Recent practical researches in the development of gluten-free breads

Rice-Based Gluten-Free Foods and Technologies: A Review

Rice, one of the most widely consumed staples worldwide, serves as a versatile gluten-free substitute. However, review articles on technological developments in grain-free production focusing on rice are scarce. This review assesses various research results concerning the quality attributes of rice-based gluten-free foods, including bread, pasta, and beer. To optimize the key attributes in processed products, such as dough leavening in bread and the physical and cooking properties of noodles and pasta, research has focused on blending different gluten-free grains and incorporating additives that mimic the gluten function. Additionally, various processing technologies, such as starch preprocessing and extrusion puffing processes, have been employed to boost the quality of rice-based gluten-free products. Today, a variety of products, including bread, noodles, and beer, use rice as a partial replacement for barley or wheat. With rapid advancements in technology, a noticeable portion of consumers now shows a preference for products containing rice as a substitute. This trend indicates that rice-based gluten-free foods can be enhanced by leveraging the latest developments in gluten-free product technologies, particularly in countries where rice is a staple or is predominantly cultivated.

Effects of White Sorghum Flour Levels on Physicochemical and Sensory Characteristics of Gluten-Free Bread

This research studied the effects of white sorghum flour levels at 0, 10, 25, 40, 70, 85 and 100% in the matrix of rice and tapioca flours and corn starch on the properties of flour blends and the qualities of gluten-free (GF) bread. Single and composite flours were analyzed for moisture content, color and pasting properties. GF bread samples prepared from composite flours were analyzed for specific volume, moisture content, water activity, crumb color and instrumental texture. Sensory profiles of the breads were determined by nine trained descriptive panelists. The results show that increasing the sorghum flour content increased (p ≤ 0.05) color intensity, pasting temperature and setback viscosity, while it decreased (p ≤ 0.05) the peak and breakdown viscosities of flour blends. For GF bread, increasing white sorghum flour levels in the blends primarily affected specific volume, color, flavor and texture characteristics, leading to decreases (p ≤ 0.05) in specific volume, cohesiveness, springiness, chewiness and moistness, but increases (p ≤ 0.05) in color intensity, brown and nutty flavors, graininess and roughness. White sorghum flour could be used in the blends at the maximum level of 25% to get a good bread volume without sacrificing texture quality.

The Gliadin Hydrolysis Capacity of B. longum, L. acidophilus, and L. plantarum and Their Protective Effects on Caco-2 Cells against Gliadin-Induced Inflammatory Responses

BACKGROUND

Non-celiac wheat sensitivity (NCWS) is a poorly understood gluten-related disorder (GRD) and its prominent symptoms can be ameliorated by gluten avoidance. This study aimed to determine the effectiveness of a probiotic mixture in hydrolyzing gliadin peptides (toxic components of gluten) and suppressing gliadin-induced inflammatory responses in Caco-2 cells.

METHODS

Wheat dough was fermented with a probiotic mix for 0, 2, 4, and 6 h. The effect of the probiotic mix on gliadin degradation was monitored by SDS-PAGE. The expression levels of IL-6, IL-17A, INF-γ, IL-10, and TGF-β were evaluated using ELISA and qRT-PCR methods.

RESULTS

According to our findings, fermenting wheat dough with a mix of B. longum, L. acidophilus, and L. plantarum for 6 h was effective in gliadin degradation. This process also reduced levels of IL-6 (p = 0.004), IL-17A (p = 0.004), and IFN-γ (p = 0.01) mRNA, as well as decreased IL-6 (p = 0.006) and IFN-γ (p = 0.0009) protein secretion. 4 h fermentation led to a significant decrease in IL-17A (p = 0.001) and IFN-γ (p = 0.003) mRNA, as well as reduced levels of IL-6 (p = 0.002) and IFN-γ (p < 0.0001) protein secretion. This process was also observed to increase the expression levels of IL-10 (p < 0.0001) and TGF-β (p < 0.0001) mRNA.

CONCLUSIONS

4 h fermentation of wheat flour with the proposed probiotic mix might be a good strategy to develop an affordable gluten-free wheat dough for NCWS and probably other GRD patients.

The development process of plant-based meat alternatives: raw material formulations and processing strategies

With the rapid growth of the world's population, the demand for meat is gradually increasing. The emergence and development of plant-based meat alternatives (PBMs) offer a good alternative to solve the environmental problems and disease problems caused by the over-consumption of meat products. Soybean is now the primary material for the production of PBMs due to its excellent gelation properties, potential from fibrous structure, balanced nutritional value, and relatively low price. Extrusion is the most widely used process for producing PBMs, and it has a remarkable effect on simulating the fibrous structure of real meat products. However, interactions related to phase transitions in protein molecules or fibrous structures during extrusion remain a challenge. Currently, PBMs do not meet people's demand for realistic meat in terms of texture, taste, and flavor. Therefore, the objectives of this review are to explore how to improve fiber structure formation in terms of raw material formulation and processing technology. Factors to improve the taste and texture of PBMs are summarized in terms of optimizing process parameters, changing the composition of raw materials, and enriching taste and flavor. It will provide a theoretical basis for the future development of PBMs.

Textural characteristics and color analyses of 3D printed gluten-free pizza dough and crust

A new methodology was developed to print pizza dough with a gluten free flour blend or commercial gluten whole wheat flour using extrusion-based 3-D printing technology. Their physical properties were compared to commercially available pizza dough and crust. The optimized nozzle size, print speed, ingredient flow speed, and line thickness for the 3-D printing of pizza dough were: 0.04 cm, 800 cm/minutes, 1.8, and 0.34 cm, respectively. The printed gluten-free pizza dough required 120 min of fermentation to obtain a comparable color and textural profile (P < 0.05) to that of the gluten whole wheat flour dough fermented for 60 min. The 3-D printed gluten free, whole-wheat pizza and commercially available wheat flour dough and standard crusts demonstrated identical Δ E ab ∗ values of 0.14 and 0.13, respectively with brownness index (BI) values of 1.47 and 1.62, respectively. Textural profile analysis (TPA) of 3-D printed gluten free and whole wheat pizza dough, crust and the commercial standard wheat flour pizza dough and crust demonstrated significant (P < 0.05) correlations in terms of hardness, fracturability, adhesiveness, springiness, cohesiveness, chewiness, and resilience. An optimized method was developed to prepare gluten-free pizza dough and crust with similar functional properties to that of gluten whole wheat flour dough and crust.

Technological interventions in improving the functionality of proteins during processing of meat analogs

Meat analogs have opened a new horizon of opportunities for developing a sustainable alternative for meat and meat products. Proteins are an integral part of meat analogs and their functionalities have been extensively studied to mimic meat-like appearance and texture. Proteins have a vital role in imparting texture, nutritive value, and organoleptic attributes to meat analogs. Processing of suitable proteins from vegetable, mycoproteins, algal, and single-cell protein sources remains a challenge and several technological interventions ranging from the isolation of proteins to the processing of products are required. The present paper reviews and discusses in detail various proteins (soy proteins, wheat gluten, zein, algal proteins, mycoproteins, pulses, potato, oilseeds, pseudo-cereals, and grass) and their suitability for meat analog production. The review also discusses other associated aspects such as processing interventions that can be adapted to improve the functional and textural attributes of proteins in the processing of meat analogs (extrusion, spinning, Couette shear cell, additive manufacturing/3D printing, and freeze structuring). '.

Quality of Low-Allergy Wheat ('O-Free') Flour and Optimization of Its Bread-Baking Performance

This study explored the quality of hypoallergenic wheat ('O-free') developed in Korea and optimized the basic ingredients and processing conditions for making 'O-free' bread using response surface methodology. Water and yeast amounts and mixing and fermentation times were selected as factors, and each factor's tested range was set by a central composite design using Design Experts: water 52-60 g, yeast 1.5-4.5 g, mixing time 2.5-5 min, and fermentation time 50-70 min. Bread height, volume, and firmness were analyzed to determine bread quality. Flour quality analysis showed that 'O-free' flour's gluten strength was weak. 'O-free' flour exhibited inferior bread-making performance compared to representative bread flour. Water and yeast amounts and mixing time, except for fermentation time, affected bread quality significantly. The interaction between yeast and fermentation also affected bread quality significantly. The optimized condition for making bread using 'O-free' flour is 60 g of water, 2.6 g of yeast, 2.5 min of mixing time, and 70.0 min of fermentation time. In conclusion, 'O-free' flour with the changed gluten composition showed poor gluten strength and bread-making performance. However, modifying the formulation of the basic ingredients and processing conditions could significantly improve the production of high-quality hypoallergenic bread.

Effective Use of Plant Proteins for the Development of "New" Foods

Diversity in our diet mirrors modern society. Affluent lifestyles and extended longevity have caused the prevalence of diabetes and sarcopenia, which has led to the increased demand of low-carb, high-protein foods. Expansion of the global population and Westernization of Asian diets have surged the number of meat eaters, which has eventually disrupted the supply–demand balance of meat. In contrast, some people do not eat meat for religious reasons or due to veganism. With these multiple circumstances, our society has begun to resort to obtaining protein from plant sources rather than animal origins. This “protein shift” urges food researchers to develop high-quality foods based on plant proteins. Meanwhile, patients with food allergies, especially gluten-related ones, are reported to be increasing. Additionally, growing popularity of the gluten-free diet demands development of foods without using ingredients of wheat origin. Besides, consumers prefer “clean-label” products in which products are expected to contain fewer artificial compounds. These diversified demands on foods have spurred the development of “new” foods in view of food-processing technologies as well as selection of the primary ingredients. In this short review, examples of foodstuffs that have achieved tremendous recent progress are introduced: effective use of plant protein realized low-carb, high protein, gluten-free bread/pasta. Basic manufacturing principles of plant-based vegan cheese have also been established. We will also discuss on the strategy of effective development of new foods in view of the better communication with consumers as well as efficient use of plant proteins.

Study on the Introduction of Solid Fat with a High Content of Unsaturated Fatty Acids to Gluten-Free Muffins as a Basis for Designing Food with Higher Health Value

BACKGROUND

Shortenings are high in undesirable nutritionally saturated fatty acids. The aim of the study was to produce gluten-free muffins (GFM) of increased health quality and available to people intolerant to gluten, in which the shortenings were replaced with solid oleogels, consisting of 95% rapeseed oil.

METHODS

The dough and baked products were subjected to physical, textural, and structural analyses. Moreover, the fatty acids composition, chemical quality of fats extracted from muffins, and color of the products were determined. The dough was also observed at 600× magnification in bright field and polarized light microscopy, and microtomographic analysis of the structure of GTM was performed.

RESULTS

There was no effect of the type of lipids on physical properties, including water content in gluten-free muffins. However, the baked products differed in total porosity and brightness, as well as intensity of red and yellow colors. The use of rapeseed oil oleogels, instead of shortening in the muffin recipe, resulted in a decrease in the dietary undesirable SFA in lipid fractions (by approximately 40%), an increase in the content of MUFA (by approximately 30%), and an increase in the content of PUFA (by approximately 15%), with acceptable chemical quality.

CONCLUSIONS

Research confirms the possibility of obtaining products with increased nutritional value available to consumers on a gluten-free diet.

Functionality of Ingredients and Additives in Plant-Based Meat Analogues

Meat analogue research and development focuses on the production of sustainable products that recreate conventional meat in its physical sensations (texture, appearance, taste, etc.) and nutritional aspects. Minced products, like burger patties and nuggets, muscle-type products, like chicken or steak-like cuts, and emulsion products, like Frankfurter and Mortadella type sausages, are the major categories of meat analogues. In this review, we discuss key ingredients for the production of these novel products, with special focus on protein sources, and underline the importance of ingredient functionality. Our observation is that structuring processes are optimized based on ingredients that were not originally designed for meat analogues applications. Therefore, mixing and blending different plant materials to obtain superior functionality is for now the common practice. We observed though that an alternative approach towards the use of ingredients such as flours, is gaining more interest. The emphasis, in this case, is on functionality towards use in meat analogues, rather than classical functionality such as purity and solubility. Another trend is the exploration of novel protein sources such as seaweed, algae and proteins produced via fermentation (cellular agriculture).

Impact of ultrasonic treatment on rice starch and grain functional properties: A review

As a green, nonthermal, and innovative technology, ultrasonication generates acoustic cavitation in an aqueous medium, developing physical forces that affect the starch chemistry and rice grain characteristics. This review describes the current information on the effect of ultrasonication on the morphological, textural, and physicochemical properties of rice starch and grain. In a biphasic system, ultrasonication introduced fissures and cracks, which facilitated higher uptake of water and altered the rice starch characteristics impacting textural properties. In wholegrain rice, ultrasonic treatment stimulated the production of health-related metabolites, facilitated the higher uptake of micronutrient fortificants, and enhanced the palatability by softening the rice texture. This review provides insights into the future direction on the utilization of ultrasonication for the applications towards the improvement of rice functional properties.

Methods for the Modification and Evaluation of Cereal Proteins for the Substitution of Wheat Gluten in Dough Systems

The substitution of wheat gluten in the food industry is a relevant research area because the only known treatment for celiac disease is abstinence from this protein complex. The use of gluten-free cereals in dough systems has demonstrated that the viscoelastic properties of gluten cannot be achieved without the modification of the protein fraction. The quality of the final product is determined by the ability of the modification to form a matrix similar to that of gluten and to reach this, different methods have been proposed and tested. These procedures can be classified into four main types: chemical, enzymatic, physical, and genetic. This article provides a comprehensive review of the most recent research done in protein modification of cereal and pseudocereals for gluten substitution. The reported effects and methodologies for studying the changes made with each type of modification are described; also, some opportunity areas for future works regarding the study of the effect of protein modifications on gluten-free products are presented.

Development of “New” Bread and Cheese

Bread and cheese have been a popular combination since early times. Indeed, the history of bread dates back to 8000 BC and that of cheese to 7200 BC. However, new types of breads and cheeses are increasingly popular for several reasons, such as allergies, lifestyles, economy and religion. The major challenge is that food manufacturers are offering new products most of which are not welcomed by consumers. Therefore, recently, researchers have placed importance on their relationships with consumers to boost the success of new products. This short review summarizes the backgrounds of recent trends, processes, and principles to manufacture new bread and cheese products, and discusses future perspectives. The development of additive-free, gluten-free rice bread we have recently done from basic research to commercialization of the products is highly focused in this review. Additionally, ongoing studies on plant-based cheeses are introduced from material selection to suggest future outlooks.

Addition of Broad Bean Hull to Wheat Flour for the Development of High-Fiber Bread: Effects on Physical and Nutritional Properties

The seed coat (hull) of broad bean (Vicia faba) (BBH) is a significant secondary product of processing with a promising nutritional profile. Bean hull has a high fiber content (49%), yet it remains underexploited as an ingredient by the food industry. This study investigated the potential of this secondary product to partially replace wheat flour for the development of high-fiber breads. Bread formulations with a range of supplementation levels (0%, 11%, 21% and 31%) were developed and tested for their nutritional and physical properties. The proximate composition of breads revealed that at 31% replacement, the fiber content was 19.19 g/100 g bread, which was significantly higher (p < 0.05) than control breads (3.62 g/100 g bread). The physical (specific volume, density and color) and textural properties of breads were affected by the addition of bean hull. Specific volume and hardness of breads were significantly reduced at ≥21% replacement compared to the control, which may reduce acceptability of the product by some consumer groups. Enzyme-linked immunosorbent assay (ELISA) showed that the gluten content of breads was significantly reduced with bean hull addition (62% depletion for 31% replacement). At 11%, 21% and 31% replacement, one portion (80 g of bread) contains 6.8 g, 11.6 g and 15.3 g of dietary fiber, respectively, which contributes 23%, 38% and 51% of the recommended daily fiber intake (30 g/day). In conclusion, bean hull can be a valuable source of dietary fiber in bread formulations. The study showed BBH could be used to replace up to 21% of the wheat flour without significantly impacting on bread texture and volume.

Ferreira R, Raymundo A. Lupin Seed Protein Extract Can Efficiently Enrich the Physical Properties of Cookies Prepared with Alternative Flours

Legume proteins can be successfully used in bakery foods, like cookies, to obtain a protein-enriched product. A lupin extract (10 g/100 g) was added to gluten and gluten-free flours from different sources: rice, buckwheat, oat, kamut and spelt. The impact on the physical properties of the dough and cookies was evaluated for the different systems. Rice and buckwheat doughs were 20% firmer and 40% less cohesive than the others. The incorporation of lupin extract had a reduced impact on the shape parameters of the cookies, namely in terms of area and thickness. The texture differed over time and after eight weeks, the oat and buckwheat cookies enriched with lupin extract were significantly firmer than the cookies without lupin. The incorporation of lupin extract induced a certain golden-brown coloring on the cookies, making them more appealing: lightness (L*) values decreased, generally, for the cookies with lupin extract when compared to the controls. The aw and moisture content values were very low for all samples, suggesting a high stability food product. Hence, the addition of lupin extract brought some technological changes in the dough and cookies in all the flours tested but improved the final product quality which aligns with the trends in the food industry.

Fortification of traditional egg pasta (erişte) with edible insects: nutritional quality, cooking properties and sensory characteristics evaluation

Proximate composition, cooking quality and sensory characteristics of traditional Turkish egg pasta, erişte, fortified with edible insect and legume flours were evaluated. Egg pasta samples were produced using different blends of wheat flour: legume (lentil and white kidney bean) flour and wheat flour: edible insect (mealworm and grasshopper) flour. Optimum cooking time significantly (p < 0.05) increased with the fortification of egg pasta. The fortification of egg pasta with edible insect flours resulted in a reduced volume expansion from 236.7% (control) to 215.6% and 196.9% for grasshopper flour (W:G) and mealworm flour (W:M) samples, respectively. On the other hand, W:M and W:G samples exhibited significantly (p < 0.05) higher nutritional profile in terms of protein, ash and crude fiber content. Results showed that the smoothness of pasta was also influenced; strengthened by addition of white kidney bean flour and weakened by the addition of grasshopper flour. The received scores from sensory evaluation showed that flours including lentil flour (W:L) and white kidney bean flour (W:B) samples had higher flavor and overall acceptability values with compared to the mealworm flour (W:M), grasshopper flour (W:G) and control sample (C).

In vitro selection of anti-gliadin single-domain antibodies from a naïve library for cDNA-display mediated immuno-PCR

Gluten intolerance, or adverse intestinal reactions to gluten, is a fairly common problem among certain groups of people. Celiac disease is the most severe form of gluten intolerance, which can lead to permanent damage in the digestive system. Since lifelong avoidance of gluten is the only available treatment, development of reliable techniques to identify gluten contamination in food is important. Gliadin, a component of gluten, is known to play a major role in gluten toxicity. In this study, cDNA display method was used to select specific single-domain antibodies against toxic gliadin from an alpaca-derived naïve VHH library. The cDNA display method is a promising in vitro display technique, which uniquely converts an unstable mRNA-protein fusion molecule to a stable mRNA/cDNA-protein fusion molecule using a well-designed puromycin linker. Three candidate VHHs were selected and the affinities of the VHHs were observed by pulldown assay and indirect ELISA method. In addition, a novel cDNA display mediated immuno-PCR method (cD-IPCR) was successfully applied to detect gliadin in food. We believe this work demonstrates the potential application of the cDNA display method in selecting binders against toxic and heterogeneous targets such as gliadin with an immunization-free preparation manner.