Side-stream products of malting: a neglected source of phytochemicals

Barley-derived beer brewing by-products contain a high diversity of hydroxycinnamoylagmatines and their dimers

To aid valorisation of beer brewing by-products, more insight into their composition is essential. We have analysed the phenolic compound composition of four brewing by-products, namely barley rootlets, spent grain, hot trub, and cold trub. The main phenolics detected were hydroxycinnamoylagmatines and dimers thereof. Barley rootlets contained the highest hydroxycinnamoylagmatine content and cold trub the highest dimer content. Additionally, variations in (dimeric) hydroxycinnamoylagmatine composition and content were observed in fourteen barley rootlet samples. The most abundant compound in all rootlets was the glycosylated 4-O-7'/3-8'-linked heterodimer of coumaroylagmatine and feruloylagmatine, i.e. CouAgm-4-O-7'/3-8'-(4'Hex)-DFerAgm. Structures of glycosylated and hydroxylated derivatives of coumaroylagmatine were elucidated by NMR spectroscopy after their purification from a rootlet extract. An MS-based decision tree was developed, which aids in identifying hydroxycinnamoylagmatine dimers in complex mixtures. In conclusion, this study shows that the diversity of phenolamides and (neo)lignanamides in barley-derived by-products is larger than previously reported.

Exploring the formation of heterodimers of barley hydroxycinnamoylagmatines by oxidative enzymes

Dimers of hydroxycinnamoylagmatines are phenolic compounds found in barley and beer. Although they are bioactive and sensory-active compounds, systematic reports on their structure-property relationships are missing. This is partly due to lack of protocols to obtain a diverse set of hydroxycinnamoylagmatine homo- and heterodimers. To better understand dimer formation in complex systems, combinations of the monomers coumaroylagmatine (CouAgm), feruloylagmatine (FerAgm), and sinapoylagmatine (SinAgm) were incubated with horseradish peroxidase. For all combinations, the main oxidative coupling products were homodimers. Additionally, minor amounts of heterodimers were formed, except for the combination of FerAgm and CouAgm. Oxidative coupling was also performed with laccases from Agaricus bisporus and Trametes versicolor, resulting in formation of the same coupling products and no formation of CouAgm-FerAgm heterodimers. Our protocol for oxidative coupling combinations of hydroxycinnamoylagmatines yielded a structurally diverse set of coupling products, facilitating production of dimers for future research on their structure-property relationships.

Association of dietary intake of polyphenols, lignans, and phytosterols with immune-stimulating microbiota and COVID-19 risk in a group of Polish men and women

Objectives

Devastating consequences of COVID-19 disease enhanced the role of promoting prevention-focused practices. Among targeted efforts, diet is regarded as one of the potential factors which can affect immune function and optimal nutrition is postulated as the method of augmentation of people's viral resistance. As epidemiological evidence is scarce, the present study aimed to explore the association between dietary intake of total polyphenols, lignans and plant sterols and the abundance of immunomodulatory gut microbiota such as Enterococcus spp. and Escherichia coli and the risk of developing COVID-19 disease.

Methods

Demographic data, dietary habits, physical activity as well as the composition of body and gut microbiota were analyzed in a sample of 95 young healthy individuals. Dietary polyphenol, lignan and plant sterol intakes have been retrieved based on the amount of food consumed by the participants, the phytochemical content was assessed in laboratory analysis and using available databases.

Results

For all investigated polyphenols and phytosterols, except campesterol, every unit increase in the tertile of intake category was associated with a decrease in the odds of contracting COVID-19. The risk reduction ranged from several dozen percent to 70 %, depending on the individual plant-based chemical, and after controlling for basic covariates it was statistically significant for secoisolariciresinol (OR = 0.28, 95% CI: 0.11-0.61), total phytosterols (OR = 0.47, 95% CI: 0.22-0.95) and for stigmasterols (OR = 0.34, 95% CI: 0.14-0.72). We found an inverse association between increased β-sitosterol intake and phytosterols in total and the occurrence of Escherichia coli in stool samples outside reference values, with 72% (OR = 0.28, 95% CI: 0.08-0.86) and 66% (OR = 0.34, 95% CI: 0.10-1.08) reduced odds of abnormal level of bacteria for the highest compared with the lowest tertile of phytochemical consumption. Additionally, there was a trend of more frequent presence of Enterococcus spp. at relevant level in people with a higher intake of lariciresinol.

Conclusion

The beneficial effects of polyphenols and phytosterols should be emphasized and these plant-based compounds should be regarded in the context of their utility as antiviral agents preventing influenza-type infections.

Utilization of Nanotechnology to Improve the Application and Bioavailability of Phytochemicals Derived from Waste Streams

Phytochemicals are relatively small molecular species found in edible plants that may exhibit a diverse range of techno- and biofunctional attributes. In particular, there has been great interest in the identification, isolation, and utilization of dietary phytochemicals that can be used as natural pigments, antioxidants, or antimicrobials or that may improve human health and wellbeing by preventing chronic diseases, such as cardiovascular diseases, diabetes, obesity, and cancer. Relatively high levels of these phytochemicals are often present in the waste streams produced by the food and agriculture industry, such as the peels, stems, roots, or leaves of plants, that are normally discarded or turned into animal foods. From an economic and environmental perspective, it would be advantageous to convert these waste streams into value-added functional ingredients, which is consistent with the creation of a more circular economy. Bioactive phytochemicals can be isolated from agricultural and food waste streams using green extraction methods and then incorporated into plant-based functional foods or biodegradable active packaging materials. The utilization of phytochemicals in the food industry is often challenging. They may chemically degrade in the presence of light, heat, oxygen, and some pH conditions, thereby altering their biological activity. They may have low solubility in aqueous solutions and gastrointestinal fluids, thereby making them difficult to introduce into foods and leading to a low bioavailability. These challenges can sometimes be overcome using nanoencapsulation, which involves trapping the phytochemicals inside tiny food-grade particles. These nanoparticles may be assembled from edible lipids, proteins, carbohydrates, and/or surfactants and include nanoemulsions, solid lipid nanoparticles, nanoliposomes, and biopolymer nanoparticles. In this manuscript, we review a number of important phytochemicals and nanoencapsulation methods used to improve their efficacy.

Biotransformation of Barley Phenolamide by Mice and the Human Gut Microbiota and Quantitative Analysis of the Major Metabolites in Mice

SCOPE

This study investigates the metabolism of p-coumaroylagmatine (pCAA), one of the phenolamides in barley, in mice, and by human gut microbiota, and measures the concentrations of its main metabolites in mice.

METHODS AND RESULTS

Nine major metabolites are identified from fecal and urinary samples collected from pCAA treated mice via analysis of their LC chromatograms and tandem mass spectra compared to the commercial and synthesized standards. These nine metabolites are generated through four different biotransformation pathways: double bond reduction, amide bond hydrolyzation, cleavage of guanidine, and oxidation of guanidine. Furthermore, interindividual differences in the formation of dihydro-pCAA (M3), high and low metabolizers, are observed in human in vitro intestinal microbial conversion. Moreover, significant amount of pCAA is detected in mice (29.33 ± 1.58 µmol g^-1 in feces and 2020.44 ± 130.07 µM in urine), and the concentrations of agmatine (M1) are increased to 177.6 times and 3.2 times in mouse feces and urine, respectively.

CONCLUSION

This study demonstrates that pCAA is metabolized in mice and by human gut microbiota to generate potential bioactive metabolites through four major metabolic pathways. pCAA and its metabolites have the potential to be used as the exposure biomarkers to reflect the intake of whole grain barley.

The Influence of Hop Phenolic Compounds on Dry Hopping Beer Quality

Background: The article considers the phenolic hop compounds’ effect on the quality indicators of finished beer. The topic under consideration is relevant since it touches on the beer matrix colloidal stability when compounds with potential destabilizing activity are introduced into it from the outside. Methods: The industrial beer samples’ quality was assessed by industry-accepted methods and using instrumental analysis methods (high-performance liquid chromatography methods—HPLC). The obtained statistical data were processed by the Statistics program (Microsoft Corporation, Redmond, WA, USA, 2006). Results: The study made it possible to make assumptions about the functional dependence of the iso-α-bitter resins and isoxanthohumol content in beer samples. Mathematical analysis indicate interactions between protein molecules and different malted grain and hop compounds are involved in beer structure, in contrast to dry hopped beer, where iso-a-bitter resins, protein, and coloring compounds were significant, with a lower coefficient of determination. The main role of rutin in the descriptor hop bitterness has been established in kettle beer hopping technology, and catechin in dry beer hopping technology, respectively. The important role of soluble nitrogen and β-glucan dextrins in the perception of sensory descriptors of various technologies’ beers, as well as phenolic compounds in relation to the formation of bitterness and astringency of beer of classical technology and cold hopping, has been shown. Conclusions: The obtained mathematical relationships allow predicting the resulting beer quality and also make it possible to create the desired flavor profiles.

On the Trail of the German Purity Law: Distinguishing the Metabolic Signatures of Wheat, Corn and Rice in Beer

Here, we report a non-targeted analytical approach to investigate the influence of different starch sources on the metabolic signature in the final beer product. An extensive sample set of commercial beers brewed with barley, wheat, corn and/or rice were analyzed by both direct infusion Fourier transform ion cyclotron mass spectrometry (DI-FTICR MS, 400 samples) and UPLC-ToF-MS (100 samples). By its unrivaled mass resolution and accuracy, DI-FTICR-MS was able to uncover the compositional space of both polar and non-polar metabolites that can be traced back to the use of different starch sources. Reversed phase UPLC-ToF-MS was used to access information about molecular structures (MS²-fragmentation spectra) and isomeric separation, with a focus on less polar compounds. Both analytical approaches were able to achieve a clear statistical differentiation (OPLS-DA) of beer samples and reveal metabolic profiles according to the starch source. A mass difference network analysis, applied to the exact marker masses resolved by FTICR, showed a network of potential secondary metabolites specific to wheat, corn and rice. By MS²-similarity networks, database and literature search, we were able to identify metabolites and compound classes significant for the use of the different starch sources. Those were also found in the corresponding brewing raw materials, confirming the potential of our approach for quality control and monitoring. Our results also include the identification of the aspartic acid-conjugate of N-β-D-glucopyranosyl-indole-3-acetic acid as a potential marker for the use of rice in the brewing industry regarding quality control and food inspection purposes.