A metal-organic framework that exhibits CO2-induced transitions between paramagnetism and ferrimagnetism

Spin-State Control in Dysprosium(III) Metallacrown Magnets via Thioacetal Modification

Integrating controllable spin states into single-molecule magnets (SMMs) enables precise manipulation of magnetic interactions at a molecular level, but remains a synthetic challenge. Herein, we developed a 3d-4f metallacrown (MC) magnet [DyNi5(quinha)5(Clsal)2(py)8](ClO4) ⋅ 4H2O (H2quinha=quinaldichydroxamic acid, HClsal=5-chlorosalicylaldehyde) wherein a square planar NiII is stabilized by chemical stacking. Thioacetal modification was employed via post-synthetic ligand substitutions and yielded [DyNi5(quinha)5(Clsaldt)2(py)8](ClO4) ⋅ 3H2O (HClsaldt=4-chloro-2-(1,3-dithiolan-2-yl)phenol). Thanks to the additional ligations of thioacetal onto the NiII site, coordination-induced spin state switching (CISSS) took place with spin state altering from low-spin S=0 to high-spin S=1. The synergy of CISSS effect and magnetic interactions results in distinct energy splitting and magnetic dynamics. Magnetic studies indicate prominent enhancement of reversal barrier from 57 cm-1 to 423 cm-1, along with hysteresis opening and an over 200-fold increment in coercive field at 2 K. Ab initio calculations provide deeper insights into the exchange models and rationalize the relaxation/tunnelling pathways. These results demonstrate here provide a fire-new perspective in modulating the magnetization relaxation via the incorporation of controllable spin states and magnetic interactions facilitated by the CISSS approach.

Post-synthetic molecular modifications based on Schiff base condensation reactions for designing functional paddlewheel diruthenium(II,II) complexes

A new synthetic route for constructing functional paddlewheel diruthenium(II,II) complexes ([RuII,II2]) was developed by utilizing Schiff base condensation reactions of formyl-substituted benzoate-bridged [RuII,II2] complexes with various aromatic monoamines under mild conditions. Cyclic voltammetry and DFT calculations revealed that the attached Schiff base groups significantly affected the electronic states of the resulting [RuII,II2] complexes.

Theoretical Study on the Open-Shell Electronic Structure and Electron Conductivity of [18]Annulene as a Molecular Parallel Circuit Model

Herein, the electron conductivities of [18]annulene and its derivatives are theoretically examined as a molecular parallel circuit model consisting of two linear polyenes. Their electron conductivities are estimated by elastic scattering Green's function (ESGF) theory and density functional theory (DFT) methods. The calculated conductivity of the [18]annulene does not follow the classical conductivity, i.e., Ohm's law, suggesting the importance of a quantum interference effect in single molecules. By introducing electron-withdrawing groups into the annulene framework, on the other hand, a spin-polarized electronic structure appears, and the quantum interference effect is significantly suppressed. In addition, the total current is affected by the spin polarization because of the asymmetry in the coupling constant between the molecule and electrodes. From these results, it is suggested that the electron conductivity as well as the quantum interference effect of π-conjugated molecular systems can be designed using their open-shell nature, which is chemically controlled by the substituents.

CO2-Sensitive Porous Magnet: Antiferromagnet Creation from a Paramagnetic Charge-Transfer Layered Metal-Organic Framework

Porous magnets that undergo a magnetic phase transition in response to gaseous adsorbates are desirable for the development of sustainable sensing and memory devices. Familiar gases such as O2 and CO2 are one class of target adsorbates because of their close association with life sciences and environmental issues; however, it is not easy to develop magnetic devices that respond to these ubiquitous gases. To date, only three examples of gas-responsive magnetic phase transitions have been demonstrated: (i) from a ferrimagnet to an antiferromagnet, (ii) its vice versa (i.e., change of magnetic phase), and (iii) from a ferrimagnet to a paramagnet (i.e., erasure of the magnetic phase). However, the creation of a magnet, meaning the change from a nonmagnet to a magnet by O2 or CO2 gas adsorption and magnetic switching by this phenomenon have not yet been explored. Herein, we report a CO2-induced antiferromagnet modified from a paramagnetic charge-flexible layered compound, [{Ru2(2,4-F2PhCO2)4}2TCNQ(OEt)2] (1; 2,4-F2PhCO2- = 2,4-difluorobenzoate; TCNQ(OEt)2 = 2,5-diethoxy-7,7,8,8-tetracyanoquinodimethane), where three molar equivalents of CO2 was accommodated at a CO2 pressure of 100 kPa. The magnetic change originates from charge fluctuation due to the transfer of electrons moving from the electron-donor to the electron-acceptor unit or vice versa, resulting in a change in the electron distribution induced by CO2 adsorption/desorption in the donor-acceptor-type charge transfer framework. Owing to the reversible electronic state change upon CO2 adsorption/desorption, these magnetic phases are switched, accompanied by modification of the electrical conductivity, which is boosted by the CO2 accommodation. This is the first example of the creation of a CO2-responsive magnet, which is promising for novel molecular multifunctional devices.

Assembly of dysprosium(III) cubanes in a metal-organic framework with an ecu topology and slow magnetic relaxation

A dysprosium(III) metal-organic framework constructed using dysprosium(III) cubanes as secondary building units has been reported to exhibit field-induced slow magnetic relaxation behavior and an unprecedented ecu topology, which is the first example of an 8-connected Ln-cubane-based framework material and a rare Dy4-MOF showing slow magnetic relaxation.

Densely Packed CO2 Aids Charge, Spin, and Lattice Ordering Partially Fluctuated in a Porous Metal-Organic Framework Magnet

Partial charge fluctuations in the charge-ordered state of a material, often triggered by structural disorders and/or defects, can significantly alter its physical characteristics, such as magnetic long-range ordering. However, it is difficult to post-chemically fix such accidental partial fluctuations to reconstruct a uniform charge-ordered state. Herein, we report CO2 -aided charge ordering demonstrated in a CO2 -post-captured layered magnet, [{Ru2 (o-ClPhCO2 )4 }2 {TCNQ(OMe)2 }] ⋅ CO2 (1⊃CO2 ; o-ClPhCO2 - =ortho-chlorobenzoate; TNCQ(OMe)2 =2,5-dimethoxy-7,7,8,8-tetracyanoquinodimethane). Pristine porous layered magnet 1 had a partially charge-fluctuated ordered state, which provided ferrimagnetic ordering at TC =65 K. Upon loading CO2 , 1 adsorbed one mole of CO2 , forming 1⊃CO2 , and raising TC to 100 K. This was because of the vanishing charge fluctuations without significantly changing the framework structure. This research illustrates the post-accessible host-guest chemistry delicately combined with charge, spin, and lattice ordering in a spongy magnet. Furthermore, it highlights how this innovative approach opens up new possibilities for technology and nanoscale magnetism manipulation.

Direct Observation of Magnetic Domain and Magnetization Reversal on Prussian Blue-Based Magnetic Films

Knowledge of the magnetic domain is indispensable for understanding the magnetostatic properties of magnets. However, to date, the magnetic domain has not yet been reported in the field of molecule-based magnets. Herein, we study the magnetic domains of molecule-based magnets. Two magnetic films of iron/chromium hexacyanidochromate FexCr1-x[Cr(CN)6]2/3·5H2O (x = 0; Film 1 and x = 0.2; Film 2) were prepared for investigation. The temperature evolution of surface magnetization was measured using magnetic force microscopy. Film 1 showed a magnetic domain below Curie temperature (TC) and its positive-magnetic polarization increased monotonously with decreasing temperature, while Film 2 showed positive magnetic polarization below TC and switches from positive to negative magnetization through a demagnetization state at 146 K. This study originally reports the temperature variation of the magnetization state at the magnetization reversal. The magnetic domains appeared as a maze pattern with an approximate domain size of one-to-several micrometers. This work shows that research on molecule-based magnets can be expanded from magnetochemistry to the magnetostatic engineering of bulk magnets, molecule-based magnetostatic engineering.

Control of electronic polarization via charge ordering and electron transfer: electronic ferroelectrics and electronic pyroelectrics

Ferroelectric, pyroelectric, and piezoelectric compounds whose electric polarization properties can be controlled by external stimuli such as electric field, temperature, and pressure have various applications, including ferroelectric memory materials, sensors, and thermal energy-conversion devices. Numerous polarization switching compounds, particularly molecular ferroelectrics and pyroelectrics, have been developed. In these materials, the polarization switching usually proceeds via ion displacement and reorientation of polar molecules, which are responsible for the change in ionic polarization and orientational polarization, respectively. Recently, the development of electronic ferroelectrics, in which the mechanism of polarization change is charge ordering and electron transfer, has attracted great attention. In this article, representative examples of electronic ferroelectrics are summarized, including (TMTTF)2X (TMTTF = tetramethyl-tetrathiafulvalene, X = anion), α-(BEDT-TTF)2I3 (BEDT-TTF = bis(ethylenedithio)-tetrathiafulvalene), TTF-CA (TTF = tetrathiafulvalene, CA = p-chloranil), and [(n-C3H7)4N][FeIIIFeII(dto)3] (dto = 1,2-dithiooxalate = C2O2S2). Furthermore, polarization switching materials using directional electron transfer in nonferroelectrics, the so-called electronic pyroelectrics, such as [(Cr(SS-cth))(Co(RR-cth))(μ-dhbq)](PF6)3 (dhbq = deprotonated 2,5-dihydroxy-1,4-benzoquinone, cth = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraaza-cyclotetradecane), are introduced. Future prospects are also discussed, particularly the development of new properties in polarization switching through the manipulation of electronic polarization in electronic ferroelectrics and electronic pyroelectrics by taking advantage of the inherent properties of electrons.

Guest-induced pore breathing controls the spin state in a cyanido-bridged framework

Iron(ii) spin cross-over (SCO) compounds combine a thermally driven transition from the diamagnetic low-spin (LS) state to the paramagnetic high-spin (HS) state with a distinct change in the crystal lattice volume. Inversely, if the crystal lattice volume was modulated post-synthetically, the spin state of the compound could be tunable, resulting in the inverse effect for SCO. Herein, we demonstrate such a spin-state tuning in a breathing cyanido-bridged porous coordination polymer (PCP), where the volume change resulting from guest-induced gate-opening and -closing directly affects its spin state. We report the synthesis of a three-dimensional coordination framework {[FeII(4-CNpy)4]2[WIV(CN)8]·4H2O}n (1·4H2O; 4-CNpy = 4-cyanopyridine), which demonstrates a SCO phenomenon characterized by strong elastic frustration. This leads to a 48 K wide hysteresis loop above 140 K, but below this temperature results in a very gradual and incomplete SCO transition. 1·4H2O was activated under mild conditions, producing the nonporous {[FeII(4-CNpy)4]2[WIV(CN)8]}n (1) via a single-crystal-to-single-crystal process involving a 7.3% volume decrease, which shows complete and nonhysteretic SCO at T1/2 = 93 K. The low-temperature photoswitching behavior in 1 and 1·4H2O manifested the characteristic elasticity of the frameworks; 1 can be quantitatively converted into a metastable HS state after 638 nm light irradiation, while the photoactivation of 1·4H2O is only partial. Furthermore, nonporous 1 adsorbed CO2 molecules in a gated process, leading to {[FeII(4-CNpy)4]2[WIV(CN)8]·4CO2}n (1·4CO2), which resulted in a 15% volume increase and stabilization of the HS state in the whole temperature range down to 2 K. The demonstrated post-synthetic guest-exchange employing common gases is an efficient approach for tuning the spin state in breathing SCO-PCPs.

Dynamical Behavior of Pure Spin Current in Organic Materials

Growing concentration on the novel information processing technology and low-cost, flexible materials make the spintronics and organic materials appealing for the future interdisciplinary investigations. Organic spintronics, in this context, has arisen and witnessed great advances during the past two decades owing to the continuous innovative exploitation of the charge-contained spin polarized current. Albeit with such inspiring facts, charge-absent spin angular momentum flow, namely pure spin currents (PSCs) are less probed in organic functional solids. In this review, the past exploring journey of PSC phenomenon in organic materials are retrospected, including non-magnetic semiconductors and molecular magnets. Starting with the basic concepts and the generation mechanism for PSC, the representative experimental observations of PSC in the organic-based networks are subsequently demonstrated and summarized, by accompanying explicit discussion over the propagating mechanism of net spin itself in the organic media. Finally, future perspectives on PSC in organic materials are illustrated mainly from the material point of view, including single molecule magnets, complexes for the organic ligands framework as well as the lanthanide metal complexes, organic radicals, and the emerging 2D organic magnets.

Permanent Porosity in the Room-Temperature Magnet and Magnonic Material V(TCNE)2

Materials that simultaneously exhibit permanent porosity and high-temperature magnetic order could lead to advances in fundamental physics and numerous emerging technologies. Herein, we show that the archetypal molecule-based magnet and magnonic material V(TCNE)₂ (TCNE = tetracyanoethylene) can be desolvated to generate a room-temperature microporous magnet. The solution-phase reaction of V(CO)₆ with TCNE yields V(TCNE)₂·0.95CH₂Cl₂, for which a characteristic temperature of T* = 646 K is estimated from a Bloch fit to variable-temperature magnetization data. Removal of the solvent under reduced pressure affords the activated compound V(TCNE)₂, which exhibits a T* value of 590 K and permanent microporosity (Langmuir surface area of 850 m²/g). The porous structure of V(TCNE)₂ is accessible to the small gas molecules H₂, N₂, O₂, CO₂, ethane, and ethylene. While V(TCNE)₂ exhibits thermally activated electron transfer with O₂, all the other studied gases engage in physisorption. The T* value of V(TCNE)₂ is slightly modulated upon adsorption of H₂ (T* = 583 K) or CO₂ (T* = 596 K), while it decreases more significantly upon ethylene insertion (T* = 459 K). These results provide an initial demonstration of microporosity in a room-temperature magnet and highlight the possibility of further incorporation of small-molecule guests, potentially even molecular qubits, toward future applications.

Self-recovering passive cooling utilizing endothermic reaction of NH4NO3/H2O driven by water sorption for photovoltaic cell

Power efficiency of photovoltaic cell is significantly affected by the cell temperature. Here, a self-recovering passive cooling unit is developed. The water-saturated zeolite 13X is coated on the back side of photovoltaic cell, and ammonium nitrate is dispersed as a layer to form a thin film. When heat is supplied, water is desorbed from zeolite 13X (latent cooling), and dissolves ammonium nitrate to induce endothermic reaction cooling. It is a reversible process that recovers itself at night. The unit works on the basis that the water sorption performance of porous materials is inversely proportional to temperature, and the solubility of endothermic reaction pairs increases proportionally with temperature. The average temperature of photovoltaic cell can be reduced by 15.1 °C, and the cooling energy density reaches 2,876 kJ/kg with average cooling power of 403 W/m². We show that highly efficient passive cooling comprising inexpensive materials for photovoltaic cell could be achieved.

Ho-Ion-Polymer/Graphene Heterojunctions Toward Room-Temperature Ferromagnets

Organic ferromagnetic materials offer great promise for spintronic devices, carbon-based chips, and quantum communications, but remain as a challenging issue due to their low saturation magnetization and/or unsustainable ferromagnetic properties. To date, magnetic ion polymers have displayed paramagnetism without exception at room-temperature. In this study, it is reported for the first time that, owing to the structural restriction and charge exchange of Ho ion by polymer/graphene π-π stacking heterojunctions, holmium ion polymer composites exhibited typical hysteresis lines of ferromagnetic materials at room temperature. The room-temperature ferromagnetic ion polymer composite presented the highest saturation magnetization value of 3.36 emu g^-1 and unprecedented sustainable ferromagnetism, compared to reported room-temperature organic ferromagnetic materials. Accordingly, prepared ferromagnetic composites also achieved impressive wave absorption properties, with a maximum reflection loss of as much as -57.32 dB and a broad absorption bandwidth of 5.05 GHz. These findings may promote the development of room-temperature organic ferromagnetic materials.

Homo-valent diruthenium(II,II) carbonates Na4[Ru2(CO3)4]·10H2O: synthesis, structure, properties, and calculation

Homo-valent diruthenium(II,II) carbonates have been underexplored hitherto. This paper reports the synthesis and crystal structure of a diruthenium(II,II) compound, Na₄Ru₂(CO₃)₄·10H₂O (1). It has a two-dimensional structure in which the paddle-wheel diruthenium units of Ru₂(CO₃)₄^4- are cross-linked through the carbonate groups. The investigation of the primary magnetic properties and theoretical studies with density functional theory (DFT) reveal that weak antiferromagnetic interactions are propagated between the Ru₂ units which contain two unpaired electrons in an electron configuration σ²π⁴δ²π*²δ*² with a ground state S = 1. According to Raman spectrum measurements combined with theoretical calculations, the strong peak at 356 cm^-1 in the small-wavenumber region was assigned to the stretching of the Ru-Ru double bonds.

Inter-layer magnetic tuning by gas adsorption in π-stacked pillared-layer framework magnets

Magnetism of layered magnets depends on the inter-layer through-space magnetic interactions (J NNNI). Using guest sorption to address inter-layer pores in bulk-layered magnets is an efficient approach to magnetism control because the guest-delicate inter-layer distance (l trans) is a variable parameter for modulating J NNNI. Herein, we demonstrated magnetic changes induced by the adsorption of CO2, N2, and O2 gases in various isostructural layered magnets with a π-stacked pillared-layer framework, , (M = Co, 1, Fe, 2, Cr, 3; Cp* = η5-C5Me5; 2,3,5,6-F4PhCO2 - = 2,3,5,6-tetrafluorobenzoate; TCNQ = 7,7,8,8-tetracyano-p-quinodimethane). Each compound had almost identical adsorption capability for the three types of gases; only CO2 adsorption was found to have a gated profile. A breathing-like structural modulation involving the extension of l trans occurred after the insertion of gases into the isolated pores between the [Ru2]2-TCNQ ferrimagnetic layers, which is more significant for CO2 than for O2 and N2, due to the CO2-gated transition. While adsorbent 1 with M = Co (S = 0) was an antiferromagnet with T N = 75 K, 1⊃CO2 was a ferrimagnet with T C = 76 K, whereas 1⊃N2 and 1⊃O2 were antiferromagnets with T N = 68 K. The guest-insertion effect was similarly confirmed in 2 and 3, and was characteristically dependent on the type of sandwiched spin in as M = Fe (S = 1/2) and Cr (S = 3/2), respectively. This study reveals that common gases such as CO2, O2, and N2 can serve as crucial triggers for the change in magnetism as a function of variable parameter l trans.

Structural Transformable Coulomb Lattice of n-Type Semiconductors for Guest Sorption

In recent years, highly designable organic porous materials have attracted considerable attention in the development of new types of molecular adsorption-desorption materials. The adsorption-desorption process also changes the electronic structure via the existence of guest molecules. Therefore, it is possible to change the physical property during the guest adsorption-desorption cycle using an appropriate chemical design of the host crystal lattice. As the development of n-type organic semiconductors has been limited, we focused on designing an n-type organic semiconductor material to control the host crystal lattice, electronic dimensionality, chemical stability, and high electron mobility using an ionic naphthalenediimide (NDI) derivative. Low symmetrical dianionic bis(benzene-m-sulfonate)-naphthalenediimide (m-BSNDI^2-) forms various types of single-crystal (M⁺)₂(m-BSNDI^2-)·n(guest) with a combination of M⁺ = Na⁺, K⁺, Rb⁺, and guest = H₂O, CH₃OH. Four crystals of (K⁺)₂(m-BSNDI^2-)·n(H₂O), (K⁺)₂(m-BSNDI^2-)·n(CH₃OH), α-(K⁺)₂(m-BSNDI^2-), and β-(K⁺)₂(m-BSNDI^2-) were transformable using the guest adsorption-desorption cycle. Two kinds of single-crystal (K⁺)₂(m-BSNDI^2-)·n(CH₃OH) with n = 0 and 2.0 showed a single-crystal to single-crystal (SCSC) transformation through CH₃OH desorption. On the contrary, five kinds of single crystals with n = 0, 3.0, 3.3, 4.75, and 5.5 were identified in the single-crystal X-ray structural analyses of (K⁺)₂(m-BSNDI^2-)·n(H₂O). Systematic change of the ionic radii in (M⁺)₂(m-BSNDI^2-) modified the crystal lattice flexibility for the guest adsorption-desorption cycles.

Magnetic and Dielectric Switchings Actuated by the Rotation of the Picoline Ligand in an Iron-Based Dinuclear Phase-Transition Complex

Multifunctional materials with switchable magnetic and dielectric properties are crucial for the development of memory and sensor devices. Herein, we report a methoxy-bridged dinuclear iron-pyridyl complex [Fe₂(4-picoline)₄(NCS)₄(μ-OCH₃)₂] (1), which shows simultaneous thermal-induced magnetic and dielectric switchings. Within the phase-transition temperature range, both magnetic switching and the dielectric anomaly were detected, in which the thermal hysteresis loops were 23 and 21 K, respectively. Detailed structural analyses revealed that these simultaneous switchings were rooted in the flexible rotatable ligands, which were actuated by readjusting the π-π intermolecular interactions between the pyridine ligands in the trans positions of the metal centers. These results were comprehensively investigated both experimentally and theoretically. This study presents a new guideline to control both the magnetic and dielectric properties of molecular complexes by external stimuli.

Open metal site (OMS)-inspired investigation of adsorption and catalytic functions in a porous metal-organic framework (MOF)

In this article, we report the adsorption and catalytic study of the three-dimensional (3D) metal-organic framework (MOF) {Mn₂(1,4-bdc)₂(DMF)₂} (1) (1,4-bdcH₂, 1,4-benzene dicarboxylic acid; DMF, N,N-dimethylformamide) together with the synthesis and structure of two new Mn(II)-MOFs {Mn₃(Br-bdc)₃(DMF)₄} (2) and {Mn₃(NO₂-bdc)₃(DMF)₄} (3) (Br-bdcH₂, 2-bromo-1,4-benzene dicarboxylic acid; NO₂-bdcH₂, 2-nitro-1,4-benzene dicarboxylic acid) under solvothermal conditions. Compounds 2 and 3 have two-dimensional (2D) extended structures and feature trimeric {Mn₃(CO₂)₆} units that serve as secondary building units for the frameworks. The desolvated compound of 1, denoted as 1', having potential Mn(II) open metal sites (OMSs) lined in a one-dimensional (1D) Mn-chain interconnected by carboxylate groups, exhibits guest-selective adsorption of solvent vapours wherein the compound shows a stepwise profile with H₂O vapour, while a gated isotherm was recorded with MeOH. After realizing the favourable interaction of 1' with polar solvent molecules, we have used Mn(II) OMSs in 1' for efficient cyanosilylation reactions of aromatic aldehydes. We have recorded 100% conversion for eight aromatic aldehydes, while several other aldehydes showed appreciable conversion. Notably, the recorded conversions in the case of many substrates are higher than those for many other reported MOF catalysts.

Air oxidation-induced single-crystal-to-single-crystal transformation of mixed-valence tetranuclear Fe(II)-Fe(III) complexes

A mixed valence tetranuclear iron complex [(Hpmide)Fe^II(NCSe)₂Fe^III(pmide)]₂·5CH₃OH (1) underwent oxidation and ligand exchange in the solid state (H₂pmide = N-(2-pyridylmethyl)iminodiethanol). Upon air oxidation, 1 was converted into [(pmide)Fe^III(NCSe)Fe^III(pmide)]₂(NCSe)₂·2H₂O (2), which was accompanied by deprotonation and ligand exchange through a single crystal-to-single-crystal transformation.

Vapor-Induced Conversion of a Centrosymmetric Organic-Inorganic Hybrid Crystal into a Proton-Conducting Second-Harmonic-Generation-Active Material

Chemical responsivity in materials is essential to build systems with switchable functionalities. However, polarity-switchable materials are still rare because inducing a symmetry breaking of the crystal structure by adsorbing chemical species is difficult. In this study, we demonstrate that a molecular organic-inorganic hybrid crystal of (NEt₄)₂[MnN(CN)₄] (1) undergoes polarity switching induced by water vapor and transforms into a rare example of proton-conducting second-harmonic-generation-active material. Centrosymmetric 1 transforms into noncentrosymmetric polar 1·3H₂O and 1·MeOH by accommodating water and methanol molecules, respectively. However, only water vapor causes a spontaneous single-crystal-to-single-crystal transition. Moreover, 1·3H₂O shows proton conduction with 2.3 × 10^-6 S/cm at 298 K and a relative humidity of 80%.

Photoinduced Phase Transition of Ce-UiO-66 to Ce-BDC-OH

External stimuli-responsive phase transition of metal-organic frameworks (MOFs) introduces intriguing functions for diverse applications under practical settings. Herein, we reported a phase transition from cubic Ce-UiO-66 to triclinic Ce-BDC-OH under light irradiation. Such a phase transition underwent a ligand-to-metal charge transfer process, which was unambiguously revealed by Fourier transform infrared spectroscopy, nuclear magnetic resonance, electron paramagnetic resonance, etc. We proposed a phase transition mechanism through (1) the photoreduction of the metal core from Ce4+ into Ce3+; (2) the photogeneration of •OH and hydroxylation of BDC into BDC-OH; and (3) the carboxylate migration and lattice rearrangement for transitions. The phenomenon of the Ce4+-to-Ce3+ reduction also enables a diamagnetism-to-paramagnetism transition, suggesting its potential as a photostimulus-responsive magnetic switch.

Chemical pressure in functional materials

Chemical pressure, a strange but familiar concept, is a lattice internal force caused by lattice strain with chemical modifications and arouses great interest due to its diversity and efficiency to synthesize new compounds and tune functional materials. Different from physical pressure loaded by an external force that is positive, chemical pressure can be either positive or negative (contract a lattice or expand it), often through flexible and mild chemical synthesis strategies, which are particularly important as a degree of freedom to manipulate material behaviors. In this tutorial review, we summarize the features of chemical pressure as a methodology and demonstrate its role in synthesizing and discovering some typical magnetically, electrically, and thermally responsive functional materials. The measure of chemical pressure using experimental lattice strain and elastic modulus was proposed, which can be used for quantitative descriptions of the correlation between lattice distortion and properties. From a lattice strain point of view, we classify chemical pressure into different categories: (i) chemical substitution, (ii) chemical intercalation/de-intercalation, (iii) size effect, and (iv) interface constraint, etc. Chemical pressure affects chemical bonding and rationalizes the crystal structure by modifying the electronic structure of solids, regulating the lattice symmetry, local structure, phonon structure effects etc., emerging as a general and effective method for synthesizing new compounds and tuning functional materials.

Multiple MMCT properties of the diruthenium-based cyanido-bridged complex RuVI2-NC-RuII-CN-RuVI2

The diruthenium-based linear mixed valence complex trans-[Ru₂(ap)₄-NC-Ru(DMAP)₄-CN-Ru₂(ap)₄][PF₆]₂ (12+[PF6]2) (ap = 2-anilinopyridinate, DMAP = 4-dimethylaminopyridine) and its two-electron oxidation product 14+[PF6]4 have been synthesized and fully characterized. The investigation reveals that complex 12+ displays a single MMCT transition, whereas complex 14+ has three identified MMCT transitions (MMCT-1, MMCT-2 and MMCT-3) upon oxidation. Interestingly, MMCT-2 in complex 14+ might result from the transition from the Ru^III-NC-Ru^II-CN-Ru^III component, which is composed of the central Ru^II and its two neighboring Ru^III atoms from the cluster RuVI2 units, to both the terminal Ru^III atoms of the same cluster RuVI2 units, which is supported by the TDDFT calculations.

A spin-crossover framework endowed with pore-adjustable behavior by slow structural dynamics

Host-guest interactions play critical roles in achieving switchable structures and functionalities in porous materials, but design and control remain challenging. Here, we report a two-dimensional porous magnetic compound, [Fe^II(prentrz)₂Pd^II(CN)₄] (prentrz = (1E,2E)−3-phenyl-N-(4H-1,2,4-triazol-4-yl)prop-2-en-1-imine), which exhibits an atypical pore transformation that directly entangles with a spin state transition in response to water adsorption. In this material, the adsorption-induced, non-uniform pedal motion of the axial prentrz ligands and the crumpling/unfolding of the layer structure actuate a reversible narrow quasi-discrete pore (nqp) to large channel-type pore (lcp) change that leads to a pore rearrangement associated with simultaneous pore opening and closing. The unusual pore transformation results in programmable adsorption in which the lcp structure type must be achieved first by the long-time exposure of the nqp structure type in a steam-saturated atmosphere to accomplish the gate-opening adsorption. The structural transformation is accompanied by a variation in the spin-crossover (SCO) property of Fe^II, i.e., two-step SCO with a large plateau for the lcp phase and two-step SCO with no plateau for the nqp phase. The unusual adsorption-induced pore rearrangement and the related SCO property offer a way to design and control the pore structure and physical properties of dynamic frameworks.

Host-guest interactions can play a critical role in achieving switchable porous materials, but controlling them remains challenging. Here the authors report an atypical pore rearrangement in a magnetic 2D porous framework upon water adsorption; the structural transformation affects the magnetic properties of the material.

Two-Dimensional Negative Thermal Expansion in a Facile and Low-Cost Oxalate-Based Metal-Organic Framework

Two-dimensional negative thermal expansion (NTE) is achieved in a tetragonal oxalate-based metal-organic framework (MOF), CdZrSr(C₂O₄)₄, within a temperature range from 123 to 398 K [space group I4̅m2, α_a = -2.4(7) M K^-1, α_c = 11.3(3) M K^-1, and α_V = 6.4(1) M K^-1]. By combining variable-temperature X-ray diffraction, a high-resolution synchrotron X-ray pair distribution function, and thermogravimetry-differential scanning calorimetry, we shows that NTE within the ab plane derives from the oriented rotation of an oxalate ligand in zigzag chains (-CdO₈-ox-ZrO₈-ox-)_∞. That is simplified to the Zr atom rotating with an unchanged Zr···Cd distance as the radius, which also gives rise to the deformation of a hingelike connection along the c axis and results in its positive thermal expansion. By virtue of the facile and low-cost oxalate ligand, the present NTE MOF may show application prospects in the future.

Hydrogen-Bonded Framework of a Cobalt(II) Complex Showing Superior Stability and Field-Induced Slow Magnetic Relaxation

A unique hydrogen-bonded organic-inorganic framework (HOIF) constructed from a mononuclear cobalt(II) complex, [Co(MCA)₂·(H₂O)₂] (HMCA = 4-imidazolecarboxylic acid), via multiple hydrogen-bonding interactions was synthesized and structurally characterized. The Co(II) center in the HOIF features a highly distorted octahedral coordination environment. Remarkably, the Co^II HOIF showed permanent porosity with superior stability as established by combined thermogravimetric analysis (TGA), variable-temperature infrared spectra (IR), variable-temperature powder X-ray diffraction data (PXRD), and a CO₂ isotherm. Structural studies reveal that short multiple hydrogen bonds should be responsible for the superior thermal and chemical stability of a HIOF. Magnetic investigations reveal the large easy-plane magnetic anisotropy of the Co²⁺ ions with the fitted D values being 22.1 (magnetic susceptibility and magnetization data) and 29.1 cm^-1 (reduced magnetization data). In addition, the HOIF exhibits field-induced slow magnetic relaxation at low temperature with an effective energy barrier of U_eff = 45.2 cm^-1, indicative of a hydrogen-bonded framework single-ion magnet of the compound. The origin of the significant magnetic anisotropy of the complex was also understood from computational studies. In addition, BS-DFT calculations indicate that the superexchange interactions between the neighboring Co^II ions are non-negligible antiferromagnetism with J_Co-Co = -0.5 cm^-1. The foregoing results provide not only a carboxylate-imidazole ligand approach toward a stable HOIF but also a promising way to build a robust single-ion magnet via hydrogen-bond interactions.

Gating effect for gas adsorption in microporous materials-mechanisms and applications

In the past two decades, various microporous materials have been developed as useful adsorbents for gas adsorption for a wide range of industries. Considerable efforts have been made to regulate the pore accessibility in microporous materials for the manipulation of guest molecules' admission and release. It has long been known that some microporous adsorbents suddenly become highly accessible to guest molecules at specific conditions, e.g., above a threshold pressure or temperature. This anomalous adsorption behavior results from a gating effect, where a structural variation of the adsorbent leads to an abrupt change in the gas admission. This review summarizes the mechanisms of the gating effect, which can be a result of the deformation of the framework (e.g., expansion, contraction, reorientation, and sliding of the unit cells), the vibration of the pore-keeping groups (e.g., rotation, swing, and collapse of organic linkers), and the oscillation of the pore-keeping ions (e.g. cesium, potassium, etc.). These structural variations are induced either by the host-guest interaction or by an external stimulus, such as temperature or light, and account for the gating effect at a threshold value of the stimulus. Emphasis is given to the temperature-regulated gating effect, where the critical admission temperature is dictated by the combined effect of the gate opening and thermodynamic factors and plays a key role in regulating guest admission. Molecular simulations can improve our understanding of the gate opening/closing transitions at the atomic scale and enable the construction of quantitative models to describe the gated adsorption behaviour at the macroscale level. The gating effect in porous materials has been widely applied in highly selective gas separation and offers great potential for gas storage and sensing.

Tuning chain topologies and magnetic anisotropy in one-dimensional cobalt(II) coordination polymers via distinct dicarboxylates

Based on a terpyridine derivative and two different dicarboxylate ligands, two new cobalt(II) coordination polymers, namely [Co(pytpy)(DClbdc)]n (1) and [Co(pytpy)(ndc)]n (2) (pytpy = 4'-(4-Pyridyl)-2,2':6',2''-terpyridine, H2DClbc = 2,5-Dichloroterephthalic acid, and H2ndc...

Role of intramolecular hydrogen bonding in the redox chemistry of hydroxybenzoate-bridged paddlewheel diruthenium(II,II) complexes

The synthesis of a series of trans-heteroleptic paddlewheel diruthenium(II,II) complexes with various hydroxy-substituted benzoate ligands, [Ru₂((OH)_xPhCO₂)₂(2,6-(CF₃)₂PhCO₂)₂(THF)₂] ([RuII,II2]) as tetrahydrofuran (THF) adducts is reported, where (OH)_xPhCO₂^- stands for o-hydroxybenzoate (o-OH), m-hydroxybenzoate (m-OH), p-hydroxybenzoate (p-OH), 2,3-dihydroxybenzoate (2,3-(OH)2), 2,4-dihydroxybenzoate (2,4-(OH)2), 2,5-dihydroxybenzoate (2,5-(OH)2), 2,6-dihydroxybenzoate (2,6-(OH)2), or 3,4-dihydroxybenzoate (3,4-(OH)2), and 2,6-(CF₃)₂PhCO₂^- represents 2,6-bis(trifluoromethyl)benzoate. In this heteroleptic series, the redox potential (E_1/2) of the [RuII,II2]/[RuII,III2]⁺ couple in THF varies over a wide range, from -18 mV (vs. Ag/Ag⁺) for p-OH to 432 mV for 2,6-(OH)2. The redox properties are linearly dependent on the acidity (pK_a) of the OH-substituted benzoic acids, but do not depend on the number of ortho-substituted hydroxy (o-OH) groups. This indicates that the steric effect of o-substituents is irrelevant in the case of hydroxyl groups, owing to the formation of intramolecular hydrogen bonds between the o-OH group and carboxylate oxygens. The value of the Hammett constant σ_o for the o-OH substituent was determined to be 0.667, indicating a strongly electron-withdrawing character, contrary to the expectation of electron-donating character for an OH group. The redox properties of the compounds were well explained in a framework of Hammett analyses and were also consistent with their HOMO energy levels evaluated by DFT calculations based on the atomic coordinates. The unexpected electron-withdrawing character of the o-OH groups could be attributed to the direct effect of intramolecular hydrogen bonding on the charge density on the carboxylate oxygen.

Tuning the structure and magnetic properties via distinct pyridine derivatives in cobalt(II) coordination polymers

Precise modulation of the structure and magnetic properties of coordination compounds is of great importance in the development of framework magnetic materials. Herein, we report that the coordination self-assembly of a neutral cobalt(II) magnetic building block and selective pyridine derivatives as organic linkers has led to two distinct cobalt(II) coordination polymers, {Co(DClQ)₂(bpy)}_n (1) and {Co₂(DClQ)₄(tpb)}_n (2) (DClQ = (5,7-dichloro-8-hydroxyquinoline; bpy = 4, 4'-dipyridine; tpb = 1,2,4,5-tetra(4-pyridyl)benzene)). Structural analyses revealed that 1 and 2 are one-dimensional (1D) and 2D coordination polymers containing the same neutral magnetic building block [Co(DClQ)₂] bridged by bitopic bpy and tetratopic tpb ligands, respectively. Both the complexes have a distorted octahedral CoN₄O₂ coordination geometry around each cobalt center offered by the bidentate ligand and organic linkers. Magnetic studies reveal large easy-plane and easy-axis magnetic anisotropy for 1 and 2, respectively. However, because of the weak antiferromagnetic coupling between the bpy-bridged Co^II centers, no slow relaxation of the magnetization was observed in 1 under both zero or applied dc fields. Interestingly, complex 2 exhibits slow magnetic relaxation under external fields, indicative of a framework single-ion magnet of 2. Theoretical calculations further support the experimental results and unveil that the D values are +65.3 and -91.2 cm^-1 for 1 and 2, respectively, while the magnetic exchange interaction was precisely estimated as -0.16 (1) and -0.009 (2) cm^-1. The foregoing results show that the structural dimensionality and magnetic properties can be rationally modified via pre-designed magnetic building blocks and a suitable choice of organic bridging ligands.

Ultrasound-assisted synthesis of water-soluble monosubstituted diruthenium compounds

The elusive monosubstituted diruthenium complexes [Ru₂Cl(DAniF)(O₂CMe)₃] (1), [Ru₂Cl(DPhF)(O₂CMe)₃] (2), [Ru₂Cl(D-p-CNPhF)(O₂CMe)₃] (3), [Ru₂Cl(D-o-TolF)(O₂CMe)₃] (4), [Ru₂Cl(D-m-TolF)(O₂CMe)₃] (5), [Ru₂Cl(D-p-TolF)(O₂CMe)₃] (6) and [Ru₂Cl(p-TolA)(O₂CMe)₃] (7) have been synthesized using for the first time ultrasound-assisted synthesis to carry out a substitution reaction in metal-metal bonded dinuclear compounds (DAniF^- = N,N'-bis(4-anisyl)formamidinate; DPhF^- = N,N'-diphenylformamidinate; D-p-CNPhF^- = N,N'-bis(4-cyanophenyl)formamidinate; D-o/m/p-TolF^- = N,N'-bis(2/3/4-tolyl)formamidinate; p-TolA^- = N-4-tolylamidate). This is a simpler and greener method than the tedious procedures described in the literature, and it has permitted to obtain water-soluble complexes with good yields in a short period of time. A synthetic study has been implemented to find the best experimental conditions to prepare compounds 1-7. Two different types of ligands, formamidinate and amidate, have been used to check the generality of the method for the preparation of monosubstituted complexes. Five new compounds (2-6) have been obtained using a formamidinate ligand, the synthesis of the previously described compound 1 has been improved, and an unprecedented monoamidate complex has been achieved (7). The crystal structures of compounds 3 and 7 have been solved by single crystal X-ray diffraction. These compounds show the typical paddlewheel structure with three acetate ligands and one formamidinate (3) or amidate (7) bridging ligand at the equatorial positions. The axial positions are occupied by the chloride ligand giving rise to one-dimensional polymer structures that were previously unknown for monosubstituted compounds.

Giant single-crystal-to-single-crystal transformations associated with chiral interconversion induced by elimination of chelating ligands

Numerous single crystals that exhibit single-crystal-to-single-crystal (SCSC) transformations have been reported, and some of them show great promise for application to advanced adsorption materials, magnetic switches, and smart actuators. However, the development of single crystals with super-adaptive crystal lattices capable of huge and reversible structural change remains a great challenge. In this study, we report a Zn^II complex that undergoes giant SCSC transformation induced by a two-step thermal elimination of ethylene glycol chelating ligands. Although the structural change is exceptionally large (50% volume shrinkage and 36% weight loss), the single-crystal nature of the complex persists because of the multiple strong hydrogen bonds between the constituent molecules. This allows the reversible zero-dimensional to one-dimension and further to three-dimensional structural changes to be fully characterized by single-crystal X-ray diffraction analyses. The elimination of chelating ligands induces a chiral interconversion in the molecules that manifests as a centric-chiral-polar symmetric variation of the single crystal. The study not only presents a unique material, featuring both a periodic crystal lattice and gel-like super-ductility, but also reveals a possible solid-state reaction method for preparing chiral compounds via the elimination of chelating ligands.

Design of Persistent and Stable Porous Radical Polymers by Electronic Isolation Strategy

Conjugated organic radical polymers with stable radical features are difficult to design because the π conjugation in the polymer backbones makes the radicals readily delocalize and tend to undergo covalent bonding processes. In this work, we report an electronic isolation strategy to design stable porous radical polymers by homocoupling reaction from a meta-position active monomer. The meta linkage ensures less conjugation in the polymer skeletons, localizes the resonant radicals, and prevents them from recombination. The resulting porous radical polymer exhibits exceptional radical characters with ultralow band gap of 0.68 eV, strong yet extended UV/Vis-NIR absorption up to 1800 nm, and high spin density. The above features make the polymer very promising in the photothermal conversion with record-high photothermal temperature increment of ≈∼240 °C and striking solar-driven water evaporation efficiency of 96.8 %. Our results demonstrate the feasibility of electronic isolation of radicals for producing outstanding photothermal materials.

Large breathing effect induced by water sorption in a remarkably stable nonporous cyanide-bridged coordination polymer

While metal-organic frameworks (MOFs) are at the forefront of cutting-edge porous materials, extraordinary sorption properties can also be observed in Prussian Blue Analogs (PBAs) and related materials comprising extremely short bridging ligands. Herein, we present a bimetallic nonporous cyanide-bridged coordination polymer (CP) {[Mn(imH)]2[Mo(CN)8]} n (1Mn; imH = imidazole) that can efficiently and reversibly capture and release water molecules over tens of cycles without any fatigue despite being based on one of the shortest bridging ligands known - the cyanide. The sorption performance of {[Mn(imH)]2[Mo(CN)8]} n matches or even outperforms MOFs that are typically selected for water harvesting applications with perfect sorption reversibility and very low desorption temperatures. Water sorption in 1Mn is possible due to the breathing effect (accompanied by a dramatic cyanide-framework transformation) occurring in three well-defined steps between four different crystal phases studied structurally by X-ray diffraction structural analysis. Moreover, the capture of H2O by 1Mn switches the EPR signal intensity of the MnII centres, which has been demonstrated by in situ EPR measurements and enables monitoring of the hydration level of 1Mn by EPR. The sorption of water in 1Mn controls also its photomagnetic behavior at the cryogenic regime, thanks to the presence of the [MoIV(CN)8]4- photomagnetic chromophore in the structure. These observations demonstrate the extraordinary sorption potential of cyanide-bridged CPs and the possibility to merge it with the unique physical properties of this class of compounds arising from their bimetallic character (e.g. photomagnetism and long-range magnetic ordering).

High Loading of Air-Sensitive Guest Molecules into Polycrystalline Metal-Organic Framework Hosts

Loading air-sensitive guest molecules inside polycrystalline metal-organic framework (MOF) hosts is currently a challenging process. In this study, the air-sensitive guest molecule magnesocene (MgCp₂) was loaded into two porous MOF hosts, polycrystalline Ni-MOF-74 and NH₂-MIL-101(Al), using a gas-phase infiltration process. X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning transmission electron microscopy, and scanning transmission electron microscopy-energy-dispersive X-ray mapping measurements demonstrated that MgCp₂ was successfully loaded inside the three-dimensional pores of NH₂-MIL-101(Al) with a maximum loading of 43.1 wt %. MgCp₂ was found to cover the outside of Ni-MOF-74 owing to the small one-dimensional channels.

Cobalt(II)-dianthracene Frameworks: Assembly, Exfoliation and Properties

Metal-organic frameworks containing responsive organic linkers are attractive for potential applications in sensors and molecular devices. Herein we report three cobalt(II) phosphonates incorporating responsive dianthracene linkers, namely, Co₂ (amp₂ H₂ )₂ (H₂ O)₄  ⋅ 6H₂ O (MDAF-1), Co₂ (amp₂ )(H₂ O)₄  ⋅ 2H₂ O (MDAF-2) and Co(amp₂ H₂ ) ⋅ 2H₂ O ⋅ 0.5DMF (MDAF-3), where amp₂ H₄ is pre-photodimerized 9-anthrylmethylphosphonic acid. MDAF-1 shows a layer structure in which dinuclear Co₂ (PO₃ H)₂ units are inter-connected by dianthracene ligands. In MDAF-2 and MDAF-3, inorganic chains of corner-sharing {CoO₄ } (or {CoO₆ }) and {PO₃ C} are cross-linked by dianthracene ligands into 3D frameworks. All compounds underwent thermo-induced phase transitions, first the de-solvation and then the de-dimerization of dianthracene (as well as the release of the remaining solvent molecules for MDAF-2 and -3), associated with magnetic changes. MDAF-1 can be exfoliated into single-layer nanosheets in water which show light-triggered luminescent changes.

Guest-selective and reversible magnetic phase switching in a pseudo-pillared-layer porous magnet

A novel porous magnet consisting of cationic two-dimensional (2-D) layers extended by Fe^III-CN-Ni^II linkages and pseudo-pillar dianions was synthesized. The size-selective guest adsorption behaviour of water and methanol molecules originates from the narrow bottle-neck-type pores in the flexible pseudo-pillared-layer structure, which results in the switching of the magnetic phases from antiferromagnetic to ferromagnetic, involving significant changes in the interlayer distance.

Magnet Creation by Guest Insertion into a Paramagnetic Charge-Flexible Layered Metal-Organic Framework

Changing nonmagnetic materials to spontaneous magnets is an alchemy-inspiring concept in materials science; however, it is not impossible. Here, we demonstrate chemical modification from a nonmagnet to a bulk magnet of either a ferrimagnet or antiferromagnet, depending on the adsorbed guest molecule, in an electronic-state-flexible layered metal-organic framework, [{Ru₂(2,4-F₂PhCO₂)₄}₂TCNQ(EtO)₂] (1; 2,4-F₂PhCO₂^- = 2,4-difluorobenzoate; TCNQ(EtO)₂ = 2,5-diethoxy-7,7,8,8-tetracyanoquinodimethane). The guest-free paramagnet 1 undergoes a thermally driven intralattice electron transfer involving a structural transition at 380 K. This charge modification can also be implemented by guest accommodations at room temperature; 1 adsorbs several organic molecules, such as benzene (PhH), p-xylene (PX), 1,2-dichloroethane (DCE), dichloromethane (DCM), and carbon disulfide (CS₂), forming 1-solv with intact crystallinity. This induces an intralattice electron transfer to produce a ferrimagnetically ordered magnetic layer. According to the interlayer environment tuned by the corresponding guest molecule, the magnetic phase is consequently altered to a ferrimagnet for the guests PhH, PX, DCE, and DCM or an antiferromagnet for CS₂. This is the first demonstration of the postsynthesis of bulk magnets using guest-molecule accommodations.

A Rare 2D Framework Cu(atz)2 with Ferrimagnetic and High Proton Conductivity

Materials combining proton conductivity and magnetism have attracted great attention in recent years due to their intriguing application in sensors and fuel cells. Herein a two-dimensional metal-organic framework, [Cu(atz)₂ (H₂ O)₂ ]⋅H₂ O (1) (Hatz=5-aminotetrazole), has been obtained in a green synthesis method. The single-crystal structure revealed that the atz^- ligands as linkers coordinate with copper ions to sql networks, between which water molecules are immobilized through hydrogen bonds. The resulting complex 1 exhibits a high proton conductivity of 1.11×10^-4 and 6.19×10^-4  S cm^-1 at room temperature and 333 K, respectively, under 98% RH with an activation energy of 0.56 eV. Upon dehydration, the proton conductivity of 1_dg drops by an order of magnitude. Furthermore, the magnetic behavior changes from long-range ferrimagnetic ordering of 1 to canted antiferromagnetic behaviour of 1_dg.

An Open-shell, Luminescent, Two-Dimensional Coordination Polymer with a Honeycomb Lattice and Triangular Organic Radical

The use of organic radicals as building blocks is an effective approach to the production of open-shell coordination polymers (CPs). Two-dimensional (2D) CPs with honeycomb spin-lattices have attracted attention because of the unique electronic structures and physical properties afforded by their structural topology. However, radical-based CPs with honeycomb spin-lattices tend to have low chemical stability or poor crystallinity, and thus novel systems with high crystallinity and persistence are in strong demand. In this study, a novel triangular organic radical possessing three pyridyl groups, tris(3,5-dichloro-4-pyridyl)methyl radical (trisPyM) was prepared. It exhibits luminescence, high photostability, and a coordination ability, allowing formation of defined and persistent 2D CPs. Optical measurements confirmed the luminescence of trisPyM both in solution and in the solid state, with emission wavelengths, λ_em, of 665 and 700 nm, respectively. trisPyM exhibits better chemical stability under photoirradiation than other luminescent radicals: the half-life of trisPyM in CH₂Cl₂ was 10 000 times that of the tris(2,4,6-trichlorophenyl)methyl radical (TTM), a conventional luminescent radical. Complexation between trisPyM and Zn^II(hfac)₂ yielded a single crystal of a 2D CP trisZn, possessing a honeycomb lattice with graphene-like spin topology. The coordination structure of trisZn is stable under evacuation at 60 °C. Moreover, trisZn exhibits luminescence at 79 K, with λ_em = 695 nm, and is a rare example of a luminescent material among 2D radical-based CPs. Our results indicate that trisPyM may be a promising building block in the construction of a new class of 2D honeycomb CPs with novel properties, including luminescence.