Strong metal-support interactions induced by an ultrafast laser

Tuning the electronic structure and SMSI by integrating trimetallic sites with defective ceria for the CO2 reduction reaction

Heterogeneous catalysts have emerged as a potential key for closing the carbon cycle by converting carbon dioxide (CO2) into value-added chemicals. In this work, we report a highly active and stable ceria (CeO2)-based electronically tuned trimetallic catalyst for CO2 to CO conversion. A unique distribution of electron density between the defective ceria support and the trimetallic nanoparticles (of Ni, Cu, Zn) was established by creating the strong metal support interaction (SMSI) between them. The catalyst showed CO productivity of 49,279 mmol g-1 h-1 at 650 °C. CO selectivity up to 99% and excellent stability (rate remained unchanged even after 100 h) stemmed from the synergistic interactions among Ni-Cu-Zn sites and their SMSI with the defective ceria support. High-energy-resolution fluorescence-detection X-ray absorption spectroscopy (HERFD-XAS) confirmed this SMSI, further corroborated by in situ electron energy loss spectroscopy (EELS) and density functional theory (DFT) simulations. The in situ studies (HERFD-XAS & EELS) indicated the key role of oxygen vacancies of defective CeO2 during catalysis. The in situ transmission electron microscopy (TEM) imaging under catalytic conditions visualized the movement and growth of active trimetallic sites, which completely stopped once SMSI was established. In situ FTIR (supported by DFT) provided a molecular-level understanding of the formation of various reaction intermediates and their conversion into products, which followed a complex coupling of direct dissociation and redox pathway assisted by hydrogen, simultaneously on different active sites. Thus, sophisticated manipulation of electronic properties of trimetallic sites and defect dynamics significantly enhanced catalytic performance during CO2 to CO conversion.

Plasma-Catalyst Dynamics: Nonthermal Activation of Strong Metal-Support Interactions

Nonthermal plasma-surface interactions enable transformative advancements in green chemistry, healthcare, materials processing, pollution abatement, and the ever-growing area of plasma catalysis. In the context of plasma catalysis, the fate of the active sites during plasma treatment has remained enigmatic, and observation of low-temperature plasma-catalyst events has been challenging. The induction of strong metal-support interactions (SMSI) through high-temperature hydrogen treatment is a well-documented and established, yet limited, method to impact selectivity and stability of noble metal catalysts on reducible supports. Thermally driven SMSI occurs through reduction and subsequent migration of the support to the surface of exposed metal sites, thus affecting the catalyst both electronically and geometrically and serving as an ideal system to evaluate dynamic plasma-catalyst interactions. In this study, a dielectric barrier discharge of hydrogen was used to successfully induce a plasma-SMSI state (P-SMSI) in niobia-supported platinum particles at bulk-gas temperatures as low as -30 °C, which enhances the selectivity for propane dehydrogenation and offers conclusive evidence of plasma-catalyst interactions. Time-resolved spectroscopic evidence of this phenomenon was obtained in situ using a cryogenically cooled plasma IR transmission cell, which provided evidence of diffusion-controlled surface migration. Collectively, P-SMSI constitutes a promising, low-impact technology for synthesizing SMSI-enhanced catalysts with controllable active sites, and knowledge of the nonthermal plasma-catalyst dynamics is critical in designing materials for specific applications or selecting conditions of operation.

Two-Dimensional Catalysts: From Model to Reality

Two-dimensional (2D) materials have been utilized broadly in kinds of catalytic reactions due to their fully exposed active sites and special electronic structure. Compared with real catalysts, which are usually bulk or particle, 2D materials have more well-defined structures. With easily identified structure-modulated engineering, 2D materials become ideal models to figure out the catalytic structure-function relations, which is helpful for the precise design of catalysts. In this review, the unique function of 2D materials was summarized from model study to reality catalysis and application. It includes several typical 2D materials, such as graphene, transition metal dichalcogenides, metal, and metal (hydr)oxide materials. We introduced the structural characteristics of 2D materials and their advantages in model researches. It emphatically summarized how 2D materials serve as models to explore the structure-activity relationship by combining theoretical calculations and surface research. The opportunities of 2D materials and the challenges for fundamentals and applications they facing are also addressed. This review provides a reference for the design of catalyst structure and composition, and could inspire the realization of two-dimensional materials from model study to reality application in industry.

Patternable, high-precision, controllable wettability copper layers for 3D resin-based weather-resistant electronics and 3D liquid manipulation

The realization of 3D patterned metal layers with manipulable surface wettability has significant potential, especially in integrating microelectronics with weather resistance and multifunctional liquid manipulation. However, developing a facile and efficient method to bring it to fruition remains a great challenge. In this work, we proposed a novel 3D selective metallization strategy that combines stereolithography 3D printing with laser-induced selective metallization (LISM). Utilizing 355 nm UV or 1064 nm lasers, this strategy can prepare 3D conductive copper patterns (or circuits) with controlled wettability on various 3D-printed resin parts. The copper layer surface prepared via LISM formed microstructures similar to the papillae on the surface of a lotus leaf, and it spontaneously exhibited superhydrophobicity (156.6°) after aging in the air at room temperature. Superhydrophobic 3D circuits with self-cleaning, corrosion-resistant, and anti-condensation performance were successfully fabricated. By further treating the copper layer with a 355 nm UV laser, we realized the transformation of the superhydrophobic copper layer to a superhydrophilic state, enabling us to prepare high-precision superhydrophilic patterns or channels. A 3D self-driven flow channel was fabricated to successfully realize 3D liquid manipulation and small-scale chemical experiments.

Strong metal-support interaction (SMSI) in environmental catalysis: Mechanisms, application, regulation strategies, and breakthroughs

The strong metal-support interaction (SMSI) in supported catalysts plays a dominant role in catalytic degradation, upgrading, and remanufacturing of environmental pollutants. Previous studies have shown that SMSI is crucial in supported catalysts' activity and stability. However, for redox reactions catalyzed in environmental catalysis, the enhancement mechanism of SMSI-induced oxygen vacancy and electron transfer needs to be clarified. Additionally, the precise control of SMSI interface sites remains to be fully understood. Here we provide a systematic review of SMSI's catalytic mechanisms and control strategies in purifying gaseous pollutants, treating organic wastewater, and valorizing biomass solid waste. We explore the adsorption and activation mechanisms of SMSI in redox reactions by examining interfacial electron transfer, interfacial oxygen vacancy, and interfacial acidic sites. Furthermore, we develop a precise regulation strategy of SMSI from systematical perspectives of interface effect, crystal facet effect, size effect, guest ion doping, and modification effect. Importantly, we point out the drawbacks and breakthrough directions for SMSI regulation in environmental catalysis, including partial encapsulation strategy, size optimization strategy, interface oxygen vacancy strategy, and multi-component strategy. This review article provides the potential applications of SMSI and offers guidance for its controlled regulation in environmental catalysis.

Metal-support interactions in metal oxide-supported atomic, cluster, and nanoparticle catalysis

Supported metal catalysts are essential to a plethora of processes in the chemical industry. The overall performance of these catalysts depends strongly on the interaction of adsorbates at the atomic level, which can be manipulated and controlled by the different constituents of the active material (i.e., support and active metal). The description of catalyst activity and the relationship between active constituent and the support, or metal-support interactions (MSI), in heterogeneous (thermo)catalysts is a complex phenomenon with multivariate (dependent and independent) contributions that are difficult to disentangle, both experimentally and theoretically. So-called "strong metal-support interactions" have been reported for several decades and summarized in excellent review articles. However, in recent years, there has been a proliferation of new findings related to atomically dispersed metal sites, metal oxide defects, and, for example, the generation and evolution of MSI under reaction conditions, which has led to the designation of (sub)classifications of MSI deserving to be critically and systematically evaluated. These include dynamic restructuring under alternating redox and reaction conditions, adsorbate-induced MSI, and evidence of strong interactions in oxide-supported metal oxide catalysts. Here, we review recent literature on MSI in oxide-supported metal particles to provide an up-to-date understanding of the underlying physicochemical principles that dominate the observed effects in supported metal atomic, cluster, and nanoparticle catalysts. Critical evaluation of different subclassifications of MSI is provided, along with discussions on the formation mechanisms, theoretical and characterization advances, and tuning strategies to manipulate catalytic reaction performance. We also provide a perspective on the future of the field, and we discuss the analysis of different MSI effects on catalysis quantitatively.

Using In situ Transmission Electron Microscopy to Study Strong Metal-Support Interactions in Heterogeneous Catalysis

Precisely controlling the microstructure of supported metal catalysts and regulating metal-support interactions at the atomic level are essential for achieving highly efficient heterogeneous catalysts. Strong metal-support interaction (SMSI) not only stabilizes metal nanoparticles and improves their resistance to sintering but also modulates the electrical interaction between metal species and the support, optimizing the catalytic activity and selectivity. Therefore, understating the formation mechanism of SMSI and its dynamic evolution during the chemical reaction at the atomic scale is crucial for guiding the structural design and performance optimization of supported metal catalysts. Recent advancements in in situ transmission electron microscopy (TEM) have shed new light on these complex phenomena, providing deeper insights into the SMSI dynamics. Here, the research progress of in situ TEM investigation on SMSI in heterogeneous catalysis is systematically reviewed, focusing on the formation dynamics, structural evolution during the catalytic reactions, and regulation methods of SMSI. The significant advantages of in situ TEM technologies for SMSI research are also highlighted. Moreover, the challenges and probable development paths of in situ TEM studies on the SMSI are also provided.

Thermally Stable Oxide-Capsulated Metal Nanoparticles Structure for Strong Metal-Support Interaction via Ultrafast Laser Plasmonic Nanowelding

Strong metal-support interaction (SMSI) has drawn much attention in heterogeneous catalysts due to its stable and excellent catalytic efficiency. However, construction of high-performance oxide-capsulated metal nanostructures meets great challenge in materials thermodynamic compatibility. In this work, dynamically controlled formation of oxide-capsulated metal nanoparticles (NPs) structures is demonstrated by ultrafast laser plasmonic nanowelding. Under the strong localized electromagnetic field interaction, metal (Au) NPs are dragged by an optical force toward oxide NPs (TiO2). Intense energy is simultaneously injected into this heterojunction area, where TiO2 is precisely ablated. With the embedding of metal into oxide, optical force on Au gradually turned from attractive to repulsive due to the varied metal-dielectric environment. Meanwhile, local ablated oxides are redeposited on Au NP. Upon the whole coverage of metal NP, the implantation behavior of metal NP is stopped, resulting in a controlled metal-oxide eccentric structure with capsulated oxide layer thickness ≈0.72-1.30 nm. These oxide-capsulated metal NPs structures can preserve their configurations even after thermal annealing in air at 600 °C for 10 min. This ultrafast laser plasmonic nanowelding can also extend to oxide-capsulated metal nanostructure fabrication with broad materials combinations (e.g., Au/ZnO, Au/MgO, etc.), which shows great potential in designing/constructing nanoscale high-performance catalysts.

Electronic Oxide-Metal Strong Interactions (EOMSI) Localized at CeOx-Ag Interface

Electronic oxide-metal strong interactions (EOMSI) refer to the electronic oxide-metal interactions (EOMI) between oxide adlayers and underlying metal substrate that is strong enough to stabilize supported oxide adlayers in a low-oxidation state, which individually is not stable under an ambient condition, from high temperature oxidation in air to a certain extent. Herein we report the deposition and electronic structure of CeOx adlayers on capping ligand-free cubic Ag nanocrystals, i.e., CeOx/Ag inverse catalysts. The EOMI occur via the charge transfer from Ag substrate to CeOx adlayers in the CeOx/Ag inverse catalyst, and the EOMSI are observed in the CeOx/Ag inverse catalyst with the average thickness of CeOx adlayers about 0.9 nm to exclusively form Ce2O3 adlayers stable against oxidation at 400 °C. As the thickness of CeOx adlayers increases, ceria adlayers with oxygen vacancies (CeO2-x) emerge and grow in the CeOx/Ag inverse catalysts, and the Ce3+/Ce4+ ratio decreases. Catalytic performance of CeOx/Ag inverse catalysts in the CO oxidation reaction is closely linked with the thickness and electronic structure of CeOx adlayers. These results demonstrate that the EOMSI and EOMI in the oxide/metal inverse catalysts are localized at the oxide-metal interface and sensitively vary with the thickness of oxide adlayers, offering a strategy of thickness engineering to tune electronic structures of oxide adlayers in oxide/metal inverse catalysts.

Ultrafast Laser 3D Nanolithography of Fiber-Integrated Silica Microdevices

Fiber-integrated micro/nanostructures play a crucial role in modern industry, mainly owing to their compact size, high sensitivity, and resistance to electromagnetic interference. However, the three-dimensional manufacturing of fiber-tip functional structures beyond organic polymers remains challenging. It is essential to construct fiber-integrated inorganic silica with designed functional nanostructures for microsystem applications. Here, we develop a strategy for the 3D nanolithography of fiber-integrated silica from hybrid organic-inorganic materials by ultrafast laser-induced multiphoton absorption. Without silica nanoparticles and polymer additives, the acrylate-functionalized precursors can be locally cross-linked through a nonlinear effect. Followed by annealing at low temperature, the as-printed micro/nanostructures are transformed to high-quality silica with sub-100 nm resolution. Silica microcantilever probes and microtoroid resonators are directly integrated onto the optical fiber, showing strong thermal stability and quality factors. This work provides a promising strategy for fabricating desired fiber-tip silica micro/nanostructures, which is helpful for the development of integrated functional device applications.

Thermal Shock Synthesis for Loading Sub-2 nm Ru Nanoclusters on Titanium Nitride as a Remarkable Electrocatalyst toward Hydrogen Evolution Reaction

Heterogeneous catalysts embracing metal entities on suitable supports are profound in catalyzing various chemical reactions, and substantial synthetic endeavors in metal-support interaction modulation are made to enhance catalytic performance. Here, it is reported the loading of sub-2 nm Ru nanocrystals (NCs) on titanium nitride support (HTS-Ru-NCs/TiN) via a special Ru-Ti interaction using the high-temperature shock (HTS) method. Direct dechlorination of the adsorbed RuCl3, ultrafast nucleation process, and short coalescence duration at ultrahigh temperatures contribute to the immobilization of Ru NCs on TiN support via producing the Ru-Ti interfacial perimeter. HTS-Ru-NCs/TiN shows remarkable activity toward hydrogen evolution reaction (HER) in alkaline solution, yielding ultralow overpotentials of 16.3 and 86.6 mV to achieve 10 and 100 mA cm-2, respectively. The alkaline and anion exchange membrane water electrolyzers assembled using HTS-Ru-NCs/TiN yield 1.0 A cm-2 at 1.65 and 1.67 V, respectively, which validate its applicability in the hydrogen production industry. Theoretical simulations reveal the favorable formation of Ru─O and Ti─H bonds at the interfacial perimeters between Ru NCs and TiN, which accelerates the prerequisite water dissociation kinetics for enhanced HER activity. This exemplified work motivates the design of specific interfacial perimeters via the HTS strategy to improve the performance of diverse catalysis.

Rationally designed Ru catalysts supported on TiN for highly efficient and stable hydrogen evolution in alkaline conditions

Electrocatalysis holds the key to enhancing the efficiency and cost-effectiveness of water splitting devices, thereby contributing to the advancement of hydrogen as a clean, sustainable energy carrier. This study focuses on the rational design of Ru nanoparticle catalysts supported on TiN (Ru NPs/TiN) for the hydrogen evolution reaction in alkaline conditions. The as designed catalysts exhibit a high mass activity of 20 A mg-1Ru at an overpotential of 63 mV and long-term stability, surpassing the present benchmarks for commercial electrolyzers. Structural analysis highlights the effective modification of the Ru nanoparticle properties by the TiN substrate, while density functional theory calculations indicate strong adhesion of Ru particles to TiN substrates and advantageous modulation of hydrogen adsorption energies via particle-support interactions. Finally, we assemble an anion exchange membrane electrolyzer using the Ru NPs/TiN as the hydrogen evolution reaction catalyst, which operates at 5 A cm-2 for more than 1000 h with negligible degradation, exceeding the performance requirements for commercial electrolyzers. Our findings contribute to the design of efficient catalysts for water splitting by exploiting particle-support interactions.

Pulsed laser induced plasma and thermal effects on molybdenum carbide for dry reforming of methane

Dry reforming of methane (DRM) is a highly endothermic process, with its development hindered by the harsh thermocatalytic conditions required. We propose an innovative DRM approach utilizing a 16 W pulsed laser in combination with a cost-effective Mo2C catalyst, enabling DRM under milder conditions. The pulsed laser serves a dual function by inducing localized high temperatures and generating *CH plasma on the Mo2C surface. This activates CH4 and CO2, significantly accelerating the DRM reaction. Notably, the laser directly generates *CH plasma from CH4 through thermionic emission and cascade ionization, bypassing the traditional step-by-step dehydrogenation process and eliminating the rate-limiting step of methane cracking. This method maintains a carbon-oxygen balanced environment, thus preventing the deactivation of the Mo2C catalyst due to CO2 oxidation. The laser-catalytic DRM achieves high yields of H2 (14300.8 mmol h-1 g-1) and CO (14949.9 mmol h-1 g-1) with satisfactory energy efficiency (0.98 mmol kJ-1), providing a promising alternative for high-energy-consuming catalytic systems.

Highly Active and Sintering-Resistant Pt Clusters Supported on FeOx-Hydroxyapatite Achieved by Tailoring Strong Metal-Support Interactions

The catalytic performance of supported metal catalysts is closely related to their structure. While Pt-based catalysts are widely used in many catalytic reactions because of their exceptional intrinsic activity, they tend to deactivate in high-temperature reactions, requiring a tedious and expensive regeneration process. The strong metal-support interaction (SMSI) is a promising strategy to improve the stability of supported metal nanoparticles, but often at the price of the activity due to either the coverage of the active sites by support overlay and/or the too-strong metal-support bonding. Herein, we newly constructed a supported Pt cluster catalyst by introducing FeOx into hydroxyapatite (HAP) support to fine-tune the SMSIs. The catalyst exhibited not only high catalytic activity but also sintering resistance, without deactivation in a 100 h test for catalytic CO oxidation. Detailed characterizations reveal that FeOx introduced into HAP weaken the strong covalent metal-support interaction (CMSI) between Pt and FeOx while simultaneously inhibiting the oxidative strong metal-support interaction (OMSI) between Pt and HAP, giving rise to both high activity and thermal stability of the supported Pt clusters.

Hydrogenated TiO2 Carbon Support for PtRu Anode Catalyst in High-Performance Anion-Exchange Membrane Fuel Cells

The availability of durable, high-performance electrocatalysts for the hydrogen oxidation reaction (HOR) is currently a constraint for anion-exchange membrane fuel cells (AEMFCs). Herein, a rapid microwave-assisted synthesis method is used to develop a core-shell catalyst support based on a hydrogenated TiO2/carbon for PtRu nanoparticles (NPs). The hydrogenated TiO2 provides a strong metal-support interaction with the PtRu NPs, which improves the catalyst's oxophilicity and HOR activity compared to commercial PtRu/C and enables greater size control of the catalyst NPs. The as-synthesized PtRu/TiO2/C-400 electrocatalyst exhibits respectable performance in an AEMFC operated at 80 °C, yielding the highest current density (up to 3× higher) within the catalytic region (compared at 0.80-0.90 V) and voltage efficiency (68%@ 0.5 A cm-2) values in the compared literature. In addition, the cell demonstrates promising short-term voltage stability with a minor voltage decay of 1.5 mV h-1. This "first-of-its-kind in alkaline" work may open further research avenues to develop rapid synthesis methods to prepare advanced core-shell metal-oxide/carbon supports for electrocatalysts for use in the next-generation of AEMFCs with potential applicability to the broader electrochemical systems research community.

CO-Assisted Methane Oxidation into Oxygenates over Surface Platinum-Titanium Alloyed Layers

Methane oxidation using molecular oxygen remains a grand challenge in which the obstacle is not only the activation of methane but also the reaction with oxygen, considering the mismatch of the ground spin states. Herein, we report TiO2-supported Pt nanocrystals (Pt/TiO2) with surface Pt-Ti alloyed layers that directly convert methane into oxygenates by using O2 as the oxidant with the assistance of CO. The oxygenate yield reached 749.8 mmol gPt-1 in a H2O aqueous solution over 0.1% Pt/TiO2 under 31 bar of mixed gas (20:5:6 CH4:CO:O2) at 150 °C for 3 h, while the CH3OH selectivity was 62.3%. On the basis of the control experiments and spectroscopic results, we identified the surface Pt-Ti alloy as the active sites. Moreover, CO promoted the dissociation of O2 on the surface of Pt-Ti alloyed layers and the subsequent activation of CH4 to form oxygenated products.

Emerging two dimensional metastable-phase oxides: insights and prospects in synthesis and catalysis

Since the discovery of graphene, the development of new two-dimensional (2D) materials has received considerable interest. Recently, as a newly emerging member of the 2D family, 2D metastable-phase oxides that combine the unique advantages of metal oxides, 2D structures, and metastable-phase materials have shown enormous potential in various catalytic reactions. In this review, the potential of various 2D materials to form a metastable-phase is predicted. The advantages of 2D metastable-phase oxides for advanced applications, reliable methods of synthesizing 2D metastable-phase oxides, and the application of these oxides in different catalytic reactions are presented. Finally, the challenges associated with 2D metastable-phase oxides and future perspectives are discussed.

Flexible Copper-Based Thermistors Fabricated by Laser Direct Writing for Low-Temperature Sensing

With the flexibilization tendency of traditional electronics, developing sensing devices for the low-temperature field is demanding. Here, we fabricated a flexible copper-based thermistor by a laser direct writing process with Cu ion precursors. The copper-based thermistor performs with excellent temperature sensing ability and high stability under different environments. We discussed the effect of laser power on the temperature sensitivity of the copper-based thermistor, explained the sensing mechanism of the as-written copper-based films, and fabricated a temperature sensor array for realizing temperature management in a specific zone. All of the investigations have demonstrated that such copper-based thermistors can be used as candidate devices for low-temperature sensing fields.

A porous micro/nano-structured polyethylene film prepared using a picosecond laser for agricultural passive cooling

Passive cooling materials, as a promising choice for mitigating the global energy crisis, have limited use as their cooling effects are usually weakened or lost by dust contamination. In this study, a passive cooling polyethylene (PE) film with self-cleaning properties is prepared by picosecond laser ablation. Numerous root-like hierarchical porous micro/nano-structures were obtained on the double side of the PE film. The outside (toward air) shows excellent self-cleaning, corrosion resistance, and anti-friction properties. The inside (towards crops) further reduced the transmittance and water vapor evaporation (keeping the soil moist). Compared with the pristine PE film, the transmittance of the as-prepared double-sided micro/nano-structured PE film decreased by about 40%. In addition, during the crop cultivation experiment, the temperature of the crop leaves was reduced by 2.7-7 °C and showed a higher plant height and greater leaf width under the cover of the laser-treated film. This demonstrates that the passive cooling PE film has an excellent temperature regulation ability and good practical application effects. This study proposes a simple strategy based on a picosecond laser for the preparation of passive cooling materials, which are beneficial for alleviating energy crises and promoting sustainable development.

Renaissance of Strong Metal-Support Interactions

Strong metal-support interactions (SMSIs) have emerged as a significant and cutting-edge area of research in heterogeneous catalysis. They play crucial roles in modifying the chemisorption properties, interfacial structure, and electronic characteristics of supported metals, thereby exerting a profound influence on the catalytic properties. This Perspective aims to provide a comprehensive summary of the latest advancements and insights into SMSIs, with a focus on state-of-the-art in situ/operando characterization techniques. This overview also identifies innovative designs and applications of new types of SMSI systems in catalytic chemistry and highlights their pivotal role in enhancing catalytic performance, selectivity, and stability in specific cases. Particularly notable is the discovery of SMSI between active metals and metal carbides, which opens up a new era in the field of SMSI. Additionally, the strong interactions between atomically dispersed metals and supports are discussed, with an emphasis on the electronic effects of the support. The chemical nature of SMSI and its underlying catalytic mechanisms are also elaborated upon. It is evident that SMSI modification has become a powerful tool for enhancing catalytic performance in various catalytic applications.

Active Property-Structure Integrated Reconfiguration of Individual Resonant Nanoparticles

Property-structure reconfigurable nanoparticles (NPs) provide additional flexibility for effectively and flexibly manipulating light at the nanoscale. This has facilitated the development of various multifunctional and high-performance nanophotonic devices. Resonant NPs based on dielectric active materials, especially phase change materials, are particularly promising for achieving reconfigurability. However, the on-demand control of the properties, especially the morphology, in individual dielectric resonant NP remains a significant challenge. In this study, we present an all-optical approach for one-step fabrication of Ge2Sb2Te5 (GST) hemispherical NPs, integrated active reversible phase-state switching, and morphology reshaping. Reversible optical switching is demonstrated, attributed to reversible phase-state changes, along with unidirectional modifications to their scattering intensity resulting from morphology reshaping. This novel technology allows the precise adjustment of each structural pixel without affecting the overall functionality of the switchable nanophotonic device. It is highly suitable for applications in single-pixel-addressable active optical devices, structural color displays, and information storage, among others.

Three-dimensional patterning of MoS2 with ultrafast laser

Transition metal chalcogenides, a special two-dimensional (2D) material emerged in recent years, possess unique optoelectronic properties and have been used to fabricate various optoelectronic devices. While it is essential to manufacture multifunctional devices with complex nanostructures for practical applications, 2D material devices present a tendency toward miniaturization. However, the controllable fabrication of complex nanostructures on 2D materials remains a challenge. Herein, we propose a method to create designed three-dimensional (3D) patterns on the MoS2 surface by modulating the interaction between an ultrafast laser and MoS2. Three different nanostructures, including flat, bulge, and craters, can be fabricated through laser-induced surface morphology transformation, which is related to thermal diffusion, oxidation, and ablation processes. The MoS2 field effect transistor is fabricated by ultrafast laser excitation which exhibits enhanced electrical properties. This study provides a promising strategy for 3D pattern fabrication, which is helpful for the development of multifunctional microdevices.

The strong metal-support interactions induced electrocatalytic three-electron oxygen reduction to hydroxyl radicals for water treatment

As a promising environmental remediation technology, the electro-Fenton (EF) process is mainly limited by the two rate-limiting steps, which are H2O2 generation and activation. The electrocatalytic three-electron oxygen reduction reaction (3e- ORR) can directly activate oxygen to hydroxyl radicals (•OH), which is expected to break through the rate-limiting steps of the EF process. However, limited success has been achieved in the design of 3e- ORR electrocatalysts. Herein, we propose Cu/CoSe2/C with the strong metal-support interactions to enhance the 3e- ORR process, exhibiting remarkable reactivity and stability for •OH generation. Both experiment and DFT calculation results reveal that CoSe2 is conducive to the generation of H2O2. Meanwhile, the metallic Cu can enhance the adsorption strength of *H2O2 intermediates and thus promotes the one-electron reduction to •OH. The Cu/CoSe2/C catalyst exhibits the electron-transfer number close to 3.0 during the ORR process, and exhibits the outstanding •OH generation performance, achieving a higher apparent rate constant (6.0 times faster) toward ciprofloxacin compared with its analogy without the SMSI effect. Our work represents that the SMSI effect endows Cu/CoSe2/C high activity and selectivity for •OH generation, providing a unique perspective for the design of a high-efficiency 3e- ORR catalyst.

Fluorescence enhancement of organic dyes by femtosecond laser-induced cavitation bubbles for crystal imaging

Fluorescence from organic dyes can be applied in many research fields such as imaging, bio-sensing and diagnosis. One shortcoming of fluorescence imaging is the limitation in emission intensity. Amplification of fluorescence signals can be achieved by the enhancement of localized electromagnetic fields. Metallic nanoparticles are widely applied to produce plasmon resonance, but they cause thermal damage to fragile bio-materials. In this study, we propose a method for nanoparticle-free fluorescence enhancement by ultrafast laser-induced cavitation bubbles in organic dye solutions. Fluorescence enhancement without the use of nanoparticles prevents potential hazards including thermal effects and biotoxicity. In order to achieve fluorescence enhancement in neat dye solution, cavitation bubbles were induced by focusing an 800 nm ultrafast laser beam. Another 400 nm laser beam was used to pump the gain medium. Fluorescence enhancement was observed in various dye solutions. The intensity and spectra of the fluorescence emission can be controlled by changing the power and focus of the excitation laser. According to time-resolved microscopy and simulation results, the cavity formed by the laser-induced bubbles results in the enhancement of the localized electromagnetic field and induces the amplification of the fluorescence signal. The bubble-enhanced fluorescence emission was used for imaging of protein crystals without causing thermal damage to the samples. This study provides an effective method for bio-compatible fluorescence enhancement and has application prospects in fields such as bio-imaging.

Ultrafast Laser Plasmonic Fabrication of Nanocrystals by Molecule Modulation for Photoresponse Multifunctional Structures

Nanotechnology has attracted wide research attention in constructing functional devices, including integrated circuits, transparent electrodes, and flexible actuators. Bottom-up fabrication is an important approach for functional structure manufacture, however, the controllable fabrication of complex architectures for practical applications has long been a challenge. Here, a novel strategy of laser plasmonic fabrication based on glue molecule modulation is proposed that can assemble metal nanocrystals into interconnected pattern networks. The plasmonic response of nanocrystals is adjustable with molecule modulation, which is a benefit for the effective formation of laser-induced localized oscillating electrons. The further decomposition of molecules and the movement of nanocrystal surface atoms can achieve the coalescence of assembled nanocrystals. It demonstrates that complex architectures can be controllably constructed by molecule level modulation. Through molecule-assisted laser plasmonic fabrication, the functional nanocrystals with enhanced photothermal capacity can be used for information encryption and soft machinery. This work expands the knowledge of bottom-up fabrication and provides a method for designing functional nanocrystals for a wide range of applications.

Nonclassical Strong Metal-Support Interactions for Enhanced Catalysis

Strong metal-support interaction (SMSI), which encompasses reversible encapsulation and de-encapsulation and modulation of surface adsorption properties, imposes great impacts on the performance of heterogeneous catalysts. Recent development of SMSI has surpassed the prototypical encapsulated Pt-TiO₂ catalyst, affording a series of conceptually novel and practically advantageous catalytic systems. Here we provide our perspective on recent progress in nonclassical SMSIs for enhanced catalysis. Unravelling the structural complexity of SMSI necessitates the combination of multiple characterization techniques at different scales. Synthesis strategies leveraging chemical, photonic, and mechanochemical driving forces further expand the definition and application scope of SMSI. Exquisite structure engineering permits elucidation of the interface, entropy, and size effect on the geometric and electronic characteristics. Materials innovation places the atomically thin two-dimensional materials at the forefront of interfacial active site control. A broader space is awaiting exploration, where exploitation of metal-support interactions brings compelling catalytic activity, selectivity, and stability.

A Machine Learning-Combined Flexible Sensor for Tactile Detection and Voice Recognition

Intelligent sensors have attracted substantial attention for various applications, including wearable electronics, artificial intelligence, healthcare monitoring, and human-machine interactions. However, there still remains a critical challenge in developing a multifunctional sensing system for complex signal detection and analysis in practical applications. Here, we develop a machine learning-combined flexible sensor for real-time tactile sensing and voice recognition through laser-induced graphitization. The intelligent sensor with a triboelectric layer can convert local pressure to an electrical signal through a contact electrification effect without external bias, which has a characteristic response behavior when exposed to various mechanical stimuli. With the special patterning design, a smart human-machine interaction controlling system composed of a digital arrayed touch panel is constructed to control electronic devices. Based on machine learning, the real-time monitoring and recognition of the changes of voice are achieved with high accuracy. The machine learning-empowered flexible sensor provides a promising platform for the development of flexible tactile sensing, real-time health detection, human-machine interaction, and intelligent wearable devices.

Oxide-Metal Interaction Probed by Scanning Tunneling Microscope Manipulation of Cr2O7 Clusters on Au(111)

Interfacial interaction plays a crucial rule in catalysis over supported catalysts, and the catalyst-support interaction needs to be explored at microscopic scale. Here, we use the scanning tunneling microscope (STM) tip to manipulate Cr₂O₇ dinuclear clusters on Au(111) and find that the Cr₂O₇-Au interaction can be weakened by an electric field in the STM junction, facilitating rotation and translation of the individual clusters at the imaging temperature (78 K). Surface alloying with Cu makes the manipulation of the Cr₂O₇ clusters hard due to the enhanced Cr₂O₇-substrate interaction. Density functional theory calculations reveal that barrier for translation of a Cr₂O₇ cluster on the surface can be increased by surface alloying, influencing the tip manipulation. Our study demonstrates that the oxide-metal interfacial interaction can be probed by STM tip manipulation of supported oxide clusters, which provides a new method to investigate the interfacial interaction.

Ultrafast materials synthesis and manufacturing techniques for emerging energy and environmental applications

Energy and environmental issues have attracted increasing attention globally, where sustainability and low-carbon emissions are seriously considered and widely accepted by government officials. In response to this situation, the development of renewable energy and environmental technologies is urgently needed to complement the usage of traditional fossil fuels. While a big part of advancement in these technologies relies on materials innovations, new materials discovery is limited by sluggish conventional materials synthesis methods, greatly hindering the advancement of related technologies. To address this issue, this review introduces and comprehensively summarizes emerging ultrafast materials synthesis methods that could synthesize materials in times as short as nanoseconds, significantly improving research efficiency. We discuss the unique advantages of these methods, followed by how they benefit individual applications for renewable energy and the environment. We also highlight the scalability of ultrafast manufacturing towards their potential industrial utilization. Finally, we provide our perspectives on challenges and opportunities for the future development of ultrafast synthesis and manufacturing technologies. We anticipate that fertile opportunities exist not only for energy and the environment but also for many other applications.

Engineering Heterogeneous Catalysis with Strong Metal-Support Interactions: Characterization, Theory and Manipulation

Strong metal-support interactions (SMSI) represent a classic yet fast-growing area in catalysis research. The SMSI phenomenon results in the encapsulation and stabilization of metal nanoparticles (NPs) with the support material that significantly impacts the catalytic performance through regulation of the interfacial interactions. Engineering SMSI provides a promising approach to steer catalytic performance in various chemical processes, which serves as an effective tool to tackle energy and environmental challenges. Our Minireview covers characterization, theory, catalytic activity, dependence on the catalytic structure and inducing environment of SMSI phenomena. By providing an overview and outlook on the cutting-edge techniques in this multidisciplinary research field, we not only want to provide insights into the further exploitation of SMSI in catalysis, but we also hope to inspire rational designs and characterization in the broad field of material science and physical chemistry.

Pd Nanoparticles Supported on N-Doped TiO2 Nanosheets: Crystal Facets, Defective Sites, and Metal-Support Interactions Boost Reforming of Formaldehyde Solution for Hydrogen Production

To produce H₂ from formaldehyde (HCHO), dehydrogenation offers an alternative approach to future hydrogen-based energy sources, but the unsatisfactory efficiency hinders its practical application. Here, ultrafine Pd nanoparticle (NP) decorated N-doped TiO₂ nanosheets exposed with (001) facet catalysts (denoted as Pd/TiO_2-x) have been prepared and exhibit superior H₂ production performance from alkaline HCHO aqueous solution. Under our current conditions, the Pd/TiO_2-x catalyst with a Pd loading of 1 wt % exhibits a H₂ production rate of 183.77 mL/min/g, which is 1.75 and 3.66 times that of Pd/TiO₂ and Pd NPs, respectively. Based on the results of Fourier transform infrared spectroscopy (FTIR), Raman, and liquid-phase electron paramagnetic resonance (EPR) spin-trapping experiments, the excellent H₂ generation of Pd/TiO_2-x can be attributed to the synergistic contribution among the reactive crystal facets, defective sites, and metal-support interactions in boosting the breakage of C-H bonds in HCHO, dissociation of H₂O, and ultimately the formation of H₂. This work is expected to provide a paradigm of an efficient catalyst to produce H₂ from HCHO/H₂O solution.

Electronic Metal-Support Interaction Triggering Interfacial Charge Polarization over CuPd/N-Doped-C Nanohybrids Drives Selectively Electrocatalytic Conversion of Nitrate to Ammonia

Selective electrocatalytic nitrate-to-ammonia conversion holds significant potential in treatment of nitrate wastewater and simultaneously produces high-value-added ammonia. However, today's development of nitrate-to-ammonia technology remains hindered by the lack of electrocatalysts with high activity and selectivity. In this work, metal-organic framework-derived CuPd bimetallic nanoparticles/nitrogen-doped carbon (CuPd/CN) hybrid nanoarrays for efficient ammonia electrosynthesis from nitrate are designed and synthesized. Systematic characterization reveals that the electronic metal-support interaction between the CuPd nanoparticles and N-doped nanocarbon matrix could trigger interfacial charge polarization over the CuPd/CN composite and make Cu sites electron deficient, which is conducive to the adsorption of nitrate ions. Moreover, the Pd atom sites separate by Cu atoms and could catalyze the dissociation of H₂ O molecules to form adsorbed H species, which evolves into hydrogen radicals and behaves as the dominant reactive species in accelerating nitrate-to-ammonia electrocatalysis. These advantages endow the CuPd/CN nanoarrays with high faradaic efficiency (96.16%), selectivity (92.08%) as well as excellent catalytic stability for electroreduction of nitrate to ammonia.

Highly stable Q-switched and mode-locked pulse generation from an all-PM figure-9 fiber laser

A highly stable figure-9 Yb-doped fiber laser with all polarization-maintaining (PM) double-cladding fiber is demonstrated. Through leveraging the saturable absorption effect of a nonlinear amplifying loop mirror, both the Q-switched and mode-locked operation are realized by adjusting the pump power. With increasing the pump power from the threshold to the maxima, the repetition rate of the Q-switched pulses is linearly increased from 14.9 kHz to 138.0 kHz with the pulse duration accordingly reduced from 3.9 µs to 970 ns. The corresponding maximum average power and pulse energy are respectively 2.34 W and 17 µJ, which are more than ten times larger than the common material-based Q-switched all-fiber lasers. In addition, in the process of increasing and decreasing the pump power, an optical bistability that manifested as a significant power jumping effect is observed, while its effect on the pulse repetition rate and duration is trivial. Whereas for the single pulse mode-locked operation, a maximum output power of 56.3 mW with a fundamental repetition rate of 12.5 MHz is realized, corresponding to a pulse energy of 4.5 nJ. To the best of our knowledge, it is much higher than the most of previous works concerning figure-9 all-PM-fiber lasers of which the emitted pulse energy is generally less than 1 nJ. After being compressed by a pair of diffraction grating, a minimum pulse width of 378 fs and a maximum peak power of 9.76 kW are respectively obtained. In addition, through characterizing the spectral and temporal properties of the laser source, the excellent stability of both the Q-switched and mode-locked operations is verified.

Engineering Noble Metal-like Bi onto Hierarchical SrWO4 for the Enhancement of Photocatalytic Activity

Solar-driven hydrogen production from water has attracted increasing attention due to sustainable H2 fuel generation with zero-emissions. However, the design of a photocatalyst without noble metals to enable efficient water splitting is still critical for practical applications. In this study, the hierarchical microspheres of SrWO4 assembled with well-defined metallic Bi nanoparticles were synthesized through mild hydrothermal aging. The resultant photocatalyst with optimum proportion exhibited the competitive performance of a high hydrogen-generation rate at 4.5 mmol·h−1·g−1, outperforming SrWO4 and Bi by factors of 2.0 and 2.4, respectively. Both the experimental characterization and active analysis revealed that the synergistic effect of noble metal-like behavior of Bi and their electron-sink capacity mainly contribute to boosting the overall photocatalytic efficiency. This work may provide advanced insights into the application of economical bismuth elements as co-catalysts, instead of noble metals, to improve photocatalytic efficiency in solar-fuel conversion and environmental remediation.

The preparation of ultrastable Al3+ doped CeO2 supported Au catalysts: Strong metal-support interaction for superior catalytic activity towards CO oxidation

The classical strong metal-support interaction (SMSI) plays a key role in improving thermal stability for supported Au catalysts. However, it always decreases the catalytic activity because of the encapsulation of Au species by support. Herein, we demonstrate that Al³⁺ is a functional additive which could effectively improve both catalytic activity and sintering resistant property for H₂ pretreated Al³⁺ doped CeO₂ supported Au (AuCeAl) catalyst at high temperature. The physical characterization and in-situ DRIFTS results provide insight that more oxygen vacancies generated by Al³⁺ doping could be as preferential adsorption sites for CO molecules when the encapsulation of Au species occurred, which is certificated by an accelerated formation of bicarbonate species. In the meantime, smaller Au nanoparticles with higher dispersion (2.8 nm, 85.63%) is achieved in AuCeAl catalysts, compared with that in CeO₂ supported Au (AuCe) catalysts (5.1 nm, 36.17%). Additionally, the as-prepared AuCeAl catalysts also have superior catalytic performance even after calcination at 800 °C in air.

Underfocus Laser Induced Ni Nanoparticles Embedded Metallic MoN Microrods as Patterned Electrode for Efficient Overall Water Splitting

Transition metal nitrides have shown large potential in industrial application for realization of the high active and large current density toward overall water splitting, a strategy to synthesize an inexpensive electrocatalyst consisting of Ni nanoparticles embedded metallic MoN microrods cultured on roughened nickel sheet (Ni/MoN/rNS) through underfocus laser heating on NiMoO₄ ·xH₂ O under NH₃ atmosphere is posited. The proposed laser preparation mechanism of infocus and underfocus modes confirms that the laser induced stress and local high temperature controllably and rapidly prepared the patterned Ni/MoN/rNS electrodes in large size. The designed Ni/MoN/rNS presents outstanding catalytic performance for hydrogen evolution reaction (HER) with a low overpotential of 67 mV to deliver a current density of 10 mA cm^-2 and for the oxygen evolution reaction (OER) with a small overpotential of 533 mV to deliver 200 mA cm^-2 . Density functional theory (DFT) calculations and Kelvin probe force microscopy (KPFM) further verify that the constructed interface of Ni/MoN with small hydrogen absorption Gibbs free energy (ΔG_H* ) (-0.19 eV) and similar electrical conductivity between Ni and metallic MoN, which can explain the high intrinsic catalytic activity of Ni/MoN. Further, the constructed two-electrode system (-) Ni/MoN/rNS||Ni/MoN/rNS (+) is employed in an industrial water-splitting electrolyzer (460 mA cm^-2 for 120 h), being superior to the performance of commercial nickel electrode.