Transient blood thinning during extracorporeal blood purification via the inactivation of coagulation factors by hydrogel microspheres

UV-Triggered Hydrogel Coating of the Double Network Polyelectrolytes for Enhanced Endothelialization

The left atrial appendage (LAA) occluder is an important medical device for closing the LAA and preventing stroke. The device-related thrombus (DRT) prevents the implantation of the occluder in exerting the desired therapeutic effect, which is primarily caused by the delayed endothelialization of the occluder. Functional coatings are an effective strategy for accelerating the endothelialization of occluders. However, the occluder surface area is particularly large and structurally complex, and the device is subjected to a large shear friction in the sheath during implantation, which poses a significant challenge to the coating. Herein, a hydrogel coating by the in situ UV-triggered polymerization of double-network polyelectrolytes is reported. The findings reveal that the double network and electrostatic interactions between the networks resulted in excellent mechanical properties of the hydrogel coating. The sulfonate and Arg-Gly-Asp (RGD) groups in the coating promoted hemocompatibility and endothelial growth of the occluder, respectively. The coating significantly accelerated the endothelialization of the LAA occluder in a canine model is further demonstrated. This study has potential clinical benefits in reducing both the incidence of DRT and the postoperative anticoagulant course for LAA closure.

Biomimetic Anticoagulated Porous Particles with Self-Reporting Structural Colors

Anticoagulation is vital to maintain blood fluidic status and physiological functions in the field of clinical blood-related procedures. Here, novel biomimetic anticoagulated porous inverse opal hydrogel particles is presented as anticoagulant bearing dynamic screening capability. The inverse opal hydrogel particles possess abundant sulfonic and carboxyl groups, which serve as binding sites with multiple coagulation factors and inhibit the blood coagulation process. Owing to the variations of refractive index and pore sizes during the binding process, the particles appeared corresponding structure color variations, which can be adopted as sensory index of anticoagulation. Based on these features, a sensor containing these diverse structure color particle units is constructed for pattern recognition of coagulation factors level in clinical plasma samples. By analyzing the sensory information of the unit, the colorimetric "fingerprint" for each target can be obtained and summarized as a database. Besides, a portable test-strip integrating sensory units is developed to distinguish the sample regarding abnormal coagulation factors-derived diseases via multivariate data analysis. It is believed that such biomimetic anticoagulated structural color particles and their derived sensor will open new avenue for clinical detection and disease diagnosis.

Simultaneous Rosiglitazone Release and Low-Density Lipoprotein Removal by Chondroitin Sodium Sulfate/Cyclodextrin/Poly(acrylic acid) Composite Adsorbents for Atherosclerosis Therapy

Atherosclerosis (AS) is characterized by the accumulation of substantial low-density lipoprotein (LDL) and inflammatory response. Hemoperfusion is commonly employed for the selective removal of LDL from the body. However, conventional hemoperfusion merely focuses on LDL removal and does not address the symptom of plaque associated with AS. Based on the LDL binding properties of acrylated chondroitin sodium sulfate (CSA), acrylated beta-cyclodextrin (CD) and acrylic acid (AA), along with the anti-inflammatory property of rosiglitazone (R), the fabricated AA-CSA-CD-R microspheres could simultaneously release R and facilitate LDL removal for hemoperfusion. The AA and CSA offer electrostatic adsorption sites for LDL, while the CD provides hydrophobic adsorption sites for LDL and weak binding sites for R. According to the Sips model, the maximum static LDL adsorption capacity of AA-CSA-CD-R is determined to be 614.73 mg/g. In dynamic simulated perfusion experiments, AA-CSA-CD-R exhibits an initial cycle LDL adsorption capacity of 150.97 mg/g. The study suggests that the weakened inflammatory response favors plaque stabilization. The anti-inflammatory property of the microspheres is verified through an inflammation model, wherein the microsphere extracts are cocultured with mouse macrophages. Both qualitative analysis of iNOS\TNF-α and quantitative analysis of IL-6\TNF-α collectively demonstrate the remarkable anti-inflammatory effect of the microspheres. Therefore, the current study presents a novel blood purification treatment of eliminating pathogenic factors and introducing therapeutic factors to stabilize AS plaque.

Precise Capture and Dynamic Release of Circulating Liver Cancer Cells with Dual-Histidine-Based Cell Imprinted Hydrogels

Circulating tumor cells (CTCs) detection presents significant advantages in diagnosing liver cancer due to its noninvasiveness, real-time monitoring, and dynamic tracking. However, the clinical application of CTCs-based diagnosis is largely limited by the challenges of capturing low-abundance CTCs within a complex blood environment while ensuring them alive. Here, an ultrastrong ligand, l-histidine-l-histidine (HH), specifically targeting sialylated glycans on the surface of CTCs, is designed. Furthermore, HH is integrated into a cell-imprinted polymer, constructing a hydrogel with precise CTCs imprinting, high elasticity, satisfactory blood compatibility, and robust anti-interference capacities. These features endow the hydrogel with excellent capture efficiency (>95%) for CTCs in peripheral blood, as well as the ability to release CTCs controllably and alive. Clinical tests substantiate the accurate differentiation between liver cancer, cirrhosis, and healthy groups using this method. The remarkable diagnostic accuracy (94%), lossless release of CTCs, material reversibility, and cost-effectiveness ($6.68 per sample) make the HH-based hydrogel a potentially revolutionary technology for liver cancer diagnosis and single-cell analysis.

Metal-organic framework-based adsorbents for blood purification: progress, challenges, and prospects

Blood purification, such as hemodialysis (HD), plasma exchange (PE), and hemoperfusion (HP), is widely applied in patients with organ failure (such as kidney and liver failure). Among them, HP mainly relies on porous adsorbents to efficiently adsorb accumulated metabolic wastes and toxins, thus improving purification efficiency. Metal-organic frameworks (MOFs), with a high porosity, large surface area, high loading capacity, and tailorable topology, are emerging as some of the most promising materials for HP. Compared with non-metal framework counterparts, the self-built metal centers of MOFs feature the intrinsic advantages of coordination with toxin molecules. However, research on MOFs in blood purification is insufficient, particularly in contrast to materials applied in other biomedical applications. Thus, to broaden this area, this review first discusses the essential characteristics, potential mechanisms, and structure-function relationship between MOFs and toxin adsorption based on porosity, topology, ligand functionalization, metal centers, and toxin types. Moreover, the stability, utilization safety, and hemocompatibility of MOFs are illustrated for adsorbent selection. The current development and progress in MOF composites for HD, HP, and extracorporeal membrane oxygenation (ECMO) are also summarized to highlight their practicability. Finally, we propose future opportunities and challenges from materials design and manufacture to the computational prediction of MOFs in blood purification. It is anticipated that our review will expand the interest of researchers for more impact in this area.

Unraveling Endothelial Cell Migration: Insights into Fundamental Forces, Inflammation, Biomaterial Applications, and Tissue Regeneration Strategies

Cell migration is vital for many fundamental biological processes and human pathologies throughout our life. Dynamic molecular changes in the tissue microenvironment determine modifications of cell movement, which can be reflected either individually or collectively. Endothelial cell (EC) migratory adaptation occurs during several events and phenomena, such as endothelial injury, vasculogenesis, and angiogenesis, under both normal and highly inflammatory conditions. Several advantageous processes can be supported by biomaterials. Endothelial cells are used in combination with various types of biomaterials to design scaffolds promoting the formation of mature blood vessels within tissue engineered structures. Appropriate selection, in terms of scaffolding properties, can promote desirable cell behavior to varying degrees. An increasing amount of research could lead to the creation of the perfect biomaterial for regenerative medicine applications. In this review, we summarize the state of knowledge regarding the possible systems by which inflammation may influence endothelial cell migration. We also describe the fundamental forces governing cell motility with a specific focus on ECs. Additionally, we discuss the biomaterials used for EC culture, which serve to enhance the proliferative, proangiogenic, and promigratory potential of cells. Moreover, we introduce the mechanisms of cell movement and highlight the significance of understanding these mechanisms in the context of designing scaffolds that promote tissue regeneration.

Protein/Polysaccharide Composite toward Multi-in-One Toxin Removal in Blood with Self-Anticoagulation and Biocompatibility

Biocompatible adsorbents play an essential role in hemoperfusion. Nevertheless, there are no hemoperfusion adsorbents that can simultaneously remove small and medium toxins, including bilirubin, urea, phosphor, heavy metals, and antibiotics. This bottleneck significantly impedes the miniaturization and portability of hemoperfusion materials and devices. Herein, a biocompatible protein-polysaccharide complex is reported that exhibits "multi-in-one" removal efficacy for liver and kidney metabolism wastes, toxic metal ions, and antibiotics. Through electrostatic interactions and polysaccharide-mediated coacervation, adsorbents can be prepared by simply mixing lysozyme (LZ) and sodium alginate (SA) together in seconds. The LZ/SA absorbent presented high adsorption capacities for bilirubin, urea, and Hg2+ of up to 468, 331, and 497 mg g-1 , respectively, and the excellent anti-protein adsorption endowed LZ/SA with a record-high adsorption capacity for bilirubin in the interference of serum albumin to simulate the physiological environment. The LZ/SA adsorbent also has effective adsorption capacity for heavy metals (Pb2+ , Cu2+ , Cr3+ , and Cd2+ ) and multiple antibiotics (terramycin, tetracycline, enrofloxacin, norfloxacin, roxithromycin, erythromycin, sulfapyrimidine, and sulfamethoxazole). Various adsorption functional groups exposed on the adsorbent surface significantly contribute to the excellent adsorption capacity. This fully bio-derived protein/alginate-based hemoperfusion adsorbent has great application prospects in the treatment of blood-related diseases.

Bioinspired, Anticoagulative, 19 F MRI-Visualizable Bilayer Hydrogel Tubes as High Patency Small-Diameter Vascular Grafts

The clinical patency of small-diameter vascular grafts (SDVGs) (ID < 6 mm) is limited, with the formation of mural thrombi being a major threat of this limitation. Herein, a bilayered hydrogel tube based on the essential structure of native blood vessels is developed by optimizing the relation between vascular functions and the molecular structure of hydrogels. The inner layer of the SDVGs comprises a zwitterionic fluorinated hydrogel, avoiding the formation of thromboinflammation-induced mural thrombi. Furthermore, the position and morphology of the SDVGs can be visualized via 19 F/1 H magnetic resonance imaging. The outer poly(N-acryloyl glycinamide) hydrogel layer of SDVGs provides matched mechanical properties with native blood vessels through the multiple and controllable intermolecular hydrogen-bond interactions, which can withstand the accelerated fatigue test under pulsatile radial pressure for 380 million cycles (equal to a service life of 10 years in vivo). Consequently, the SDVGs exhibit higher patency (100%) and more stable morphology following porcine carotid artery transplantation for 9 months and rabbit carotid artery transplantation for 3 months. Therefore, such a bioinspired, antithrombotic, and visualizable SDVG presents a promising design approach for long-term patency products and great potential of helping patients with cardiovascular diseases.

Surface Engineering of Central Venous Catheters via Combination of Antibacterial Endothelium-Mimicking Function and Fibrinolytic Activity for Combating Blood Stream Infection and Thrombosis

Long-term blood-contacting devices (e.g., central venous catheters, CVCs) still face the highest incidence of blood stream infection and thrombosis in clinical application. To effectively address these complications, this work reports a dual-functional surface engineering strategy for CVCs by organic integration of endothelium-mimicking and fibrinolytic functions. In this proposal, a lysine (Lys)/Cu2+ -incorporated zwitterionic polymer coating (defined as PDA/Lys/Cu-SB) is designed and robustly fabricated onto commercial CVCs using a facile two-step process. Initially, adhesive ene-functionalized dopamine is covalently reacted with Lys and simultaneously coordinated with bactericidal Cu2+ ions, leading to the deposition of a PDA/Lys/Cu coating on CVCs through mussel foot protein inspired surface chemistry. Next, zwitterionic poly(sulfobetaine methacrylate) (pSB) brushes are grafted onto the PDA/Lys/Cu coating to endow lubricant and antifouling properties. In the final PDA/Lys/Cu-SB coating, endothelium-mimicking function is achieved by combining the catalytic generation of nitric oxide from the chelated Cu2+ with antifouling pSB brushes, which led to significant prevention of thrombosis, and bacterial infection in vivo. Furthermore, the immobilized Lys with fibrinolytic activity show remarkably enhanced long-term anti-thrombogenic properties as evidenced in vivo by demonstrating the capability to lyse nascent clots. Therefore, this developed strategy provides a promising solution for long-term blood-contacting devices to combat thrombosis and infection.

Self-anticoagulant sponge for whole blood auto-transfusion and its mechanism of coagulation factor inactivation

Clinical use of intraoperative auto-transfusion requires the removal of platelets and plasma proteins due to pump-based suction and water-soluble anticoagulant administration, which causes dilutional coagulopathy. Herein, we develop a carboxylated and sulfonated heparin-mimetic polymer-modified sponge with spontaneous blood adsorption and instantaneous anticoagulation. We find that intrinsic coagulation factors, especially XI, are inactivated by adsorption to the sponge surface, while inactivation of thrombin in the sponge-treated plasma effectively inhibits the common coagulation pathway. We show whole blood auto-transfusion in trauma-induced hemorrhage, benefiting from the multiple inhibitory effects of the sponge on coagulation enzymes and calcium depletion. We demonstrate that the transfusion of collected blood favors faster recovery of hemostasis compared to traditional heparinized blood in a rabbit model. Our work not only develops a safe and convenient approach for whole blood auto-transfusion, but also provides the mechanism of action of self-anticoagulant heparin-mimetic polymer-modified surfaces.

Unusual Surface Coagulation Activation Patterns of Crystalline and Amorphous Silicate-Based Biominerals

Activation of coagulation cascades, especially FX and prothrombin, prevents blood loss and reduces mortality from hemorrhagic shock. Inorganic salts are efficient but cannot stop bleeding completely in hemorrhagic events, and rebleeding carries a significant mortality risk. The coagulation mechanism of biominerals has been oversimplified in the past two decades, limiting the creation of novel hemostats. Herein, at the interface, the affinity of proteins, the protease activity, fibrinolysis, hydration shell, and dynamic microenvironment are monitored at the protein level. Proteomic analysis reveals that fibrinogen and antithrombin III's affinity for kaolin's interface causes a weak thrombus and rebleeding during hemostasis. Inspiringly, amorphous bioactive glass (BG) with a transient-dynamic ion microenvironment breaches the hydration layer barrier and selectively and slightly captures procoagulant components of kiniogen-1, plasma kallikrein, FXII, and FXI proteins on its interface, concurrently generating a continuous biocatalytic interface to rapidly activate both intrinsic and extrinsic coagulation pathways. Thus, prothrombin complexes are successfully hydrolyzed to thrombin without platelet membrane involvement, speeding production of high-strength clots. This study investigates how the interface of inorganic salts assists in coagulation cascades from a more comprehensive micro-perspective that may help elucidate the clinical application issues of kaolin-gauze and pave the way to new materials for managing hemorrhage.

Specific Clearance of Lipopolysaccharide from Blood Based on Peptide Bottlebrush Polymer for Sepsis Therapy

Lipopolysaccharide (LPS) is the primary bacterial toxin that is vital to the pathogenesis and progression of sepsis associated with extremely high morbidity and mortality worldwide. However, specific clearance of LPS from circulating blood is highly challenging because of the structural complexity and its variation between/within bacterial species. Herein, a robust strategy based on phage display screening and hemocompatible peptide bottlebrush polymer design for specific clearance of targeted LPS from circulating blood is proposed. Using LPS extracted from Escherichia coli as an example, a novel peptide (HWKAVNWLKPWT) with high affinity (KD < 1.0 nм), specificity, and neutralization activity (95.9 ± 0.1%) against the targeted LPS is discovered via iterative affinity selection coupled with endotoxin detoxification screening. A hemocompatible bottlebrush polymer bearing the short peptide [poly(PEGMEA-co-PEP-1)] exhibits high LPS selectivity to reduce circulating LPS level from 2.63 ± 0.01 to 0.78 ± 0.05 EU mL-1 in sepsis rabbits via extracorporeal hemoperfusion (LPS clearance ratio > 70%), reversing the LPS-induced leukocytopenia and multiple organ damages significantly. This work provides a universal paradigm for developing a highly selective hemoadsorbent library fully covering the LPS family, which is promising to create a new era of precision medicine in sepsis therapy.

Light-Driven Self-Recruitment of Biomimetic Semiconducting Polymer Nanoparticles for Precise Tumor Vascular Disruption

Tumor vascular disrupting therapy has offered promising opportunities to treat cancer in clinical practice, whereas the overall therapeutic efficacy is notably limited due to the off-target effects and repeated dose toxicity of vascular disrupting agents (VDAs). To tackle this problem, a VDA-free biomimetic semiconducting polymer nanoparticle (SPN_P ) is herein reported for precise tumor vascular disruption through two-stage light manipulation. SPN_P consists of a semiconducting polymer nanoparticle as the photothermal agent camouflaged with platelet membranes that specifically target disrupted vasculature. Upon the first photoirradiation, SPN_P administered in vivo generates mild hyperthermia to trigger tumor vascular hemorrhage, which activates the coagulation cascade and recruits more SPN_P to injured blood vessels. Such enhanced tumor vascular targeting of photothermal agents enables intense hyperthermia to destroy the tumor vasculature during the second photoirradiation, leading to complete tumor eradication and efficient metastasis inhibition. Intriguingly, the mechanism study reveals that this vascular disruption strategy alleviates splenomegaly and reverses the immunosuppressive tumor microenvironment by reducing myeloid-derived suppressor cells. Therefore, this study not only illustrates a light-driven self-recruitment strategy to enhance tumor vascular disruption via a single dose of biomimetic therapeutics but also deciphers the immunotherapeutic role of vascular disruption therapy that is conducive to clinical studies.

Advances in Enhancing Hemocompatibility of Hemodialysis Hollow-Fiber Membranes

Hemodialysis, the most common modality of renal replacement therapy, is critically required to remove uremic toxins from the blood of patients with end-stage kidney disease. However, the chronic inflammation, oxidative stress as well as thrombosis induced by the long-term contact of hemoincompatible hollow-fiber membranes (HFMs) contribute to the increase in cardiovascular diseases and mortality in this patient population. This review first retrospectively analyzes the current clinical and laboratory research progress in improving the hemocompatibility of HFMs. Details on different HFMs currently in clinical use and their design are described. Subsequently, we elaborate on the adverse interactions between blood and HFMs, involving protein adsorption, platelet adhesion and activation, and the activation of immune and coagulation systems, and the focus is on how to improve the hemocompatibility of HFMs in these aspects. Finally, challenges and future perspectives for improving the hemocompatibility of HFMs are also discussed to promote the development and clinical application of new hemocompatible HFMs.

Graphical Abstract

MOFs-alginate/polyacrylic acid/poly (ethylene imine) heparin-mimicking beads as a novel hemoadsorbent for bilirubin removal in vitro and vivo models

Metal-organic frameworks (MOFs) have a potential application in blood purification, but their microcrystalline nature has hampered their industrial application. Here, novel MOFs-polymer beads based on UiO, sodium alginate, polyacrylic acid, and poly (ethylene imine) were prepared and applied as a whole blood hemoadsorbent for the first time. The amidation among polymers immobilized UiO66-NH₂ into the network of the optimal product (SAP-3), and the NH₂ of UiO66-NH₂ significantly increased the removal rate (70 % within 5 min) of SAP-3 on bilirubin. The adsorption of SAP-3 on bilirubin mainly obeyed the pseudo-second-order kinetic, Langmuir isotherm and Thomas models with a maximum adsorption capacity (q_m) of 63.97 mg·g^-1. Experimental and density functional theory simulation results show that bilirubin was mainly adsorbed by UiO66-NH₂via electrostatic force, hydrogen bonding, and π-π interactions. Notably, the adsorption in vivo show that the total bilirubin removal rate in the whole blood of the rabbit model was up to 42 % after 1 h of adsorption. Given its excellent stability, cytotoxicity, and hemocompatibility, SAP-3 has a great potential in hemoperfusion therapy. This study proposes an effective strategy for settling the powder property of MOFs and could provide experimental and theoretical references for application of MOFs in blood purification.

Targeting circulating high mobility group box-1 and histones by extracorporeal blood purification as an immunomodulation strategy against critical illnesses

Both high mobility group box-1 (HMGB1) and histones are major damage-associated molecular patterns (DAPMs) that mediate lethal systemic inflammation, activation of the complement and coagulation system, endothelial injury and multiple organ dysfunction syndrome in critical illnesses. Although accumulating evidence collectively shows that targeting HMGB1 or histones by their specific antibodies or inhibitors could significantly mitigate aberrant immune responses in multiple critically ill animal models, routine clinical use of such agents is still not recommended by any guideline. In contrast, extracorporeal blood purification, which has been widely used to replace dysfunctional organs and remove exogenous or endogenous toxins in intensive care units, may also exert an immunomodulatory effect by eliminating inflammatory mediators such as cytokines, endotoxin, HMGB1 and histones in patients with critical illnesses. In this review, we summarize the multiple immunopathological roles of HMGB1 and histones in mediating inflammation, immune thrombosis and organ dysfunction and discuss the rationale for the removal of these DAMPs using various hemofilters. The latest preclinical and clinical evidence for the use of extracorporeal blood purification to improve the clinical outcome of critically ill patients by targeting circulating HMGB1 and histones is also gathered.

Bilirubin Removal by Polymeric Adsorbents for Hyperbilirubinemia Therapy

Hyperbilirubinemia, presenting as jaundice, is a life-threatening critical illness in newborn babies and acute severe hepatic failure patients. Over the past few decades, extracorporeal hemoadsorption by adsorbent therapy has been widely applied in the treatment of hyperbilirubinemia. The capability of hemoadsorption depends on the adsorbents. Most of the clinically used bilirubin adsorbents are made up of styrene/divinylbenzene copolymer and quaternary ammonium salt, which usually have poor biocompatibility and weak mechanical strength. To overcome the drawbacks of commercial polymer adsorbents, advanced synthetic and natural polymers with/without nanomaterials have been designed, and novel adsorbent fabrication technologies have also been developed. In this review, the adsorption mechanism of bilirubin adsorbents has been summarized, which is the basic criterion in adsorbent development. Furthermore, the preparation method, adsorption mechanism, relative merits and practicability of the emerging bilirubin adsorbents have been evaluated. Based on the existing studies, this work highlights the future direction of the efforts on how to design and develop bilirubin adsorbents with good overall clinical performance. Perhaps this study can change traditional perspectives and propose new strategies for bilirubin clearance from the aspects of pathogenic mechanisms, metabolic pathways, and material-based innovation.

Cell-inspired selective potassium removal towards hyperkalemia therapy by microphase-isolated core-shell microspheres

Hyperkalemia is a common metabolic problem in patients with chronic kidney disease. Although oral medications and hemodialysis are clinically applied for lowering serum potassium, the intrinsic limitations encourage alternative therapy in the trend of adsorbent-based miniaturized blood purification devices. Cells serve as the biological K⁺ storage units that accumulate K⁺ through multiple mechanisms. Inspired by cells, our strategy aims at favorable permeation and enrichment of K⁺ in the microsphere. We incorporate cation-affinitive groups into core-shell structures with submicron-sized phase separation. These nano-spaced side-groups cooperate to form interlinked clusters, where crown ethers with Angstrom-scale ring for size-matched complexation, while ionic sulfonic acid groups for hydrophilicity and charge-buffering. The unique structure with such non-covalent interactions facilitates K⁺ for permeation across the shell and binding to the core while also ensuring mechanical strength and anti-swelling durability in biofluids. The microspheres exhibit high selectivity ratios of K⁺ (S_K/Na, S_K/Ca, S_K/Mg up to 9.8, 21.6, and 17.7). As column adsorbents for hemoperfusion simulation, they effectively lower elevated K⁺ levels to the normal range (clearance rates up to 44.4%/45.3% for hyperkalemic human serum/blood). Blood compatibility tests show low protein adsorption, preferable hemocyte compatibility, and anticoagulation property in vitro. This promising strategy has clinical potential for hyperkalemia in high-risk patients. STATEMENT OF SIGNIFICANCE: Hyperkalemia (serum potassium >5 mmol/L) is a common complication in chronic renal failure patients. The limitations of existing treatments prompt a shift to wearable artificial kidney technology for clinical convenience and efficacy. Existing treatments have limitations, and we turn to adsorbent-based miniaturized blood purification devices in the prospect of wearable artificial kidney technology. There exists a lack of ion-specific adsorbents applied in extracorporeal circuits to redress electrolyte imbalances like hyperkalemia. Inspired by cells, we aim at the favorable permeation and enrichment of K⁺ by microspheres. The microspheres have a microphase-isolated core-shell structure, whose nano-spaced groups form cation-affinitive clusters. Selective K⁺ removal and blood compatibility are achieved. We expect this strategy to enlighten alternative hyperkalemia therapy for these high-risk patients.

A breakthrough trial of an artificial liver without systemic heparinization in hyperbilirubinemia beagle models

The development of wearable artificial livers was restricted to device miniaturization and bleeding risk with water-soluble anticoagulants. Herein, a double-deck column filled with solid anticoagulant microspheres and Kevlar porous microspheres (KPMs, bilirubin adsorbents) was connected with the principle machine of wearable artificial liver (approximately 9 kg) to treat hyperbilirubinemia beagles for the first time. With the initial normal dose of heparin, the double-deck column could afford 3 h hemoperfusion in whole blood without thrombus formation. The removal efficiency of the double-deck column for total bilirubin (TBIL) was 31.4%. Interestingly, the excessive amounts of hepatocyte metabolites were also decreased by approximately 25%. The “anticoagulant + column” realized safe and effective whole blood hemoperfusion without the plasma separation system and heparin pump; however, the proposed principle machine of wearable artificial liver and “anticoagulant + column” cannot completely replace the bio-liver now. The intelligence of the device and the versatility of the adsorbent need to be improved; moreover, advanced experimental techniques need to be developed to validate the survival rates in animals. Overall, this study is a meaningful trial for the development of wearable artificial livers in the future.

•

This is a breakthrough trial of a wearable artificial liver to perform in hyperbilirubinemia beagle models without systemic heparinization treatment.

•

We proposed the “solid anticoagulant microspheres” to supersede water-soluble anticoagulant medications in the artificial liver, which could reduce the bleeding risks for patients and supersede heparin pump to further reduce the weight of wearable artificial liver.

•

The “anticoagulant + column” could provide a safe, efficient and low-cost blood purification method, which will be a milestone in the clinical development of wearable artificial livers.

Superhydrophobic Biological Fluid-Repellent Surfaces: Mechanisms and Applications

Superhydrophobic biological fluid-repellent surfaces (SBFRSs) have attracted great attention in the treatment of blood and urine-related diseases because of their unique wettability and compatibility, which creates a new path for the development of medical apparatus and instruments, and are expected to create advances in various fields. Here, this review provides an up-to-date summary of research progress on the repellent mechanism and application of SBFRSs. The underlying physical and chemical principles for designing superhydrophobic surfaces are first introduced. Then, the dialectical influences of solid-liquid interactions between superhydrophobic surfaces and biological fluids on the wettability and compatibility are emphatically expounded. Subsequently, attention is drawn to the recent applications of SBFRSs in biomedical fields, such as surgical medical apparatus, implant materials, extracorporeal circulation devices, and biological fluid detection. Finally, the outlook and challenges in terms of employing SBFRSs are also discussed. This review is expected to provide a comprehensive guidance for the preparation of SBFRSs with compatibility and long-term superhydrophobic stability that is closely related to clinical applications.

Engineering Antioxidative Cascade Metal-Phenolic Nanozymes for Alleviating Oxidative Stress during Extracorporeal Blood Purification

Oxidative stress is a compelling risk factor in chronic kidney diseases and is further aggravated for individuals during extracorporeal blood purification, ultimately leading to multiple complications. Herein, antioxidative cascade metal-phenolic nanozymes (metal-tannic acid nanozymes, M-TA NMs) are synthesized via metal ions-mediated oxidative coupling of polyphenols; then M-TA NMs engineered hemoperfusion microspheres (Cu-TAn@PMS) are constructed for alleviating oxidative stress. M-TA NMs show adjustable broad-spectrum antioxidative activities toward multiple reactive nitrogen and oxygen species (RNOS) due to the adjustable catalytic active centers. Importantly, M-TA NMs could mimic the cascade processes of superoxide dismutase and catalase to maintain intracellular redox balance. Detailed structural and spectral analyses reveal that the existence of a transition metal could decrease the electronic energy band gaps of M-TA NMs to offer better electron transfers for RNOS scavenging. Notably, dynamic blood experiments demonstrate that Cu-TAn@PMS could serve as an antioxidant defense system for blood in hemoperfusion to scavenge intracellular reactive oxygen species (ROS) effectively even in the complex blood environment and further protect endogenous antioxidative enzymes and molecules. In general, this work developed antioxidative cascade nanozymes engineered microspheres with excellent therapeutic efficacy for the treatment of oxidative stress-related diseases, which exhibited potential for clinical blood purification and extended the biomedical applications of nanozymes.

Nanozyme-reinforced hydrogel as a H2O2-driven oxygenerator for enhancing prosthetic interface osseointegration in rheumatoid arthritis therapy

Stem cell-based therapy has drawn attention for enhancing the osseointegration efficiency after joint replacement in the rheumatoid arthritis (RA). However, therapeutic efficacy of this approach is threatened by the accumulated reactive oxygen species (ROS) and poor oxygen supply. Herein, we develop a nanozyme-reinforced hydrogel for reshaping the hostile RA microenvironment and improving prosthetic interface osseointegration. The engineered hydrogel not only scavenges endogenously over-expressed ROS, but also synergistically produces dissolved oxygen. Such performance enables the hydrogel to be utilized as an injectable delivery vehicle of bone marrow-derived mesenchymal stem cells (BMSCs) to protect implanted cells from ROS and hypoxia-mediated death and osteogenic limitation. This nanozyme-reinforced hydrogel encapsulated with BMSCs can alleviate the symptoms of RA, including suppression of local inflammatory cytokines and improvement of osseointegration. This work provides a strategy for solving the long-lasting challenge of stem cell transplantation and revolutionizes conventional intervention methods for improving prosthetic interface osseointegration in RA.

Anticoagulation polyvinyl chloride extracorporeal circulation catheters for heparin-free treatment

Extracorporeal circulation (ECC) catheters have potential to be blood compatible and could be used to prevent thrombotic occlusion. Here, we produced heparin-mimicking anticoagulation PVC tubing on a large scale by synthesizing a heparin-mimicking polymer (HMP) and co-extruding. The PVC@HMP catheter was evaluated using whole human blood in vitro, which indicated it could prevent plasma protein attachment, reduce platelet adhesion and activation, and inhibit coagulation factors (XII, XI, IX, and VIII). Moreover, the anticoagulation PVC tubing was assembled into extracorporeal circulation with a New Zealand rabbit model, manifesting excellent real-time antithrombogenic properties without systemic heparin anticoagulation in vivo. The rapid recovery of coagulation factors after operation further confirmed its superiority over heparin, which would not completely inactivate the activity of those coagulation factors (XII, XI, IX and VIII). In addition, the PVC@HMP-1 catheters remain patent after being implanted in rats for 28 days without apparent inflammation and mortality complications. The anticoagulation PVC tubes could be used to construct various systemic and integrative anticlotting biomedical devices, which would dramatically reduce the introduction of heparin into blood circulation, thus preventing side effects and promoting the development of heparin-free treatment.

Fabrication of 2D nanosheet sorbents through metastable emulsion droplets and subsequent two-step grafting polymerization for efficient blood lead removal in vitro

Hemoperfusion is a powerful and yet simple method for lead poisoning treatment, but creation of safe and effective sorbents with excellent selectivity remains a real challenge. To address this, we here construct 2D nanosheet sorbents (BM-SH) through metastable emulsion droplets and subsequent two-step grafting polymerization for efficient blood lead removal in vitro. Metastable emulsion droplets endow typical nanosized sheet-like structure (thickness of 30 nm) and relatively round shape. The consecutive two grafting processes using hydroxyethyl methacrylate (HEMA) and L-cysteine monomer (D-SH) provide BM-SH with a high density of accessible binding sites towards lead ions (Pb²⁺). A high adsorption capacity of 390.5 mg g^-1 and quick capture 97.35 % of Pb²⁺ within initial 10 min are obtained, surpassing most of the reported sorbents for lead removal. Besides, adsorption distribution coefficient (K_d) of BM-SH among four coexisting metal ions achieved 7792 mL g^-1, showing outstanding selectivity toward Pb²⁺. Importantly, a possible adsorption mechanism is recognized as coordination with carboxyl, sulfydryl and imino groups from L-cysteine, and mercapto ligand as the key chelating agent may be the reason for high Pb²⁺ affinity. And what's more, BM-SH displays good hemocompatibility and high efficiency of blood lead removal rate (above 86 % in vitro).

Wireless charging-mediated angiogenesis and nerve repair by adaptable microporous hydrogels from conductive building blocks

Traumatic brain injury causes inflammation and glial scarring that impede brain tissue repair, so stimulating angiogenesis and recovery of brain function remain challenging. Here we present an adaptable conductive microporous hydrogel consisting of gold nanoyarn balls-coated injectable building blocks possessing interconnected pores to improve angiogenesis and recovery of brain function in traumatic brain injury. We show that following minimally invasive implantation, the adaptable hydrogel is able to fill defects with complex shapes and regulate the traumatic brain injury environment in a mouse model. We find that placement of this injectable hydrogel at peri-trauma regions enhances mature brain-derived neurotrophic factor by 180% and improves angiogenesis by 250% in vivo within 2 weeks after electromagnetized stimulation, and that these effects facilitate neuron survival and motor function recovery by 50%. We use blood oxygenation level-dependent functional neuroimaging to reveal the successful restoration of functional brain connectivity in the corticostriatal and corticolimbic circuits.

Ultraporous Polyquaternium-Carboxylated Chitosan Composite Hydrogel Spheres with Anticoagulant, Antibacterial, and Rapid Endotoxin Removal Profiles for Sepsis Treatment

Hemoperfusion is an important method to remove endotoxins and save the lives of patients with sepsis. However, the current adsorbents for hemoperfusion have disadvantages of insufficient endotoxin adsorption capacity, poor blood compatibility, and so on. Herein, we proposed a novel emulsion templating (ET) method to prepare ultraporous and double-network carboxylated chitosan (CCS)-poly(diallyl dimethylammonium chloride) (PDDA) hydrogel spheres (ET-CCSPD), bearing both negative and positive charges. CCS was introduced to balance the strong positive charges of PDDA to improve hemocompatibility, and emulsion templates endowed the adsorbent with an ultraporous structure for enhanced adsorption efficacy. The ET-CCSPDs neither damaged blood cells nor activated complement responses. In addition, the activated partial thromboplastin time (APTT) was prolonged to 8.5 times, which was beneficial for reducing the injection of anticoagulant in patients. The ET-CCSPDs had excellent scavenging performance against bacteria and endotoxin, with removal ratios of 96.7% for E. coli and 99.8% for S. aureus, respectively, and the static removal ratio of endotoxin in plasma was as high as 99.1% (C₀ = 5.50 EU/mL, critical illness level). An adsorption cartridge filled with the ET-CCSPDs could remove 84.7% of endotoxin within 1 h (C₀ = 100 EU/mL in PBS). Interestingly, the ET-CCSPDs had a good inhibitory effect on the cytokines produced by endotoxin-mediated septic blood. By developing the ET method to prepare ultraporous and double-network adsorbents, the problems of low adsorption efficiency and poor blood compatibility of traditional endotoxin adsorbents have been solved, thus opening a new route to fabricate absorbents for blood purification.

A novel poly (4-methyl-1-pentene)/polypropylene (PMP/PP) thin film composite (TFC) artificial lung membrane for enhanced gas transport and excellent hemo-compatibility

Extracorporeal membrane oxygenation is a technique that provides short-term supports to the heart and lungs. It removes CO₂ from the blood and provides enough oxygen, which is a huge help in the fight against COVID-19. As the key component, the artificial lung membranes have evolved in three generations including silicon, polypropylene and poly (4-methyl-1-pentene). Herein, we for the first time design and fabricate a novel poly (4-methyl-1-pentene)/polypropylene (PMP/PP) thin film composite (TFC) membrane with the anticoagulant coating composed of poly (sodium 4-styrenesulfonate) and cross-linked poly (vinyl alcohol). Poly (sodium 4-styrenesulfonate) provides sulfonic acid groups to inhibit the coagulant factors (FVIII and FXII), and cross-linked poly (vinyl alcohol) increase the stability of the anticoagulant coating and further improve the hydrophilicity via abundant hydroxyl groups to depress the protein adsorption. Long-term anticoagulant property was demonstrated by whole human blood for 28 days. Blood compatibility was evaluated by hemolysis rate, anticoagulation activity (APTT, TT and PT), complement activation, platelet activation and contact activation. Pure CO₂, O₂ and N₂ permeation rates were determined to evaluate the mass transfer properties of PMP/PP TFC membranes. Gas permeation results revealed that gas permeation flux increased in the TFC membranes because of the decrease of crystallinity. Overall, the so prepared PMP/PP membrane shows good CO₂/O₂ selectivity and blood compatibility as novel TFC artificial lung membrane.

Molecularly-imprinted hydrogel beads via self-sacrificing micro-reactors as safe and selective bilirubin adsorbents

For patients who are suffering from liver dysfunction or metabolic obstruction, excessive bilirubin (BIL) in their bodies may cause jaundice with irreversible cerebral injury. Traditional exchange transfusion and photodynamic therapy pose a risk of serious adverse reactions or limited curative effects. Therefore, as a generally used treatment, hemoperfusion (HP) purifies patients' blood with solid adsorbents. However, the development of clinical BIL absorbents is greatly impeded by low selectivity and unsatisfactory blood compatibility. Herein, inspired by oviparity, we propose BIL-imprinted poly(acrylic acid-co-sodium p-styrenesulfonate)-reduced graphene oxide (PAA-SS-rGO@BIL) hydrogel beads as BIL adsorbents via self-sacrificing micro-reactors. In the micro-reactors, cross-linked polymerization is achieved and a solidified gel is formed. The received hydrogel beads show outstanding selective adsorption capabilities toward BIL due to the recognition sites, and π-π and hydrophobic interactions. Such hydrogel beads possess superior blood compatibility owing to their bioinspired heparin-mimicking gel structure. Simulated BIL selective adsorption experiments in vitro demonstrate that the BIL concentrations in the plasma of a patient with severe jaundice can be restored to a moderate level within 3 hours. Therefore, hydrogel beads offer new options for clinical BIL adsorption.

Heparin-like anticoagulant polypeptides with tunable activity: Synthesis, characterization, anticoagulative properties and clot solubilities in vitro

Due to the uncontrollable anticoagulant activity and limited source, Heparin, which is commonly used in clinical anticoagulation therapies, faces the risk of spontaneous bleeding and thrombocytopenia. Herein, a series of anionic poly(amino acid) s poly (l-Serine-ran-L-Glutamic acid-ran-L-Cysteine-SO₃) (PSEC-SO₃) were prepared by the controlled Ring Opening Polymerization (ROP) of N-Carboxyanhydrides (NCAs). The anticoagulant activities of PSEC-SO₃ can be regulated by simply adjusting the feeding ratio of monomers. In vitro tests show that these polypeptides can effectively prolong the Activated Partical Thromboplastin Time (APTT) and inhibit Factor IIa and Factor Xa, but has no significant effect on Prothrombin Time (PT) and Thrombin Time (TT), which indicates that PSEC-SO₃ mainly act on the intrinsic pathway. In summary, the activity-tunable heparin-like polypeptides are expected to have good application prospects in the anticoagulant field.

Facile and green approach towards biomass-derived hydrogel powders with hierarchical micro-nanostructures for ultrafast hemostasis

Although a series of biomass-derived hemostats has been developed, the desire for green-prepared hemostatic materials with biosafety has not decreased. Herein, we constructed porous carboxymethyl chitosan/sodium alginate/Ca(OH)₂ powders (PCSCPs) with suitable adaptability for instant control of irregular hemorrhage via a facile and green approach. By one-pot chemical crosslinking of carboxymethyl chitosan and sodium alginate, hydrogels were formed and immediately ionically cross-linked along with the generation of Ca(OH)₂ to prepare PCSCPs. As hydrogel powders, PCSCPs with abundant hydrophilic carboxymethyl groups and porous hierarchically micro-nanostructures displayed a high water absorption ratio of over 1600%. The PCSCPs were confirmed with favorable hemocompatibility, non-cytotoxic effects and excellent degradability. Hemostasis assays in vitro showed that PCSCPs possessed an outstanding property of platelet activation and red blood cell aggregation. The PCSCPs effectively shortened the hemostatic time and blood loss to ca. 50% in rodent bleeding models compared with medical gauze and commercial chitosan-based hemostats. Furthermore, a mouse subcutaneous implantation model demonstrated an ignorable inflammation response and potential tissue repair capability of PCSCPs. It's believed that green-prepared and biomass-derived PCSCPs are feasible biomedical hemostatic materials in view of engineering and provide a promising platform to design hemostats in prehospital management and clinical settings.

Advances in the Development of Biomaterials for Endotoxin Adsorption in Sepsis

Sepsis, a life-threatening and intractable disease without any specific treatment, is activated by endotoxin. Some attempts at removing endotoxin to treat sepsis from the blood circulation using different hemoperfusion cartridges have been proposed recently, but they have failed to reduce the mortality of severe septic patients. This review summarizes the latest advances in the development of endotoxin adsorbents. In particular, we highlight two critical parameters for endotoxin adsorbents when they are applied in blood purification: the dissociation constant and the maximum adsorption capacity. We also discuss potential challenges and research directions for the future development of endotoxin adsorbents.