Liquid flow reversibly creates a macroscopic surface charge gradient

Adsorption, Orientation, and Speciation of Amino Acids at Air-Aqueous Interfaces for the Direct Air Capture of CO2

Amino acids make up a promising family of molecules capable of direct air capture (DAC) of CO2 from the atmosphere. Under alkaline conditions, CO2 reacts with the anionic form of an amino acid to produce carbamates and deactivated zwitterionic amino acids. The presence of the various species of amino acids and reactive intermediates can have a significant effect on DAC chemistry, the role of which is poorly understood. In this study, all-atom molecular dynamics (MD) based computational simulations and vibrational sum frequency generation (vSFG) spectroscopy studies were conducted to understand the role of competitive interactions at the air-aqueous interface in the context of DAC. We find that the presence of potassium bicarbonate ions, in combination with the anionic and zwitterionic forms of amino acids, induces concentration and charge gradients at the interface, generating a layered molecular arrangement that changes under pre- and post-DAC conditions. In parallel, an enhancement in the surface activity of both anionic and zwitterionic forms of amino acids is observed, which is attributed to enhanced interfacial stability and favorable intermolecular interactions between the adsorbed amino acids in their anionic and zwitterionic forms. The collective influence of these competitive interactions, along with the resulting interfacial heterogeneity, may in turn affect subsequent capture reactions and associated rates. These effects underscore the need to consider dynamic changes in interfacial chemical makeup to enhance DAC efficiency and to develop successful negative emission and storage technologies.

Spontaneous Wetting Induced by Contact-Electrification at Liquid-Solid Interface

Wettability significantly influences various surface interactions and applications at the liquid-solid interface. However, the understanding is complicated by the intricate charge exchange occurring through contact electrification (CE) during this process. The understanding of the influence of triboelectric charge on wettability remains challenging, especially due to the complexities involved in concurrently measuring contact angles and interfacial electrical signals. Here, the relationship is investigated between surface charge density and change of contact angle of dielectric films after contact with water droplets. It is observed that the charge exchange when water spared lead to a spontaneous wetting phenomenon, which is termed as the contact electrification induced wetting (CEW). Notably, these results demonstrate a linear dependence between the change of contact angle (CA) of the materials and the density of surface charge on the solid surface. Continuous CEW tests show that not only the static CA but also the dynamics of wetting are influenced by the accumulation charges at the interface. The mechanism behind CEW involves the redistribution of surface charges on a solid surface and polar water molecules within liquid. This interaction results in a decrease in interface energy, leading to a reduction in the CA. Ab initio calculations suggest that the reduction in interface energy may stem from the enhanced surface charge on the substrate, which strengthens the hydrogen bond interaction between water and the substrate. These findings have the potential to advance the understanding of CE and wetting phenomena, with applications in energy harvesting, catalysis, and droplet manipulation at liquid-solid interfaces.

Charge Transfer Quenching and Maximum of a Liquid-Air Contact Line Moving over a Hydrophobic Surface

Charge transfer when a hydrophobic fluoropolymer surface comes in contact with salt solutions of water, methanol, and glycerol is investigated. It is found that the charge transfer decreases faster with an increasing fraction of glycerol in water than it does with methanol in water. It is also demonstrated that for both mixtures, the charge transfer increases with the amount of added sodium chloride for small concentrations but then reaches a maximum and subsequently decreases. Surprisingly, this maximum charge transfer shifts toward higher salt concentrations with increasing amount of glycerol in water. However, in water-methanol mixtures, one does not observe a similar shift in charge transfer maximum toward higher salt concentrations. These observations are explained using a model, taking into account the decreased shear distance from the hydrophobic surface for which ions are removed from the electrical double layer due to an interplay of forces acting on the ions.

Unravelling the interfacial water structure at the photocatalyst strontium titanate by sum frequency generation spectroscopy

The direct conversion of solar energy to hydrogen is considered as a possible method to produce carbon neutral hydrogen fuel. The mechanism of photocatalytic water splitting involves the chemical breakdown of water and re-assembly into hydrogen and oxygen at the interface of a photocatalyst. The selection rules of a suitable material are well established, but the fundamental understanding of the mechanisms, occurring at the interface between the catalyst and the water, remains missing. Using surface specific sum frequency generation spectroscopy, we present here characterisation of the interface between water and the photocatalyst strontium titanate (SrTiO3). We monitor the OH-stretching vibrations present at the interface. Their variations of intensities and frequencies as functions of isotopic dilution, pH and salt concentration provide information about the nature of the hydrogen bonding environment. We observe the presence of water molecules that flip their orientation at pH 5 indicating the point of zero charge of the SrTiO3 layer. These water molecules are oriented with their hydrogen away from the surface when the pH of the solutions is below 5 and pointing towards the surface when the pH is higher than 5. Besides, water molecules donating a H-bond to probably surface TiOH groups are observed at all pH.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Ion Concentration Influences the Charge Transfer Due to a Water-Air Contact Line Moving over a Hydrophobic Surface: Charge Measurements and Theoretical Models

A metal electrode covered by an inert, hydrophobic polymer surface is dipped into water, and the charge transfer was measured as a function of ion concentration for different chlorides, sulfates, and nitrates. A generic behavior is observed wherein the charge transfer first increases and then decreases as the ion concentration increases. However, for acids, the charge transfer decreases monotonously with concentration and even reverses polarity. Two different models, both in which the charge transfer is attributed to removal of ions from the electrical double layer as the contact line passes by, are discussed and shown to provide possible explanations of the experimental data.

Long-term memory and synapse-like dynamics in two-dimensional nanofluidic channels

Fine-tuned ion transport across nanoscale pores is key to many biological processes, including neurotransmission. Recent advances have enabled the confinement of water and ions to two dimensions, unveiling transport properties inaccessible at larger scales and triggering hopes of reproducing the ionic machinery of biological systems. Here we report experiments demonstrating the emergence of memory in the transport of aqueous electrolytes across (sub)nanoscale channels. We unveil two types of nanofluidic memristors depending on channel material and confinement, with memory ranging from minutes to hours. We explain how large time scales could emerge from interfacial processes such as ionic self-assembly or surface adsorption. Such behavior allowed us to implement Hebbian learning with nanofluidic systems. This result lays the foundation for biomimetic computations on aqueous electrolytic chips.

Ion Adsorption and Desorption at the CaF2 -Water Interface Probed by Flow Experiments and Vibrational Spectroscopy

The dissolution of minerals in contact with water plays a crucial role in geochemistry. However, obtaining molecular insight into interfacial chemistry is challenging. Dissolution typically involves the release of ions from the surface, giving rise to a charged mineral surface. This charge affects the interfacial water arrangement, which can be investigated by surface-specific vibrational Sum Frequency Generation (v-SFG) spectroscopy. For the fluorite-water interface, recent spectroscopic studies concluded that fluoride adsorption/desorption determines the surface charge, which contrasts zeta potential measurements assigning this role to the calcium ion. By combining v-SFG spectroscopy and flow experiments with systematically suppressed dissolution, we uncover the interplay of dominant fluoride and weak calcium adsorption/desorption, resolving the controversy in the literature. We infer the calcium contribution to be orders of magnitude smaller, emphasizing the sensitivity of our approach.

Liquid-Solid Interfaces under Dynamic Shear Flow: Recent Insights into the Interfacial Slip

The development of micro/nanofluidic techniques has recently revived interest in dynamic shear flow at liquid-solid interfaces. When the nature of the liquid-solid boundaries was revisited, the slip of the fluids relative to the solid wall was predicted theoretically and confirmed experimentally. This indicates that the molecular-level structures of the liquid-solid interfaces will be influenced by the liquid flow over certain temporal and spatial criteria. However, the fluid flow at the boundary layer still cannot be precisely predicted and effectively controlled, somehow limiting its practical applications. Here, we summarize the recent advances for the microscopic structures at the liquid-solid interfaces upon shear flow. Special attention was given to a second-order nonlinear optical technique, sum frequency generation vibrational spectroscopy, which is a powerful tool for exploring the molecular-level structures and structural dynamics at the liquid-solid interfaces and offering new insights into the molecular mechanisms of the fluid slip at the interfaces. Moreover, we discuss the possible approaches for controlling the interfacial slip at the molecular level and highlight the current challenges and opportunities. Although the theoretical framework of the slip at the liquid-solid interfaces is still incomplete, we hope that this Perspective will complement and enhance our understanding of various interfacial properties and phenomena with respect to practical non-equilibrium dynamic processes happening at the interfaces.

Surface Protolysis and Its Kinetics Impact the Electrical Double Layer

Surface conductivity in the electrical double layer (EDL) is known to be affected by proton hopping and diffusion at solid-liquid interfaces. Yet, the role of surface protolysis and its kinetics on the thermodynamic and transport properties of the EDL are usually ignored as physical models consider static surfaces. Here, using a novel molecular dynamics method mimicking surface protolysis, we unveil the impact of such chemical events on the system's response. Protolysis is found to strongly affect the EDL and electrokinetic aspects with major changes in ζ potential and electro-osmotic flow.

Flow effects on the surface properties of surfactant foam films

The surface electrostatic properties of liquid foam, involving the electrokinetic (EK) phenomena in the liquid-gas interface, have significant effects on the stability of the foam. Here, we established a theoretical model for ion transport in liquid films by combining the liquid flow and surface reaction. We found that the surface electrostatic properties of liquid foams were influenced unexpectedly by the pressure-induced flow. The liquid flow will induce the potential and concentration differences in the flow direction. When the pressure drop increases to a certain high value, the induced potential and salt concentration difference increases, leading to the change of the surface electrostatic properties such as zeta potential and the surface charge density. This change shows that the surface electrostatic properties of foam films depend on the coupling of various factors including ion distribution and pressure drop, which deepens our understanding of the electrostatic properties of the foam films.

Anomalous interfacial dynamics of single proton charges in binary aqueous solutions

Our understanding of the dynamics of charge transfer between solid surfaces and liquid electrolytes has been hampered by the difficulties in obtaining interface, charge, and solvent-specific information at both high spatial and temporal resolution. Here, we measure at the single charge scale the dynamics of protons at the interface between an hBN crystal and binary mixtures of water and organic amphiphilic solvents (alcohols and acetone), evidencing a marked influence of solvation on interfacial dynamics. Applying single-molecule localization microscopy to emissive crystal defects, we observe correlated activation between adjacent ionizable surface defects, mediated by the transport of single excess protons along the solid/liquid interface. Solvent content has a nontrivial effect on interfacial dynamics, leading at intermediate water fraction to an increased surface diffusivity, as well as an increased affinity of the proton charges to the solid surface. Our measurements evidence the notable role of solvation on interfacial proton charge transport.