals. By controlling the reaction conditions, Cu3N@Ni4N and Cu3N@CoN core@shell heterostructures with tunable compositions can also be obtained. The Ni4N and CoN nanocrystals are evaluated as catalysts for the electrochemical oxygen evolution reaction (OER). Remarkably, CoN nanocrystals demonstrate superior OER performance with a low overpotential of 286 mV at 10 mA·cm-2, a small Tafel slope of 89 mV·dec-1, and long-term stability. Our CER approach in colloidal TMNs offers a new strategy for preparing other metal nitride nanocrystals and their heterostructures, paving the way for prospective applications.

Nanocrystals as performance-boosting materials for solar cells

Nanocrystals (NCs) have been widely studied owing to their distinctive properties and promising application in new-generation photoelectric devices. In photovoltaic devices, semiconductor NCs can act as efficient light harvesters for high-performance solar cells. Besides light absorption, NCs have shown great significance as functional layers for charge (hole and electron) transport and interface modification to improve the power conversion efficiency and stability of solar cells. NC-based functional layers can boost hole/electron transport ability, adjust energy level alignment between a light absorbing layer and charge transport layer, broaden the absorption range of an active layer, enhance intrinsic stability, and reduce fabrication cost. In this review, recent advances in NCs as a hole transport layer, electron transport layer, and interfacial layer are discussed. Additionally, NC additives to improve the performance of solar cells are demonstrated. Finally, a summary and future prospects of NC-based functional materials in solar cells are presented, addressing their limitations and suggesting potential solutions.

Resolving Multielement Semiconductor Nanocrystals at the Atomic Level: Complete Deciphering of Domains and Order in Complex CuαZnβSnγSeδ (CZTSe) Tetrapods

Semiconductor nanocrystals (NCs) with high elemental and structural complexity can be engineered to tailor for electronic, photovoltaic, thermoelectric, and battery applications etc. However, this greater complexity causes ambiguity in the atomic structure understanding. This in turn hinders the mechanistic studies of nucleation and growth, the theoretical calculations of functional properties, and the capability to extend functional design across complementary semiconductor nanocrystals. Herein, we successfully deciphered the atomic arrangements of 4 different nanocrystal domains in CuαZnβSnγSeδ (CZTSe) nanocrystals using crucial zone axis analysis on multiple crystals in different orientations. The results show that the essence of crystallographic progression from binary to multielemental semiconductors is actually the change of theoretical periodicity. This transition is caused by decreased symmetry in the crystal instead of previously assumed crystal deformation. We further reveal that these highly complex crystalline entities have highly ordered element arrangements as opposed to the previous understanding that their elemental orderings are random.

Key Factors for Controlling Plasmon-Induced Chemical Reactions on Metal Surfaces

Plasmon-induced chemical reactions based on direct interactions between the plasmons of metal nanostructures and molecules have attracted increasing attention as a means of efficiently utilizing sunlight. In recent years, achievements in complex synthetic reactions as well as simple dissociation reactions of gaseous molecules using plasmons have been reported. However, recent research progress has revealed that multiple factors govern plasmon-induced chemical reactions. This perspective provides an overview of the key factors that influence plasmon-induced chemical reactions on metal surfaces and discusses the difficulty of controlling the reactions, which is caused by the entanglement of the key factors. A strategy for designing plasmonic metal catalysts to achieve the desired reactions is also discussed based on the current understanding, and directions for further research are provided.

Emerging Schemes for Advancing 2D Material Photoconductive-Type Photodetectors

By virtue of the widely tunable band structure, dangling-bond-free surface, gate electrostatic controllability, excellent flexibility, and high light transmittance, 2D layered materials have shown indisputable application prospects in the field of optoelectronic sensing. However, 2D materials commonly suffer from weak light absorption, limited carrier lifetime, and pronounced interfacial effects, which have led to the necessity for further improvement in the performance of 2D material photodetectors to make them fully competent for the numerous requirements of practical applications. In recent years, researchers have explored multifarious improvement methods for 2D material photodetectors from a variety of perspectives. To promote the further development and innovation of 2D material photodetectors, this review epitomizes the latest research progress in improving the performance of 2D material photodetectors, including improvement in crystalline quality, band engineering, interface passivation, light harvesting enhancement, channel depletion, channel shrinkage, and selective carrier trapping, with the focus on their underlying working mechanisms. In the end, the ongoing challenges in this burgeoning field are underscored, and potential strategies addressing them have been proposed. On the whole, this review sheds light on improving the performance of 2D material photodetectors in the upcoming future.

Amorphization-Induced Cation Exchange in Indium Oxide Nanosheets for CO2-to-Ethanol Conversion

Cation exchange (CE) in metal oxides under mild conditions remains an imperative yet challenging goal to tailor their composition and enable practical applications. Herein, we first develop an amorphization-induced strategy to achieve room-temperature CE for universally synthesizing single-atom doped In2O3 nanosheets (NSs). Density functional theory (DFT) calculations elucidate that the abundant coordination-unsaturated sites present in a-In2O3 NSs are instrumental in surmounting the energy barriers of CE reactions. Empirically, a-In2O3 NSs as the host materials successfully undergo exchange with unary cations (Cu2+, Co2+, Mn2+, Ni2+), binary cations (Co2+Mn2+, Co2+Ni2+, Mn2+Ni2+), and ternary cations (Co2+Mn2+Ni2+). Impressively, high-loading single-atom doped (over 10 atom %) In2O3 NSs were obtained. Additionally, Cu/a-In2O3 NSs exhibit an excellent ethanol yield (798.7 μmol g-1 h-1) with a high selectivity of 99.5% for the CO2 photoreduction. This work offers a new approach to induce CE reactions in metal oxides under mild conditions and constructs scalable single-atom doped catalysts for critical applications.

Resonant-Cavity-Enhanced Electrochromic Materials and Devices

With rapid advances in optoelectronics, electrochromic materials and devices have received tremendous attentions from both industry and academia for their strong potentials in wearable and portable electronics, displays/billboards, adaptive camouflage, tunable optics, and intelligent devices, etc. However, conventional electrochromic materials and devices typically present some serious limitations such as undesirable dull colors, and long switching time, hindering their deeper development. Optical resonators have been proven to be the most powerful platform for providing strong optical confinement and controllable lightmatter interactions. They generate locally enhanced electromagnetic near-fields that can convert small refractive index changes in electrochromic materials into high-contrast color variations, enabling multicolor or even panchromatic tuning of electrochromic materials. Here, resonant-cavity-enhanced electrochromic materials and devices, an advanced and emerging trend in electrochromics, are reviewed. In this review, w e will focus on the progress in multicolor electrochromic materials and devices based on different types of optical resonators and their advanced and emerging applications, including multichromatic displays, adaptive visible camouflage, visualized energy storage, and applications of multispectral tunability. Among these topics, principles of optical resonators, related materials/devices and multicolor electrochromic properties are comprehensively discussed and summarized. Finally, the challenges and prospects for resonant-cavity-enhanced electrochromic materials and devices are presented.

All-inorganic lead halide perovskite nanocrystals applied in advanced display devices

Advanced display devices are in greater demand due to their large color gamut, high color purity, ultrahigh visual resolution, and small size pixels. All-inorganic lead halide perovskite (AILHP) nanocrystals (NCs) possess inherent advantages such as narrow emission width, saturated color, and flexible integration, and have been developed as functional films, light sources, backlight components, and display panels. However, some drawbacks still restrict the practical application of advanced display devices based on AILHP NCs, including working stability, large-scale synthesis, and cost. In this review, we focus on AILHP NCs, review the recent progress in materials synthesis, stability improvement, patterning techniques, and device application. We also highlight the important role of materials systems in creating advanced display devices, followed by the challenges and opportunities in industrial processes. This review provides beneficial inspiration for the future development of AILHP NCs in colorful and white backlight, as well as high resolution full-color displays.

Remarkable Electrical Conductivity Increase and Pure Metallic Properties from Semiconducting Colloidal Nanocrystals by Cation Exchange for Solution-Processable Optoelectronic Applications

The authors report a strategic approach to achieve metallic properties from semiconducting CuFeS colloidal nanocrystal (NC) solids through cation exchange method. An unprecedentedly high electrical conductivity is realized by the efficient generation of charge carriers onto a semiconducting CuS NC template via minimal Fe exchange. An electrical conductivity exceeding 10 500 S cm^-1 (13 400 S cm^-1 at 2 K) and a sheet resistance of 17 Ω/sq at room temperature, which are among the highest values for solution-processable semiconducting NCs, are achieved successfully from bornite-phase CuFeS NC films possessing 10% Fe atom. The temperature dependence of the corresponding films exhibits pure metallic characteristics. Highly conducting NCs are demonstrated for a thermoelectric layer exhibiting a high power factor over 1.2 mW m^-1 K^-2 at room temperature, electrical wires for switching on light emitting diods (LEDs), and source-drain electrodes for p- and n-type organic field-effect transistors. Ambient stability, eco-friendly composition, and solution-processability further validate their sustainable and practical applicability. The present study provides a simple but very effective method for significantly increasing charge carrier concentrations in semiconducting colloidal NCs to achieve metallic properties, which is applicable to various optoelectronic devices.

Quantifiable Regulation of Chemical Kinetics Barriers for Creation of Single-Atom Metal Sites on Photocatalytic Atomic Layers

Cation exchange (CE) under mild conditions promises a facile strategy to anchor single metal sites on colloidal chalcogenides toward catalytic applications, which however has seldom been demonstrated. The dilemma behind this is the rapid kinetics and high efficiency of the reaction disfavoring atomic dispersion of the metal species. Here we report that a fine-tuning of the affinity between the incoming metal cations and the deliberately introduced ligands can be exploited to manipulate the kinetics of the CE reaction, in a quantitative and systematic manner defined by the Tolman electronic parameter of the ligands used. Moreover, the steric effect of metal-ligand complexes offers thermodynamic preference for spatial isolation of the metal atoms. These thereby allow the rational construction of single atom catalysts (SACs) via simple one-step CE reactions, as exemplified by the CE-derived incorporation of single metal atoms (M = Cu, Ag, Au, Pd) on SnS₂ two-unit-cell layers through M-S coordination.

Lotus leaf mastoid inspired Ag micro/nanoarrays on PDMS film as flexible SERS sensor for in-situ analysis of pesticide residues on nonplanar surfaces

Conventional surface-enhanced Raman scattering (SERS) molecular detection are based on hard and brittle substrate, which are not suitable for in-situ detection of analytes adsorbed on nonplanar surfaces. Here, we report a simple biomimetic synthesis method to fabricate lotus leaf mastoid structured AgNPs micro/nanoarrays as reliable SERS substrate. By ideal replicating mastoid structure of lotus leaf into a flexible and transparent PDMS film, followed by depositing plasmonic AgNPs, a powerful chemical sensor with high sensitivity and multiplex detecting capability is demonstrated. The employ of periodic mastoid structure array endows the sensor with high signal repeatability (RSD ∼ 8.6 %), solving the general repeatability problem of SERS substrates. In addition, the detailed designed flexible and transparent PDMS substrate is capable of identifying trace analytes on curved surfaces with excellent durability. In the proof-of-concept experiment, a limit of detection (LOD) of (10^-5 M to 10^-7 M) was achieved on a portable Raman device for three common pesticides residues (thiram, fonofos and triadophos) on dendrobium leaves and stem according to the molecular fingerprint, indicating its excellent in-situ detection capability. Further, the multiplex detection ability of the Ag/PDMS film is also demonstrated by analyzing the mixture of four typical analytes. Benefiting from its high signal uniformity, this flexible Ag/PDMS substrate also showed good quantitative detection capabilities.

Carrier density tuning in CuS nanoparticles and thin films by Zn doping via ion exchange

Copper sulphide (covellite) nanoplatelets have recently emerged as a plasmonic platform in the near-infrared with ultrafast nonlinear optical properties. Here we demonstrate that the free-carrier density in CuS, which is an order of magnitude lower than in traditional plasmonic metals, can be further tuned by chemical doping. Using ion exchange to replace Cu with an increasing content of Zn in the nanoparticles, the free-hole density can be lowered, resulting in a long-wavelength shift of the localised plasmon resonances from 1250 nm to 1750 nm. The proposed approach provides new opportunities for tuning the plasmonic response of covellite nanocrystals as well as the carrier relaxation time which decreases for lower free-carrier densities.

Elevating Surface-Enhanced Infrared Absorption with Quantum Mechanical Effects of Plasmonic Nanocavities

Plasmonic nanocavities, with the ability to localize and concentrate light into nanometer-scale dimensions, have been widely used for ultrasensitive spectroscopy, biosensing, and photodetection. However, as the nanocavity gap approaches the subnanometer length scale, plasmonic enhancement, together with plasmonic enhanced optical processes, turns to quenching because of quantum mechanical effects. Here, instead of quenching, we show that quantum mechanical effects of plasmonic nanocavities can elevate surface-enhanced infrared absorption (SEIRA) of molecular moieties. The plasmonic nanocavities, nanojunctions of gold and cadmium oxide nanoparticles, support prominent mid-infrared plasmonic resonances and enable SEIRA of an alkanethiol monolayer (CH₃(CH₂)_n-1SH, n = 3-16). With a subnanometer cavity gap (n < 6), plasmonic resonances turn to blue shift and the SEIRA signal starts a pronounced increase, benefiting from the quantum tunneling effect across the plasmonic nanocavities. Our findings demonstrate the new possibility of optimizing the field enhancement and SEIRA sensitivity of mid-infrared plasmonic nanocavities.

Multifunctional Sensors Based on Doped Indium Oxide Nanocrystals

There is an increasing need for multifunctional sensors that can detect radiation, biological activity, gas, etc. for efficient health monitoring, neurological medical devices, and human-machine interfaces in recent years. Herein, we demonstrated a multifunctional Sn-doped In₂O₃ nanocrystal (ITO NC) based device for ulyoutraviolet (UV)/infrared (IR) dual-band photodetection and light-activated efficient nitrogen dioxide (NO₂) gas sensing at room temperature (RT). The effects of different surface ligands and annealing process of ITO NCs on their photodetection performance were investigated. The ITO NCs capped with 1,2-ethanedithiol (EDT) show a responsivity of 31.3/177.7 mA W^-1 and normalized detectivity of ∼1 × 10¹⁰/10⁹ cm Hz^1/2 W^-1 under UV/IR illumination at 375/2200 nm at RT. The potential of the ITO NCs sensors to monitor low concentrations of NO₂ is activated by light illumination. The sensor has a higher response (4.2) to 1 ppm of NO₂, shorter response/recovery time (156.8/554.2 s), and a lower detection limit (LOD) (219 ppb) under UV illumination compared within a dark environment. The LOD of the sensor is lower than the allowable exposure limit of NO₂ specified in "Air Pollutant Limits" of the Occupational Safety and Health Administration (OSHA). Our work paves an alternative platform for the development of low-cost, integration-friendly multifunctional devices.

Electrical Tuning of Plasmonic Conducting Polymer Nanoantennas

Nanostructures of conventional metals offer manipulation of light at the nanoscale but are largely limited to static behavior due to fixed material properties. To develop the next frontier of dynamic nano-optics and metasurfaces, this study utilizes the redox-tunable optical properties of conducting polymers, as recently shown to be capable of sustaining plasmons in their most conducting oxidized state. Electrically tunable conducting polymer nano-optical antennas are presented, using nanodisks of poly(3,4-ethylenedioxythiophene:sulfate) (PEDOT:Sulf) as a model system. In addition to repeated on/off switching of the polymeric nanoantennas, the concept enables gradual electrical tuning of the nano-optical response, which was found to be related to the modulation of both density and mobility of the mobile polaronic charge carriers in the polymer. The resonance position of the PEDOT:Sulf nanoantennas can be conveniently controlled by disk size, here reported down to a wavelength of around 1270 nm. The presented concept may be used for electrically tunable metasurfaces, with tunable farfield as well as nearfield. The work thereby opens for applications ranging from tunable flat meta-optics to adaptable smart windows.

Synergistically Modulating Geometry and Electronic Structures of a Chalcogenide Photocatalyst via an Ion-Exchange Strategy

Maneuvering the architecture and composition of semiconductors is essential to optimizing their performance in photocatalytic solar-to-fuel conversion. Here, we show that ion exchange, having a disparate mechanism with direct nucleation and growth of semiconductor crystals, can provide a new platform for rational control over the geometry and electronic structures of chalcogenide semiconductor photocatalysts. As a demonstration, the ZnSe nanocubes possessing a hollowed architecture and doped with a controllable amount of Ag⁺ ions are accessed via sequential ion exchange. The kinetics of the exchange reaction offers a knob for regulating the electronic structures of the Ag-doped ZnSe hollow cubes and, hence, their functions in light harvesting and photogenerated charge separation. Such synergistically geometric and optoelectronic modulation of ZnSe brings an order of magnitude enhancement in photocatalytic H₂ evolution activity relative to commercial ZnSe powders. Our study corroborates that ion exchange may open up new horizons for judicious fabrication and engineering of semiconductor-based photocatalyst materials.

Controlled Synthesis and Exploration of CuxFeS4 Bornite Nanocrystals

Plasmonic semiconductor nanocrystals (NCs) are a new and exciting class of materials that enable higher control of their localized surface plasmon resonance (LSPR) than metallic counterparts. Additionally, earth-abundant and non-toxic materials such as copper iron sulfides are gaining interest as alternatives to heavy metal-based semiconductor materials. Colloidal bornite (Cu₅FeS₄) is an interesting but underexplored example of a heavy metal-free plasmonic semiconductor. This report details the hot-injection synthesis of bornite yielding NCs ranging from 2.7 to 6.1 nm in diameter with stoichiometric control of the copper and iron content. The absorbance spectra of bornite NCs with different Cu:Fe ratios change at different rates as the particles oxidize and develop LSPR in the near-infrared region. X-ray photoelectron spectroscopy results indicate that oxidation produces sulfates rather than metal oxides as well as a decrease in the iron content within the NCs. Additionally, increasing iron content leads to decreases in carrier density and effective mass of the carrier, as determined by the Drude model. This controlled synthesis, combined with a further understanding of the relationship between the particle structure and optical properties, will enable the continued development and application of these fascinating heavy metal-free plasmonic semiconductor nanoparticles.

Manipulating atomic defects in plasmonic vanadium dioxide for superior solar and thermal management

Vanadium dioxide (VO₂) is a unique active plasmonic material due to its intrinsic metal-insulator transition, remaining less explored. Herein, we pioneer a method to tailor the VO₂ surface plasmon by manipulating its atomic defects and establish a universal quantitative understanding based on seven representative defective VO₂ systems. Record high tunability is achieved for the localized surface plasmon resonance (LSPR) energy (0.66-1.16 eV) and transition temperature range (40-100 °C). The Drude model and density functional theory reveal that the charge of cations plays a dominant role in the numbers of valence electrons to determine the free electron concentration. We further demonstrate their superior performances in extensive unconventional plasmonic applications including energy-saving smart windows, wearable camouflage devices, and encryption inks.

M. M. de Almeida J, Pastoriza-Santos I, C. C. Coelho L. Advances in Plasmonic Sensing at the NIR-A Review

Surface plasmon resonance (SPR) and localized surface plasmon resonance (LSPR) are among the most common and powerful label-free refractive index-based biosensing techniques available nowadays. Focusing on LSPR sensors, their performance is highly dependent on the size, shape, and nature of the nanomaterial employed. Indeed, the tailoring of those parameters allows the development of LSPR sensors with a tunable wavelength range between the ultra-violet (UV) and near infra-red (NIR). Furthermore, dealing with LSPR along optical fiber technology, with their low attenuation coefficients at NIR, allow for the possibility to create ultra-sensitive and long-range sensing networks to be deployed in a variety of both biological and chemical sensors. This work provides a detailed review of the key science underpinning such systems as well as recent progress in the development of several LSPR-based biosensors in the NIR wavelengths, including an overview of the LSPR phenomena along recent developments in the field of nanomaterials and nanostructure development towards NIR sensing. The review ends with a consideration of key advances in terms of nanostructure characteristics for LSPR sensing and prospects for future research and advances in this field.

Constructing Surface Plasmon Resonance on Bi2WO6 to Boost High-Selective CO2 Reduction for Methane

Plasmonic Bi₂WO₆ with strong localized surface plasmon resonance (LSPR) around the 500-1400 region is successfully constructed by electron doping. Oxygen vacancies on W-O-W (V1) and Bi-O-Bi (V2) sites are precisely controlled to obtain Bi₂WO₆-V₁ with LSPR and Bi₂WO₆-V₂ with defect absorption. Density functional theory (DFT) calculation demonstrates that the V1-induced energy state facilitates photoelectron collection for a long lifetime, resulting in LSPR of Bi₂WO₆. Photoelectron trapping on V1 sites is demonstrated by a single-particle photoluminescence (PL) study, and 93% PL quenching efficiency is observed. With strong LSPR, plasmonic Bi₂WO₆-V₁ exhibits highly selective methane generation with a rate of 9.95 μmol g^-1 h^-1 during the CO₂ reduction reaction (CO₂-RR), which is 26-fold higher than 0.37 μmol g^-1 h^-1 of BiWO₃-V₂ under UV-visible light irradiation. LSPR-dependent methane generation is confirmed by various photocatalytic results of plasmonic Bi₂WO₆ with tunable LSPR and different light excitations. Furthermore, the DFT-simulated pathway of CO₂-RR and in situ Fourier transform infrared spectra on the surface of Bi₂WO₆ prove that V1 sites facilitate CH₄ generation. Our work provides a strategy to obtain nonmetallic plasmonic materials by electron doping.

Hydrogen-Doping-Induced Metal-Like Ultrahigh Free-Carrier Concentration in Metal-Oxide Material for Giant and Tunable Plasmon Resonance

The practical utilization of plasmon-based technology relies on the ability to find high-performance plasmonic materials other than noble metals. A key scientific challenge is to significantly increase the intrinsically low concentration of free carriers in metal-oxide materials. Here, a novel electron-proton co-doping strategy is developed to achieve uniform hydrogen doping in metal-oxide MoO₃ at mild conditions, which creates a metal-like ultrahigh free-carrier concentration approaching that of noble metals (10²¹ cm^-3 in H_1.68 MoO₃ versus 10²² cm^-3 in Au/Ag). This bestows giant and tunable plasmonic resonances in the visible region to this originally semiconductive material. Using ultrafast spectroscopy characterizations and first-principle simulations, the formation of a quasi-metallic energy band structure that leads to long-lived and strong plasmonic field is revealed. As verified by the surface-enhanced Raman spectra (SERS) of rhodamine 6G molecules on H_x MoO₃ , the SERS enhancement factor reaches as high as 1.1 × 10⁷ with a detection limit at concentration as low as 1 × 10^-9  mol L^-1 , representing the best among the hitherto reported non-metal systems. The findings not only provide a set of metal-like semiconductor materials with merits of low cost, tunable electronic structure, and plasmonic resonance, but also a general strategy to induce tunable ultrahigh free-carrier concentration in non-metal systems.

Electron Beam Infrared Nano-Ellipsometry of Individual Indium Tin Oxide Nanocrystals

Leveraging recent advances in electron energy monochromation and aberration correction, we record the spatially resolved infrared plasmon spectrum of individual tin-doped indium oxide nanocrystals using electron energy-loss spectroscopy (EELS). Both surface and bulk plasmon responses are measured as a function of tin doping concentration from 1-10 atomic percent. These results are compared to theoretical models, which elucidate the spectral detuning of the same surface plasmon resonance feature when measured from aloof and penetrating probe geometries. We additionally demonstrate a unique approach to retrieving the fundamental dielectric parameters of individual semiconductor nanocrystals via EELS. This method, devoid from ensemble averaging, illustrates the potential for electron-beam ellipsometry measurements on materials that cannot be prepared in bulk form or as thin films.

Bond dissociation energies of transition metal oxides: CrO, MoO, RuO, and RhO

Through the use of resonant two-photon ionization spectroscopy, sharp predissociation thresholds have been identified in the spectra of CrO, MoO, RuO, and RhO. Similar thresholds have previously been used to measure the bond dissociation energies (BDEs) of many molecules that have a high density of vibronic states at the ground separated atom limit. A high density of states allows precise measurement of the BDE by facilitating prompt dissociation to ground state atoms when the BDE is exceeded. However, the number of states required for prompt predissociation at the thermochemical threshold is not well defined and undoubtedly varies from molecule to molecule. The ground separated atom limit generates 315 states for RuO, 252 states for RhO, and 63 states for CrO and MoO. Although comparatively few states derive from this limit for CrO and MoO, the observation of sharp predissociation thresholds for all four molecules nevertheless allows BDEs to be assigned as 4.863(3) eV (RuO), 4.121(3) eV (RhO), 4.649(5) eV (CrO), and 5.414(19) eV (MoO). Thermochemical cycles are used to derive the enthalpies of formation of the gaseous metal oxides and to obtain IE(RuO) = 8.41(5) eV, IE(RhO) = 8.56(6) eV, D₀(Ru-O^-) = 4.24(2) eV, D₀(Cr-O^-) = 4.409(8) eV, and D₀(Mo-O^-) = 5.243(20) eV. The mechanisms leading to prompt predissociation at threshold in the cases of CrO and MoO are discussed. Also presented is a discussion of the bonding trends for the transition metal oxides, which are compared to the previously measured transition metal sulfides.

Biologically interfaced nanoplasmonic sensors

Understanding biointerfacial processes is crucial in various fields across fundamental and applied biology, but performing quantitative studies via conventional characterization techniques remains challenging due to instrumentation as well as analytical complexities and limitations. In order to accelerate translational research and address current challenges in healthcare and medicine, there is an outstanding need to develop surface-sensitive technologies with advanced measurement capabilities. Along this line, nanoplasmonic sensing has emerged as a powerful tool to quantitatively study biointerfacial processes owing to its high spatial resolution at the nanoscale. Consequently, the development of robust biological interfacing strategies becomes imperative to maximize its characterization potential. This review will highlight and discuss the critical role of biological interfacing within the context of constructing nanoplasmonic sensing platforms for biointerfacial science applications. Apart from paving the way for the development of highly surface-sensitive characterization tools that will spur fundamental biological interaction studies and improve the overall understanding of biological processes, the basic principles behind biointerfacing strategies presented in this review are also applicable to other fields that involve an interface between an inorganic material and a biological system.

Self-Limiting Shell Formation in Cu@Ag Core-Shell Nanocrystals during Galvanic Replacement

The understanding of synthetic pathways of bimetallic nanocrystals remains limited due to the complex energy landscapes and dynamics involved. In this work, we investigate the formation of self-limiting Cu@Ag core-shell nanoparticles starting from Cu nanocrystals followed by galvanic replacement with Ag ions. Bulk quantification with atomic emission spectroscopy and spatially resolved elemental mapping with electron microscopy reveal distinct nucleation regimes that produce nanoparticles with a tunable Ag shell thickness, but only up to a certain limiting thickness. We develop a quantitative transport model that explains this observed self-limiting structure as arising from the balance between entropy-driven interdiffusion and a positive mixing enthalpy. The proposed model depends only on the intrinsic physical properties of the system such as diffusivity and mixing energy and directly yields a high level of agreement with the elemental mapping profiles without requiring additional fit parameters.

Broadband Tunable Mid-infrared Plasmon Resonances in Cadmium Oxide Nanocrystals Induced by Size-Dependent Nonstoichiometry

A central theme of nanocrystal (NC) research involves synthesis of dimension-controlled NCs and studyof size-dependent scaling laws governing their optical, electrical, magnetic, and thermodynamic properties. Here, we describe the synthesis of monodisperse CdO NCs that exhibit high quality-factor (up to 5.5) mid-infrared (MIR) localized surface plasmon resonances (LSPR) and elucidate the inverse scaling relationship between carrier concentration and NC size. The LSPR wavelength is readily tunable between 2.4 and ∼6.0 μm by controlling the size of CdO NCs. Structural and spectroscopic characterization provide strong evidence that free electrons primarily originate from self-doping due to NC surface-induced nonstoichiometry. The ability to probe and to control NC stoichiometry and intrinsic defects will pave the way toward predictive synthesis of doped NCs with desirable LSPR characteristics.