Black phosphorene as a hole extraction layer boosting solar water splitting of oxygen evolution catalysts

The CuSCN layer between BiVO4 and NiFeOx for facilitating photogenerated carrier transfer and water oxidation kinetics

Modification of oxygen evolution co-catalyst (OEC) on the surface of bismuth vanadate (BiVO4) can effectively improve the kinetics of water oxidation, but it is still limited by the small hole extraction driving force at the BiVO4/OEC interface. Modulating the BiVO4/OEC interface with a hole transfer layer (HTL) is expected to facilitate hole transport from BiVO4 to the OEC surface. Herein, a copper(I) thiocyanate (CuSCN) HTL is inserted between BiVO4 and NiFeOx OEC to create BiVO4/CuSCN/NiFeOx photoanode, resulting in a significant enhancement of photoelectrochemical (PEC) water splitting performance. From electrochemical analyses and density functional theory (DFT) simulations, the markedly enhanced PEC performance is attributed to the insertion of CuSCN as an HTL, which promotes the extraction of holes from BiVO4 surface and boosts the water oxidation kinetics. The optimal photoanode achieves a photocurrent density of 5.6 mA cm-2 at 1.23 V versus the reversible hydrogen electrode (vs. RHE) and an impressive charge separation efficiency of 96.2 %. This work offers valuable insights into the development of advanced photoanodes for solar energy conversion and emphasizes the importance of selecting an appropriate HTL to mitigate recombination at the BiVO4/OEC interface.

Solar-driven highly selective conversion of glycerol to dihydroxyacetone using surface atom engineered BiVO4 photoanodes

Dihydroxyacetone is the most desired product in glycerol oxidation reaction because of its highest added value and large market demand among all possible oxidation products. However, selectively oxidative secondary hydroxyl groups of glycerol for highly efficient dihydroxyacetone production still poses a challenge. In this study, we engineer the surface of BiVO4 by introducing bismuth-rich domains and oxygen vacancies (Bi-rich BiVO4-x) to systematically modulate the surface adsorption of secondary hydroxyl groups and enhance photo-induced charge separation for photoelectrochemical glycerol oxidation into dihydroxyacetone conversion. As a result, the Bi-rich BiVO4-x increases the glycerol oxidation photocurrent density of BiVO4 from 1.42 to 4.26 mA cm-2 at 1.23 V vs. reversible hydrogen electrode under AM 1.5 G illumination, as well as the dihydroxyacetone selectivity from 54.0% to 80.3%, finally achieving a dihydroxyacetone production rate of 361.9 mmol m-2 h-1 that outperforms all reported values. The surface atom customization opens a way to regulate the solar-driven organic transformation pathway toward a carbon chain-balanced product.

Unveiling the effect of the structural transformation of CoZn-MOF on BiVO4 photoanode for efficient photoelectrochemical water oxidation

Photoelectrochemical (PEC) water splitting has been widely investigated for solar-to-hydrogen conversion. However, issues like high charge recombination rate and slow surface water oxidation kinetics severely hinder its (PEC) conversion efficiency. Herein, we constructed MOF-derived CoOOH cocatalyst on BiVO4 photoanode, using a feasible electrochemical activation strategy. The BiVO4-based photoanode obtained shows a high photocurrent density of 3.15 mA/cm2 at 1.23 VRHE and low onset potential. Detailed experiments and theoretical calculations show that during the activation of CoZn-MOFs, there was a partial breakage of 2-methylimidazole (mIM) linker, an increase in the oxidation state of Cobalt ion (Co), and increased O2-. The high PEC performance is mainly attributed to the MOF-derived CoOOH, which provides rich active sites for hole extraction and reduces the overpotential for oxygen evolution reaction. Furthermore, when CoZnNiFe-LDHs were decorated on BiVO4 using the ions exchange method, the photocurrent density of BiVO4/CoZnNiFe-LDHs photoanode got to 4.0 mA/cm2 at 1.23 VRHE, accompanied with high stability. This study provides insights into understanding the key role played by the structural transformation of MOF cocatalyst in PEC water splitting processes.

Graphene Quantum Dots as Hole Extraction and Transfer Layer Empowering Solar Water Splitting of Catalyst-Coupled Zinc Ferrite Nanorods

Despite the narrow band gap energy, the performance of zinc ferrite (ZnFe2O4) as a photoharvester for solar-driven water splitting is significantly hindered due to its sluggish charge transfer and severe charge recombination. This work reports the fabrication of a hybrid nanostructured hydrogenated ZnFe2O4 (ZFO) photoanode with enhanced photoelectrochemical water-oxidation activity through coupling N-doped graphene quantum dots (GQDs) as a hole transfer layer and Co-Pi as a catalyst. The GQDs not only reduce the surface-mediated nonradiative electron-hole pair recombination but also induce a built-in interfacial electric field leading to a favorable band alignment at the ZFO/GQDs interface, helping rapid photogenerated hole separation and serving as a conducting hole transfer highway, improve the hole transportation into the Co-Pi catalyst for enhanced water oxidation reaction kinetics. The optimized ZFO/GQD/Co-Pi hybrid photoanode delivers a 23-fold photocurrent enhancement at 1.23 V versus the reversible hydrogen electrode (RHE) and a significant 360 mV reduction in the onset potential, reaching 0.65 VRHE compared with the ZFO photoanode under 1 sun illumination in a neutral electrolytic environment. This investigation underscores the mechanism of synergistic interplay between the hole transport layer and cocatalyst in boosting the solar-illuminated water-splitting activity of the ZFO photoanode.

Electron deficient Bi3+δ serves as N2 absorption sites and inhibits carriers recombination to enhance N2 photo-fixation in BiOBr/TiO2 S-scheme heterojunction

Efficient carriers separation and multiple nitrogen (N2) activation sites are essential for N2 photo-fixation. Here, we found that the BiOBr/TiO2 (BBTO) displayed an attractive reversible photochromism (white → grey) due to the generation of electron deficient Bi3+δ, which was produced by the hole trapping of Bi3+ under light irradiation. Interestingly, more Bi3+δ were detected in the BBTO heterojunction than in pure BiOBr, attributing that the hole trapping was promoted by the built-in electric field in the Step scheme (S-scheme) heterojunction. In the BBTO, the electron deficient Bi3+δ enhanced carriers separation and served as the reactive active site to adsorb more N2. Consequently, the BBTO possessed an excellent N2 photo-fixation activity (191 μmol gcat-1 h-1), which was 7.7 and 18 times higher than that of pure BiOBr (24.8 μmol gcat-1 h-1) and TiO2 (10.6 μmol gcat-1 h-1), respectively. Therefore, this work provides a new perspective for enhancing N2 photo-fixation by the electron deficient photocatalysts with S-scheme heterojunction.

Modulating built-in electric field via Bi-VO4-Fe interfacial bridges to enhance charge separation for efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting on semiconductor electrodes is considered to be one of the important ways to produce clean and sustainable hydrogen fuel, which is a great help in solving energy and environmental problems. Bismuth vanadate (BiVO4) as a promising photoanode for photoelectrochemical water splitting still suffers from poor charge separation efficiency and photo-induced self-corrosion. Herein, we develop heterojunction-rich photoanodes composed of BiVO4 and iron vanadate (FeVO4), coated with nickel iron oxide (NiFeOx/FeVO4/BiVO4). The formation of the interface between BiVO4 and FeVO4 (Bi-VO4-Fe bridges) enhances the interfacial interaction, resulting in improved performance. Meanwhile, high-conductivity FeVO4 and NiFeOx oxygen evolution co-catalysts effectively enhance bulk electron/hole separation, interface water's kinetics and photostability. Concurrently, the optimized NiFeOx/FeVO4/BiVO4 possesses a remarkable photocurrent density of 5.59 mA/cm2 at 1.23 V versus reversible hydrogen electrode (vs RHE) under AM 1.5G (Air Mass 1.5 Global) simulated sunlight, accompanied by superior stability without any decreased of its photocurrent density after 14 h. This work not only reveals the crucial role of built-in electric field in BiVO4-based photoanode during PEC water splitting, but also provides a new guide to the design of efficient photoanode for PEC.

Nanoconfinement Enables Photoelectrochemical Selective Oxidation of Glycerol via the Microscale Fluid Effect

The glycerol oxidation reaction (GOR) run with photoelectrochemical cells (PECs) is one of the most promising ways to upgrade biomass because it is thermodynamically favorable, while irreversible overoxidation leads to unsatisfactory product selectivities. Herein, a tunable one-dimensional nanoconfined environment was introduced into the GOR process, which accelerated mass transfer of glycerol via the microscale fluid effect and changed the main oxidation product from formic acid (FA) to glyceraldehyde (GLD), which led to retention of the heavier multicarbon products. The rate of glycerol diffusion in the nanochannels increased by a factor of 4.92 with decreasing inner diameters. The main product from the PEC-selective oxidation of glycerol changed from the C1 product FA to the C3 product GLD with a great selectivity of 60.7%. This work provides a favorable approach for inhibiting further oxidation of multicarbon products and illustrates the importance of microenvironmental regulation in biomass oxidation.

Supramolecular catalyst with [FeCl4] unit boosting photoelectrochemical seawater splitting via water nucleophilic attack pathway

Propelled by the structure of water oxidation co-catalysts in natural photosynthesis, molecular co-catalysts have long been believed to possess the developable potential in artificial photosynthesis. However, the interfacial complexity between light absorber and molecular co-catalyst limits its structural stability and charge transfer efficiency. To overcome the challenge, a supramolecular scaffold with the [FeCl4] catalytic units is reported, which undergo a water-nucleophilic attack of the water oxidation reaction, while the supramolecular matrix can be in-situ grown on the surface of photoelectrode through a simple chemical polymerization to be a strongly coupled interface. A well-defined BiVO4 photoanode hybridized with [FeCl4] units in polythiophene reaches 4.72 mA cm-2 at 1.23 VRHE, which also exhibits great stability for photoelectrochemical seawater splitting due to the restraint on chlorine evolution reaction by [FeCl4] units and polythiophene. This work provides a novel solution to the challenge of the interface charge transfer of molecular co-catalyst hybridized photoelectrode.

HClO-Mediated Photoelectrochemical Epoxidation of Alkenes with Near 100 % Conversion Rate and Selectivity by Regulating Lattice Chlorine Cycle

Directional organic transformation via a green, sustainable catalytic reaction has attracted a lot of attention. Herein, we report a photoelectrochemical approach for highly selective epoxidation of alkenes in a salt solution using Co2 (OH)3 Cl (CoOCl) as a bridge of photo-generated charge, where the lattice Cl- of CoOCl can be oxidized to generate HClO by the photo-generated holes of BiVO4 photoanode and be spontaneously recovered by Cl- of a salt solution, which then oxidizes the alkenes into the corresponding epoxides. As a result, a series of water-soluble alkenes, including 4-vinylbenzenesulfonic acid sodium, 2-methyl-2-propene-1-sulfonic acid sodium, and 3-methyl-3-buten-1-ol can be epoxidized with near 100 % conversion rate and selectivity. Through further inserting a MoOx protection layer between BiVO4 and CoOCl, the stability of CoOCl-MoOx /BiVO4 can be maintained for at least 120 hours. This work opens an avenue for solar-driven organic epoxidation with a possibility of on-site reaction around the abundant ocean.

Enhanced Charge Separation in Nanoporous BiVO4 by External Electron Transport Layer Boosts Solar Water Splitting

The optimization of charge transport with electron-hole separation directed toward specific redox reactions is a crucial mission for artificial photosynthesis. Bismuth vanadate (BiVO4 , BVO) is a popular photoanode material for solar water splitting, but it faces tricky challenges in poor charge separation due to its modest charge transport properties. Here, a concept of the external electron transport layer (ETL) is first proposed and demonstrated its effectiveness in suppressing the charge recombination both in bulk and at surface. Specifically, a conformal carbon capsulation applied on BVO enables a remarkable increase in the charge separation efficiency, thanks to its critical roles in passivating surface charge-trapping sites and building external conductance channels. Through decorated with an oxygen evolution catalyst to accelerate surface charge transfer, the carbon-encased BVO (BVO@C) photoanode manifests durable water splitting over 120 h with a high current density of 5.9 mA cm-2 at 1.23 V versus the reversible hydrogen electrode (RHE) under 1 sun irradiation (100 mW cm-2 , AM 1.5 G), which is an activity-stability trade-off record for single BVO light absorber. This work opens up a new avenue to steer charge separation via external ETL for solar fuel conversion.

Engineering band structuring via dual atom modification for an efficient photoanode

Efficient carrier separation is important for improving photoelectrochemical water splitting. Here, the morphology modification and band structure engineering of Ta3N5 are accomplished by doping it with Cu and Zr using a two-step method for the first time. The initially interstitially-doped Cu atoms act as anchors to interact with subsequently doped Zr atoms under the influence of differences in electronegativity. This interaction results in Cu,Zrg-Ta3N5 having a dense morphology and higher crystallinity, which helps to reduce carrier recombination at grain boundaries. Furthermore, the gradient doping of Zr generates a band edge energy gradient, which significantly enhances bulk charge separation efficiency. Therefore, a photoanode based on Cu,Zrg-Ta3N5 delivers an onset potential of 0.38 VRHE and a photocurrent density of 8.9 mA cm-2 at 1.23 VRHE. Among all the Ta3N5-based photoanodes deposited on FTO, a Cu,Zrg-Ta3N5-based photoanode has the lowest onset potential and highest photocurrent. The novel material morphology regulation and band edge position engineering strategies described herein provide new ideas for the preparation of other semiconductor nanoparticles to improve the photoelectrochemical water splitting performance.

A Facile Design for Water-Oxidation Molecular Catalysts Precise Assembling on Photoanodes

Regulating the interfacial charge transfer behavior between cocatalysts and semiconductors remains a critical challenge for attaining efficient photoelectrochemical water oxidation reactions. Herein, using bismuth vanadate (BiVO4 ) photoanode as a model, it introduces an Au binding bridge as holes transfer channels onto the surfaces of BiVO4 , and the cyano-functionalized cobalt cubane (Co4 O4 ) molecules are preferentially immobilized on the Au bridge due to the strong adsorption of cyano groups with Au nanoparticles. This orchestrated arrangement facilitates the seamless transfer of photogenerated holes from BiVO4 to Co4 O4 molecules, forming an orderly charge transfer pathway connecting the light-absorbing layer to reactive sites. An exciting photocurrent density of 5.06 mA cm-2 at 1.23 V versus the reversible hydrogen electrode (3.4 times that of BiVO4 ) is obtained by the Co4 O4 @Au(A)/BiVO4 photoanode, where the surface charge recombination is almost completely suppressed accompanied by a surface charge transfer efficiency over 95%. This work represents a promising strategy for accelerating interfacial charge transfer and achieving efficient photoelectrochemical water oxidation reaction.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.

Recent Advances in Phosphorene: Structure, Synthesis, and Properties

Phosphorene is a 2D phosphorus atomic layer arranged in a honeycomb lattice like graphene but with a buckled structure. Since its exfoliation from black phosphorus in 2014, phosphorene has attracted tremendous research interest both in terms of synthesis and fundamental research, as well as in potential applications. Recently, significant attention in phosphorene is motivated not only by research on its fundamental physical properties as a novel 2D semiconductor material, such as tunable bandgap, strong in-plane anisotropy, and high carrier mobility, but also by the study of its wide range of potential applications, such as electronic, optoelectronic, and spintronic devices, energy conversion and storage devices. However, a lot of avenues remain to be explored including the fundamental properties of phosphorene and its device applications. This review recalls the current state of the art of phosphorene and its derivatives, touching upon topics on structure, synthesis, characterization, properties, stability, and applications. The current needs and future opportunities for phosphorene are also discussed.

Prompt Hole Extraction Suppresses V5+ Dissolution and Sustains Large-Area BiVO4 Photoanodes for Over 2100 h Water Oxidation

Nanostructured bismuth vanadate (BiVO4) is at the forefront of emerging photoanodes in photoelectrochemical tandem devices for solar water splitting owing to the suitable band edge position and efficient charge separation capability. However, the (photo)chemical corrosion involving V5+ dissolution limits the long-term stability of BiVO4. Herein, guided by DFT calculations, we introduce an ALD-derived NiOx catalyst layer on BiVO4 to stabilize the surface Bi-O bonds, facilitate hole extraction, and thus suppress the V5+ dissolution. At the same time, the ALD NiOx catalyst layer could efficiently suppress the surface recombination and accelerate the surface OER kinetics, boosting the half-cell applied bias photon-to-current efficiency of BiVO4 to 2.05%, as well as a fill factor of 47.1%. By adding trace NaVO3 to the electrolyte, the NiOx/BiVO4 photoanode with an illumination area of 10.5 cm2 shows a record operational stability of more than 2100 h.

An Emerging Family of Piezocatalysts: 2D Piezoelectric Materials

Piezocatalysis is an emerging technique that holds great promise for the conversion of ubiquitous mechanical energy into electrochemical energy through piezoelectric effect. However, mechanical energies in natural environment (such as wind energy, water flow energy, and noise) are typically tiny, scattered, and featured with low frequency and low power. Therefore, a high response to these tiny mechanical energies is critical to achieving high piezocatalytic performance. In comparison to nanoparticles or 1D piezoelectric materials, 2D piezoelectric materials possess characteristics such as high flexibility, easy deformation, large surface area, and rich active sites, showing more promise in future for practical applications. In this review, state-of-the-art research progresses on 2D piezoelectric materials and their applications in piezocatalysis are provided. First, a detailed description of 2D piezoelectric materials are offered. Then a comprehensive summary of the piezocatalysis technique is presented and examines the piezocatalysis applications of 2D piezoelectric materials in various fields, including environmental remediation, small-molecule catalysis, and biomedicine. Finally, the main challenges and prospects of 2D piezoelectric materials and their applications in piezocatalysis are discussed. It is expected that this review can fuel the practical application of 2D piezoelectric materials in piezocatalysis.

Schiff Base Complex Cocatalyst with Coordinatively Unsaturated Cobalt Sites for Photoelectrochemical Water Oxidation

Integrating inorganic oxygen evolution cocatalysts (OECs) with photoanodes is regarded as an available strategy to increase the photogenerated charge utilization for accelerated water oxidation kinetics. Nevertheless, most widely used transition metal (oxyhydr)oxides OECs suffer from inevitable charge recombination at photoanode/OECs interfaces and underabundant catalytic active sites. Herein, a cobalt-organic complex with microflower-like features (denoted as MF) was constructed by coordination of Schiff base ligands and Co2+ metal ions and then decorated on porous BiVO4 employed as photoanodes for photoelectrochemical (PEC) water oxidation. The as-synthesized BiVO4/MF photoanode achieves a photocurrent density of 4.38 mA cm-2 and at 1.23 VRHE in 0.5 M Na2SO4 electrolyte under simulated 1 sun illumination, over approximately 5.48 times larger than that of BiVO4 counterpart, and exhibits a 120 mV cathodic shift of onset potential with outstanding photostability. Systematic characterizations reveal that the improved PEC efficiency is mainly attributed to the well-designed coordinatively unsaturated Co2+ sites, which not only serve as powerful photohole extraction engines along reversed interfacial Co-O-Bi bonds to promote charge transfer across the BiVO4/complex interface but also act as reaction active centers by accelerating surface water oxidation kinetics. This work provides new insights for designing highly effective OECs for PEC water oxidation.

Synergy Effect of the Enhanced Local Electric Field and Built-In Electric Field of CoS/Mo-Doped BiVO4 for Photoelectrochemical Water Oxidation

Bismuth vanadate is a promising material for photoelectrochemical water oxidation. However, it suffers from a low quantum efficiency, poor stability, and slow water oxidation kinetics. Here, we developed a novel photoanode of CoS/Mo-BiVO4 with excellent photoelectrochemical water oxidation performance. It achieved a photocurrent density of 4.5 mA cm-2 at 1.23 V versus the reversible hydrogen electrode, ∼4 times that of BiVO4. The CoS/Mo-BiVO4 photoanode also exhibited good stability, and the photocurrent density generated by the CoS/Mo-BiVO4 photoanode did not significantly decrease after light irradiation for 2 h. Upon replacement of part of the V with Mo doping in BiVO4, the local electric field around the Mo-O bond was enhanced, thus promoting carrier separation in BiVO4. The CoS was deposited on the surface of Mo-BiVO4, forming a built-in electric field at the interface. Under the action of the bias electric field and the built-in electric field, the carriers of CoS/Mo-BiVO4 were efficiently separated in the direction of the inverse type II heterojunction. In addition, CoS improved the light absorption and charge injection efficiency of the CoS/Mo-BiVO4 photoanode.

All Printed Photoanode/Photovoltaic Mini-Module for Water Splitting

Printing a large-area bismuth vanadate photoanode offers a promising approach for cost-effective photoelectrochemical (PEC) water splitting. However, the light absorption trade-off with charge transfer, as well as stability issues always lead to poor PEC efficiency. Here, the solution-processed recipe is advanced with BiI3 dopant for the printed deposition with controllable crystal growth. The resultant BiVO4 films prefer (001) orientation with nanorod feature on substrate, allowing a faster charge transfer and improved photocurrent. The BiVO4 photoanode in tandem with perovskite solar module delivers an operating photocurrent density of 5.88 mA cm-2 at zero bias in 3.11 cm2 active area under AM 1.5 G illumination, yielding a solar-to-hydrogen efficiency as high as 7.02% for unbiased water splitting. Equally important, the stability of the aged BiVO4 rods has been addressed to distinguish phase segregation at surface. The photocatalysis degradation composes of vanadium loss and Bi2 O3 enriching at the surface, opening a lid on the long-term stability of BiVO4 photoanodes.

Enlarging the Ni-O Bond Polarizability in a Phosphorene-Hosted Metal-Organic Framework for Boosted Water Oxidation Electrocatalysis

The emerging lattice-oxygen oxidation mechanism (LOM) presents attractive opportunities for breaking the scaling relationship to boost oxygen evolution reaction (OER) with the direct OLattice-*O interaction. However, currently the LOM-triggering rationales are still debated, and a streamlined physicochemical paradigm is extremely desirable for the design of LOM-defined OER catalysts. Herein, a Ni metal-organic framework/black phosphorene (NiMOF/BP) heterostructure is theoretically profiled and constructed as a catalytic platform for the LOM-derived OER studies. It is found that the p-type BP host can enlarge the Ni-O bond polarizability of NiMOF through the Ni-O bond stretching and Ni valence declining synergically. Such an enlarged bond polarizability will in principle alleviate the lattice oxygen confinement to benefit the LOM pathway and OER performance. As a result, the optimized NiMOF/BP catalyst exhibits promising OER performance with a low overpotential of 260 mV at 10 mA cm-2 and long-term stability in 1 M KOH electrolyte. Both experiment and calculation results suggest the activated LOM pathway with a more balanced step barrier in the NiMOF/BP OER catalyst. This research puts forward Ni-O bond polarizability as the criterion to design LOM-scaled electrocatalysts for water oxidation.

Decoupled Artificial Photosynthesis via a Catalysis-Redox Coupled COF||BiVO4 Photoelectrochemical Device

Artificial photosynthesis is an attractive approach to direct fuel production from sunlight. However, the simultaneous O2 evolution reaction (OER) and CO2 reduction reaction (CDRR) present challenges for product separation and safety. Herein, we propose a strategy to temporally decouple artificial photosynthesis through photoelectrochemical energy storage. We utilized a covalent organic framework (DTCo-COF) with redox-active electron donors (-C-OH moieties) and catalytically active electron acceptors (cobalt-porphyrin) to enable reversible -C-OH/-C═O redox reaction and redox-promoted CO2-to-CO photoreduction. Integrating the COF photocathode with an OER photoanode in a photoelectrochemical device allows the effective storage of OER-generated electrons and protons by -C═O groups. These stored charges can be later employed for CDRR while regenerating -C═O to complete the loop, thus enabling on-demand and separate production of O2 or solar fuels. Our work sets the stage for advancements in decoupled artificial photosynthesis and the development of more efficient solar fuel production technologies.

Surface Reconstruction and Passivation of BiVO4 Photoanodes Depending on the "Structure Breaker" Cs. JACS AU 2023;3:1851-1863. [PMID: 37502161 PMCID: PMC10369408 DOI: 10.1021/jacsau.3c00100] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Monoclinic BiVO₄ is one of the most promising photoanode materials for solar water splitting. The photoelectrochemical performance of a BiVO₄ photoanode could be significantly influenced by the noncovalent interactions of redox-inert metal cations at the photoanode-electrolyte interfaces, but this point has not been well investigated. In this work, we studied the Cs⁺-dependent surface reconstruction and passivation of BiVO₄ photoanodes. Owing to the "structure breaker" nature of Cs⁺, the Cs⁺ at the BiVO₄ photoanode-electrolyte interfaces participated in BiVO₄ surface photocorrosion to form a Cs⁺-doped bismuth vanadium oxide amorphous thin layer, which inhibited the continuous photocorrosion of BiVO₄ and promoted surface charge transfer and water oxidation. The resulting cocatalyst-free BiVO₄ photoanodes achieved 3.3 mA cm^-2 photocurrent for water oxidation. With the modification of FeOOH catalysts, the photocurrent at 1.23 V_RHE reached 5.1 mA cm^-2, and a steady photocurrent of 3.0 mA cm^-2 at 0.8 V_RHE was maintained for 30 h. This work provides new insights into the understanding of Cs⁺ chemistry and the effects of redox-inert cations at the electrode-electrolyte interfaces.

Photo-Electrochemical Glycerol Conversion over a Mie Scattering Effect Enhanced Porous BiVO4 Photoanode

The photo-electrochemical (PEC) oxidation of glycerol (GLY) to high-value-added dihydroxyacetone (DHA) can be achieved over a BiVO₄ photoanode, while the PEC performance of most BiVO₄ photoanodes is impeded due to the upper limits of the photocurrent density. Here, an enhanced Mie scattering effect of the well-documented porous BiVO₄ photoanode is obtained with less effort by a simple annealing process, which significantly reduces the reflectivity to near zero. The great light absorbability increases the basic photocurrent density by 1.77 times. The selective oxidation of GLY over the BiVO₄ photoanode results in a photocurrent density of 6.04 mA cm^-2 and a DHA production rate of 325.2 mmol m^-2 h^-1 that exceeds all reported values. This work addresses the poor ability of nanostructured BiVO₄ to harvest light, paving the way for further improvements in charge transport and transfer to realize highly efficient PEC conversion.

A Conformal Carbon Nanolayer Coated Fe2 O3 Cocatalyst for the Promoted Activity of Plasma-Sputtered BiVO4 Photoanode

To simultaneously improve the hole extraction ability of the BiVO₄ photoanode and accelerate the surface reaction kinetics, herein, a carbon nanolayer conformally coated Fe₂ O₃ (C-Fe₂ O₃ ) as oxygen evolution catalyst (OEC) is loaded on the H₂ plasma treated nanoporous BiVO₄ (BVO(H₂ )) surface by a hydrothermal reaction. It is found that the H₂ plasma induced vacancies in BVO remarkably increases the conductivity, and the C-Fe₂ O₃ enables hole extraction from the bulk to the surface as well as efficient hole injection to the electrolyte. As a result, the C-Fe₂ O₃ /BVO(H₂ ) photoanode achieves a photocurrent density of 4.4 mA/cm² at 1.23 V vs. reversible hydrogen electrode (RHE) and an ABPE value of 1.5 % at 0.68 V vs. RHE, which are 4.8-fold and 13-fold higher than that of BVO photoanode, respectively.

A BiVO4 Photoanode with a VOx Layer Bearing Oxygen Vacancies Offers Improved Charge Transfer and Oxygen Evolution Kinetics in Photoelectrochemical Water Splitting

Sluggish oxygen evolution kinetics are one of the key limitations of bismuth vanadate (BiVO₄ ) photoanodes for efficient photoelectrochemical (PEC) water splitting. To address this issue, we report a vanadium oxide (VO_x ) with enriched oxygen vacancies conformally grown on BiVO₄ photoanodes by a simple photo-assisted electrodeposition process. The optimized BiVO₄ /VO_x photoanode exhibits a photocurrent density of 6.29 mA cm^-2 at 1.23 V versus the reversible hydrogen electrode under AM 1.5 G illumination, which is ca. 385 % as high as that of its pristine counterpart. A high charge-transfer efficiency of 96 % is achieved and stable PEC water splitting is realized, with a photocurrent retention rate of 88.3 % upon 40 h of testing. The excellent PEC performance is attributed to the presence of oxygen vacancies in VO_x that forms undercoordinated sites, which strengthen the adsorption of water molecules onto the active sites and promote charge transfer during the oxygen evolution reaction. This work demonstrates the potential of vanadium-based catalysts for PEC water oxidation.

Porphyrins-Assisted Cocatalyst Engineering with CoOV Bond in BiVO4 Photoanode for Efficient Oxygen Evolution Reaction

The application of photoelectrochemical (PEC) water splitting is limited by the sluggish surface oxygen evolution reaction (OER) kinetics. OER kinetics can be effectively improved through cocatalyst engineering. However, the tardy transfer process and serious recombination of carriers are the key factors restricting the cocatalyst development. Taking BiVO₄ as an example, a Co-modified heme film rich in large conjugated ring structures is introduced onto the photoanode surface using a solvothermal method. This film functions as an efficient cocatalyst. It considerably reduces the surface overpotential, promotes the transfer of photogenerated holes, and boosts the kinetics of OER by specifically affecting the formation of OOH*. Simultaneously, the formed CoOV bonds induce strong interaction at the photoanode/cocatalyst interfaces, reducing the recombination of photogenerated carriers. Consequently, the onset potential of the optimized photoanode decreases from 0.45 to 0.07 V and the photocurrent density at 1.23 V versus reversible hydrogen electrode boosts to 5.3 mA cm^-2 . This work demonstrates a facile strategy for designing cocatalysts to obtain rapid hole transfer capability and reduced carrier recombination for improved PEC performance.

Boosting Charge Transfer Efficiency by Nanofragment MXene for Efficient Photoelectrochemical Water Splitting of NiFe(OH)x Co-Catalyzed Hematite

The use of oxygen evolution co-catalysts (OECs) with hematite photoanodes has received much attention because of the potential to reduce surface charge recombination. However, the low surface charge transfer and bulk charge separation rate of hematite are not improved by decorating with OECs, and the intrinsic drawbacks of hematite still limit efficient photoelectrochemical (PEC) water splitting. Here, we successfully overcame the sluggish oxygen evolution reaction performance of hematite for water splitting by inserting zero-dimensional (0D) nanofragmented MXene (NFMX) as a hole transport material between the hematite and the OEC. The 0D NFMX was fabricated from two-dimensional (2D) MXene sheets and deposited onto the surface of a three-dimensional (3D) hematite photoanode via a centrifuge-assisted method without altering the inherent performance of the 2D MXene sheets. Among many OECs, NiFe(OH)x was selected as the OEC to improve hematite PEC performance in our system because of its efficient charge transport behavior and high stability. Because of the great synergy between NFMX and NiFe(OH)x, NiFe(OH)x/NFMX/Fe2O3 achieved a maximum photocurrent density of 3.09 mA cm-2 at 1.23 VRHE, which is 2.78-fold higher than that of α-Fe2O3 (1.11 mA cm-2). Furthermore, the poor stability of MXene in an aqueous solution for water splitting was resolved by uniformly coating it with NiFe(OH)x, after which it showed outstanding stability for 60 h at 1.23 VRHE. This study demonstrates the successful use of NFMX as a hole transport material combined with an OEC for highly efficient water splitting.

Dynamic semiconductor-electrolyte interface for sustainable solar water splitting over 600 hours under neutral conditions

Photoelectrochemical (PEC) water splitting that functions in pH-neutral electrolyte attracts increasing attention to energy demand sustainability. Here, we propose a strategy to in situ form a NiB layer by tuning the composition of the neutral electrolyte with the additions of nickel and borate species, which improves the PEC performance of the BiVO₄ photoanode. The NiB/BiVO₄ exhibits a photocurrent density of 6.0 mA cm^-2 at 1.23 V_RHE with an onset potential of 0.2 V_RHE under 1 sun illumination. The photoanode displays a photostability of over 600 hours in a neutral electrolyte. The additive of Ni²⁺ in the electrolyte, which efficiently inhibits the dissolution of NiB, can accelerate the photogenerated charge transfer and enhance the water oxidation kinetics. The borate species with B─O bonds act as a promoter of catalyst activity by accelerating proton-coupled electron transfer. The synergy effect of both species suppresses the surface charge recombination and inhibits the photocorrosion of BiVO₄.

Boosting Reactive Oxygen Species Generation Using Inter-Facet Edge Rich WO3 Arrays for Photoelectrochemical Conversion

Water oxidation reaction leaves room to be improved in the development of various solar fuel productions, because of the kinetically sluggish 4-electron transfer process of oxygen evolution reaction. In this work, we realize reactive oxygen species (ROS), H₂ O₂ and OH⋅, formations by water oxidation with total Faraday efficiencies of more than 90 % by using inter-facet edge (IFE) rich WO₃ arrays in an electrolyte containing CO₃ ^2- . Our results demonstrate that the IFE favors the adsorption of CO₃ ^2- while reducing the adsorption energy of OH⋅, as well as suppresses surface hole accumulation by direct 1-electron and indirect 2-electron transfer pathways. Finally, we present selective oxidation of benzyl alcohol by in situ using the formed OH⋅, which delivers a benzaldehyde production rate of ≈768 μmol h^-1 with near 100 % selectivity. This work offers a promising approach to tune or control the oxidation reaction in an aqueous solar fuel system towards high efficiency and value-added product.

Sulfur Vacancy-Rich CuS for Improved Surface-Enhanced Raman Spectroscopy and Full-Spectrum Photocatalysis

There are growing interests in the development of bifunctional semiconducting nanostructures for photocatalysis and real-time monitoring of degradation process on catalysts. Defect engineering is a low-cost approach to manipulating the properties of semiconductors. Herein, we prepared CuS nanoplates by a hydrothermal method at increasing amounts of thioacetamide (CS-1, CS-2, and CS-3) and investigated the influence of sulfur vacancy (V_s) on surface-enhanced Raman spectroscopy (SERS) and photocatalysis performance. SERS intensity of 4-nitrobenzenethiol on CS-3 is 346 and 17 times that of CS-1 and CS-2, respectively, and enhancement factor is 1.34 × 10⁴. Moreover, SERS is successfully applied to monitor the photodegradation of methyl orange. In addition, CS-3 also exhibited higher efficiency of Cr(VI) photoreduction than CS-1 and CS-2, and removal rate is 88%, 96%, and 73% under 2 h UV, 4 h visible, and 4 h near-infrared illumination, respectively. A systematic study including electron paramagnetic resonance spectra, photoelectrochemical measurements, and nitrogen adsorption isotherms were conducted to investigate the underlying mechanism. This work may help to understand the impact of vacancy defect on SERS and photocatalysis, and provide an effective and low-cost approach for the design of multifunctional materials.

Decoupling light absorption and carrier transport via heterogeneous doping in Ta3N5 thin film photoanode

The trade-off between light absorption and carrier transport in semiconductor thin film photoelectrodes is a major limiting factor of their solar-to-hydrogen efficiency for photoelectrochemical water splitting. Herein, we develop a heterogeneous doping strategy that combines surface doping with bulk gradient doping to decouple light absorption and carrier transport in a thin film photoelectrode. Taking La and Mg doped Ta₃N₅ thin film photoanode as an example, enhanced light absorption is achieved by surface La doping through alleviating anisotropic optical absorption, while efficient carrier transport in the bulk is maintained by the gradient band structure induced by gradient Mg doping. Moreover, the homojunction formed between the La-doped layer and the gradient Mg-doped layer further promotes charge separation. As a result, the heterogeneously doped photoanode yields a half-cell solar-to-hydrogen conversion efficiency of 4.07%, which establishes Ta₃N₅ as a leading performer among visible-light-responsive photoanodes. The heterogeneous doping strategy could be extended to other semiconductor thin film light absorbers to break performance trade-offs by decoupling light absorption and carrier transport.

Tuning the Nonradiative Electron-Hole Recombination with Defects in Monolayer Black Phosphorus

We use nonadiabatic (NA) molecular dynamics to demonstrate that the nonradiative electron-hole recombination is delayed and accelerated by the Stone-Wales (SWs) and phosphorus divacancy (DV-(5|7)) defects in monolayer black phosphorus (BP). Both types of defects increase the bandgap by 0.1 eV without creating midgap states. Driven by P-P stretching vibrations, the recombination proceeds within 1 ns in the SW and within 100 ps in the DV-(5|7), respectively, which occurs within 332 ps in BP. The SW defect slows down recombination because the notably reduced NA coupling combined with a large bandgap competes to the long-lived coherence. In contrast, the DV defect accelerates recombination since long-lived coherence is superior to the slightly decreased NA coupling correlated with a tiny increased bandgap. The diverse time scales rationalize the broad range of charge carrier lifetimes reported experimentally. The study provides a strategy to engineer excited-state dynamics for improving the BP-based optoelectronics.

Multi-Function of the Ni Interlayer in the Design of a BiVO4-Based Photoanode for Photoelectrochemical Water Splitting

BiVO₄ with an appropriate band structure is considered to be an ideal candidate for photoanodes. However, slow water oxidation kinetics and low charge separation efficiency seriously restrict its application. To address these issues, an NF/N/BVO photoanode with a hierarchical network structure was successfully constructed by direct-current magnetron sputtering of Ni followed by electrochemical deposition of nickel-iron layered double hydroxide (NiFe-LDH) on BiVO₄. A photocurrent density of 4.50 mA/cm² was obtained for NF/N/BVO, which was 2.4 times that for pristine BiVO₄. The introduction of the Ni layer contributed to the following growth of NiFe-LDH nanosheets with larger size, which acted as active sites and speeded up water oxidation kinetics. Furthermore, surface photovoltage microscopy revealed that Ni and NiFe-LDH acted as the electron collector and hole reservoir, respectively. The co-existence of the two components constituted a highly efficient surface charge separation structure, which was one of the important issues for the excellent water oxidation activity.

Fabrication of novel BiVO4/Bi2O3heterostructure with superior visible light induced photocatalytic properties

Heterostructure BiVO₄/Bi₂O₃nanocomposites with enhanced visible light activity are effectively synthesized through an easiest and single step hydrothermal route, using bismuth subnitrate and ammonium meta-vanadate as main raw materials in existence of citric acid. The phase and surface structure, topography and optical properties of synthesized composites are characterized by XRD, SEM, EDX, FTIR, UV-Visible and PL spectroscopy. It was found that 5%BiVO₄/Bi₂O₃(BOBV-5) nanocomposite exhibit excellent photocatalytic performance for rhodamine B dye degradation and tetracyclic under irradiation of visible light as compared to single component i.e. BiVO₄. The increased photocatalytic activity should be ascribed for making p-n heterojunction among p-type Bi₂O₃and n-type BiVO₄. This p-n heterojunction successfully reduce the recombination of photogenerated charge carriers. Furthermore, the BOBV-5 novel photocatalyst shows good stability in constructive five cycles and photocatalytic activity is best for conquering photo corrosion of a photocatalysts. To explain charge migration route, whole photocatalytic mechanism was described in terms of energy band structures. Furthermore, the present work is helpful effort for design of new visible light photocatalytic materials with heterojunction structures.

Low-bias photoelectrochemical water splitting via mediating trap states and small polaron hopping

Metal oxides are promising for photoelectrochemical (PEC) water splitting due to their robustness and low cost. However, poor charge carrier transport impedes their activity, particularly at low-bias voltage. Here we demonstrate the unusual effectiveness of phosphorus doping into bismuth vanadate (BiVO₄) photoanode for efficient low-bias PEC water splitting. The resulting BiVO₄ photoanode shows a separation efficiency of 80% and 99% at potentials as low as 0.6 and 1.0 V_RHE, respectively. Theoretical simulation and experimental analysis collectively verify that the record performance originates from the unique phosphorus-doped BiVO₄ configuration with concurrently mediated carrier density, trap states, and small polaron hopping. With NiFeO_x cocatalyst, the BiVO₄ photoanode achieves an applied bias photon-to-current efficiency of 2.21% at 0.6 V_RHE. The mechanistic understanding of the enhancement of BiVO₄ properties provides key insights in trap state passivation and polaron hopping for most photoactive metal oxides.

Enhancement in the photoelectrochemical performance of BiVO4 photoanode with high (040) facet exposure

Morphology and geometrical dimensions play crucial roles in the photoelectrochemical (PEC) performance of bismuth vanadate (BiVO₄) for water splitting. Decahedral BiVO₄ was synthesized through a facile hydrothermal process, which exhibited superior charge injection efficiency to the nanoporous counterpart prepared by the traditional method. More importantly, the crystal size and facet proportion of BiVO₄ decahedrons were facilely controlled. The charge separation efficiency can be significantly improved with a reduction in the crystal size and an increase in (040) facet exposure. A new method was developed for rate law analysis: illumination intensity-modulated oxygen evolution reaction rate versus open circuit potential difference, which suggested that the surface reaction kinetics was not affected by facet regulation. Furthermore, after decorating the FeOOH and NiOOH as dual oxygen evolution cocatalysts, an enhanced photocurrent density of 3.2 mA cm^-2 at 1.23 V versus reversible hydrogen electrode and interfacial charge injection efficiency of 97.0% can be reached. Our work inspires the development of facet-regulated BiVO₄ photoanodes with high charge injection efficiency in the PEC field and provides a feasible route to enhance its charge separation efficiency.

Boosting H2 Production from a BiVO4 Photoelectrochemical Biomass Fuel Cell by the Construction of a Bridge for Charge and Energy Transfer

Utilizing a photoelectrochemical (PEC) fuel cell to replace difficult water oxidation with facile oxidation of organic wastes is regarded as an effective method to improve the H₂ production efficiency. However, in most reported PEC fuel cells, their PEC activities are still low and the energy in organic fuels cannot be effectively utilized. Here, a unique BiVO₄ PEC fuel cell is successfully developed by utilizing the low-cost biomass, tartaric acid, as an organic fuel. Thanks to the strong complexation between BiVO₄ and tartaric acid, a bridge for the charge and energy transfer is successfully constructed, which not only improves the photoelectric conversion efficiency of BiVO₄ , but also effectively converts the chemical energy of biomass into H₂ . Remarkably, under AM1.5G illumination, the optimal nanoporous BiVO₄ photoanode exhibits a high current density of 13.54 mA cm^-2 at 1.23 V vs reversible hydrogen electrode (RHE) for H₂ production, which is higher than that of previously reported PEC water splitting systems or PEC fuel cell systems. This work opens a new path for solving the low PEC H₂ production efficiency and provides a new idea for improving the performances and energy conversion efficiency in traditional PEC fuel cells.

Coupling effect between hole storage and interfacial charge transfer over ultrathin CoPi-modified hematite photoanodes

Understanding the functionality of the modification layer in regulating the charge transfer process at the semiconductor/electrolyte interface is of great significance to the rational design of photoelectrocatalytic water oxidation systems. Herein, by systematically investigating and comparing the charge transfer kinetics behaviors over ferrihydrite (Fh)- and cobalt phosphate (CoPi)-modified hematite (Fe₂O₃) photoanodes, we unveiled the essential relation between photocurrent enhancement and the charge transfer process. With the hole-storage material Fh as a reference, it was found that CoPi demonstrates high hole-storage capacity at a low bias region (<1.0 V vs. RHE) due to the effective release of Fermi level pinning. Afterwards, the stored holes would be timely injected into the electrolyte for water oxidation, caused by the enhanced charge separation in the presence of CoPi. In contrast, the decoration of Fh can only slightly passivate the surface states and promote hole injection in the high potential region. Subsequently, superior hole-storage capacity in the low-potential region is recognized as a crucial factor for photocurrent enhancement. These combined results provide new insights into the understanding of interfacial charge transfer kinetics.

Activating a Semiconductor-Liquid Junction via Laser-Derived Dual Interfacial Layers for Boosted Photoelectrochemical Water Splitting

The semiconductor-liquid junction (SCLJ), the dominant place in photoelectrochemical (PEC) catalysis, determines the interfacial activity and stability of photoelectrodes, whcih directly affects the viability of PEC hydrogen generation. Though efforts dedicated in past decades, a challenge remains regarding creating a synchronously active and stable SCLJ, owing to the technical hurdles of simultaneously overlaying the two advantages. The present work demonstrates that creating an SCLJ with a unique configuration of the dual interfacial layers can yield BiVO₄ photoanodes with synchronously boosted photoelectrochemical activity and operational stability, with values located at the top in the records of such photoelectrodes. The bespoke dual interfacial layers, accessed via grafting laser-generated carbon dots with phenolic hydroxyl groups (LGCDs-PHGs), are experimentally verified effective, not only in generating the uniform layer of LGCDs with covalent anchoring for inhibited photocorrosion, but also in activating, respectively, the charge separation and transfer in each layer for boosted charge-carrier kinetics, resulting in FeNiOOH-LGCDs-PHGs-MBVO photoanodes with a dual configuration with the photocurrent density of 6.08 mA cm^-2 @ 1.23 V_RHE , and operational stability up to 120 h @ 1.23 V_RHE . Further work exploring LGCDs-PHGs from catecholic molecules warrants the proposed strategy as being a universal alternative for addressing the interfacial charge-carrier kinetics and operational stability of semiconductor photoelectrodes.

Photoelectrochemical Performance Improving Mechanism: Hybridization Appearing at the Energy Band of BiVO4 Photoanode by Doped Quantum Layers Modification

Surface passivation of the photoelectrode by wide bandgap semiconductor quantum layer is an important strategy to improve work stability and surface state inhibition. However, an inevitable energy barrier is generated during the quantum tunneling process of the photocarriers. To overcome this shortage, a tandem photo-generated hole transfer route is fabricated on BiVO₄ photoanode by doped dual-quantum layers modification, Ni-ZnO (5 nm) and Rh-SrTiO₃ (≈10 nm). Modulated photoelectrochemical (PEC), Scanning Kelvin Probe (SKP), and DFT calculation method results indicate that a tandem hole ohmic contact route is formed in the photoanode to reduce the quantum tunneling energy barrier, meanwhile, the photon absorption capacity of BiVO₄ is improved after doped quantum layers modification. Both a phenomenal attribute to the energy band hybridization between Ni, Rh 3d orbits in quantum layers with BiVO₄ photoanode. Then, the modified BiVO₄ photoanode achieves the recoded photocurrent density of 6.47 and 5.18 mA cm^-2 (Na₂ SO₃ electrolyte, V_RHE  = 1.23 V) under simulated sun light (100 mW cm^-2 AM 1.5 G) by xenon lamp illumination without and with UV composition cutting down to ≈5%, respectively. Generally, this work will highlight a potential application in the fields of PEC water splitting and photovoltaic conversion for various semiconductor nanomaterials.