The coupling of the hydrated proton to its first solvation shell

The Determination of Free Energy of Hydration of Water Ions from First Principles

We model the autoionization of water by determining the free energy of hydration of the major intermediate species of water ions. We represent the smallest ions─the hydroxide ion OH-, the hydronium ion H3O+, and the Zundel ion H5O2+─by bonded models and the more extended ionic structures by strong nonbonded interactions (e.g., the Eigen H9O4+ = H3O+ + 3(H2O) and the Stoyanov H13O6+ = H5O2+ + 4(H2O)). Our models are faithful to the precise QM energies and their components to within 1% or less. Using the calculated free energies and atomization energies, we compute the pKa of pure water from first principles as a consistency check and arrive at a value within 1.3 log units of the experimental one. From these calculations, we conclude that the hydronium ion, and its hydrated state, the Eigen cation, are the dominant species in the water autoionization process.

Using a pruned basis and a sparse collocation grid with more points than basis functions to do efficient and accurate MCTDH calculations with general potential energy surfaces

We propose a new collocation multi-configuration time-dependent Hartree (MCTDH) method. It reduces point-set error by using more points than basis functions. Collocation makes it possible to use MCTDH with a general potential energy surface without computing any integrals. The collocation points are associated with a basis larger than the basis used to represent wavefunctions. Both bases are obtained from a direct product basis built from single-particle functions by imposing a pruning condition. The collocation points are those on a sparse grid. Heretofore, collocation MCTDH calculations with more points than basis functions have only been possible if both the collocation grid and the basis set are direct products. In this paper, we exploit a new pseudo-inverse to use both more points than basis functions and a pruned basis and grid. We demonstrate that, for a calculation of the lowest 50 vibrational states (energy levels and wavefunctions) of CH2NH, errors can be reduced by two orders of magnitude by increasing the number of points, without increasing the basis size. This is true also when unrefined time-independent points are used.

Encoding a Many-Body Potential Energy Surface into a Grid-Based Matrix Product Operator

An efficient algorithm for compressing a given many-body potential energy surface (PES) of molecular systems into a grid-based matrix product operator (MPO) is proposed. The PES is once represented by a full-dimensional or truncated many-body expansion form, which is obtained by ab initio calculations at each grid mesh point, and then all terms in the expansion are compressed and merged into a single MPO while maintaining the bond dimension of the MPO as small as possible. It was shown that the ab initio PES of the H2CO was compressed by more than 2 orders of magnitude in the size of the site operators without loss of accuracy. By the use of grid basis, the tensor rank of the site operators of the MPO is reduced from four to three due to the diagonal nature of the position-dependent operators on grid basis, which significantly reduces the computational cost of the tensor contractions required in the real and imaginary time evolution of the matrix product state (MPS) wave functions with the grid-based MPO (Grid-MPO) Hamiltonian. Similar to other grid-based methods, Grid-MPO is easily applicable to any kinds of potentials of molecular systems, such as analytical empirical model potentials expressed by position operators and ab initio potentials, if the values at the grid points are available. Using the Grid-MPO combined with the MPS, we calculated the time correlation function of the Eigen cation H 3 O + ( H 2 O ) 3 to predict the infrared spectrum and compared with the experimental and the previous theoretical studies. The actual scaling with the size of systems was examined for the multidimensional Henon-Heiles Hamiltonian. It was shown that the method is considerably accelerated by the graphic processing unit (GPU) because the sizes of site operators were kept small and all tensors were able to be stored on the VRAM of a GPU.

Fast Structural Dynamics in Concentrated HCl Solutions: From Proton Hopping to the Bulk Viscosity

Concentrated acid solutions, particularly HCl, have been studied extensively to examine the proton hopping and infrared spectral signatures of hydronium ions. Much less attention has been given to the structural dynamics of concentrated HCl solutions. Here, we apply optical heterodyne detected-optical Kerr effect (OHD-OKE) measurements to examine HCl concentration-dependent dynamics from moderate (0.8 m) to very high (15.5 m) concentrations and compare the results to the dynamics of NaCl solutions, as Na+ is similar in size to the hydronium cation. Both HCl and NaCl OHD-OKE signals decay as triexponentials at all concentrations, in contrast to pure water, which decays as a biexponential. Two remarkable features of the HCl dynamics are the following: (1) the bulk viscosity is linearly related to the slowest decay constant, t3, and (2) the concentration-dependent proton hopping times, determined by ab initio MD simulations and 2D IR chemical exchange experiments, both obtained from the literature, fall on the same line as the slowest structural dynamics relaxation time, t3, within experimental error. The structural dynamics of hydronium/chloride/water clusters, with relaxation times t3, are responsible for the concentration dependence of microscopic property of proton hopping and the macroscopic bulk viscosity. The slowest time constant (t3), which does not have a counterpart in pure water, is 3 ps at 0.8 m and increases by a factor of ∼2 by 15.5 m. The two fastest HCl decay constants, t1 and t2, are similar to those of pure water and increase mildly with the concentration.

Correlations between the Structures and Spectra of Protonated Water Clusters

Badger's rule-like correlations between OH stretching frequencies and intensities and the OH bond length are used to develop a spectral mapping procedure for studies of pure and protonated water clusters. This approach utilizes the vibrationally averaged OH bond lengths, which were obtained from diffusion Monte Carlo simulations that were performed using the general potential developed by Yu and Bowman. Good agreement is achieved between the spectra obtained using this approach and previously reported spectra for H+(H2O)n clusters, with n = 3, 4, and 5, as well as their perdeuterated analogues. The analysis of the spectra obtained by this spectral mapping approach supports previous work that assigned the spectrum of H+(H2O)6 to a mixture of Eigen and Zundel-like structures. Analysis of the calculated spectra also suggests a reassignment of the frequency of one of the transitions that involves the OH stretching vibration of the OH bonds in the hydronium core in the Eigen-like structure of H+(H2O)6 from 1917 cm-1 to roughly 2100 cm-1. For D+(D2O)6, comparison of the measured spectrum to those obtained by using the spectral mapping approach suggests that the carrier of the measured spectrum is one or more of the isomers of D+(D2O)6 that contain a four-membered ring and two flanking water molecules. While there are several candidate structures, the two flanking water molecules most likely form a chain that is bound to the hydronium core.

Eigenstate calculation in the state-averaged (multi-layer) multi-configurational time-dependent Hartree approach

A new approach for the calculation of eigenstates with the state-averaged (multi-layer) multi-configurational time-dependent Hartree (MCTDH) approach is presented. The approach is inspired by the recent work of Larsson [J. Chem. Phys. 151, 204102 (2019)]. It employs local optimization of the basis sets at each node of the multi-layer MCTDH tree and successive downward and upward sweeps to obtain a globally converged result. At the top node, the Hamiltonian represented in the basis of the single-particle functions (SPFs) of the first layer is diagonalized. Here p wavefunctions corresponding to the p lowest eigenvalues are computed by a block Lanczos approach. At all other nodes, a non-linear operator consisting of the respective mean-field Hamiltonian matrix and a projector onto the space spanned by the respective SPFs is considered. Here, the eigenstate corresponding to the lowest eigenvalue is computed using a short iterative Lanczos scheme. Two different examples are studied to illustrate the new approach: the calculation of the vibrational states of methyl and acetonitrile. The calculations for methyl employ the single-layer MCTDH approach, a general potential energy surface, and the correlation discrete variable representation. A five-layer MCTDH representation and a sum of product-type Hamiltonian are used in the acetonitrile calculations. Very fast convergence and order of magnitude reductions in the numerical effort compared to the previously used block relaxation scheme are found. Furthermore, a detailed comparison with the results of Avila and Carrington [J. Chem. Phys. 134, 054126 (2011)] for acetonitrile highlights the potential problems of convergence tests for high-dimensional systems.

Vibrational Spectra of Highly Anharmonic Water Clusters: Molecular Dynamics and Harmonic Analysis Revisited with Constrained Nuclear-Electronic Orbital Methods

Vibrational spectroscopy is widely used to gain insights into structural and dynamic properties of chemical, biological, and materials systems. Thus, an efficient and accurate method to simulate vibrational spectra is desired. In this paper, we justify and employ a microcanonical molecular simulation scheme to calculate the vibrational spectra of three challenging water clusters: the neutral water dimer (H4O2), the protonated water trimer (H7O3+), and the protonated water tetramer (H9O4+). We find that with the accurate description of quantum nuclear delocalization effects through the constrained nuclear-electronic orbital framework, including vibrational mode coupling effects through molecular dynamics simulations can additionally improve the vibrational spectrum calculations. In contrast, without the quantum nuclear delocalization picture, conventional ab initio molecular dynamics may even lead to less accurate results than harmonic analysis.

Pitfalls in the n-mode representation of vibrational potentials

Simulations of anharmonic vibrational motion rely on computationally expedient representations of the governing potential energy surface. The n-mode representation (n-MR)-effectively a many-body expansion in the space of molecular vibrations-is a general and efficient approach that is often used for this purpose in vibrational self-consistent field (VSCF) calculations and correlated analogues thereof. In the present analysis, a lack of convergence in many VSCF calculations is shown to originate from negative and unbound potentials at truncated orders of the n-MR expansion. For cases of strong anharmonic coupling between modes, the n-MR can both dip below the true global minimum of the potential surface and lead to effective single-mode potentials in VSCF that do not correspond to bound vibrational problems, even for bound total potentials. The present analysis serves mainly as a pathology report of this issue. Furthermore, this insight into the origin of VSCF non-convergence provides a simple, albeit ad hoc, route to correct the problem by "painting in" the full representation of groups of modes that exhibit these negative potentials at little additional computational cost. Somewhat surprisingly, this approach also reasonably approximates the results of the next-higher n-MR order and identifies groups of modes with particularly strong coupling. The method is shown to identify and correct problematic triples of modes-and restore SCF convergence-in two-mode representations of challenging test systems, including the water dimer and trimer, as well as protonated tropine.

Quantum and classical molecular dynamics for H atom scattering from graphene

This work presents systematic comparisons between classical molecular dynamics (cMD) and quantum dynamics (QD) simulations of 15-dimensional and 75-dimensional models in their description of H atom scattering from graphene. We use an experimentally validated full-dimensional neural network potential energy surface of a hydrogen atom interacting with a large cell of graphene containing 24 carbon atoms. For quantum dynamics simulations, we apply Monte Carlo canonical polyadic decomposition to transform the original potential energy surface (PES) into a sum of products form and use the multi-layer multi-configuration time-dependent Hartree method to simulate the quantum scattering of a hydrogen or deuterium atom with an initial kinetic energy of 1.96 or 0.96 eV and an incident angle of 0°, i.e., perpendicular to the graphene surface. The cMD and QD initial conditions have been carefully chosen in order to be as close as possible. Our results show little differences between cMD and QD simulations when the incident energy of the H atom is equal to 1.96 eV. However, a large difference in sticking probability is observed when the incident energy of the H atom is equal to 0.96 eV, indicating the predominance of quantum effects. To the best of our knowledge, our work provides the first benchmark of quantum against classical simulations for a system of this size with a realistic PES. Additionally, new projectors are implemented in the Heidelberg multi-configuration time-dependent Hartree package for the calculation of the atom scattering energy transfer distribution as a function of outgoing angles.

Multi-Time-Scale Simulation of Complex Reactive Mixtures: How Do Polyoxometalates Form?

Understanding the dynamics of reactive mixtures still challenges both experiments and theory. A relevant example can be found in the chemistry of molecular metal-oxide nanoclusters, also known as polyoxometalates. The high number of species potentially involved, the interconnectivity of the reaction network, and the precise control of the pH and concentrations needed in the synthesis of such species make the theoretical/computational treatment of such processes cumbersome. This work addresses this issue relying on a unique combination of recently developed computational methods that tackle the construction, kinetic simulation, and analysis of complex chemical reaction networks. By using the Bell-Evans-Polanyi approximation for estimating activation energies, and an accurate and robust linear scaling for correcting the computed pKa values, we report herein multi-time-scale kinetic simulations for the self-assembly processes of polyoxotungstates that comprise 22 orders of magnitude, from tens of femtoseconds to months of reaction time. This very large time span was required to reproduce very fast processes such as the acid/base equilibria (at 10-12 s), relatively slow reactions such as the formation of key clusters such as the metatungstate (at 103 s), and the very slow assembly of the decatungstate (at 106 s). Analysis of the kinetic data and of the reaction network topology shed light onto the details of the main reaction mechanisms, which explains the origin of kinetic and thermodynamic control followed by the reaction. Simulations at alkaline pH fully reproduce experimental evidence since clusters do not form under those conditions.

Accelerating Anharmonic Spectroscopy Simulations via Local-Mode, Multilevel Methods

Ab initio computer simulations of anharmonic vibrational spectra provide nuanced insight into the vibrational behavior of molecules and complexes. The computational bottleneck in such simulations, particularly for ab initio potentials, is often the generation of mode-coupling potentials. Focusing specifically on two-mode couplings in this analysis, the combination of a local-mode representation and multilevel methods is demonstrated to be particularly symbiotic. In this approach, a low-level quantum chemistry method is employed to predict the pairwise couplings that should be included at the target level of theory in vibrational self-consistent field (and similar) calculations. Pairs that are excluded by this approach are "recycled" at the low level of theory. Furthermore, because this low-level pre-screening will eventually become the computational bottleneck for sufficiently large chemical systems, distance-based truncation is applied to these low-level predictions without substantive loss of accuracy. This combination is demonstrated to yield sub-wavenumber fidelity with reference vibrational transitions when including only a small fraction of target-level couplings; the overhead of predicting these couplings, particularly when employing distance-based, local-mode cutoffs, is a trivial added cost. This combined approach is assessed on a series of test cases, including ethylene, hexatriene, and the alanine dipeptide. Vibrational self-consistent field (VSCF) spectra were obtained with an RI-MP2/cc-pVTZ potential for the dipeptide, at approximately a 5-fold reduction in computational cost. Considerable optimism for increased accelerations for larger systems and higher-order couplings is also justified, based on this investigation.

Calculating Vibrational Excited State Absorptions with Excited State Constrained Minimized Energy Surfaces

The modeling and interpretation of vibrational spectra are crucial for studying reaction dynamics using vibrational spectroscopy. Most prior theoretical developments focused on describing fundamental vibrational transitions while fewer developments focused on vibrational excited state absorptions. In this study, we present a new method that uses excited state constrained minimized energy surfaces (CMESs) to describe vibrational excited state absorptions. The excited state CMESs are obtained similarly to the previous ground state CMES development in our group but with additional wave function orthogonality constraints. Using a series of model systems, including the harmonic oscillator, Morse potential, double-well potential, quartic potential, and two-dimensional anharmonic potential, we demonstrate that this new procedure provides good estimations of the transition frequencies for vibrational excited state absorptions. These results are significantly better than those obtained from harmonic approximations using conventional potential energy surfaces, demonstrating the promise of excited state CMES-based methods for calculating vibrational excited state absorptions in real systems.