An antibonding valence band maximum enables defect-tolerant and stable GeSe photovoltaics

Single Crystalline GeSe Van Der Waals Ribbons With Uniform Layer Stacking, High Carrier Mobility, and Adjustable Edge Morphology

Performance of the group IV monochalcogenide GeSe in solar cells, electronic, and optoelectronic devices is expected to improve when high-quality single crystalline material is used rather than polycrystalline films. Crystalline flakes represent an attractive alternative to bulk single crystals as their synthesis may be developed to be scalable, faster, and with higher overall yield. However, large - and especially large and thin - single crystal flakes are notoriously hard to synthesize. Here it is demonstrated that vapor-liquid-solid growth combined with direct lateral vapor-solid incorporation produces high-quality single crystalline GeSe ribbons with tens of micrometers size and controllable thickness. Electron microscopy shows that the ribbons exhibit perfect equilibrium (AB) van der Waals stacking order without extended defects across the entire thickness, in contrast to the conventional case of substrate-supported flakes where material is added via layer-by-layer nucleation and growth on the basal plane. Electrical measurements show anisotropic transport and a high Hall mobility of 85 cm2 V-1 s-1, on par with the best single crystals to date. Growth from mixed GeSe and SnSe vapors, finally, yields ribbons with unchanged structure and composition but with jagged edges, promising for applications that rely on ample chemically active edge sites, such as catalysis or photocatalysis.

2D Free-Standing GeS1-xSex with Composition-Tunable Bandgap for Tailored Polarimetric Optoelectronics

Germanium-based monochalcogenides (i.e., GeS and GeSe) with desirable properties are promising candidates for the development of next-generation optoelectronic devices. However, they are still stuck with challenges, such as relatively fixed electronic band structure, unconfigurable optoelectronic characteristics, and difficulty in achieving free-standing growth. Herein, it is demonstrated that two-dimensional (2D) free-standing GeS1-xSex (0 ≤ x ≤ 1) nanoplates can be grown by low-pressure rapid physical vapor deposition (LPRPVD), fulfilling a continuously composition-tunable optical bandgap and electronic band structure. By leveraging the synergistic effect of composition-dependent modulation and free-standing growth, GeS1-xSex-based optoelectronic devices exhibit significantly configurable hole mobility from 6.22 × 10-4 to 1.24 cm2V-1s⁻1 and tunable responsivity from 8.6 to 311 A W-1 (635 nm), as x varies from 0 to 1. Furthermore, the polarimetric sensitivity can be tailored from 4.3 (GeS0.29Se0.71) to 1.8 (GeSe) benefiting from alloy engineering. Finally, the tailored imaging capability is also demonstrated to show the application potential of GeS1-xSex alloy nanoplates. This work broadens the functionality of conventional binary materials and motivates the development of tailored polarimetric optoelectronic devices.

Structure of Amorphous Selenium: Small Ring, Big Controversy

Selenium (Se) discovered in 1817 belongs to the family of chalcogens. Surprisingly, despite the long history of over two centuries and the chemical simplicity of Se, the structure of amorphous Se (a-Se) remains controversial to date regarding the dominance of chains versus rings. Here, we find that vapor-deposited a-Se is composed of disordered rings rather than chains in melt-quenched a-Se. We further reveal that the main origin of this controversy is the facile transition of rings to chains arising from the inherent instability of rings. This transition can be inadvertently triggered by certain characterization techniques themselves containing above-bandgap illumination (above 2.1 eV) or heating (above 50 °C). We finally build a roadmap for obtaining accurate Raman spectra by using above-bandgap excitation lasers with low photon flux (below 1017 phs m-2 s-1) and below-bandgap excitation lasers measured at low temperatures (below -40 °C) to minimize the photoexcitation- and heat-induced ring-to-chain transitions.

Characterizing Spatial and Energetic Distributions of Trap States Toward Highly Efficient Perovskite Photovoltaics

Due to their greater opt electric performance, perovskite photovoltaics (PVs) present huge potential to be commercialized. Perovskite PV's high theoretical efficiency expands the available development area. The passivation of defects in perovskite films is crucial for approaching the theoretical limit. In addition to creating efficient passivation techniques, it is essential to direct the passivation approach by getting precise and real-time information on the trap states through measurements. Therefore, it is necessary to establish quantitative characterization methods for the trap states in energy and 3D spaces. The authors cover the characterization of the spatial and energy distributions of trap states in this article with an eye toward high-efficiency perovskite photovoltaics. After going over the strategies that have been created for characterizing and evaluating trap states, the authors will concentrate on how to direct the creative development of characterization techniques for trap states assessment and highlight the opportunities and challenges of future development. The 3D space and energy distribution mappings of trap states are anticipated to be realized. The review will give key guiding importance for further approaching the theoretical efficiency of perovskite photovoltaics, offering some future research direction and technological assistance for the development of appropriate targeted passivation technologies.

Engineering electronic structures and optical properties of a MoSi2N4 monolayer via modulating surface hydrogen chemisorption

Recently, a MoSi2N4 monolayer has been successfully synthesized by a delicately designed chemical vapor deposition (CVD) method. It exhibits promising (opto)electronic properties due to a relatively narrow bandgap (∼1.94 eV), high electron/hole mobility, and excellent thermal/chemical stability. Currently, much effort is being devoted to further improving its properties through engineering defects or constructing nanocomposites (e.g., van der Waals heterostructures). Herein, we report a theoretical investigation on hydrogenation as an alternative surface functionalization approach to effectively manipulate its electronic structures and optical properties. The calculation results suggested that chemisorption of H atoms on the top of N atoms on MoSi2N4 was energetically most favored. Upon H chemisorption, the band gap values gradually decreased from 1.89 eV (for intrinsic MoSi2N4) to 0 eV (for MoSi2N4-16H) and 0.25 eV (for MoSi2N4-32H), respectively. The results of optical properties studies revealed that a noticeable enhancement in light absorption intensity could be realized in the visible light range after the surface hydrogenation process. Specifically, full-hydrogenated MoSi2N4 (MoSi2N4-32H) manifested a higher absorption coefficient than that of semi-hydrogenated MoSi2N4 (MoSi2N4-16H) in the visible light range. This work can provide theoretical guidance for rational engineering of optical and optoelectronic properties of MoSi2N4 monolayer materials via surface hydrogenation towards emerging applications in electronics, optoelectronics, photocatalysis, etc.

Synergy of 3D and 2D Perovskites for Durable, Efficient Solar Cells and Beyond

Three-dimensional (3D) organic-inorganic lead halide perovskites have emerged in the past few years as a promising material for low-cost, high-efficiency optoelectronic devices. Spurred by this recent interest, several subclasses of halide perovskites such as two-dimensional (2D) halide perovskites have begun to play a significant role in advancing the fundamental understanding of the structural, chemical, and physical properties of halide perovskites, which are technologically relevant. While the chemistry of these 2D materials is similar to that of the 3D halide perovskites, their layered structure with a hybrid organic-inorganic interface induces new emergent properties that can significantly or sometimes subtly be important. Synergistic properties can be realized in systems that combine different materials exhibiting different dimensionalities by exploiting their intrinsic compatibility. In many cases, the weaknesses of each material can be alleviated in heteroarchitectures. For example, 3D-2D halide perovskites can demonstrate novel behavior that neither material would be capable of separately. This review describes how the structural differences between 3D halide perovskites and 2D halide perovskites give rise to their disparate materials properties, discusses strategies for realizing mixed-dimensional systems of various architectures through solution-processing techniques, and presents a comprehensive outlook for the use of 3D-2D systems in solar cells. Finally, we investigate applications of 3D-2D systems beyond photovoltaics and offer our perspective on mixed-dimensional perovskite systems as semiconductor materials with unrivaled tunability, efficiency, and technologically relevant durability.

Abnormal behavior of preferred formation of the cationic vacancies from the interior in a γ-GeSe monolayer with the stereo-chemical antibonding lone-pair state

Two-dimensional (2D) materials tend to have the preferable formation of vacancies at the outer surface. Here, contrary to the normal notion, we reveal a type of vacancy that thermodynamically initiates from the interior part of the 2D backbone of germanium selenide (γ-GeSe). Interestingly, the Ge-vacancy (V_Ge) in the interior part of γ-GeSe possesses the lowest formation energy amongst the various types of defects considered. We also find a low diffusion barrier (1.04 eV) of V_Ge, which is half of those of sulfur vacancies in MoS₂. The facile formation of mobile V_Ge is rooted in the antibonding coupling of the lone-pair Ge 4s and Se 4p states near the valence band maximum, which also exists in other gamma-phase MX (M = Sn, Ge; X = S, Te). The V_Ge is accompanied by a shallow acceptor level in the band gap and induces strong infrared light absorption and p-type conductivity. The V_Ge located in the middle cationic Ge sublattice is well protected by the surface Se layers - a feature that is absent in other atomically thin materials. Our work suggests that the unique well-buried inner V_Ge, with the potential of forming structurally protected ultrathin conducting filaments, may render the GeSe layer an ideal platform for quantum emitting, memristive, and neuromorphic applications.

Indoor photovoltaics awaken the world's first solar cells

Selenium (Se) solar cells were the world's first solid-state photovoltaics reported in 1883, opening the modern photovoltaics. However, its wide bandgap (~1.9 eV) limits sunlight harvesting. Here, we revisit the world's oldest but long-ignored photovoltaic material with the emergence of indoor photovoltaics (IPVs); the absorption spectrum of Se perfectly matches the emission spectra of commonly used indoor light sources in the 400 to 700 nm range. We find that the widely used Te adhesion layer also passivates defects at the nonbonded Se/TiO₂ interface. By optimizing the Te coverage from 6.9 to 70.4%, the resulting Se cells exhibit an efficiency of 15.1% under 1000 lux indoor illumination and show no efficiency loss after 1000 hours of continuous indoor illumination without encapsulation, outperforming the present IPV industry standard of amorphous silicon cells in both efficiency and stability. We further fabricate Se modules (6.75 cm²) that produce 232.6 μW output power under indoor illumination, powering a radio-frequency identification-based localization tag.

Spiers Memorial Lecture: Next generation chalcogenide-based absorbers for thin-film solar cells

Inorganic-based thin-film photovoltaics (TFPV) represents an important component of the growing low-carbon energy market and plays a vital role in the drive toward lower cost and increased penetration of solar energy. Yet, commercialized thin-film absorber technologies suffer from some non-ideal characteristics, such as toxic or non-abundant element use (e.g., CdTe and Cu(In,Ga)(S,Se)₂, which bring into question their suitability for terawatt deployment. Numerous promising chalcogenide, halide, pnictide and oxide semiconductors are being pursued to bridge these concerns for TFPV and several promising paths have emerged, both as prospective replacements for the entrenched technologies, and to serve as partner (i.e., higher bandgap) absorbers for tandem junction devices-e.g., to be used with a lower bandgap Si bottom cell. The current perspective will primarily focus on emerging chalcogenide-based technologies and provide both an overview of absorber candidates that have been of recent interest and a deeper dive into an exemplary Cu₂BaSnS₄-related family. Overall, considering the combined needs of high-performance, low-cost, and operational stability, as well as the experiences gained from existing commercialized thin-film absorber technologies, chalcogenide-based semiconductors represent a promising direction for future PV development and also serve to highlight common themes and needs among the broader TFPV materials family.

Solution-processed Ge(ii)-based chalcogenide thin films with tunable bandgaps for photovoltaics

Solution processes have been widely used to construct chalcogenide-based thin-film optoelectronic and electronic devices that combine high performance with low-cost manufacturing. However, Ge(ii)-based chalcogenide thin films possessing great potential for optoelectronic devices have not been reported using solution-based processes; this is mainly attributed to the easy oxidation of intermediate Ge(ii) to Ge(iv) in the precursor solution. Here we report solution-processed deposition of Ge(ii)-based chalcogenide thin films in the case of GeSe and GeS films by introducing hypophosphorous acid as a suitable reducing agent and strong acid. This enables the generation of Ge(ii) from low-cost and stable GeO2 powders while suppressing the oxidation of Ge(ii) to Ge(iv) in the precursor solution. We further show that such solution processes can also be used to deposit GeSe1-x S x alloy films with continuously tunable bandgaps ranging from 1.71 eV (GeS) to 1.14 eV (GeSe) by adjusting the atomic ratio of S- to Se-precursors in solution, thus allowing the realization of optimal-bandgap single-junction photovoltaic devices and multi-junction devices.

Free-standing large, ultrathin germanium selenide van der Waals ribbons by combined vapor-liquid-solid growth and edge attachment

Among group IV monochalcogenides, layered GeSe is of interest for its anisotropic properties, 1.3 eV direct band gap, ferroelectricity, high mobility, and excellent environmental stability. Electronic, optoelectronic and photovoltaic applications depend on the development of synthesis approaches that yield large quantities of crystalline flakes with controllable size and thickness. Here, we demonstrate the growth of single-crystalline GeSe nanoribbons by a vapor-liquid-solid process over Au catalyst on different substrates at low thermal budget. The nanoribbons crystallize in a layered structure, with ribbon axis along the armchair direction of the van der Waals layers. The ribbon morphology is determined by catalyst driven fast longitudinal growth accompanied by lateral expansion via edge-specific incorporation into the basal planes. This combined growth mechanism enables temperature controlled realization of ribbons with typical widths of up to 30 μm and lengths exceeding 100 μm, while maintaining sub-50 nm thickness. Nanoscale cathodoluminescence spectroscopy on individual GeSe nanoribbons demonstrates intense temperature-dependent band-edge emission up to room temperature, with fundamental bandgap and temperature coefficient of E_g(0) = 1.29 eV and α = 3.0 × 10^-4 eV K^-1, respectively, confirming high quality GeSe with low concentration of non-radiative recombination centers promising for optoelectronic applications including light emitters, photodetectors, and solar cells.

Electric-Field-Induced Room-Temperature Antiferroelectric-Ferroelectric Phase Transition in van der Waals Layered GeSe

Searching van der Waals ferroic materials that can work under ambient conditions is of critical importance for developing ferroic devices at the two-dimensional limit. Here we report the experimental discovery of electric-field-induced reversible antiferroelectric (AFE) to ferroelectric (FE) transition at room temperature in van der Waals layered α-GeSe, employing Raman spectroscopy, transmission electron microscopy, second-harmonic generation, and piezoelectric force microscopy consolidated by first-principles calculations. An orientation-dependent AFE-FE transition provides strong evidence that the in-plane (IP) polarization vector aligns along the armchair rather than zigzag direction in α-GeSe. In addition, temperature-dependent Raman spectra showed that the IP polarization could sustain up to higher than 700 K. Our findings suggest that α-GeSe, which is also a potential ferrovalley material, could be a robust building block for creating artificial 2D multiferroics at room temperature.

GeSe photovoltaics: doping, interfacial layer and devices

Germanium selenide (GeSe) bulk crystals, thin films and solar cells are investigated with a focus on acceptor-doping with silver (Ag) and the use of an Sb2Se3 interfacial layer. The Ag-doping...

Rapid thermal annealing process for Se thin-film solar cells

Recently, selenium (Se) has regained interest as possible wide-bandgap photovoltaic material for silicon-based tandem applications. However, the easy sublimation of Se below the melting point (220 °C) brings challenges for...

Emerging Chalcogenide Thin Films for Solar Energy Harvesting Devices

Chalcogenide semiconductors offer excellent optoelectronic properties for their use in solar cells, exemplified by the commercialization of Cu(In,Ga)Se₂- and CdTe-based photovoltaic technologies. Recently, several other chalcogenides have emerged as promising photoabsorbers for energy harvesting through the conversion of solar energy to electricity and fuels. The goal of this review is to summarize the development of emerging binary (Sb₂X₃, GeX, SnX), ternary (Cu₂SnX₃, Cu₂GeX₃, CuSbX₂, AgBiX₂), and quaternary (Cu₂ZnSnX₄, Ag₂ZnSnX₄, Cu₂CdSnX₄, Cu₂ZnGeX₄, Cu₂BaSnX₄) chalcogenides (X denotes S/Se), focusing especially on the comparative analysis of their optoelectronic performance metrics, electronic band structure, and point defect characteristics. The performance limiting factors of these photoabsorbers are discussed, together with suggestions for further improvement. Several relatively unexplored classes of chalcogenide compounds (such as chalcogenide perovskites, bichalcogenides, etc.) are highlighted, based on promising early reports on their optoelectronic properties. Finally, pathways for practical applications of emerging chalcogenides in solar energy harvesting are discussed against the backdrop of a market dominated by Si-based solar cells.

Investigation of the sublimation mechanism of GeSe and GeS

GeSe and GeS have emerged as promising light-harvesting materials for photovoltaics due to their attractive optoelectronic properties, non-toxic and earth-abundant constituents, and excellent stability. Here we unveil the diatomic molecule sublimation mechanism of GeSe and GeS that directly guides the optimization of GeSe and GeS solar-cell fabricated via the close-space sublimation method.

Surface-Defect States in Photovoltaic Absorber GeSe

GeSe is an emerging promising light-harvesting material for photovoltaics due to its excellent optoelectronic properties, nontoxic and earth-abundant constituents, and high stability. In particular, perovskite-like antibonding states at the valence band maximum arising from Ge-4s and Se-4p coupling enable the bulk-defect-tolerant properties in GeSe. However, a fundamental understanding of surface-defect states in GeSe, another important factor for high-performance photovoltaics, is still lacking. Here, we investigate the surface-defect properties of GeSe through first-principle calculations. We find that different from common semiconductors possessing numerous surface dangling bonds, some GeSe surfaces are prone to reconstruction, thus eliminating the dangling bonds. The rearranged armchair edges exhibit unexpected benign defect properties, similar to those of bulk GeSe, arising from the formation of bulk-like [GeSe₃] tetrahedrons. We further show that the stable exposed (111) surfaces are hard to reconstruct due to the stiff structure but are effectively passivated by the addition of H.

Alternative Lone-Pair ns2 -Cation-Based Semiconductors beyond Lead Halide Perovskites for Optoelectronic Applications

Lead halide perovskites have emerged in the last decade as advantageous high-performance optoelectronic semiconductors, and have undergone rapid development for diverse applications such as solar cells, light-emitting diodes , and photodetectors. While material instability and lead toxicity are still major concerns hindering their commercialization, they offer promising prospects and design principles for developing promising optoelectronic materials. The distinguished optoelectronic properties of lead halide perovskites stem from the Pb²⁺ cation with a lone-pair 6s² electronic configuration embedded in a mixed covalent-ionic bonding lattice. Herein, we summarize alternative Pb-free semiconductors containing lone-pair ns² cations, intending to offer insights for developing potential optoelectronic materials other than lead halide perovskites. We start with the physical underpinning of how the ns² cations within the material lattice allow for superior optoelectronic properties. We then review the emerging Pb-free semiconductors containing ns² cations in terms of structural dimensionality, which is crucial for optoelectronic performance. For each category of materials, the research progresses on crystal structures, electronic/optical properties, device applications, and recent efforts for performance enhancements are overviewed. Finally, the issues hindering the further developments of studied materials are surveyed along with possible strategies to overcome them, which also provides an outlook on the future research in this field.

Interfacial Strain Engineering in Wide-Bandgap GeS Thin Films for Photovoltaics

Wide-bandgap semiconductors exhibiting a bandgap of ∼1.7-1.9 eV have generated great interest recently due to their important applications in tandem solar cells as top cells and emerging indoor photovoltaics. However, concerns about the stability and toxicity especially in indoor application limit the choice of these materials. Here we report a new member of this family, germanium monosulfide (GeS); this material displays a wide bandgap of 1.7 eV, nontoxic and earth-abundant constituents, and high stability. We find that the little success of GeS solar cells to date is primarily attributed to the challenge in fabricating high-quality polycrystalline GeS films, wherein the high thermal expansion coefficient (α = 3.1 × 10-5 K-1) combined with high crystallization temperature (375 °C) of GeS induces large tensile strain in the GeS film that peels off GeS from the substrate. By introducing a high-α buffer layer between GeS and substrate, we achieve a high-quality polycrystalline GeS thin film that compactly adheres to substrate with no voids. Solar cells fabricated by these GeS films show a power conversion efficiency of 1.36% under AM 1.5G illumination (100 mW cm-2). The unencapsulated devices are stable when stored in ambient atmosphere for 1500 h. Their efficiencies further increase to 3.6% under indoor illumination of 1000 lux.

Exciton-Phonon Interactions in Monolayer Germanium Selenide from First Principles

We investigate from first principles exciton-phonon interactions in monolayer germanium selenide, a direct gap two-dimensional semiconductor. By combining the Bethe-Salpeter approach and the special displacement method, we explore the phonon-induced renormalization of the exciton wave functions, excitation energies, and oscillator strengths. We determine a renormalization of the optical gap of 0.1 eV at room temperature, which results from the coupling of the exciton with both acoustic and optical phonons, with the strongest coupling to optical phonons at ∼100 cm^-1. We also find that the exciton-phonon interaction is similar between monolayer and bulk GeSe. Overall, we demonstrate that the combination of many-body perturbation theory and special displacements offers a new route to investigate electron-phonon couplings in excitonic spectra, the resulting band gap renormalization, and the nature of phonons that couple to the exciton.