Controlling nanochannel orientation and dimensions in graphene-based nanofluidic membranes

Fine-Tuning 2D Heterogeneous Channels for Charge-Lock Enhanced Lithium Separation from Brine

The extraction of lithium (Li) from complex brines presents significant challenges due to the interference of competing ions, particularly magnesium (Mg2⁺), which complicates the selective separation process. Herein, a strategy is introduced employing charge-lock enhanced 2D heterogeneous channels for the rapid and selective uptake of Li⁺. This approach integrates porous ZnFe2O4/ZnO nanosheets into Ag+-modulated sub-nanometer interlayer channels, forming channels optimized for Li⁺ extraction. The novelty lies in the charge-lock mechanism, which selectively captures Mg2⁺ ions, thereby facilitating the effective separation of Li from Mg. This mechanism is driven by a charge transfer during the formation of ZnFe2O4/ZnO, rendering O atoms in Fe-O bonds more negatively charged. These negative charges strongly interact with the high charge density of Mg2⁺ ions, enabling the charge-locking mechanism and the targeted capture of Mg2⁺. Optimization with Ag⁺ further improves interlayer spacing, increasing ion transport rates and addressing the swelling issue typical of 2D membranes. The resultant membrane showcases high water flux (44.37 L m⁻2 h⁻¹ bar⁻¹) and an impressive 99.8% rejection of Mg2⁺ in real brine conditions, achieving a Li⁺/Mg2⁺ selectivity of 59.3, surpassing existing brine separation membranes. Additionally, this membrane demonstrates superior cyclic stability, highlighting its high potential for industrial applications.

From Sheep Track to Motorway: Supramolecular-Mediated 2D Nanofluidic Channels for Ultrafast Water Transport

Atomic thick 2D materials hold great potential as building blocks to construct highly permeable membranes, yet the permeability of laminar 2D material membranes is still limited by their irregularity sheep track-like interlayer channels. Herein, a supramolecular-mediated strategy to induce the regular assembly of high-throughput 2D nanofluidic channels based on host-guest interactions is proposed. Inspired by the characteristics of motorways, supramolecular-mediated ultrathin 2D membranes with broad and continuous regular water transport channels are successfully constructed using graphene oxide (GO) as an example. The prepared membrane achieves an ultrahigh water permeability (369.94 LMH bar-1) more than six times higher than that of the original membranes while maintaining dye rejection above 98.5%, which outperforms the reported 2D membranes. Characterization and simulation results show that the introduction of hyaluronate-grafted β-cyclodextrin not only expands the interlayer channels of GO membranes but also enables the membranes to operate stably under harsh conditions with the help of host-guest interactions. This universal supramolecular assembly strategy provides new opportunities for the preparation of 2D membranes with high separation performance and reliable and stable nanofluidic channels.

Fabrication of Oriented Polycrystalline MOF Superstructures

The field of metal-organic frameworks (MOFs) has progressed beyond the design and exploration of powdery and single-crystalline materials. A current challenge is the fabrication of organized superstructures that can harness the directional properties of the individual constituent MOF crystals. To date, the progress in the fabrication methods of polycrystalline MOF superstructures has led to close-packed structures with defined crystalline orientation. By controlling the crystalline orientation, the MOF pore channels of the constituent crystals can be aligned along specific directions: these systems possess anisotropic properties including enhanced diffusion along specific directions, preferential orientation of guest species, and protection of functional guests. In this perspective, we discuss the current status of MOF research in the fabrication of oriented polycrystalline superstructures focusing on the specific crystalline directions of orientation. Three methods are examined in detail: the assembly from colloidal MOF solutions, the use of external fields for the alignment of MOF particles, and the heteroepitaxial ceramic-to-MOF growth. This perspective aims at promoting the progress of this field of research and inspiring the development of new protocols for the preparation of MOF systems with oriented pore channels, to enable advanced MOF-based devices with anisotropic properties.

Two-Dimensional Sodium Channels with High Selectivity and Conductivity for Osmotic Power Generation from Wastewater

Conducting target ions rapidly while rejecting rival ions efficiently is challenging yet highly demanded for ion separation related applications. Two-dimensional (2D) channels are widely used for ion separation, but highly selective 2D channels generally suffer from a relatively low ionic conductivity. Here we report that the 2D vermiculite channels have a Na+ conductivity higher than bulk and at the same time reject heavy metal ions with a selectivity of a few hundreds. Such performance is attributed to the highly electronegative crystal surface and the extremely narrow channel (0.2 nm high), as also supported by the ab initio molecular dynamics simulation. We demonstrate that the highly selective and conductive sodium channels can be utilized to harvest osmotic power from industrial wastewater, achieving a power density of more than 20 W m-2 while preventing pollution from waste heavy metal ions. This work provides a strategy for wastewater utilization as well as treatment. Moreover, the investigation suggests the possibility to break the ionic permeability-selectivity trade-off by combining Ångstrom-scale confinement with proper surface engineering, which could lead to applications that are challenging for previous materials.

Permselectivity and Ionic Conductivity Study of Na+ and Br- Ions in Graphene Oxide-Based Membranes for Redox Flow Batteries

Permselectivity of a membrane is central for the development of electrochemical energy storage devices with two redox couples, such as redox flow batteries (RFBs). In RFBs, Br3-/Br- couple is often used as a catholyte which can cross over to the anolyte, limiting the battery's lifetime. Naturally, the development of permselective membranes is essential to the success of RFBs since state-of-the-art perfluorosulfonic acid (PFSA) is too costly. This study investigates membranes of graphene oxide (GO), polyvinylpyrrolidone (PVP), and imidazole (Im) as binder and linker, respectively. The GO membranes are compared to a standard PFSA membrane in terms of ionic conductivity (Na+) and permselectivity (exclusion of Br-). The ionic conduction is evaluated from electrochemical impedance spectroscopy and the permselectivity from two-compartment diffusion cells in a four-electrode system. Our findings suggest that the GO membranes reach conductivity and permselectivity comparable with standard PFSA membranes.

Thickness Mapping and Layer Number Identification of Exfoliated van der Waals Materials by Fourier Imaging Micro-Ellipsometry

As performance of van der Waals heterostructure devices is governed by the nanoscale thicknesses and homogeneity of their constituent mono- to few-layer flakes, accurate mapping of these properties with high lateral resolution becomes imperative. Spectroscopic ellipsometry is a promising optical technique for such atomically thin-film characterization due to its simplicity, noninvasive nature and high accuracy. However, the effective use of standard ellipsometry methods on exfoliated micron-scale flakes is inhibited by their tens-of-microns lateral resolution or slow data acquisition. In this work, we demonstrate a Fourier imaging spectroscopic micro-ellipsometry method with sub-5 μm lateral resolution and three orders-of-magnitude faster data acquisition than similar-resolution ellipsometers. Simultaneous recording of spectroscopic ellipsometry information at multiple angles results in a highly sensitive system, which is used for performing angstrom-level accurate and consistent thickness mapping on exfoliated mono-, bi- and trilayers of graphene, hexagonal boron nitride (hBN) and transition metal dichalcogenide (MoS₂, WS₂, MoSe₂, WSe₂) flakes. The system can successfully identify highly transparent monolayer hBN, a challenging proposition for other characterization tools. The optical microscope integrated ellipsometer can also map minute thickness variations over a micron-scale flake, revealing its lateral inhomogeneity. The prospect of adding standard optical elements to augment generic optical imaging and spectroscopy setups with accurate in situ ellipsometric mapping capability presents potential opportunities for investigation of exfoliated 2D materials.

Does twist angle affect the properties of water confined inside twisted bilayer graphene?

Graphene nanoslit pores are used for nanofluidic devices, such as, in water desalination, ion-selective channels, ionic transistors, sensing, molecular sieving, blue energy harvesting, and protein sequencing. It is a strenuous task to prepare nanofluidic devices, because a small misalignment leads to a significant alteration in various properties of the devices. Here, we focus on the rotational misalignment between two parallel graphene sheets. Using molecular dynamics simulation, we probe the structure and dynamics of monolayer water confined inside graphene nanochannels for a range of commensurate twist angles. With SPC/E and TIP4P/2005 water models, our simulations reveal the independence of the equilibrium number density- n ∼ 13 nm^-2 for SPC/E and n ∼ 11.5 nm^-2 for TIP4P/2005- across twists. Based on the respective densities of the water models, the structure and dielectric constant are invariant of twist angles. The confined water structure at this density shows square ice ordering for SPC/E water only. TIP4P/2005 shows ordering at the vicinity of a critical density (n ∼ 12.5 nm^-2). The average perpendicular dielectric constant of the confined water remains anomalously low (∼2 for SPC/E and ∼6 for TIP4P/2005) for the studied twist angles. We find that the friction coefficient of confined water molecules varies for small twist angles, while becoming independent for twists greater than 5.1°. Our results indicate that a small, angular misalignment will not impair the dielectric properties of monolayer water within a graphene slit-pore, but can significantly influence its dynamics.

Two-Dimensional Nanofluidic Membranes with Intercalated In-Plane Shortcuts for High-Performance Blue Energy Harvesting

Two-dimensional nanofluidic membranes offer great opportunities for developing efficient and robust devices for ionic/water-nexus energy harvesting. However, low counterion concentration and long pathway through limited ionic flux restrict their output performance. Herein, it is demonstrated that rapid diffusion kinetics can be realized in two-dimensional nanofluidic membranes by introducing in-plane holes across nanosheets, which not only increase counterion concentration but also shorten pathway length through the membranes. Thus, the holey membranes exhibited an enhanced performance relative to the pristine ones in terms of osmotic energy conversion. In particular, a biomimetic multilayered membrane sequentially assembled from pristine and holey sections offers an optimized combination of selectivity and permeability, therefore generating a power density up to 6.78 W m^-2 by mixing seawater and river water, superior to the majority of the state-of-the-art lamellar nanofluidic membranes. This work highlights the importance of channel morphologies and presents a general strategy for effectively improving ion transport through lamellar membranes for high-performance nanofluidic devices.

Engineering Polymeric Nanofluidic Membranes for Efficient Ionic Transport: Biomimetic Design, Material Construction, and Advanced Functionalities

Design elements extracted from biological ion channels guide the engineering of artificial nanofluidic membranes for efficient ionic transport and spawn biomimetic devices with great potential in many cutting-edge areas. In this context, polymeric nanofluidic membranes can be especially attractive because of their inherent flexibility and benign processability, which facilitate massive fabrication and facile device integration for large-scale applications. Herein, the state-of-the-art achievements of polymeric nanofluidic membranes are systematically summarized. Theoretical fundamentals underlying both biological and synthetic ion channels are introduced. The advances of engineering polymeric nanofluidic membranes are then detailed from aspects of structural design, material construction, and chemical functionalization, emphasizing their broad chemical and reticular/topological variety as well as considerable property tunability. After that, this Review expands on examples of evolving these polymeric membranes into macroscopic devices and their potentials in addressing compelling issues in energy conversion and storage systems where efficient ion transport is highly desirable. Finally, a brief outlook on possible future developments in this field is provided.

Abalone-Inspired Adhesive and Photo-Responsive Microparticle Delivery Systems for Periodontal Drug Therapy

Antibiotics provide promising strategies for treating periodontitis, while their delivery and controllable release with desired oral retention remain challenging. Here, inspired by the unique suction-cup structures of abalones, a novel adhesive and photo-responsive microparticle (MP) delivery system is developed to treat periodontitis through microfluidic electrospray technology. Such MPs are generated by quickly ionic cross-linking of sodium alginate together with photo-curing of poly(ethylene glycol) diacrylate of the distorted microfluidic droplets during their high-speed dropping into calcium chloride solution. Attributing to their unique concave structures, the abalone-inspired MPs exhibit desired underwater adhesion ability and stability under running water. In addition, due to the loading of antibiotics minocycline hydrochloride and near-infrared (NIR)-responsive black phosphorus during their fabrication, the resultant MPs can not only eradicate bacteria directly, but also realize a controllable and effective drug release upon NIR irradiation. Based on these features, it is demonstrated from in vivo periodontitis that the abalone-inspired MPs are firmly adhesive and can controlled-release drugs on the tooth, and thus have outstanding antibacterial efficacy against Porphyromonas gingivalis. These results indicate the particular values of the abalone-inspired MPs for oral-related disease treatment.

Recent Advances on Membranes for Water Purification Based on Carbon Nanomaterials

Every year the problem of water purification becomes more relevant. This is due to the continuous increase in the level of pollution of natural water sources, an increase in the population, and sharp climatic changes. The growth in demand for affordable and clean water is not always comparable to the supply that exists in the water treatment market. In addition, the amount of water pollution increases with the increase in production capacity, the purification of which cannot be fully handled by conventional processes. However, the application of novel nanomaterials will enhance the characteristics of water treatment processes which are one of the most important technological problems. In this review, we considered the application of carbon nanomaterials in membrane water purification. Carbon nanofibers, carbon nanotubes, graphite, graphene oxide, and activated carbon were analyzed as promising materials for membranes. The problems associated with the application of carbon nanomaterials in membrane processes and ways to solve them were discussed. Their efficiency, properties, and characteristics as a modifier for membranes were analyzed. The potential directions, opportunities and challenges for application of various carbon nanomaterials were suggested.

A two-dimensional superlattice membrane enables high-performance desalination and enhanced Li ion selectivity

Here, we report a two-dimension (2D) superlattice-like membrane composed of periodic MoS₂ and GO nanosheets, which delivers enhanced salt rejection capability, high water flux, and Li ion selectivity. It opens a new perspective in assembling 2D membranes and can be utilized as a green and low-cost approach for desalination.

2D materials: increscent quantum flatland with immense potential for applications

Quantum flatland i.e., the family of two dimensional (2D) quantum materials has become increscent and has already encompassed elemental atomic sheets (Xenes), 2D transition metal dichalcogenides (TMDCs), 2D metal nitrides/carbides/carbonitrides (MXenes), 2D metal oxides, 2D metal phosphides, 2D metal halides, 2D mixed oxides, etc. and still new members are being explored. Owing to the occurrence of various structural phases of each 2D material and each exhibiting a unique electronic structure; bestows distinct physical and chemical properties. In the early years, world record electronic mobility and fractional quantum Hall effect of graphene attracted attention. Thanks to excellent electronic mobility, and extreme sensitivity of their electronic structures towards the adjacent environment, 2D materials have been employed as various ultrafast precision sensors such as gas/fire/light/strain sensors and in trace-level molecular detectors and disease diagnosis. 2D materials, their doped versions, and their hetero layers and hybrids have been successfully employed in electronic/photonic/optoelectronic/spintronic and straintronic chips. In recent times, quantum behavior such as the existence of a superconducting phase in moiré hetero layers, the feasibility of hyperbolic photonic metamaterials, mechanical metamaterials with negative Poisson ratio, and potential usage in second/third harmonic generation and electromagnetic shields, etc. have raised the expectations further. High surface area, excellent young's moduli, and anchoring/coupling capability bolster hopes for their usage as nanofillers in polymers, glass, and soft metals. Even though lab-scale demonstrations have been showcased, large-scale applications such as solar cells, LEDs, flat panel displays, hybrid energy storage, catalysis (including water splitting and CO2 reduction), etc. will catch up. While new members of the flatland family will be invented, new methods of large-scale synthesis of defect-free crystals will be explored and novel applications will emerge, it is expected. Achieving a high level of in-plane doping in 2D materials without adding defects is a challenge to work on. Development of understanding of inter-layer coupling and its effects on electron injection/excited state electron transfer at the 2D-2D interfaces will lead to future generation heterolayer devices and sensors.

Atomistic Simulations of the Permeability and Dynamic Transportation Characteristics of Diamond Nanochannels

Through atomistic simulations, this work investigated the permeability of hexagonal diamond nanochannels for NaCl solution. Compared with the multilayer graphene nanochannel (with a nominal channel height of 6.8 Å), the diamond nanochannel exhibited better permeability. The whole transportation process can be divided into three stages: the diffusion stage, the transition stage and the flow stage. Increasing the channel height reduced the transition nominal pressure that distinguishes the diffusion and flow stages, and improved water permeability (with increased water flux but reduced ion retention rate). In comparison, channel length and solution concentration exerted ignorable influence on water permeability of the channel. Further simulations revealed that temperature between 300 and 350 K remarkably increased water permeability, accompanied by continuously decreasing transition nominal pressure. Additional investigations showed that the permeability of the nanochannel could be effectively tailored by surface functionalization. This work provides a comprehensive atomic insight into the transportation process of NaCl solution in a diamond nanochannel, and the established understanding could be beneficial for the design of advanced nanofluidic devices.

Fabrication of graphene-based porous materials: traditional and emerging approaches

The anisotropic nature of ‘graphenic’ nanosheets enables them to form stable three-dimensional porous materials. The use of these porous structures has been explored in several applications including electronics and batteries, environmental remediation, energy storage, sensors, catalysis, tissue engineering, and many more. As method of fabrication greatly influences the final pore architecture, and chemical and mechanical characteristics and performance of these porous materials, it is essential to identify and address the correlation between property and function. In this review, we report detailed analyses of the different methods of fabricating porous graphene-based structures – with a focus on graphene oxide as the base material – and relate these with the resultant morphologies, mechanical responses, and common applications of use. We discuss the feasibility of the synthesis approaches and relate the GO concentrations used in each methodology against their corresponding pore sizes to identify the areas not explored to date.

Due to their anisotropic nature, graphene nanosheets can be used to form 3-dimensional porous materials using template-free and template-directed methodologies. These fabrication strategies are found to influence the properties of the final structure.

Nanofabrication route to achieve sustainable production of next generation defect-free graphene: analysis and characterisation

In the past two decades, graphene has been one of the most studied materials due to its exceptional properties. The scalable route to cost-effective manufacture defect-free graphene has continued to remain a technical challenge. Intrinsically defect-free graphene changes its properties dramatically, and it is a challenging task to control the defects in graphene production using scaled-down subtractive manufacturing techniques. In this work, the exfoliation of graphite was investigated as a sustainable low-cost graphene manufacturing technique. The study made use of a simple domestic appliance e.g., a kitchen blender to churn graphene in wet conditions by mixing with N-Methyl-2-pyrrolidone (NMP). It was found that the centrifugal force-induced turbulent flow caused by the rotating blades exfoliates graphite flakes to form graphene. The technique is endowed with a high yield of defect-free graphene (0.3 g/h) and was deemed suitable to remove 10% fluoride content from the water and color absorption from fizzy drinks.

Controlled Release of Molecular Intercalants from Two-Dimensional Nanosheet Films

Solution co-deposition of two-dimensional (2D) nanosheets with chemical solutes yields nanosheet-molecular heterostructures. A feature of these macroscopic layered hybrids is their ability to release the intercalated molecular agent to express chemical functionality on their surfaces or in their near surroundings. Systematic design methods are needed to control this molecular release to match the demand for rate and lifetime in specific applications. We hypothesize that release kinetics are controlled by transport processes within the layered solids, which primarily involve confined molecular diffusion through nanochannels formed by intersheet van der Waals gaps. Here a variety of graphene oxide (GO)/molecular hybrids are fabricated and subject to transient experiments to characterize release kinetics, locations, and mechanisms. The measured release rate profiles can be successfully described by a numerical model of internal transport processes, and the results used to extract effective Z-directional diffusion coefficients for various film types. The diffusion coefficients are found to be 8 orders of magnitude lower than those in free solution due to nanochannel confinement and serpentine path effects, and this retardation underlies the ability of 2D materials to control and extend release over useful time scales. In-plane texturing of the heterostructured films by compressive wrinkling or crumpling is shown to be a useful design tool to control the release rate for a given film type and molecular intercalant. The potential of this approach is demonstrated through case studies on the controlled release of chemical virucidal agents.

A graphene-based hydrogel monolith with tailored surface chemistry for PFAS passive sampling

Aquatic contamination by per- and polyfluorinated alkyl substances (PFAS) has attracted global attention due to their environmental and health concerns. Current health advisories and surface water regulatory limits require PFAS detection in the parts per trillion (ppt) range. One way to achieve those low detection limits is to use a reliable passive sampling-based monitoring tool for PFAS, as exists for numerous nonpolar persistent organic pollutants. Here we introduce a new graphene-based hydrogel monolith and describe its synthesis, chemical functionalization, property characterization, and testing as a PFAS equilibrium passive sampler. The graphene monoliths were self-assembled by hydrothermal treatment from graphene oxide (GO) aqueous dispersions to produce free standing cylinders of ~563 mm³ volume consisting of ~4 wt-% thin-walled porous graphene and ~96 wt-% water. The uptake of 23 PFAS was measured on the as-produced monoliths, and equilibrium partition coefficients (K_SW), were derived for longer chain (C≥8) perfluoroalkyl acids (PFAA) and neutral precursors such as sulfonamides (log K_SW range 1.9 - 3.6). To increase the K_SW for shorter chain PFAA, the monoliths were chemically modified by a new diazonium-based grafting reaction that introduces positive surface charge without damage to the graphenic backbone. Introduction of benzylamine moieties through the diazonium intermediate switches zeta potential at pH 7 from -45mV (as-produced graphene) to + 5mV. This modification increased the sorption of short and middle chain PFAA by ten-fold (e.g. log K_SW for PFBA increased from 1.3 to 2.2), thereby improving the functionality of the passive sampler device for a wider range of PFAS. Field deployments demonstrated that the graphene monoliths were capable of detecting key PFAS in the Delaware River.

Metal-organic framework-based micropipette is a metal ion responsive nanochannel after adsorbing H2S

Glass micropipettes are easy to fabricate, have excellent flexibility and stable properties. HKUST-1 and MIL-68(In) are in situ grown in the tip of a micropipette to construct porous nanochannels. After absorbing H2S, the MIL-68(In)-based nanochannel shows effective metal ion responsiveness for Hg2+-detection.

Morphology and Chemical Purity of Water Suspension of Graphene Oxide FLAKES Aged for 14 Months in Ambient Conditions. A Preliminary Study

Graphene and its derivatives have attracted scientists’ interest due to their exceptional properties, making them alluring candidates for multiple applications. However, still little is known about the properties of as-obtained graphene derivatives during long-term storage. The aim of this study was to check whether or not 14 months of storage time impacts graphene oxide flakes’ suspension purity. Complementary micro and nanoscale characterization techniques (SEM, AFM, EDS, FTIR, Raman spectroscopy, and elemental combustion analysis) were implemented for a detailed description of the topography and chemical properties of graphene oxide flakes. The final step was pH evaluation of as-obtained and aged samples. Our findings show that purified flakes sustained their purity over 14 months of storage.