High performance temperature difference triboelectric nanogenerator

Performance optimization and comparison of vertical motion-based triboelectric nanogenerators

The vertical motion configuration is a common design in triboelectric nanogenerators (TENGs) for energy harvesting; however, the performance optimization and comparison are still vague between various vertical motion-based structures. In this paper, time-averaged power density is defined as a metric to compare the power output performances of vertically structured TENGs, including contact mode and freestanding mode. To ensure comparisons under the same circumstances, a novel sandwich-structured dielectric layer was designed to maintain a stable and consistent surface charge density, with an extra rotating triboelectric nanogenerator working as a charge pump. We also investigated the impact of parasitic capacitance, which is a primary source of error in theoretical optimization. The freestanding TENG (FTENG) with a single dielectric layer demonstrates superior power performance, even when accounting for the influence of parasitic capacitance. This work provides valuable insights and guidelines for the design of high-performance mechanical energy harvesting devices.

Triboelectric Basalt Textiles Efficiently Operating within an Ultrawide Temperature Range

With the continuous upsurge in demand for wearable energy, nanogenerators are increasingly required to operate under extreme environmental conditions. Even though they are at the cutting edge of technology, nanogenerators have difficulty producing high-quality electrical output at very extreme temperatures. Here, a triboelectric basalt textile (TBT) with an ultrawide operational temperature range (from -196 to 520 °C) is created employing basalt material as the main body. The output power density of the TBT, in contrast to most conventional nanogenerators, would counterintuitively rise by 2.3 times to 740.6 mW m-2 after heating to 100 °C because the high temperature will enhance the material's interface polarization and electronic kinetic energy. The TBT retains ≈55% of its initial electrical output even after heating in the flame of an alcohol lamp (520 °C). Surprisingly, the TBTs output voltage may retain over 85% of its initial value even after submerging in liquid nitrogen. The TBTs exceptional resistance to heat and cold indicates its possible use in high and low latitudes, high altitudes, deserts, and even space settings.

Phase-Directed Assembly of Triboelectric Nanopaper for Self-Powered Noncontact Sensing

Noncontact sensing technology serves as a pivotal medium for seamless data acquisition and intelligent perception in the era of the Internet of Things (IoT), bringing innovative interactive experiences to wearable human-machine interaction perception networks. However, the pervasive limitations of current noncontact sensing devices posed by harsh environmental conditions hinder the precision and stability of signals. In this study, the triboelectric nanopaper prepared by a phase-directed assembly strategy is presented, which possesses low charge transfer mobility (1618 cm2 V-1 s-1) and exceptional high-temperature stability. Wearable self-powered noncontact sensors constructed from triboelectric nanopaper operate stably under high temperatures (200 °C). Furthermore, a temperature warning system for workers in hazardous environments is demonstrated, capable of nonintrusively identifying harmful thermal stimuli and detecting motion status. This research not only establishes a technological foundation for accurate and stable noncontact sensing under high temperatures but also promotes the sustainable intelligent development of wearable IoT devices under extreme environments.

A multifunctional triboelectric nanogenerator based on PDMS/MXene for bio-mechanical energy harvesting and volleyball training monitoring

Within the domain of wearable devices that are self-powered and sensory, triboelectric nanogenerators (TENGs) have surfaced as a notable solution to meet the growing needs for energy harvesting. This study unveils an innovative wearable and stretchable multifunctional double-layered TENG, based on PDMS/MXene, known as PM-TENG. Furthermore, PM-TENG can also be used as a joint sensor to monitor the movement of athletes' joints during volleyball training. By augmenting the matrix with PDMS/MXene, which possesses dual capabilities-namely, charge capture and charge movement-the intermediary layer is integrated. This leads to a two fold increase in the ability to trap charges and the overall triboelectric performance. With a power density reaching 11.27 mW, it notably exceeds the performance of its counterparts that solely utilize PDMS, by nearly 11 times. This academic effort elucidates the important role of PM-TENG in biomechanical energy capture and autonomous wearable sports motion sensing.

Fast-Curing of Liquid Crystal Thermosets Enabled by End-Groups Regulation and In Situ Monitoring by Triboelectric Spectroscopy

The development of high-performance polymer is crucial for the fabrication of triboelectric nanogenerators (TENGs) used in extreme conditions. Liquid crystal polyarylate thermosets (LCTs) demonstrate great potential as triboelectric material by virtue of exceptional comprehensive properties. However, there are only a few specific end-groups like phenylethynyl matching the LCT polycondensation temperature (above 300 °C). Moreover, the excellent properties of LCTs rely on the crosslinked network formed with long curing time at high temperature, restricting their further application in triboelectric material. Herein, a fast-curing LCT is designed by terminating with 4-maleimidophenol possessing appropriate reactivity. The resultant LCT (MA-LC-MA) exhibits much lower polycondensation temperature (250-270 °C) and curing temperature of 300 °C within only 1 min compared to typical LCTs (cured at 370 °C for 1 h). Furthermore, the cured MA-LC-MA retains a high glass transition temperature of 135 °C, storage modulus of 6 MPa even at 350 °C, and great electrical output performance. Additionally, triboelectric measurement related to the dielectric properties that vary with crosslinked network is innovatively utilized as an analysis technique of curing progress. This work provides a new strategy to design high-performance TENGs and promotes the development of next generation thermosets in extreme conditions.

A wearable flexible triboelectric nanogenerator for bio-mechanical energy harvesting and badminton monitoring

Recently, textile materials used for wearable flexible sensors have received much attention. Wearable textile based triboelectric nanogenerator (TENG) not only has unique advantages in mechanical energy harvesting, but also has application value in the direction of motion sensing. Here, we proposed a non-woven fabric triboelectric nanogenerator (NW-TENG) for mechanical energy harvesting and badminton monitoring. The non-woven fabric play the role of positive triboelectric, and the fluffy fiber structure endows NW-TENG with a sensitive response to pressure. The pressure sensing sensitivity of NW-TENG sensor can reach 1.22 V N-1 (Pressure range: 0-7 N) and 0.18 V N-1 (Pressure range: 8 N-55 N). Furthermore, the NW-TENG can be installed on the body joints of badminton players for analyzing joint movements, thereby achieving data-driven badminton training and facilitating the evaluation of training effectiveness. This research provide a new path to promote TENG to the badminton monitoring field.

Dynamic Thermostable Cellulosic Triboelectric Materials from Multilevel-Non-Covalent Interactions

Triboelectric materials present great potential for harvesting huge amounts of dispersed energy, and converting them directly into useful electricity, a process that generates power more sustainably. Triboelectric nanogenerators (TENGs) have emerged as a technology to power electronics and sensors, and it is expected to solve the problem of energy harvesting and self-powered sensing from extreme environments. In this paper, a high-temperature-resistant triboelectric material is designed based on multilevel non-covalent bonding interactions, which achieves an ultra-high surface charge density of 192 µC m-2 at high temperatures. TENGs based on the triboelectric material exhibit more than an order of magnitude higher power output (2750 mW m-2 at 200 °C) than the existing devices at high temperatures. These remarkable properties are achieved based on enthalpy-driven molecular assembly in highly unbonded states. Thus, the material maintains bond strength and ultra-high surface charge density in entropy-dominated high-temperature environments. This molecular design concept points out a promising direction for the preparation of polymers with excellent triboelectric properties.

Strategies to Improve the Output Performance of Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) can collect and convert random mechanical energy into electric energy, with remarkable advantages including broadly available materials, straightforward preparation, and multiple applications. Over the years, researchers have made substantial advancements in the theoretical and practical aspects of TENG. Nevertheless, the pivotal challenge in realizing full applications of TENG lies in ensuring that the generated output meets the specific application requirements. Consequently, substantial research is dedicated to exploring methods and mechanisms for enhancing the output performance of TENG devices. This review aims to comprehensively examine the influencing factors and corresponding improvement strategies of the output performance based on the contact electrification mechanism and operational principles that underlie TENG technology. This review primarily delves into five key areas of improvement: materials selection, surface modification, component adjustments, structural optimization, and electrode enhancements. These aspects are crucial in tailoring TENG devices to meet the desired performance metrics for various applications.

A Review of Contact Electrification at Diversified Interfaces and Related Applications on Triboelectric Nanogenerator

The triboelectric nanogenerator (TENG) can effectively collect energy based on contact electrification (CE) at diverse interfaces, including solid-solid, liquid-solid, liquid-liquid, gas-solid, and gas-liquid. This enables energy harvesting from sources such as water, wind, and sound. In this review, we provide an overview of the coexistence of electron and ion transfer in the CE process. We elucidate the diverse dominant mechanisms observed at different interfaces and emphasize the interconnectedness and complementary nature of interface studies. The review also offers a comprehensive summary of the factors influencing charge transfer and the advancements in interfacial modification techniques. Additionally, we highlight the wide range of applications stemming from the distinctive characteristics of charge transfer at various interfaces. Finally, this review elucidates the future opportunities and challenges that interface CE may encounter. We anticipate that this review can offer valuable insights for future research on interface CE and facilitate the continued development and industrialization of TENG.

Recycled, Contaminated, Crumpled Aluminum Foil-Driven Triboelectric Nanogenerator

With rapid urbanization and global population growth, the amount of wasted aluminum foil is significantly increasing. Most deformed and contaminated foil is difficult to recycle; hence, it is landfilled or incinerated, causing environmental pollution. Therefore, using aluminum foil waste for electricity may be conducive to addressing environmental problems. In this regard, various literatures have explored the concept of energy generation using foil, while a crumple ball design for this purpose has not been studied. Thus, a recycled foil-based crumpled ball triboelectric nanogenerator (RFCB-TENG) is proposed. The crumpled ball design can minimize the effects of contamination on foil, ensuring efficient power output. Moreover, owing to novel crumpled design, the RFCB-TENG has some outstanding characteristics to become a sustainable power source, such as ultralight weight, low noise, and high durability. By introducing the air-breakdown model, the RFCB-TENG achieved an output peak voltage of 648 V, a current of 8.1 mA cm3 , and an optimum power of 162.7 mW cm3 . The structure of the RFCB-TENG is systemically optimized depending on the design parameters to realize the optimum output performance. Finally, the RFCB-TENG operated 500 LEDs and 30-W commercial lamps. This work paves the guideline for effectively fabricating the TENG using waste-materials while exhibiting outstanding characteristics.

Recent Progress of Advanced Materials for Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) have received intense attention due to their broad application prospects in the new era of internet of things (IoTs) as distributed power sources and self-powered sensors. Advanced materials are vital components for TENGs, which decide their comprehensive performance and application scenarios, opening up the opportunity to develop efficient TENGs and expand their potential applications. In this review, a systematic and comprehensive overview of the advanced materials for TENGs is presented, including materials classifications, fabrication methods, and the properties required for applications. In particular, the triboelectric, friction, and dielectric performance of advanced materials is focused upon and their roles in designing the TENGs are analyzed. The recent progress of advanced materials used in TENGs for mechanical energy harvesting and self-powered sensors is also summarized. Finally, an overview of the emerging challenges, strategies, and opportunities for research and development of advanced materials for TENGs is provided.

Pyrazine-Functionalized Donor-Acceptor Covalent Organic Frameworks for Enhanced Photocatalytic H2 Evolution with High Proton Transport

The well-defined 2D or 3D structure of covalent organic frameworks (COFs) makes it have great potential in photoelectric conversion and ions conduction fields. Herein, a new donor-accepter (D-A) COF material, named PyPz-COF, constructed from electron donor 4,4',4″,4'″-(pyrene-1,3,6,8-tetrayl)tetraaniline and electron accepter 4,4'-(pyrazine-2,5-diyl)dibenzaldehyde with an ordered and stable π-conjugated structure is reported. Interestingly, the introduction of pyrazine ring endows the PyPz-COF a distinct optical, electrochemical, charge-transfer properties, and also brings plentiful CN groups that enrich the proton by hydrogen bonds to enhance the photocatalysis performance. Thus, PyPz-COF exhibits a significantly improved photocatalytic hydrogen generation performance up to 7542 µmol g^-1 h^-1 with Pt as cocatalyst, also in clear contrast to that of PyTp-COF without pyrazine introduction (1714 µmol g^-1 h^-1 ). Moreover, the abundant nitrogen sites of the pyrazine ring and the well-defined 1D nanochannels enable the as-prepared COFs to immobilize H₃ PO₄ proton carriers in COFs through hydrogen bond confinement. The resulting material has an impressive proton conduction up to 8.10 × 10^-2 S cm^-1 at 353 K, 98% RH. This work will inspire the design and synthesis of COF-based materials with both efficient photocatalysis and proton conduction performance in the future.

Harvesting Environment Mechanical Energy by Direct Current Triboelectric Nanogenerators

As hundreds of millions of distributed devices appear in every corner of our lives for information collection and transmission in big data era, the biggest challenge is the energy supply for these devices and the signal transmission of sensors. Triboelectric nanogenerator (TENG) as a new energy technology meets the increasing demand of today's distributed energy supply due to its ability to convert the ambient mechanical energy into electric energy. Meanwhile, TENG can also be used as a sensing system. Direct current triboelectric nanogenerator (DC-TENG) can directly supply power to electronic devices without additional rectification. It has been one of the most important developments of TENG in recent years. Herein, we review recent progress in the novel structure designs, working mechanism and corresponding method to improve the output performance for DC-TENGs from the aspect of mechanical rectifier, tribovoltaic effect, phase control, mechanical delay switch and air-discharge. The basic theory of each mode, key merits and potential development are discussed in detail. At last, we provide a guideline for future challenges of DC-TENGs, and a strategy for improving the output performance for commercial applications.

Flexible Triboelectric Tactile Sensor Based on a Robust MXene/Leather Film for Human-Machine Interaction

With the rapid development of Internet of Things (IoT) technology in recent years, self-actuated sensor systems without an external power supply such as flexible triboelectric nanogenerator (TENG)-based strain sensors have received wide attention due to their simple structure and self-powered active sensing properties. However, to satisfy the practical applications of human wearable biointegration, flexible TENGs impose higher requirements for establishing a balance between material flexibility and good electrical properties. In this work, the strength of the MXene/substrate interface was greatly improved by utilizing leather with a unique surface structure as the substrate material, resulting in a mechanically strong and electrically conductive MXene film. Due to the natural fiber structure of the leather surface, the surface of the MXene film with a rough structure was obtained, which improved the electrical output performance of the TENG. The electrode output voltage of MXene film on leather based on single-electrode TENG can reach 199.56 V and the maximum output power density can reach 0.469 mW/cm². Combined with laser-assisted technology, the efficient array preparation of MXene and graphene was achieved and applied to various human-machine interface (HMI) applications.

Solid-Liquid Triboelectric Nanogenerator Based on Vortex-Induced Resonance

Energy converters based on vortex-induced vibrations (VIV) have shown great potential for harvesting energy from low-velocity flows, which constitute a significant portion of ocean energy. However, solid-solid triboelectric nanogenerators (TENG) are not wear-resistant in corrosive environments. Therefore, to effectively harvest ocean energy over the long term, a novel solid-liquid triboelectric nanogenerator based on vortex-induced resonance (VIV-SL-TENG) is presented. The energy is harvested through the resonance between VIV of a cylinder and the relative motions of solid-liquid friction pairs inside the cylinder. The factors that affect the output performance of the system, including the liquid mass ratio and the deflection angle of the friction plates, are studied and optimized by establishing mathematical models and conducting computational fluid dynamics simulations. Furthermore, an experimental platform for the VIV-SL-TENG system is constructed to test and validate the performance of the harvester under different conditions. The experiments demonstrate that the energy harvester can successfully convert VIV energy into electrical energy and reach maximum output voltage in the resonance state. As a new type of energy harvester, the presented design shows a promising potential in the field of 'blue energy' harvesting.

Robust Displacement Sensing by Direct-Current Triboelectric Nanogenerator Via Intelligent Waveform Recognition

A triboelectric nanogenerator (TENG) facilitates the advancement of self-powered displacement sensors, which are important for many autonomous intelligent microsystems. However, the amplitude-based displacement sensing of conventional TENG-based sensors still suffers significantly from varying charge densities in harsh environments. Benefiting from the combination of intelligent signal processing algorithms and direct-current TENG sensors, this study proposes an environmentally robust character-based displacement sensing method that eliminates the influences of varying charge density in principle. The experimental results show that under drastically changing air humidity and other harsh environments, the sensing of threshold and maximum displacement has far superior consistency and stability than that of traditional amplitude-based TENG sensors, providing a novel route to realize reliable self-powered displacement sensing in environment-variable applications.

Magnetic-field-controlled counterion migration within polyionic liquid micropores enables nano-energy harvest

Efficient separation of positive and negative charges is essential for developing high-performance nanogenerators. In this article, we describe a method that was not previously demonstrated to separate charges which enables us to fabricate a magnetic energy harvesting device. The magnetic field induces the migration of the mobile magnetic counterions (Dy(NO₃)₄^-) which establishes anion gradients within a layer of polyionic liquid micropores (PLM). The PLM is covalently cross-linked on which the positive charges are fixed on the matrix, that is, immobile. In a device with a structure of Au/dielectric//mag-PLM//dielectric/Au, the charge gradient is subsequently transformed into the output voltage through electrostatic induction. Removing the magnetic field leads to the backflow of magnetic anions which produces a voltage with a similar magnitude but reversed polarity. The parameters in fabricating the magnetic PLM such as photoinitiator concentration, UV irradiation time, water treatment time, and temperature are found to dramatically influence the size of micropores and the effective concentration of magnetic anions. Under optimized conditions, an output voltage with an amplitude of approximately 4 V is finally achieved. We expect this new method could find practical applications in further improving the output performance.

Chemo-Mechanical Energy Harvesters with Enhanced Intrinsic Electrochemical Capacitance in Carbon Nanotube Yarns

Predicting and preventing disasters in difficult-to-access environments, such as oceans, requires self-powered monitoring devices. Since the need to periodically charge and replace batteries is an economic and environmental concern, energy harvesting from external stimuli to supply electricity to batteries is increasingly being considered. Especially, in aqueous environments including electrolytes, coiled carbon nanotube (CNT) yarn harvesters have been reported as an emerging approach for converting mechanical energy into electrical energy driven by large and reversible capacitance changes under stretching and releasing. To realize enhanced harvesting performance, experimental and computational approaches to optimize structural homogeneity and electrochemical accessible area in CNT yarns to maximize intrinsic electrochemical capacitance (IEC) and stretch-induced changes are presented here. Enhanced IEC further enables to decrease matching impedance for more energy efficient circuits with harvesters. In an ocean-like environment with a frequency from 0.1 to 1 Hz, the proposed harvester demonstrates the highest volumetric power (1.6-10.45 mW cm^-3 ) of all mechanical harvesters reported in the literature to the knowledge of the authors. Additionally, a high electrical peak power of 540 W kg^-1 and energy conversion efficiency of 2.15% are obtained from torsional and tensile mechanical energy.

High-Performance Liquid Crystalline Polymer for Intrinsic Fire-Resistant and Flexible Triboelectric Nanogenerators

Flammability is a great challenge in the fields of electronics. The emergence of triboelectric nanogenerators (TENGs) provides a safe way to harvest environmentalally friendly energy and convert it into more secure power sources. Especially, polymer-based TENGs significantly accelerate the practical application of self-powered flexible electronics. However, most of the existing polymeric materials for TENGs are easily flammable and melt, dripping, in a fire scenario, and cannot be reused after combustion, which greatly limits the application of TENGs under extreme conditions. Herein, a fire-resistant TENG based on all-aromatic liquid crystalline poly(aryl ether ester) (LCP_AEE ) synthesized via simple and efficient one-pot melt polycondensation is reported. The highly rigid main chain of LCP_AEE endows the LCP-TENG with outstanding anti-dripping, temperature- and fire-resistance. The resultant LCP-TENG exhibits excellent electrical output performance, which is attributed to the high dielectric constant (ε' = 4.8) and fibrous-structured morphology of LCP_AEE . The device can maintain over 65% of open-circuit voltage even after 16 s combustion (≈520 °C). Consequently, this work offers a novel strategy for tailoring the TENGs toward a secure power generator and electronics with fire hazard reduction, and potential application in firefighting, personal protection, and other extreme temperature environments.

An Open-Environment Tactile Sensing System: Toward Simple and Efficient Material Identification

Robotic perception can have simple and effective sensing functions that are unreachable for humans using only the isolated tactile perception method, with the assistance of a triboelectric nanogenerator (TENG). However, the reliability of triboelectric sensors remains a major challenge due to the inherent environmental limitations. Here, an intelligent tactile sensing system that combines a TENG and deep-learning technology is proposed. Using a triboelectric triple tactile sensor array, typical characteristics of each testing material can be maintained stably even under different contact conditions (touch conditions and external environmental conditions) by extracting features from three independent electrical signals as well as the normalized output signals. Furthermore, a convolutional neural network model is integrated, and a high accuracy of 96.62% is achieved in a material identification task. The tactile sensing system is exhibited to an open environment for material identification and the real-time demonstration. Compared to the complex process that humans must integrate multiple sensing (touching and viewing) to accomplish tactile perception, the proposed sensing system shows a huge advantage in cognitive learning for the visually impaired, biomimetic prosthetics, and virtual spaces construction.

The effect of metal surface nanomorphology on the output performance of a TENG

In this work, the effect of charge density and nanomorphology of a metal tip on the output performance of a triboelectric nanogenerator (TENG) is studied. The basic working principle of the TENG is charge transfer after separation of a metal and a polymer. There are different charge densities on different kinds of metal surface nanomorphology, which significantly influences the output performance of the TENG. Copper samples with different nanomorphology were obtained by controlling pH value, current density, electrolyte concentration, and temperature during the electrodeposition of copper. The samples were characterized using XRD and SEM. The output performance of the TENG is closely related to the size, charge density distribution, and shape of the metal nanoparticles.