Nanomechanics and co-transcriptional folding of Spinach and Mango

Isolation of novel fluorogenic RNA aptamers via in vitro compartmentalization using microbead-display libraries

Fluorogenic RNA aptamers, which specifically bind to fluorogens and dramatically enhance their fluorescence, are valuable for imaging and detecting RNAs and metabolites in living cells. Most fluorogenic RNA aptamers have been identified and engineered through iterative rounds of in vitro selection based on their binding to target fluorogens. While such selection is an efficient approach for generating RNA aptamers, it is less efficient for isolating fluorogenic aptamers because it does not directly screen for fluorogenic properties. In this study, we combined a fluorescence-based in vitro selection technique using water-in-oil microdroplets with an affinity-based selection technique to obtain fluorogenic RNA aptamers. This approach allowed us to identify novel fluorogenic aptamers for a biotin-modified thiazole orange derivative. Our results demonstrate that our approach can expand the diversity of fluorogenic RNA aptamers, thus leading to new applications for the imaging and detection of biomolecules.

High-throughput, fluorescent-aptamer-based measurements of steady-state transcription rates for the Mycobacterium tuberculosis RNA polymerase

The first step in gene expression is the transcription of DNA sequences into RNA. Regulation at the level of transcription leads to changes in steady-state concentrations of RNA transcripts, affecting the flux of downstream functions and ultimately cellular phenotypes. Changes in transcript levels are routinely followed in cellular contexts via genome-wide sequencing techniques. However, in vitro mechanistic studies of transcription have lagged with respect to throughput. Here, we describe the use of a real-time, fluorescent-aptamer-based method to quantitate steady-state transcription rates of the Mycobacterium tuberculosis RNA polymerase. We present clear controls to show that the assay specifically reports on promoter-dependent, full-length RNA transcription rates that are in good agreement with the kinetics determined by gel-resolved, α-32P NTP incorporation experiments. We illustrate how the time-dependent changes in fluorescence can be used to measure regulatory effects of nucleotide concentrations and identity, RNAP and DNA concentrations, transcription factors, and antibiotics. Our data showcase the ability to easily perform hundreds of parallel steady-state measurements across varying conditions with high precision and reproducibility to facilitate the study of the molecular mechanisms of bacterial transcription.

Understanding spatiotemporal coupling of gene expression using single molecule RNA imaging technologies

Across all kingdoms of life, gene regulatory mechanisms underlie cellular adaptation to ever-changing environments. Regulation of gene expression adjusts protein synthesis and, in turn, cellular growth. Messenger RNAs are key molecules in the process of gene expression. Our ability to quantitatively measure mRNA expression in single cells has improved tremendously over the past decades. This revealed an unexpected coordination between the steps that control the life of an mRNA, from transcription to degradation. Here, we provide an overview of the state-of-the-art imaging approaches for measurement and quantitative understanding of gene expression, starting from the early visualizations of single genes by electron microscopy to current fluorescence-based approaches in single cells, including live-cell RNA-imaging approaches to FISH-based spatial transcriptomics across model organisms. We also highlight how these methods have shaped our current understanding of the spatiotemporal coupling between transcriptional and post-transcriptional events in prokaryotes. We conclude by discussing future challenges of this multidisciplinary field.Abbreviations: mRNA: messenger RNA; rRNA: ribosomal rDNA; tRNA: transfer RNA; sRNA: small RNA; FISH: fluorescence in situ hybridization; RNP: ribonucleoprotein; smFISH: single RNA molecule FISH; smiFISH: single molecule inexpensive FISH; HCR-FISH: Hybridization Chain-Reaction-FISH; RCA: Rolling Circle Amplification; seqFISH: Sequential FISH; MERFISH: Multiplexed error robust FISH; UTR: Untranslated region; RBP: RNA binding protein; FP: fluorescent protein; eGFP: enhanced GFP, MCP: MS2 coat protein; PCP: PP7 coat protein; MB: Molecular beacons; sgRNA: single guide RNA.

A light-up fluorescence platform based DNA: RNA hybrid G-quadruplet for detecting single nucleotide variant of ctDNA and miRNA-21

The nucleic acid assay is an area of great concern in the diagnosis and treatment of breast cancer. Here, we developed a DNA: RNA hybrid G-quadruplet (HQ) detection platform based on strand displacement amplification (SDA) and Baby Spinach RNA aptamer for single nucleotide variant (SNV) of circulating tumor DNA (ctDNA) and miRNA-21. This was the first in vitro construction of HQ for the biosensor. It found that HQ had much stronger ability to switch on fluorescence of DFHBI-1T than Baby Spinach RNA alone. Taking advantage of the platform and the FspI enzyme with high specificity, the biosensor achieved ultra-sensitive detection of SNV of the ctDNA (PIK3CA ^H1047R gene) and miRNA-21. The light-up biosensor had high anti-interference ability in complex actual samples. Hence, the label-free biosensor provided a sensitive and accurate method for early diagnosis of breast cancer. Moreover, it opened a new application model for RNA aptamers.

High-throughput, fluorescent-aptamer-based measurements of steady-state transcription rates for Mycobacterium tuberculosis RNA polymerase

The first step in gene expression is the transcription of DNA sequences into RNA. Regulation at the level of transcription leads to changes in steady-state concentrations of RNA transcripts, affecting the flux of downstream functions and ultimately cellular phenotypes. Changes in transcript levels are routinely followed in cellular contexts via genome-wide sequencing techniques. However, in vitro mechanistic studies of transcription have lagged with respect to throughput. Here, we describe the use of a real-time, fluorescent-aptamer-based method to quantitate steady-state transcription rates of the Mycobacterium tuberculosis RNA polymerase. We present clear controls to show that the assay specifically reports on promoter-dependent, full-length RNA transcription rates that are in good agreement with the kinetics determined by gel-resolved, α- 32 P NTP incorporation experiments. We illustrate how the time-dependent changes in fluorescence can be used to measure regulatory effects of nucleotide concentrations and identity, RNAP and DNA concentrations, transcription factors, and antibiotics. Our data showcase the ability to easily perform hundreds of parallel steady-state measurements across varying conditions with high precision and reproducibility to facilitate the study of the molecular mechanisms of bacterial transcription.

Significance Statement

RNA polymerase transcription mechanisms have largely been determined from in vitro kinetic and structural biology methods. In contrast to the limited throughput of these approaches, in vivo RNA sequencing provides genome-wide measurements but lacks the ability to dissect direct biochemical from indirect genetic mechanisms. Here, we present a method that bridges this gap, permitting high-throughput fluorescence-based measurements of in vitro steady-state transcription kinetics. We illustrate how an RNA-aptamer-based detection system can be used to generate quantitative information on direct mechanisms of transcriptional regulation and discuss the far-reaching implications for future applications.

Single Molecule FRET Analysis of CRISPR Cas9 Single Guide RNA Folding Dynamics

CRISPR Cas9 is an RNA guided endonuclease that is part of a bacterial adaptive immune system. Single guide RNA (sgRNA) can be designed to target genomic DNA, making Cas9 a programmable DNA binding/cutting enzyme and allowing applications such as epigenome editing, controlling transcription, and targeted DNA insertion. Some of the main hurdles against an even wider adoption are off-target effects and variability in Cas9 editing outcomes. Most studies that aim to understand the mechanisms that underlie these two areas have focused on Cas9 DNA binding, DNA unwinding, and target cleavage. The assembly of Cas9 RNA ribonucleoprotein complex (RNP) precedes all these steps and includes sgRNA folding and Cas9 binding to sgRNA. We know from the crystal structure of the Cas9 RNP what the final sgRNA conformation is. However, the assembly dynamics has not been studied in detail and a better understanding of RNP assembly could lead to better-designed sgRNAs and better editing outcomes. To study this process, we developed a single molecule FRET assay to monitor the conformation of the sgRNA and the binding of Cas9 to sgRNA. We labeled the sgRNA with a donor fluorophore and an acceptor fluorophore such that when the sgRNA folds, there are changes in FRET efficiency. We measured sgRNA folding dynamics under different ion conditions, under various methods of folding (refolding vs vectorial), and with or without Cas9. sgRNA that closely mimics the sgRNA construct used for high resolution structural analysis of the Cas9-gRNA complex showed two main FRET states without Cas9, and Cas9 addition shifted the distribution toward the higher FRET state attributed to the properly assembled complex. Even in the absence of Cas9, folding the sgRNA vectorially using a superhelicase-dependent release of the sgRNA in the direction of transcription resulted in almost exclusively high FRET state. An addition of Cas9 during vectorial folding greatly reduced a slow-folding fraction. Our studies shed light on the heterogeneous folding dynamics of sgRNA and the impact of co-transcriptional folding and Cas9 binding in sgRNA folding. Further studies of sequence dependence may inform rational design of sgRNAs for optimal function.

DNA-RNA hybrid G-quadruplex tends to form near the 3' end of telomere overhang

Telomeric repeat-containing RNA (TERRA) has been suggested to participate in telomere maintenance. TERRA consisting of UUAGGG repeats is capable of forming an intermolecular G-quadruplex (GQ) with single-stranded TTAGGG-repeat DNA in the telomere 3' overhang. To explore the structural features and potential functions of this DNA-RNA hybrid GQ (HGQ), we used single-molecule FRET to study the folding patterns of DNA with four to seven telomeric tandem repeats annealed with a short RNA consisting of two or five telomeric repeats. Our data highlight that RNA prefers to form DNA-RNA HGQ near the 3' end of telomeric DNA. Furthermore, the unfolding of secondary structures by a complementary C-rich sequence was observed for DNA GQ but not for DNA-RNA HGQ, which demonstrated the enhanced stability of the telomere 3' end via hybridization with RNA. These conformational and physical properties of telomeric DNA-RNA HGQ suggest that TERRA might limit access to the 3' end of the telomeric DNA overhang, which is known to be critical for the interaction with telomerase and other telomere-associated proteins.

Programming cell-free biosensors with DNA strand displacement circuits

Cell-free biosensors are powerful platforms for monitoring human and environmental health. Here, we expand their capabilities by interfacing them with toehold-mediated strand displacement circuits, a dynamic DNA nanotechnology that enables molecular computation through programmable interactions between nucleic acid strands. We develop design rules for interfacing a small molecule sensing platform called ROSALIND with toehold-mediated strand displacement to construct hybrid RNA–DNA circuits that allow fine-tuning of reaction kinetics. We use these design rules to build 12 different circuits that implement a range of logic functions (NOT, OR, AND, IMPLY, NOR, NIMPLY, NAND). Finally, we demonstrate a circuit that acts like an analog-to-digital converter to create a series of binary outputs that encode the concentration range of the molecule being detected. We believe this work establishes a pathway to create ‘smart’ diagnostics that use molecular computations to enhance the speed and utility of biosensors.

Equipping ROSALIND, a cell-free biosensing platform, with information processing circuits based on toehold-mediated DNA strand displacement enhances sensor performance and enables logic gate computation.

Toehold-mediated strand displacement to measure released product from self-cleaving ribozymes

This paper presents a probe comprising a fluorophore and a quencher, enabling measurement of released product from self-cleaving hammerhead ribozyme, without labeled RNA molecules, regular sampling or use of polyacrylamide gels. The probe is made of two DNA strands; one strand is labeled with a fluorophore at its 5'-end, while the other strand is labeled with a quencher at its 3'-end. These two DNA strands are perfectly complementary, but with a 3'-overhang of the fluorophore strand. These unpaired nucleotides act as a toehold, which is utilized by a detached cleaved fragment (coming from a self-cleaving hammerhead ribozyme) as the starting point for a strand displacement reaction. This reaction causes the separation of the fluorophore strand from the quencher strand, culminating in fluorescence, detectable in a plate reader. Notably, the emitted fluorescence is proportional to the amount of detached cleaved-off RNAs, displacing the DNA quencher strand. This method can replace or complement radio-hazardous unstable ³²P as a method of measurement of the product release from ribozyme cleavage reactions; it also eliminates the need for polyacrylamide gels, for the same purpose. Critically, this method allows to distinguish between the total amount of cleaved ribozymes and the amount of detached fragments, resulting from that cleavage reaction.

Development of the DNA-based biosensors for high performance in detection of molecular biomarkers: More rapid, sensitive, and universal

The molecular biomarkers are molecules that are closely related to specific physiological states. Numerous molecular biomarkers have been identified as targets for disease diagnosis and biological research. To date, developing highly efficient probes for the precise detection of biomarkers has become an attractive research field which is very important for biological and biochemical studies. During the past decades, not only the small chemical probe molecules but also the biomacromolecules such as enzymes, antibodies, and nucleic acids have been introduced to construct of biosensor platform to achieve the detection of biomarkers in a highly specific and highly efficient way. Nevertheless, improving the performance of the biosensors, especially in clinical applications, is still in urgent demand in this field. A noteworthy example is the Corona Virus Disease 2019 (COVID-19) that breaks out globally in a short time in 2020. The COVID-19 was caused by the virus called SARS-CoV-2. Early diagnosis is very important to block the infection of the virus. Therefore, during these months scientists have developed dozens of methods to achieve rapid and sensitive detection of the virus. Nowadays some of these new methods have been applied for producing the commercial detection kit and help people against the disease worldwide. DNA-based biosensors are useful tools that have been widely applied in the detection of molecular biomarkers. The good stability, high specificity, and excellent biocompatibility make the DNA-based biosensors versatile in application both in vitro and in vivo. In this paper, we will review the major methods that emerged in recent years on the design of DNA-based biosensors and their applications. Moreover, we will also briefly discuss the possible future direction of DNA-based biosensors design. We believe this is helpful for people interested in not only the biosensor field but also in the field of analytical chemistry, DNA nanotechnology, biology, and disease diagnosis.

Rhodamine 6G-Ligand Influencing G-Quadruplex Stability and Topology

The involvement of G-quadruplex (G4) structures in nucleic acids in various molecular processes in cells such as replication, gene-pausing, the expression of crucial cancer-related genes and DNA damage repair is well known. The compounds targeting G4 usually bind directly to the G4 structure, but some ligands can also facilitate the G4 folding of unfolded G-rich sequences and stabilize them even without the presence of monovalent ions such as sodium or potassium. Interestingly, some G4-ligand complexes can show a clear induced CD signal, a feature which is indirect proof of the ligand interaction. Based on the dichroic spectral profile it is not only possible to confirm the presence of a G4 structure but also to determine its topology. In this study we examine the potential of the commercially available Rhodamine 6G (RhG) as a G4 ligand. RhG tends to convert antiparallel G4 structures to parallel forms in a manner similar to that of Thiazole Orange. Our results confirm the very high selectivity of this ligand to the G4 structure. Moreover, the parallel topology of G4 can be verified unambiguously based on the specific induced CD profile of the G4-RhG complex. This feature has been verified on more than 50 different DNA sequences forming various non-canonical structural motifs.

Intracellular mRNA transport and localized translation

Fine-tuning cellular physiology in response to intracellular and environmental cues requires precise temporal and spatial control of gene expression. High-resolution imaging technologies to detect mRNAs and their translation state have revealed that all living organisms localize mRNAs in subcellular compartments and create translation hotspots, enabling cells to tune gene expression locally. Therefore, mRNA localization is a conserved and integral part of gene expression regulation from prokaryotic to eukaryotic cells. In this Review, we discuss the mechanisms of mRNA transport and local mRNA translation across the kingdoms of life and at organellar, subcellular and multicellular resolution. We also discuss the properties of messenger ribonucleoprotein and higher order RNA granules and how they may influence mRNA transport and local protein synthesis. Finally, we summarize the technological developments that allow us to study mRNA localization and local translation through the simultaneous detection of mRNAs and proteins in single cells, mRNA and nascent protein single-molecule imaging, and bulk RNA and protein detection methods.

Broad Applications of Thiazole Orange in Fluorescent Sensing of Biomolecules and Ions

Fluorescent sensing of biomolecules has served as a revolutionary tool for studying and better understanding various biological systems. Therefore, it has become increasingly important to identify fluorescent building blocks that can be easily converted into sensing probes, which can detect specific targets with increasing sensitivity and accuracy. Over the past 30 years, thiazole orange (TO) has garnered great attention due to its low fluorescence background signal and remarkable 'turn-on' fluorescence response, being controlled only by its intramolecular torsional movement. These features have led to the development of numerous molecular probes that apply TO in order to sense a variety of biomolecules and metal ions. Here, we highlight the tremendous progress made in the field of TO-based sensors and demonstrate the different strategies that have enabled TO to evolve into a versatile dye for monitoring a collection of biomolecules.

Photophysics of DFHBI bound to RNA aptamer Baby Spinach

The discovery of the GFP-type dye DFHBI that becomes fluorescent upon binding to an RNA aptamer, termed Spinach, led to the development of a variety of fluorogenic RNA systems that enable genetic encoding of living cells. In view of increasing interest in small RNA aptamers and the scarcity of their photophysical characterisation, this paper is a model study on Baby Spinach, a truncated Spinach aptamer with half its sequence. Fluorescence and fluorescence excitation spectra of DFHBI complexes of Spinach and Baby Spinach are known to be similar. Surprisingly, a significant divergence between absorption and fluorescence excitation spectra of the DFHBI/RNA complex was observed on conditions of saturation at large excess of RNA over DFHBI. Since absorption spectra were not reported for any Spinach-type aptamer, this effect is new. Quantitative modelling of the absorption spectrum based on competing dark and fluorescent binding sites could explain it. However, following reasoning of fluorescence lifetimes of bound DFHBI, femtosecond-fluorescence lifetime profiles would be more supportive of the notion that the abnormal absorption spectrum is largely caused by trans-isomers formed  within the cis-bound DFHBI/RNA complex. Independent of the origin, the unexpected discrepancy between absorption and fluorescence excitation spectra allows for easily accessed screening and insight into the efficiency of a fluorogenic dye/RNA system.

Recent Developments in Aptasensors for Diagnostic Applications

Aptamers are exciting smart molecular probes for specific recognition of disease biomarkers. A number of strategies have been developed to convert target-aptamer binding into physically detectable signals. Since the aptamer sequence was first discovered, a large variety of aptamer-based biosensors have been developed, with considerable attention paid to their potential applications in clinical diagnostics. So far, a variety of techniques in combination with a wide range of functional nanomaterials have been used for the design of aptasensors to further improve the sensitivity and detection limit of target determination. In this paper, the advantages of aptamers over traditional antibodies as the molecular recognition components in biosensors for high-throughput screening target molecules are highlighted. Aptamer-target pairing configurations are predominantly single- or dual-site binding; the design of recognition modes of each aptamer-target pairing configuration is described. Furthermore, signal transduction strategies including optical, electrical, mechanical, and mass-sensitive modes are clearly explained together with examples. Finally, we summarize the recent progress in the development of aptamer-based biosensors for clinical diagnosis, including detection of cancer and disease biomarkers and in vivo molecular imaging. We then conclude with a discussion on the advanced development and challenges of aptasensors.

Real-time monitoring of single ZTP riboswitches reveals a complex and kinetically controlled decision landscape

RNAs begin to fold and function during transcription. Riboswitches undergo cotranscriptional switching in the context of transcription elongation, RNA folding, and ligand binding. To investigate how these processes jointly modulate the function of the folate stress-sensing Fusobacterium ulcerans ZTP riboswitch, we apply a single-molecule vectorial folding (VF) assay in which an engineered superhelicase Rep-X sequentially releases fluorescently labeled riboswitch RNA from a heteroduplex in a 5′-to-3′ direction, at ~60 nt s⁻¹ [comparable to the speed of bacterial RNA polymerase (RNAP)]. We demonstrate that the ZTP riboswitch is kinetically controlled and that its activation is favored by slower unwinding, strategic pausing between but not before key folding elements, or a weakened transcription terminator. Real-time single-molecule monitoring captures folding riboswitches in multiple states, including an intermediate responsible for delayed terminator formation. These results show how individual nascent RNAs occupy distinct channels within the folding landscape that controls the fate of the riboswitch.

Many RNAs become functional before their synthesis completes. Here the authors employ a single-molecule vectorial folding assay mimicking RNA transcription and show that the ZTP riboswitch is kinetically controlled and activated by slower unwinding and strategic pausing.

Streamlining effects of extra telomeric repeat on telomeric DNA folding revealed by fluorescence-force spectroscopy

A human telomere ends in a single-stranded 3′ tail, composed of repeats of T₂AG₃. G-quadruplexes (GQs) formed from four consecutive repeats have been shown to possess high-structural and mechanical diversity. In principle, a GQ can form from any four repeats that are not necessarily consecutive. To understand the dynamics of GQs with positional multiplicity, we studied five and six repeats human telomeric sequence using a combination of single molecule FRET and optical tweezers. Our results suggest preferential formation of GQs at the 3′ end both in K⁺ and Na⁺ solutions, with minor populations of 5′-GQ or long-loop GQs. A vectorial folding assay which mimics the directional nature of telomere extension showed that the 3′ preference holds even when folding is allowed to begin from the 5′ side. In 100 mM K⁺, the unassociated T₂AG₃ segment has a streamlining effect in that one or two mechanically distinct species was observed at a single position instead of six or more observed without an unassociated repeat. We did not observe such streamlining effect in 100 mM Na⁺. Location of GQ and reduction in conformational diversity in the presence of extra repeats have implications in telomerase inhibition, T-loop formation and telomere end protection.