Modulating inherent lewis acidity at the intergrowth interface of mortise-tenon zeolite catalyst

Temperature-Programmed Desorption of Single Zeolite Nanoparticles

Zeolites are essential solid acid catalysts in various chemical processes. Temperature-programmed desorption (TPD) is one of the most established techniques used to characterize the acidity of zeolites by measuring the desorption kinetics of probes from bulk samples. However, conventional TPD can hardly deliver the intrinsic acid properties of zeolites because the apparent desorption kinetics are inevitably mixed with mass transfer and thermal conduction due to the large sample amount (∼0.1 g). Herein, we developed an optical microscopy approach to measure the TPD spectra of single zeolite nanoparticles, termed oTPD, by in situ monitoring of the reduced scattering intensity of individuals as a result of the desorption of probe molecules during heating. A significantly reduced sample amount contributed to the oTPD spectrum, revealing an intrinsic desorption temperature of ∼300 °C lower than the apparent value and also a greatly narrowed peak width from ∼150 to ∼15 °C. Correlating oTPD and micro-Raman spectra of the very same individuals further uncovered a linear dependence between the acidity and the content of silicon islands. This study provided unprecedented capabilities for measuring the intrinsic acid properties and the desorption kinetics of single zeolite nanoparticles, with implications for better understanding the structure-acidity relationship and for designing better zeolite catalysts.

Loading Self-Assembly Siliceous Zeolites for Affordable Next-Generation Wearable Artificial Kidney Technology

The global demand for dialysis among patients with end-stage kidney disease has surpassed the capacity of public healthcare, a trend that has intensified. While wearable artificial kidney (WAK) technology is seen as a crucial solution to address this demand, there is an urgent need for both efficient and renewable toxin-adsorbent materials to overcome the long-standing technological challenges in terms of cost, device size, and sustainability. In this study, we employed screening experiments for adsorbent materials, multimodal characterization, and Monte Carlo adsorption simulations to identify a synthetic self-assembly silicalite-1 zeolite that exhibits highly ordered crystal arrays along the [010] face (b-axis) direction, demonstrating exceptional adsorption capabilities for small molecular toxins such as creatinine and urea associated with uremia. Moreover, this metal-free, cost-effective, easily synthesized, and highly efficient toxin adsorbent could be regenerated through calcination without compromising the performance. The simulated toxin adsorption experiments and comprehensive biocompatibility verification position it as an auxiliary adsorbent to reduce dialysate dosages in WAK devices as well as a potential adsorbent for small-molecule toxins in dialysis. This work is poised to propel the development of next-generation WAK devices by providing siliceous adsorbent solutions for small-molecule toxins.

Intergrowth MFI Zeolite with Inverse Al Zoning and Predominant Sinusoidal Channels for Highly Selective Production of Styrene

ZSM-5 zeolites with accessible micropore architecture and tunable acid-base sites are important shape-selective catalysts. However, the presence of exposed straight channels and the external acid-base sites of conventional ZSM-5 has a negative impact on shape selectivity. Herein, we report on the direct synthesis of an intergrowth ZSM-5 zeolite mimicking the mortise-tenon joints. It can be revealed by various methods that the mortise-tenon ZSM-5 shows an inverse Al gradient from the surface to the core of the zeolite. More importantly, the sinusoidal channels predominantly opened to their external surfaces are constructed. The shape-selective capability of the ZSM-5 zeolite has been fully exploited due to the intrinsic inert external surface and unique sinusoidal channel features, thereby resulting in high styrene selectivity (>90%) and good catalytic stability (>100 h) in the toluene side-chain alkylation reaction. In addition, in situ DRIFTS confirms that this intergrowth ZSM-5 contributes to the formation of more active intermediates of HCOO* and H3CO*, which is another reason responsible for the superior performance.

Electronic structure modulation of iron sites with fluorine coordination enables ultra-effective H2O2 activation

Electronic structure modulation of active sites is critical important in Fenton catalysis as it offers a promising strategy for boosting H2O2 activation. However, efficient generation of hydroxyl radicals (•OH) is often limited to the unoptimized coordination environment of active sites. Herein, we report the rational design and synthesis of iron oxyfluoride (FeOF), whose iron sites strongly coordinate with the most electronegative fluorine atoms in a characteristic moiety of F-(Fe(III)O3)-F, for effective H2O2 activation with potent •OH generation. Results demonstrate that the fluorine coordination plays a pivotal role in lowering the local electron density and optimizing the electronic structures of iron sites, thus facilitating the rate-limiting H2O2 adsorption and subsequent peroxyl bond cleavage reactions. Consequently, FeOF exhibits a significant and pH-adaptive •OH yield (~450 µM) with high selectivity, which is 1 ~ 3 orders of magnitude higher than the state-of-the-art iron-based catalysts, leading to excellent degradation activities against various organic pollutants at neutral condition. This work provides fundamental insights into the function of fluorine coordination in boosting Fenton catalysis at atomic level, which may inspire the design of efficient active sites for sustainable environmental remediation.

Shape-Selective Alkylation of Toluene with Ethanol over a Twin Intergrowth Structured ZSM-5: Modulation of Acidity and Diffusivity via Interface Engineering

ZSM-5 zeolites with modified acidity and diffusivity are employed as catalysts for the shape-selective alkylation of toluene with ethanol to para-ethyltoluene (p-ET). To avoid pore blocking and loss of active sites caused by traditional methods of enhancing para-selectivity using modifiers, here, we constructed twin intergrowth structured ZSM-5 (Z5-T), achieving modulation of the inherent acidity and diffusivity through interface engineering. The characterization results demonstrate that due to the intergrowth interface, the Z5-T catalyst forms more inherent Lewis acid sites and also renders more sinusoidal channels opened to the surface. Z5-T with an appropriate acidity and enhanced shape-selectivity inhibits side reactions such as isomerization and coke formation, demonstrating improved p-ET selectivity (>90%) and catalytic stability (>200 h) in the alkylation of toluene with ethanol.

Regulating Lewis Acidic Sites of 1T-2H MoS2 Catalysts for Solar-Driven Photothermal Catalytic H2 Production from Lignocellulosic Biomass

Solar-driven photothermal catalytic H2 production from lignocellulosic biomass was achieved by using 1T-2H MoS2 with tunable Lewis acidic sites as catalysts in an alkaline aqueous solution, in which the number of Lewis acidic sites derived from the exposed Mo edges of MoS2 was successfully regulated by both the formation of an edge-terminated 1T-2H phase structure and tunable layer number. Owing to the abundant Lewis acidic sites for the oxygenolysis of lignocellulosic biomass, the 1T-2H MoS2 catalyst shows high photothermal catalytic lignocellulosic biomass-to-H2 transformation performance in polar wood chips, bamboo, rice straw corncobs, and rice hull aqueous solutions, and the highest H2 generation rate and solar-to-H2 (STH) efficiency respectively achieves 3661 μmol·h-1·g-1 and 0.18% in the polar wood chip system under 300 W Xe lamp illumination. This study provides a sustainable and cost-effective method for the direct transformation of renewable lignocellulosic biomass to H2 fuel driven by solar energy.

Imaging of Single Molecular Behaviors Under Bifurcated Three-Centered Hydrogen Bonding

The mechanism for interaction and bonding of single guest molecules with active sites fundamentally determines the sorption and subsequent catalytic processes occurring in host zeolitic frameworks. However, no real-space studies on these significant issues have been reported thus far, since atomically visualizing guest molecules and recognizing single Al T-sites in zeolites remain challenging. Here, we atomically resolved single thiophene probes interacting with acid T-sites in the ZSM-5 framework to study the bonding behaviors between them. The synergy of bifurcated three-centered hydrogen bonds and van der Waals interactions can "freeze" the near-horizontal thiophene and make it stable enough to be imaged. By combining the imaging results with simulations, direct atomic observations enabled us to precisely locate the single Al T-sites in individual straight channels. Then, we statistically found that the thiophene bonding probability of the T11 site is 15 times higher than that of the T6 site. For different acid T-sites, the variation in the interaction synergy changes the inner angle of the host-guest O-H⋅⋅⋅S hydrogen bond, thereby affecting the stability of the near-horizontal thiophene and leading to considerable bonding inhomogeneities.

Intergrowth Zeolites, Synthesis, Characterization, and Catalysis

Microporous zeolites that can act as heterogeneous catalysts have continued to attract a great deal of academic and industrial interest, but current progress in their synthesis and application is restricted to single-phase zeolites, severely underestimating the potential of intergrowth frameworks. Compared with single-phase zeolites, intergrowth zeolites possess unique properties, such as different diffusion pathways and molecular confinement, or special crystalline pore environments for binding metal active sites. This review first focuses on the structural features and synthetic details of all the intergrowth zeolites, especially providing some insightful discussion of several potential frameworks. Subsequently, characterization methods for intergrowth zeolites are introduced, and highlighting fundamental features of these crystals. Then, the applications of intergrowth zeolites in several of the most active areas of catalysis are presented, including selective catalytic reduction of NOx by ammonia (NH3-SCR), methanol to olefins (MTO), petrochemicals and refining, fine chemicals production, and biomass conversion on Beta, and the relationship between structure and catalytic activity was profiled from the perspective of intergrowth grain boundary structure. Finally, the synthesis, characterization, and catalysis of intergrowth zeolites are summarized in a comprehensive discussion, and a brief outlook on the current challenges and future directions of intergrowth zeolites is indicated.