A partially self-regenerating synthetic cell

Towards Self-regeneration: Exploring the Limits of Protein Synthesis in the Protein Synthesis Using Recombinant Elements (PURE) Cell-free Transcription-Translation System

Self-regeneration is a key function of living systems that needs to be recapitulated in vitro to create a living synthetic cell. A major limiting factor for protein self-regeneration in the PURE cell-free transcription-translation system is its high protein concentration, which far exceeds the system's protein synthesis rate. Here, we were able to drastically reduce the nonribosomal PURE protein concentration up to 97.3% while increasing protein synthesis efficiency. Although crowding agents were not effective in the original PURE formulation, we found that in highly dilute PURE formulations, addition of 6% dextran considerably increased protein synthesis rate and total protein yield. These new PURE formulations will be useful for many cell-free synthetic biology applications, and we estimate that PURE can now support the complete self-regeneration of all 36 nonribosomal proteins, which is a critical step toward the development of a universal biochemical constructor and living synthetic cell.

Cell-Free Gene Expression in Bioprinted Fluidic Networks

The realization of soft robotic devices with life-like properties requires the engineering of smart, active materials that can respond to environmental cues in similar ways as living cells or organisms. Cell-free expression systems provide an approach for embedding dynamic molecular control into such materials that avoids many of the complexities associated with genuinely living systems. Here, we present a strategy to integrate cell-free protein synthesis within agarose-based hydrogels that can be spatially organized and supplied by a synthetic vasculature. We first utilize an indirect printing approach with a commercial bioprinter and Pluronic F-127 as a fugitive ink to define fluidic channel structures within the hydrogels. We then investigate the impact of the gel matrix on the expression of proteins in E. coli cell-extract, which is found to depend on the gel density and the dilution of the expression system. When supplying the vascularized hydrogels with reactants, larger components such as DNA plasmids are confined to the channels or immobilized in the gels while nanoscale reaction components can diffusively spread within the gel. Using a single supply channel, we demonstrate different spatial protein concentration profiles emerging from different cell-free gene circuits comprising production, gene activation, and negative feedback. Variation of the channel design allows the creation of specific concentration profiles such as a long-term stable gradient or the homogeneous supply of a hydrogel with proteins.

Optimizing in vitro expression balance of central dogma-related genes using parallel reaction monitoring

The creation of a self-replicating synthetic cell is an essential to understand life self-replication. One method to create self-replicating artificial cells is to reconstitute the self-replication system of living organisms in vitro. In a living cell, self-replication is achieved via a system called the autonomous central dogma, a system in which central dogma-related factors are autonomously synthesized and genome replication, transcription, and translation are driven by nascent factors. Various studies to reconstitute some processes of the autonomous central dogma in vitro have been conducted. However, in vitro reconstitution of the entire autonomous central dogma system is difficult as it requires balanced expression of several related genes. Therefore, we developed a method to simultaneously quantify and optimize the in vitro expression balance of multiple genes. First, we developed a quantitative mass spectrometry method targeting genome replication-related proteins as a model of central dogma-related factors and acquired in vitro expression profiles of these genes. Additionally, we demonstrated that the in vitro expression balance of these genes can be easily optimized by adjusting the input gene ratio based on the data obtained by the developed method. This study facilitated the easy optimization of the in vitro expression balance of multiple genes. Therefore, extending the scope of this method to other central dogma-related factors will accelerate attempts of self-replicating synthetic cells creation.

Integrated translation and metabolism in a partially self-synthesizing biochemical network

One of the hallmarks of living organisms is their capacity for self-organization and regeneration, which requires a tight integration of metabolic and genetic networks. We sought to construct a linked metabolic and genetic network in vitro that shows such lifelike behavior outside of a cellular context and generates its own building blocks from nonliving matter. We integrated the metabolism of the crotonyl-CoA/ethyl-malonyl-CoA/hydroxybutyryl-CoA cycle with cell-free protein synthesis using recombinant elements. Our network produces the amino acid glycine from CO2 and incorporates it into target proteins following DNA-encoded instructions. By orchestrating ~50 enzymes we established a basic cell-free operating system in which genetically encoded inputs into a metabolic network are programmed to activate feedback loops allowing for self-integration and (partial) self-regeneration of the complete system.

Broccoli aptamer allows quantitative transcription regulation studies in vitro

Quantitative transcription regulation studies in vivo and in vitro often make use of reporter proteins. Here we show that using Broccoli aptamers, quantitative study of transcription in various regulatory scenarios is possible without a translational step. To explore the method we studied several regulatory scenarios that we analyzed using thermodynamic occupancy-based models, and found excellent agreement with previous studies. In the next step we show that non-coding DNA can have a dramatic effect on the level of transcription, similar to the influence of the lac repressor with a strong affinity to operator sites. Finally, we point out the limitations of the method in terms of delay times coupled to the folding of the aptamer. We conclude that the Broccoli aptamer is suitable for quantitative transcription measurements.

Role of Natural Binding Proteins in Therapy and Diagnostics

This review systematically investigates the critical role of natural binding proteins (NBPs), encompassing DNA-, RNA-, carbohydrate-, fatty acid-, and chitin-binding proteins, in the realms of oncology and diagnostics. In an era where cancer continues to pose significant challenges to healthcare systems worldwide, the innovative exploration of NBPs offers a promising frontier for advancing both the diagnostic accuracy and therapeutic efficacy of cancer management strategies. This manuscript provides an in-depth examination of the unique mechanisms by which NBPs interact with specific molecular targets, highlighting their potential to revolutionize cancer diagnostics and therapy. Furthermore, it discusses the burgeoning research on aptamers, demonstrating their utility as 'nucleic acid antibodies' for targeted therapy and precision diagnostics. Despite the promising applications of NBPs and aptamers in enhancing early cancer detection and developing personalized treatment protocols, this review identifies a critical knowledge gap: the need for comprehensive studies to understand the diverse functionalities and therapeutic potentials of NBPs across different cancer types and diagnostic scenarios. By bridging this gap, this manuscript underscores the importance of NBPs and aptamers in paving the way for next-generation diagnostics and targeted cancer treatments.

Self-lysis microbial consortia for predictable multi-proteins assembly

The scope of bioengineering is expanding from the design of single strain to the microbial communities, allowing for the division-of-labor in synthesizing the multi-protein systems. Predicting the composition of the final product during the biomanufacturing process, however, can be difficult. Consortia-based manufacturing has the potential to boost production efficiency, but this benefit primarily holds in the upstream. The current format of downstream process heavily relies on the centralized facility, and is not economical and flexible to address the demands in small-scale. Here, we present a concise and manageable platform to enable the multi-protein system assembly. We engineer a self-lysis microbial consortium, where each strain lyses autonomously at high densities and produces a single protein component. The product fraction can be precisely tuned by varying the inoculation ratio. Utilizing this platform, we assemble a classical 34-component PURE (protein synthesis using recombinant elements) system. We have further optimized the downstream process of the biomanufacturing by incorporating the porous structure of polymeric materials. The encapsulated autolysis consortium can produce and release the proteins while maintaining the cell factories enclosed in the materials by exporting the multi-protein system for collection. Our research provides a novel approach to the flexible and controllable production of multi-protein systems, opening up new possibilities for pathway assembly and portable biomanufacturing.

A genetic circuit on a single DNA molecule as an autonomous dissipative nanodevice

Realizing genetic circuits on single DNA molecules as self-encoded dissipative nanodevices is a major step toward miniaturization of autonomous biological systems. A circuit operating on a single DNA implies that genetically encoded proteins localize during coupled transcription-translation to DNA, but a single-molecule measurement demonstrating this has remained a challenge. Here, we use a genetically encoded fluorescent reporter system with improved temporal resolution and observe the synthesis of individual proteins tethered to a DNA molecule by transient complexes of RNA polymerase, messenger RNA, and ribosome. Against expectations in dilute cell-free conditions where equilibrium considerations favor dispersion, these nascent proteins linger long enough to regulate cascaded reactions on the same DNA. We rationally design a pulsatile genetic circuit by encoding an activator and repressor in feedback on the same DNA molecule. Driven by the local synthesis of only several proteins per hour and gene, the circuit dynamics exhibit enhanced variability between individual DNA molecules, and fluctuations with a broad power spectrum. Our results demonstrate that co-expressional localization, as a nonequilibrium process, facilitates single-DNA genetic circuits as dissipative nanodevices, with implications for nanobiotechnology applications and artificial cell design.

One-Pot De Novo Synthesis of [4Fe-4S] Proteins Using a Recombinant SUF System under Aerobic Conditions

Fe-S clusters are essential cofactors mediating electron transfer in respiratory and metabolic networks. However, obtaining active [4Fe-4S] proteins with heterologous expression is challenging due to (i) the requirements for [4Fe-4S] cluster assembly, (ii) the O2 lability of [4Fe-4S] clusters, and (iii) copurification of undesired proteins (e.g., ferredoxins). Here, we established a facile and efficient protocol to express mature [4Fe-4S] proteins in the PURE system under aerobic conditions. An enzyme aconitase and thermophilic ferredoxin were selected as model [4Fe-4S] proteins for functional verification. We first reconstituted the SUF system in vitro via a stepwise manner using the recombinant SUF subunits (SufABCDSE) individually purified from E. coli. Later, the incorporation of recombinant SUF helper proteins into the PURE system enabled mRNA translation-coupled [4Fe-4S] cluster assembly under the O2-depleted conditions. To overcome the O2 lability of [4Fe-4S] Fe-S clusters, an O2-scavenging enzyme cascade was incorporated, which begins with formate oxidation by formate dehydrogenase for NADH regeneration. Later, NADH is consumed by flavin reductase for FADH2 regeneration. Finally, bifunctional flavin reductase, along with catalase, removes O2 from the reaction while supplying FADH2 to the SufBC2D complex. These amendments enabled a one-pot, two-step synthesis of mature [4Fe-4S] proteins under aerobic conditions, yielding holo-aconitase with a maximum concentration of ∼0.15 mg/mL. This renovated system greatly expands the potential of the PURE system, paving the way for the future reconstruction of redox-active synthetic cells and enhanced cell-free biocatalysis.

On biochemical constructors and synthetic cells

Is it possible to build life? More specifically, is it possible to create a living synthetic cell from inanimate building blocks? This question precipitated into one of the most significant grand challenges in biochemistry and synthetic biology, with several large research consortia forming around this endeavour in Europe (European Synthetic Cell Initiative), the USA (Build-a-Cell Initiative) and Japan (Japanese Society for Cell Synthesis Research). The mature field of biochemistry, the advent of synthetic biology in the early 2000s, and the burgeoning field of cell-free synthetic biology made it feasible to tackle this grand challenge.

Engineering tRNA abundances for synthetic cellular systems

Routinizing the engineering of synthetic cells requires specifying beforehand how many of each molecule are needed. Physics-based tools for estimating desired molecular abundances in whole-cell synthetic biology are missing. Here, we use a colloidal dynamics simulator to make predictions for how tRNA abundances impact protein synthesis rates. We use rational design and direct RNA synthesis to make 21 synthetic tRNA surrogates from scratch. We use evolutionary algorithms within a computer aided design framework to engineer translation systems predicted to work faster or slower depending on tRNA abundance differences. We build and test the so-specified synthetic systems and find qualitative agreement between expected and observed systems. First principles modeling combined with bottom-up experiments can help molecular-to-cellular scale synthetic biology realize design-build-work frameworks that transcend tinker-and-test.

Investigation of Compatibility between DNA Replication, Transcription, and Translation for in Vitro Central Dogma

Recent advances in in vitro synthetic biology have made it possible to reconstitute various cellular functions in a test tube. However, the integration of these functions remains a major challenge. This study aimed to identify a suitable condition to achieve all three reactions that constitute the central dogma: transcription, translation, and DNA replication. Specifically, we investigated the effect of the concentrations of 11 nonprotein factors required for in vitro transcription, translation, and DNA replication on each of these reactions. Our results indicate that certain factors have opposing effects on the three reactions. For example, while dNTP is necessary for DNA replication, it inhibited translation, and both rNTP and tRNA, which are essential for transcription and translation, inhibited DNA replication with several DNA polymerases. We also found that these opposing effects were partially alleviated by optimizing the magnesium concentration. Using this knowledge, we successfully demonstrated transcription/translation-coupled DNA replication with higher levels of transcription and translation while maintaining a certain level of DNA replication. These findings not only provide useful insights for the development of a complex artificial system with the central dogma but also raise the question of how natural cells overcome the incompatibility between the three reactions.

In Vitro Transcription/Translation-Coupled DNA Replication through Partial Regeneration of 20 Aminoacyl-tRNA Synthetases

The in vitro reconstruction of life-like self-reproducing systems is a major challenge in in vitro synthetic biology. Self-reproduction requires regeneration of all molecules involved in DNA replication, transcription, and translation. This study demonstrated the continuous DNA replication and partial regeneration of major translation factors, 20 aminoacyl-tRNA synthetases (aaRS), in a reconstituted transcription/translation system (PURE system) for the first time. First, we replicated each DNA that encodes one of the 20 aaRSs through aaRS expression from the DNA by serial transfer experiments. Thereafter, we successively increased the number of aaRS genes and achieved simultaneous, continuous replication of DNA that encodes all 20 aaRSs, which comprised approximately half the number of protein factors in the PURE system, except for ribosomes, by employing dialyzed reaction and sequence optimization. This study provides a step-by-step methodology for continuous DNA replication with an increasing number of self-regenerative genes toward self-reproducing artificial systems.

The Long Road to a Synthetic Self-Replicating Central Dogma

The construction of a biochemical system capable of self-replication is a key objective in bottom-up synthetic biology. Throughout the past two decades, a rapid progression in the design of in vitro cell-free systems has provided valuable insight into the requirements for the development of a minimal system capable of self-replication. The main limitations of current systems can be attributed to their macromolecular composition and how the individual macromolecules use the small molecules necessary to drive RNA and protein synthesis. In this Perspective, we discuss the recent steps that have been taken to generate a minimal cell-free system capable of regenerating its own macromolecular components and maintaining the homeostatic balance between macromolecular biogenesis and consumption of primary building blocks. By following the flow of biological information through the central dogma, we compare the current versions of these systems to date and propose potential alterations aimed at designing a model system for self-replicative synthetic cells.

Multiscale Biofabrication: Integrating Additive Manufacturing with DNA-Programmable Self-Assembly

Structure and hierarchical organization are crucial elements of biological systems and are likely required when engineering synthetic biomaterials with life-like behavior. In this context, additive manufacturing techniques like bioprinting have become increasingly popular. However, 3D bioprinting, as well as other additive manufacturing techniques, show limited resolution, making it difficult to yield structures on the sub-cellular level. To be able to form macroscopic synthetic biological objects with structuring on this level, manufacturing techniques have to be used in conjunction with biomolecular nanotechnology. Here, a short overview of both topics and a survey of recent advances to combine additive manufacturing with microfabrication techniques and bottom-up self-assembly involving DNA, are given.

Improved Cell-Free Transcription-Translation Reactions in Microfluidic Chemostats Augmented with Hydrogel Membranes for Continuous Small Molecule Dialysis

Increasing the protein production capacity of the PURE cell-free transcription-translation (TX-TL) system will be key to implementing complex synthetic biological circuits, and to establishing a fully self-regenerating system as a basis for the development of a synthetic cell. Under steady-state conditions, the protein synthesis capacity of the PURE system is likely at least one order of magnitude too low to express sufficient quantities of all PURE protein components. This is in part due to the fact that protein synthesis cannot be sustained during the entire dilution cycle, especially at low dilution rates. We developed a microfluidic chemostat augmented with semipermeable membranes that combines steady-state reactions and continuous dialysis as a possible solution to enhance protein synthesis at steady-state. In batch operation, the continuous dialysis of low molecular weight components via the membranes extended protein synthesis by over an order of magnitude from 2 h to over 30 h, leading to a 7-fold increase in protein yield. In chemostat operation, continuous dialysis enabled sustained protein synthesis during the entire dilution cycle even for low dilution rates, leading to 6-fold higher protein levels at steady state. The possibility to combine and independently manipulate continuous dialysis and chemostat operation renders our dialysis chemostat a promising technological basis for complex cell-free synthetic biology applications that require enhanced protein synthesis capacity.

Steady-State Operation of a Cell-Free Genetic Band-Detection Circuit

Pattern formation processes play a decisive role during embryogenesis and involve the precise spatial and temporal orchestration of intricate gene regulatory processes. Synthetic gene circuits modeled after their biological counterparts can be used to investigate such processes under well-controlled conditions and may, in the future, be utilized for autonomous position determination in synthetic biological materials. Here, we investigated a three-node feed-forward gene regulatory circuit in vitro that generates three distinct fluorescent outputs in response to varying concentrations of a single externally supplied morphogen. The circuit acts as a band detector for the morphogen concentration and, in a spatial context, could serve as a stripe-forming gene circuit. We simulated the behavior of the genetic circuit in the presence of a morphogen gradient using a system of ordinary differential equations and determined optimal parameters for stripe-pattern formation using an evolutionary algorithm. To analyze the subcircuits of the system, we conducted cell-free characterization experiments and finally tested the whole genetic circuit in nanoliter-scale microfluidic flow reactors that provided a continuous supply of cell extract and metabolites and allowed removal of degradation products. To make use of the widely employed promoters P_LlacO-1 and P_LtetO-1 in our design, we removed LacI from our bacterial cell extract by genome engineering Escherichia coli using a pORTMAGE workflow. Our results show that the band-detector works as designed when operated out of equilibrium within the flow reactors. On the other hand, subcircuits of the system and the whole circuit fail to generate the desired gene expression response when operated in a closed reactor. Our work thus underlines the importance of out-of-equilibrium operation of complex gene circuits, which cannot settle to a steady-state expression pattern within the finite lifetime of a cell-free expression system.

Phospholipid synthesis inside phospholipid membrane vesicles

Construction of living artificial cells from genes and molecules can expand our understanding of life system and establish a new aspect of bioengineering. However, growth and division of cell membrane that are basis of cell proliferation are still difficult to reconstruct because a high-yielding phospholipid synthesis system has not been established. Here, we developed a cell-free phospholipid synthesis system that combines fatty acid synthesis and cell-free gene expression system synthesizing acyltransferases. The synthesized fatty acids were sequentially converted into phosphatidic acids by the cell-free synthesized acyltransferases. Because the system can avoid the accumulation of intermediates inhibiting lipid synthesis, sub-millimolar phospholipids could be synthesized within a single reaction mixture. We also performed phospholipid synthesis inside phospholipid membrane vesicles, which encapsulated all the components, and showed the phospholipids localized onto the mother membrane. Our approach would be a platform for the construction of self-reproducing artificial cells since the membrane can grow sustainably.

Signal processing and generation of bioactive nitric oxide in a model prototissue

The design and construction of synthetic prototissues from integrated assemblies of artificial protocells is an important challenge for synthetic biology and bioengineering. Here we spatially segregate chemically communicating populations of enzyme-decorated phospholipid-enveloped polymer/DNA coacervate protocells in hydrogel modules to construct a tubular prototissue-like vessel capable of modulating the output of bioactive nitric oxide (NO). By decorating the protocells with glucose oxidase, horseradish peroxidase or catalase and arranging different modules concentrically, a glucose/hydroxyurea dual input leads to logic-gate signal processing under reaction-diffusion conditions, which results in a distinct NO output in the internal lumen of the model prototissue. The NO output is exploited to inhibit platelet activation and blood clot formation in samples of plasma and whole blood located in the internal channel of the device, thereby demonstrating proof-of-concept use of the prototissue-like vessel for anticoagulation applications. Our results highlight opportunities for the development of spatially organized synthetic prototissue modules from assemblages of artificial protocells and provide a step towards the organization of biochemical processes in integrated micro-compartmentalized media, micro-reactor technology and soft functional materials.

A challenge for synthetic biology is the design and construction of prototissue. Here, the authors spatially segregate layers of enzyme-decorated coacervate protocells as a model prototissue capable of chemical signal processing and modulating outputs of nitric oxide to inhibit blood clot formation.

Transfer RNA Synthesis-Coupled Translation and DNA Replication in a Reconstituted Transcription/Translation System

Transfer RNAs (tRNAs) are key molecules involved in translation. In vitro synthesis of tRNAs and their coupled translation are important challenges in the construction of a self-regenerative molecular system. Here, we first purified EF-Tu and ribosome components in a reconstituted translation system of Escherichia coli to remove residual tRNAs. Next, we expressed 15 types of tRNAs in the repurified translation system and performed translation of the reporter luciferase gene depending on the expression. Furthermore, we demonstrated DNA replication through expression of a tRNA encoded by DNA, mimicking information processing within the cell. Our findings highlight the feasibility of an in vitro self-reproductive system, in which tRNAs can be synthesized from replicating DNA.

Biochemistry of Aminoacyl tRNA Synthetase and tRNAs and Their Engineering for Cell-Free and Synthetic Cell Applications

Cell-free biology is increasingly utilized for engineering biological systems, incorporating novel functionality, and circumventing many of the complications associated with cells. The central dogma describes the information flow in biology consisting of transcription and translation steps to decode genetic information. Aminoacyl tRNA synthetases (AARSs) and tRNAs are key components involved in translation and thus protein synthesis. This review provides information on AARSs and tRNA biochemistry, their role in the translation process, summarizes progress in cell-free engineering of tRNAs and AARSs, and discusses prospects and challenges lying ahead in cell-free engineering.

Dissipative DNA nanotechnology

DNA nanotechnology has emerged as a powerful tool to precisely design and control molecular circuits, machines and nanostructures. A major goal in this field is to build devices with life-like properties, such as directional motion, transport, communication and adaptation. Here we provide an overview of the nascent field of dissipative DNA nanotechnology, which aims at developing life-like systems by combining programmable nucleic-acid reactions with energy-dissipating processes. We first delineate the notions, terminology and characteristic features of dissipative DNA-based systems and then we survey DNA-based circuits, devices and materials whose functions are controlled by chemical fuels. We emphasize how energy consumption enables these systems to perform work and cyclical tasks, in contrast with DNA devices that operate without dissipative processes. The ability to take advantage of chemical fuel molecules brings dissipative DNA systems closer to the active molecular devices that exist in nature.

Complex dynamics in a synchronized cell-free genetic clock

Complex dynamics such as period doubling and chaos occur in a wide variety of non-linear dynamical systems. In the context of biological circadian clocks, such phenomena have been previously found in computational models, but their experimental study in biological systems has been challenging. Here, we present experimental evidence of period doubling in a forced cell-free genetic oscillator operated in a microfluidic reactor, where the system is periodically perturbed by modulating the concentration of one of the oscillator components. When the external driving matches the intrinsic period, we experimentally find period doubling and quadrupling in the oscillator dynamics. Our results closely match the predictions of a theoretical model, which also suggests conditions under which our system would display chaotic dynamics. We show that detuning of the external and intrinsic period leads to more stable entrainment, suggesting a simple design principle for synchronized synthetic and natural genetic clocks.

In theory, driven biological oscillators can display complex dynamic behaviors, but these are experimentally difficult to observe. Here the authors, using microfluidics, show that a synthetic cell-free gene oscillator displays period doubling and even quadrupling.

Ribosomal Protein S1 Improves the Protein Yield of an In Vitro Reconstituted Cell-Free Translation System

Cell-free expression systems, such as the highly purified in vitro reconstituted PURExpress, hold great promise for engineering biological and life-similar systems by exploiting the ability to perform transcription and translation (TX-TL) outside the constraints of living cells, including for example the expression of recombinant proteins that are difficult or toxic to produce in vivo. Currently, the scope of applications utilizing purified reconstituted TX-TL systems is challenged by poor system performance resulting from limitations in the ribosome and ribosome-associated processes, leading to low protein yields. Because of the transient nature of ribosomal protein S1's interaction with the ribosome, the ribosomes in a reconstituted translation system contain varying amounts of S1, potentially impacting translation initiation and the recruitment of mRNA to the 30S ribosomal subunit. Here we report that by being supplemented with purified recombinant S1 the protein yields can be doubled when using a commercial in vitro reconstituted TX-TL system. We hypothesize that the addition of S1 increases the fraction of functional ribosomes available in the in vitro reaction. Improved yields are shown for different reporter proteins (EYFP, sfGFP, and mRFP) and in different 5'UTR contexts (strong, medium, and weak ribosome binding site), including the expression of a highly structured RNA (PSIV IRES). Overall, fine-tuning the S1 concentration provides a previously overlooked venue to increase protein yield by targeting ribosome composition and translation initiation.

Differentially Optimized Cell-Free Buffer Enables Robust Expression from Unprotected Linear DNA in Exonuclease-Deficient Extracts

The use of linear DNA templates in cell-free systems promises to accelerate the prototyping and engineering of synthetic gene circuits. A key challenge is that linear templates are rapidly degraded by exonucleases present in cell extracts. Current approaches tackle the problem by adding exonuclease inhibitors and DNA-binding proteins to protect the linear DNA, requiring additional time- and resource-intensive steps. Here, we delete the recBCD exonuclease gene cluster from the Escherichia coli BL21 genome. We show that the resulting cell-free systems, with buffers optimized specifically for linear DNA, enable near-plasmid levels of expression from σ70 promoters in linear DNA templates without employing additional protection strategies. When using linear or plasmid DNA templates at the buffer calibration step, the optimal potassium glutamate concentrations obtained when using linear DNA were consistently lower than those obtained when using plasmid DNA for the same extract. We demonstrate the robustness of the exonuclease deficient extracts across seven different batches and a wide range of experimental conditions across two different laboratories. Finally, we illustrate the use of the ΔrecBCD extracts for two applications: toehold switch characterization and enzyme screening. Our work provides a simple, efficient, and cost-effective solution for using linear DNA templates in cell-free systems and highlights the importance of specifically tailoring buffer composition for the final experimental setup. Our data also suggest that similar exonuclease deletion strategies can be applied to other species suitable for cell-free synthetic biology.

Continuous Cell-Free Replication and Evolution of Artificial Genomic DNA in a Compartmentalized Gene Expression System

In all living organisms, genomic DNA continuously replicates by the proteins encoded in itself and undergoes evolution through many generations of replication. This continuous replication coupled with gene expression and the resultant evolution are fundamental functions of living things, but they have not previously been reconstituted in cell-free systems. In this study, we combined an artificial DNA replication scheme with a reconstituted gene expression system and microcompartmentalization to realize these functions. Circular DNA replicated through rolling-circle replication followed by homologous recombination catalyzed by the proteins, phi29 DNA polymerase, and Cre recombinase expressed from the DNA. We encapsulated the system in microscale water-in-oil droplets and performed serial dilution cycles. Isolated circular DNAs at Round 30 accumulated several common mutations, and the isolated DNA clones exhibited higher replication abilities than the original DNA due to its improved ability as a replication template, increased polymerase activity, and a reduced inhibitory effect of polymerization by the recombinase. The artificial genomic DNA, which continuously replicates using self-encoded proteins and autonomously improves its sequence, provides a useful starting point for the development of more complex artificial cells.

Modularize and Unite: Toward Creating a Functional Artificial Cell

An artificial cell is a simplified model of a living system, bringing breakthroughs into both basic life science and applied research. The bottom-up strategy instructs the construction of an artificial cell from nonliving materials, which could be complicated and interdisciplinary considering the inherent complexity of living cells. Although significant progress has been achieved in the past 2 decades, the area is still facing some problems, such as poor compatibility with complex bio-systems, instability, and low standardization of the construction method. In this review, we propose creating artificial cells through the integration of different functional modules. Furthermore, we divide the function requirements of an artificial cell into four essential parts (metabolism, energy supplement, proliferation, and communication) and discuss the present researches. Then we propose that the compartment and the reestablishment of the communication system would be essential for the reasonable integration of functional modules. Although enormous challenges remain, the modular construction would facilitate the simplification and standardization of an artificial cell toward a natural living system. This function-based strategy would also broaden the application of artificial cells and represent the steps of imitating and surpassing nature.

Microfluidic droplet-based functional materials for cell manipulation

Functional materials from the microfluidic-based droplet community are emerging as enabling tools for various applications in tissue engineering and cell biology. The innovative micro- and nano-scale materials with diverse sizes, shapes and components can be fabricated without the use of complicated devices, allowing unprecedented control over the cells that interact with them. Here, we review the current development of microfluidic-based droplet techniques for creation of functional materials (i.e., liquid droplet, microcapsule, and microparticle). We also describe their various applications for manipulating cell fate and function.

In vitro reconstitution of the Escherichia coli 70S ribosome with a full set of recombinant ribosomal proteins

Many studies of the reconstitution of the Escherichia coli small ribosomal subunit from its individual molecular parts have been reported, but contrastingly, similar studies of the large ribosomal subunit have not been well performed to date. Here, we describe protocols for preparing the 33 ribosomal proteins of the E. coli 50S subunit and demonstrate successful reconstitution of a functionally active 50S particle that can perform protein synthesis in vitro. We also successfully reconstituted both ribosomal subunits (30S and 50S) and 70S ribosomes using a full set of recombinant ribosomal proteins by integrating our developed method with the previously developed fully recombinant-based integrated synthesis, assembly and translation. The approach described here makes a major contribution to the field of ribosome engineering and could be fundamental to the future studies of ribosome assembly processes.

Controlled metabolic cascades for protein synthesis in an artificial cell

In recent years, researchers have been pursuing a method to design and to construct life forms from scratch - in other words, to create artificial cells. In many studies, artificial cellular membranes have been successfully fabricated, allowing the research field to grow by leaps and bounds. Moreover, in addition to lipid bilayer membranes, proteins are essential factors required to construct any cellular metabolic reaction; for that reason, different cell-free expression systems under various conditions to achieve the goal of controlling the synthetic cascades of proteins in a confined area have been reported. Thus, in this review, we will discuss recent issues and strategies, enabling to control protein synthesis cascades that are being used, particularly in research on artificial cells.

Connecting primitive phase separation to biotechnology, synthetic biology, and engineering

One aspect of the study of the origins of life focuses on how primitive chemistries assembled into the first cells on Earth and how these primitive cells evolved into modern cells. Membraneless droplets generated from liquid-liquid phase separation (LLPS) are one potential primitive cell-like compartment; current research in origins of life includes study of the structure, function, and evolution of such systems. However, the goal of primitive LLPS research is not simply curiosity or striving to understand one of life's biggest unanswered questions, but also the possibility to discover functions or structures useful for application in the modern day. Many applicational fields, including biotechnology, synthetic biology, and engineering, utilize similar phaseseparated structures to accomplish specific functions afforded by LLPS. Here, we briefly review LLPS applied to primitive compartment research and then present some examples of LLPS applied to biomolecule purification, drug delivery, artificial cell construction, waste and pollution management, and flavor encapsulation. Due to a significant focus on similar functions and structures, there appears to be much for origins of life researchers to learn from those working on LLPS in applicational fields, and vice versa, and we hope that such researchers can start meaningful cross-disciplinary collaborations in the future.