Red edge effect and chromoselective photocatalysis with amorphous covalent triazine-based frameworks

Efficient integration of covalent triazine frameworks (CTFs) for augmented photocatalytic efficacy: A review of synthesis, strategies, and applications

Heterogeneous photocatalysis emerges as an exceptionally appealing technological avenue for the direct capture, conversion, and storage of renewable solar energy, facilitating the generation of sustainable and ecologically benign solar fuels and a spectrum of other pertinent applications. Heterogeneous nanocomposites, incorporating Covalent Triazine Frameworks (CTFs), exhibit a wide-ranging spectrum of light absorption, well-suited electronic band structures, rapid charge carrier mobility, ample resource availability, commendable chemical robustness, and straightforward synthetic routes. These attributes collectively position them as highly promising photocatalysts with applicability in diverse fields, including but not limited to the production of photocatalytic solar fuels and the decomposition of environmental contaminants. As the field of photocatalysis through the hybridization of CTFs undergoes rapid expansion, there is a pressing and substantive need for a systematic retrospective analysis and forward-looking evaluation to elucidate pathways for enhancing performance. This comprehensive review commences by directing attention to diverse synthetic methodologies for the creation of composite materials. And then it delves into a thorough exploration of strategies geared towards augmenting performance, encompassing the introduction of electron donor-acceptor (D-A) units, heteroatom doping, defect Engineering, architecture of Heterojunction and optimization of morphology. Following this, it systematically elucidates applications primarily centered around the efficient generation of photocatalytic hydrogen, reduction of carbon dioxide through photocatalysis, and the degradation of organic pollutants. Ultimately, the discourse turns towards unresolved challenges and the prospects for further advancement, offering valuable guidance for the potent harnessing of CTFs in high-efficiency photocatalytic processes.

Heterogeneous organophotocatalytic HBr oxidation coupled with oxygen reduction for boosting bromination of arenes

Developing mild photocatalytic bromination strategies using sustainable bromo source has been attracting intense interests, but there is still much room for improvement. Full utilization of redox centers of photocatalysts for efficient generation of Br+ species is the key. Herein we report heterogenous organophotocatalytic HBr oxidation coupled with oxygen reduction to furnish Br2 and H2O2 for effective bromination of arenes over Al2O3 supported perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA). Mechanism studies suggest that O-vacancy in Al2O3 can provide Lewis-acid-type anchoring sites for O2, enabling unexpected dual-electron transfer from anchored photoexcited PTCDA to chemically bound O2 to produce H2O2. The in-situ generated H2O2 and Br2 over redox centers work together to generate HBrO for bromination of arenes. This work provides new insights that heterogenization of organophotocatalysts can not only help to improve their stability and recyclability, but also endow them with the ability to trigger unusual reaction mode via cooperative catalysis with supports.

Mechanism insight into double S-scheme heterojunctions and atomic vacancies with tunable band structures for notably enhanced light-driven enrofloxacin decomposition

Building narrow band gap semiconductors and fast separation of photogenerated electron-hole (e--h+) structures are of great significance for photocatalytic process. In this contribution, the CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions with atomic vacancies tunable band gap (2.54 eV) have been designed and fabricated as a boost photocatalyst for enrofloxacin (ENR) photodegradation. Compared with the control samples, the experimental results indicate that the typical sample (CeO2-x/C3-yN4/Ce(CO3)(OH)-2) achieves the highest ENR photodegradation efficiency (93.6 %) in 240 min under a pH of 6, and the possible photodegradation pathways are also proposed. The superior performance is ascribed to the CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions for selective recombination of photogenerated electrons with weak-reduction ability in conduction band (CB) of CeO2-x, C3-yN4 and the photogenerated holes with weak-oxidation nature in valance band (VB) of C3-yN4, Ce(CO3)(OH), which increase the retention rate of photogenerated electrons in CB of Ce(CO3)(OH) and photogenerated holes in VB of CeO2-x to degrade ENR. This is the first systematic study of CeO2-x/C3-yN4/Ce(CO3)(OH) double S-scheme heterojunctions for ENR photodegradation.

2D Graphene Oxide Membrane Nanoreactors for Rapid Directional Flow Ring-Opening Reactions with Dominant Same-Configuration Products

Nanoconfinement within enzymes can increase reaction rate and improve selectivity under mild conditions. However, it remains a great challenge to achieve chemical reactions imitating enzymes with directional molecular motion, short reaction time, ≈100% conversion, and chiral conversion in artificial nanoconfined systems. Here, directional flow ring-opening reactions of styrene oxide and alcohols are demonstrated with ≈100% conversion in <120 s at 22 °C using graphene oxide membrane nanoreactors. Dominant products have the same configuration as chiral styrene oxide in confined reactions, which is dramatically opposed to bulk reactions. The unique chiral conversion mechanism is caused by spatial confinement, limiting the inversion of benzylic chiral carbon. Moreover, the enantiomeric excess of same-configuration products increased with higher alkyl charge in confined reactions. This work provides a new route to achieve rapid flow ring-opening reactions with specific chiral conversion within 2D nanoconfined channels, and insights into the impact of nanoconfinement on ring-opening reaction mechanisms.

Red Light-Blue Light Chromoselective C(sp2)-X Bond Activation by Organic Helicenium-Based Photocatalysis

Chromoselective bond activation has been achieved in organic helicenium (nPr-DMQA+)-based photoredox catalysis. Consequently, control over chromoselective C(sp2)-X bond activation in multihalogenated aromatics has been demonstrated. nPr-DMQA+ can only initiate the halogen atom transfer (XAT) pathway under red light irradiation to activate low-energy-accessible C(sp2)-I bonds. In contrast, blue light irradiation initiates consecutive photoinduced electron transfer (conPET) to activate more challenging C(sp2)-Br bonds. Comparative reaction outcomes have been demonstrated in the α-arylation of cyclic ketones with red and blue lights. Furthermore, red-light-mediated selective C(sp2)-I bonds have been activated in iodobromoarenes to keep the bromo functional handle untouched. Finally, the strength of the chromoselective catalysis has been highlighted with two-fold functionalization using both photo-to-transition metal and photo-to-photocatalyzed transformations.

Dual Regulation of Charge Separation and the Oxygen Reduction Pathway by Encapsulating Phosphotungstic Acid into the Cationic Covalent Organic Framework for Efficient Photocatalytic Hydrogen Peroxide Production

Previous research on covalent organic framework (COF)-based photocatalytic H2O2 synthesis from oxygen reduction focuses more on charge carrier separation but less on the electron utilization efficiency of O2. Herein, we put forward a facile approach to simultaneously promote charge separation and tailor the oxygen reduction pathway by introducing phosphotungstic acid (PTA) into the cationic COF skeleton. Experiments verified that PTA, as an electron transport medium, establishes a fast electron transfer channel from the COF semiconductor conductor band to the substrate O2; meanwhile, the reaction path is optimized by its catalytic cycle for preferable dioxygen capture and reduction in oxygen reduction reaction (ORR) kinetics. The existence of PTA promotes the rate and tendency of converting O2 into •O2- intermediates, which is conducive to boosting the photocatalytic activity and selectivity toward the sequential two-step single-electron ORR. As expected, compared to the pristine TTB-EB, the optimal PTA0.5@TTB-EB achieves a 2.2-fold improvement of visible-light-driven photocatalytic performance with a H2O2 production rate of 897.94 μmol·L-1·h-1 in pure water without using any sacrificial agents. In addition, owing to the robust electrostatic interaction and the confinement effect of porous TTB-EB channels, the PTA@TTB-EB composite possessed favorable stability.

Construction of II-type and Z-scheme binding structure in P-doped graphitic carbon nitride loaded with ZnO and ZnTCPP boosting photocatalytic hydrogen evolution

A ternary heterostructure (ZnPPO) was constructed by loading ZnO and tetrakis (4-carboxyphenyl) zinc porphyrin (ZnTCPP) with P-doped g-C3N4 (PCN). In contrast to binary heterostructures (PCN-ZnO, ZnTCPP-ZnO and ZnTCPP-PCN) and single components (PCN, ZnTCPP and ZnO), ZnPPO has superior photocatalytic activity for H2 generation from water splitting. It is revealed that a binding structure of Ⅱ-type and Z-scheme has been constructed in ZnPPO, which plays a vital role in transferring photo-excited charge carriers. The significant enhancement of photocatalytic activity in ZnPPO is attributed to the effective transfer of photo-generated electrons and holes between the components of the ternary heterostructure.

Research Progress in Donor-Acceptor Type Covalent Organic Frameworks

Covalent organic frameworks (COFs) are new organic porous materials constructed by covalent bonds, with the advantages of pre-designable topology, adjustable pore size, and abundant active sites. Many research studies have shown that COFs exhibit great potential in gas adsorption, molecular separation, catalysis, drug delivery, energy storage, etc. However, the electrons and holes of intrinsic COF are prone to compounding in transport, and the carrier lifetime is short. The donor-acceptor (D-A) type COFs, which are synthesized by introducing D and A units into the COFs backbone, combine separated electron and hole migration pathway, tunable band gap and optoelectronic properties of D-A type polymers with the unique advantages of COFs and have made great progress in related research in recent years. Here, the synthetic strategies of D-A type COFs are first outlined, including the rational design of linkages and D-A units as well as functionalization approaches. Then the applications of D-A type COFs in catalytic reactions, photothermal therapy, and electronic materials are systematically summarized. In the final section, the current challenges, and new directions for the development of D-A type COFs are presented.

Hexatopic Vertex-Directed Approach to Vinylene-Linked Covalent Organic Frameworks with Heteroporous Topologies

A D_3h-symmetric hexatopic monomer was first prepared by attaching the three-fold ditopic moiety 2,6-dimethylpyridine to the meta-positions of a phenyl ring. It was further condensed at its six pyridylmethyl carbons with linear ditopic aromatic dialdehydes, resulting in two vinylene-linked COFs with heteroporous topologies, as revealed by powder X-ray diffraction (PXRD), nitrogen sorption, and pore-size distribution analyses, as well as transmission electron microscopy (TEM) image. The linear- and cross-conjugations, respectively, arising from the 2,6-linked pyridines and meta-linked phenylenes in the hexatopic nodes rendered the resultant COFs with well-patterned π-delocalization, allowing for efficiently catalyzing the bromination of aromatic derivatives with the pore-size-dependent conversion yields and regioselectivity under the irradiation of green light.

Recent Advances in the Use of Covalent Organic Frameworks as Heterogenous Photocatalysts in Organic Synthesis

Organic photochemistry is intensely developed in the 1980s, in which the nature of excited electronic states and the energy and electron transfer processes are thoroughly studied and finally well-understood. This knowledge from molecular organic photochemistry can be transferred to the design of covalent organic frameworks (COFs) as active visible-light photocatalysts. COFs constitute a new class of crystalline porous materials with substantial application potentials. Featured with outstanding structural tunability, large porosity, high surface area, excellent stability, and unique photoelectronic properties, COFs are studied as potential candidates in various research areas (e.g., photocatalysis). This review aims to provide the state-of-the-art insights into the design of COF photocatalysts (pristine, functionalized, and hybrid COFs) for organic transformations. The catalytic reaction mechanism of COF-based photocatalysts and the influence of dimensionality and crystallinity on heterogenous photocatalysis performance are also discussed, followed by perspectives and prospects on the main challenges and opportunities in future research of COFs and COF-based photocatalysts.

The effect of N-vacancy on the photocatalytic activity of graphitic carbon nitride in the oxidative Mannich reaction

N-vacancy g-CN was used in Mannich oxidative reaction as a photocatalyst, having mid-gap states that enhance reaction kinetics. This facile photocatalyst enabled successful formation of challenging THIQ with EWG and chemo-selectivity on C–C bond.