Electric-field-driven dual-functional molecular switches in tunnel junctions

An enzymolysis-induced energy transfer co-assembled system for spontaneously recoverable supramolecular dynamic memory

The continuing growth of the digital world requires new ways of constructing memory devices to process and store dynamic data, because the current ones suffer from inefficiency, limited reads, and difficulty to manufacture. Here we propose a supramolecular dynamic memory (SDM) strategy based on an enzymolysis-induced energy transfer co-assembly derived from a naphthalene-based cationic monomer and organic dye sulforhodamine 101, enabling the construction of spontaneously recoverable dynamic memory devices. Benefitting from the large exciton migration rate (4.48 × 1015 L mol-1 s-1) between the monomer and sulforhodamine 101, the energy transfer process between the two is effectively achieved. Since alkaline phosphatase can selectively hydrolyze adenosine triphosphate, leading to the disruption of the co-assemblies, an enzyme-mediated time-dependent fluorochromic system is realized. On this basis, a SDM system featuring spontaneous recovery and enabling the memory of dynamic information in optical and electrical modes is successfully constructed. The current study represents a promising step in the nascent development of supramolecular materials for computational systems.

Molecular Diodes Induced by a Schottky Barrier with a Gold-Silicon Doped Electrode

To create complementary metal oxide semiconductor compatible molecular devices, more insights into the electrode property regarding its metal/semiconductor doping level and creating a functional molecular device are required. In this work, we constructed an EGaIn/alkanethiol/Au-Si molecular diode (with a rectification ratio R of 50.70) induced by Schottky barriers within a gold-silicon doped electrode instead of the functional property of molecules. The relationship between the rectification ratio and the number of methylene units in alkanethiol was analyzed, revealing a gradual increase in the ratio from 3.33 for C6H14S to 50.70 for C16H34S. The rectification ratio of the junction is well modulated by the temperature due to the change in the Schottky barrier. Such a mechanism is explained by the energy band diagrams of the surface space charge region and a combination of density functional theory and Keldysh-Green formalism calculations.

Toward Practical Single-Molecule/Atom Switches

Electronic switches have been considered to be one of the most important components of contemporary electronic circuits for processing and storing digital information. Fabricating functional devices with building blocks of atomic/molecular switches can greatly promote the minimization of the devices and meet the requirement of high integration. This review highlights key developments in the fabrication and application of molecular switching devices. This overview offers valuable insights into the switching mechanisms under various stimuli, emphasizing structural and energy state changes in the core molecules. Beyond the molecular switches, typical individual metal atomic switches are further introduced. A critical discussion of the main challenges for realizing and developing practical molecular/atomic switches is provided. These analyses and summaries will contribute to a comprehensive understanding of the switch mechanisms, providing guidance for the rational design of functional nanoswitch devices toward practical applications.

Fano resonance in molecular junctions of spin crossover complexes

In this paper, we introduce a novel molecular switch paradigm that integrates spin crossover complexes with the Fano resonance effect. Specifically, by performing density-functional theory calculations, the feasibility of achieving Fano resonance using spin crossover complexes is demonstrated in our designed molecular junctions using the complex {Fe[H2B(pz)2]2[Bp(bipy)]} [pz = 1-pyrazolyl, Bp(bipy) = bis(phenylethynyl)(2,2'-bipyridine)]. It is further revealed that the Fano resonance, particularly the Fano dip, is most prominent in the junction with cobalt tips among all the schemes, together with the spin-filtering effect. Most importantly, this junction of cobalt tips is able to exhibit three distinct conductance states, which are controlled by the modulation of Fano resonance due to the spin-state transition of the complex and the applied gate voltage. Such a molecular switch paradigm holds potential for applications in logic gates, memory units, sensors, thermoelectrics, and beyond.

Conductance Evolution of Photoisomeric Single-Molecule Junctions under Ultraviolet Irradiation and Mechanical Stretching

A comprehensive understanding of carrier transport in photoisomeric molecular junctions is crucial for the rational design and delicate fabrication of single-molecule functional devices. It has been widely recognized that the conductance of azobenzene (a class of photoisomeric molecules) based molecular junctions is mainly determined by photoinduced conformational changes. In this study, it is demonstrated that the most probable conductance of amine-anchored azobenzene-based molecular junctions increases continuously upon UV irradiation. In contrast, the conductance of pyridyl-anchored molecular junctions with an identical azobenzene core exhibits a contrasting trend, highlighting the pivotal role that anchoring groups play, potentially overriding (even reversing) the effects of photoinduced conformational changes. It is further demonstrated that the molecule with cis-conformation cannot be fully mechanically stretched into the trans-conformation, clarifying that it is a great challenge to realize a reversible molecular switch by purely mechanical operation. Additionally, it is revealed that the coupling strength of pyridyl-anchored molecules is dramatically weakened when the UV irradiation time is prolonged, whereas it is not observed for amine-anchored molecules. The mechanisms for these observations are elucidated with the assistance of density functional theory calculations and UV-Vis spectra combined with flicker noise measurements which confirm the photoinduced conformational changes, providing insight into understanding the charge transport in photoisomeric molecular junctions and offering a routine for logical designing synchro opto-mechanical molecular switches.

Regulation of quantum spin conversions in a single molecular radical

Free radicals, generally formed through the cleavage of covalent electron-pair bonds, play an important role in diverse fields ranging from synthetic chemistry to spintronics and nonlinear optics. However, the characterization and regulation of the radical state at a single-molecule level face formidable challenges. Here we present the detection and sophisticated tuning of the open-shell character of individual diradicals with a donor-acceptor structure via a sensitive single-molecule electrical approach. The radical is sandwiched between nanogapped graphene electrodes via covalent amide bonds to construct stable graphene-molecule-graphene single-molecule junctions. We measure the electrical conductance as a function of temperature and track the evolution of the closed-shell and open-shell electronic structures in real time, the open-shell triplet state being stabilized with increasing temperature. Furthermore, we tune the spin states by external stimuli, such as electrical and magnetic fields, and extract thermodynamic and kinetic parameters of the transition between closed-shell and open-shell states. Our findings provide insights into the evolution of single-molecule radicals under external stimuli, which may proof instrumental for the development of functional quantum spin-based molecular devices.

Rotaxane-Functionalized Dyes for Charge-Rectification in p-Type Photoelectrochemical Devices

A supramolecular photovoltaic strategy is applied to enhance power conversion efficiencies (PCE) of photoelectrochemical devices by suppressing electron-hole recombination after photoinduced electron transfer (PET). Here, the author exploit supramolecular localization of the redox mediator-in close proximity to the dye-through a rotaxane topology, reducing electron-hole recombination in p-type dye-sensitized solar cells (p-DSSCs). Dye PRotaxane features 1,5-dioxynaphthalene recognition sites (DNP-arms) with a mechanically-interlocked macrocyclic redox mediator naphthalene diimide macrocycle (3-NDI-ring), stoppering synthetically via click chemistry. The control molecule PStopper has stoppered DNP-arms, preventing rotaxane formation with the 3-NDI-ring. Transient absorption and time-resolved fluorescence spectroscopy studies show ultrafast (211 ± 7 fs and 2.92 ± 0.05 ps) PET from the dye-moiety of PRotaxane to its mechanically interlocked 3-NDI-ring-acceptor, slowing down the electron-hole recombination on NiO surfaces compared to the analogue . p-DSSCs employing PRotaxane (PCE = 0.07%) demonstrate a 30% PCE increase compared to PStopper (PCE = 0.05%) devices, combining enhancements in both open-circuit voltages (VOC = 0.43 vs 0.36 V) and short-circuit photocurrent density (JSC = -0.39 vs -0.34 mA cm-2 ). Electrochemical impedance spectroscopy shows that PRotaxane devices exhibit hole lifetimes (τh ) approaching 1 s, a 16-fold improvement compared to traditional I- /I3 - -based systems (τh = 50 ms), demonstrating the benefits obtained upon nanoengineering of interfacial dye-regeneration at the photocathode.

Stimuli-Responsive Nanostructured Viologen-Siloxane Materials for Controllable Conductivity

Spontaneous phase separation is a promising strategy for the development of novel electronic materials, as the resulting well-defined morphologies generally exhibit enhanced conductivity. Making these structures adaptive to external stimuli is challenging, yet crucial as multistate reconfigurable switching is essential for neuromorphic materials. Here, a modular and scalable approach is presented to obtain switchable phase-separated viologen-siloxane nanostructures with sub-5 nm features. The domain spacing, morphology, and conductivity of these materials can be tuned by ion exchange, repeated pulsed photoirradiation and electric stimulation. Counterion exchange triggers a postsynthetic modification in domain spacing of up to 10%. Additionally, in some cases, 2D to 1D order-order transitions are observed with the latter exhibiting a sevenfold decrease in conductivity with respect to their 2D lamellar counterparts. Moreover, the combination of the viologen core with tetraphenylborate counterions enables reversible and in situ reduction upon light irradiation. This light-driven reduction provides access to a continuum of conducting states, reminiscent of long-term potentiation. The repeated voltage sweeps improve the nanostructures alignment, leading to increased conductivity in a learning effect. Overall, these results highlight the adaptivity of phase-separated nanostructures for the next generation of organic electronics, with exciting applications in smart sensors and neuromorphic devices.

Rational Design of Stimuli-Responsive Inorganic 2D Materials via Molecular Engineering: Toward Molecule-Programmable Nanoelectronics

The ability of electronic devices to act as switches makes digital information processing possible. Succeeding graphene, emerging inorganic 2D materials (i2DMs) have been identified as alternative 2D materials to harbor a variety of active molecular components to move the current silicon-based semiconductor technology forward to a post-Moore era focused on molecule-based information processing components. In this regard, i2DMs benefits are not only for their prominent physiochemical properties (e.g., the existence of bandgap), but also for their high surface-to-volume ratio rich in reactive sites. Nonetheless, since this field is still in an early stage, having knowledge of both i) the different strategies for molecularly functionalizing the current library of i2DMs, and ii) the different types of active molecular components is a sine qua non condition for a rational design of stimuli-responsive i2DMs capable of performing logical operations at the molecular level. Consequently, this Review provides a comprehensive tutorial for covalently anchoring ad hoc molecular components-as active units triggered by different external inputs-onto pivotal i2DMs to assess their role in the expanding field of molecule-programmable nanoelectronics for electrically monitoring bistable molecular switches. Limitations, challenges, and future perspectives of this emerging field which crosses materials chemistry with computation are critically discussed.

Fabrication of multi-functional molecular tunnelling junctions by click chemistry

Continuous advancement in molecular electronics demands increasing functionality and diversity of integrated molecular junctions; however, single-functional molecular junctions fail to meet these requirements. In this article, we propose the use of a widely applicable and efficient click reaction on the surface to modify self-assembled monolayers (SAMs) to achieve multifunctional molecular tunnelling junctions, current rectification and memristance, on a single chip. This approach has allowed us to meet the growing demand for versatility and functionality in molecular electronic devices.

Theoretical Study on the Open-Shell Electronic Structure and Electron Conductivity of [18]Annulene as a Molecular Parallel Circuit Model

Herein, the electron conductivities of [18]annulene and its derivatives are theoretically examined as a molecular parallel circuit model consisting of two linear polyenes. Their electron conductivities are estimated by elastic scattering Green's function (ESGF) theory and density functional theory (DFT) methods. The calculated conductivity of the [18]annulene does not follow the classical conductivity, i.e., Ohm's law, suggesting the importance of a quantum interference effect in single molecules. By introducing electron-withdrawing groups into the annulene framework, on the other hand, a spin-polarized electronic structure appears, and the quantum interference effect is significantly suppressed. In addition, the total current is affected by the spin polarization because of the asymmetry in the coupling constant between the molecule and electrodes. From these results, it is suggested that the electron conductivity as well as the quantum interference effect of π-conjugated molecular systems can be designed using their open-shell nature, which is chemically controlled by the substituents.

Coexistence of Electrochromism and Bipolar Nonvolatile Memory in a Single Viologen

Viologens are fascinating redox-active organic compounds that have been widely explored in electrochromic devices (ECDs). However, the combination of electrochromic and resistive random-access memory in a single viologen remains unexplored. We report the coexistence of bistate electrochromic and single-resistor (1R) memory functions in a novel viologen. A high-performance electrochromic function is achieved by combining viologen (BzV2+2PF6) with polythiophene (P3HT), enabling a "push-pull" electronic effect due to the efficient intermolecular charge transfer in response to an applied bias. The ECDs show high coloration efficiency (ca. 1150 ± 10 cm2 C-1), subsecond switching time, good cycle stability (>103 switching cycles), and low-bias operation (±1.5 V). The ECDs require low power for switching the color states (55 μW cm-2 for magenta and 141 μW cm-2 for blue color). The random-access memory devices (p+2-Si/BzV2+2PF6/Al) exhibit distinct low and high resistive states with an ON/OFF ratio of ∼103, bipolar and nonvolatile characteristics that manifest good performances, and "Write"-"Read"-"Erase" (WRE) functions. The charge conduction mechanism of the RRAM device is elucidated by the Poole-Frenkel model where SET and RESET states arise at a low transition voltage (VT = ±1.7 V). Device statistics and performance parameters for both electrochromic and memory devices are compared with the literature data. Our findings on electrochromism and nonvolatile memory originated in the same viologen could boost the development of multifunctional, smart, wearable, flexible, and low-cost optoelectronic devices.

Supramolecular Memristor Based on Bistable [2]Catenanes: Toward High-Density and Non-Volatile Memory Devices

The ever-increasing demand for data storage and neuromorphic computing calls for innovative, high-density solutions, such as resistive random-access memory (RRAM). However, the integration of resistive switching and rectification at the nanoscale remains a formidable challenge. In this study, we introduce a bistable [2]catenane-based supramolecular junction that simultaneously functions as a resistive switch and a diode. All supramolecular junctions are highly stable and reproducible over thousands of resistive switching cycles, because the nano-confinement of two mechanically interlocked rings can stabilize the radical states of pyridinium moieties under ambient conditions. The successful realization of supramolecular junctions in functionality with a thickness of approximately 2 nm presents a promising avenue for the development of molecule-scale based RRAM for a better solution to high density and energy efficiency.

In-situ electro-responsive through-space coupling enabling foldamers as volatile memory elements

Voltage-gated processing units are fundamental components for non-von Neumann architectures like memristor and electric synapses, on which nanoscale molecular electronics have possessed great potentials. Here, tailored foldamers with furan‒benzene stacking (f-Fu) and thiophene‒benzene stacking (f-Th) are designed to decipher electro-responsive through-space interaction, which achieve volatile memory behaviors via quantum interference switching in single-molecule junctions. f-Fu exhibits volatile turn-on feature while f-Th performs stochastic turn-off feature with low voltages as 0.2 V. The weakened orbital through-space mixing induced by electro-polarization dominates stacking malposition and quantum interference switching. f-Fu possesses higher switching probability and faster responsive time, while f-Th suffers incomplete switching and longer responsive time. High switching ratios of up to 91 for f-Fu is realized by electrochemical gating. These findings provide evidence and interpretation of the electro-responsiveness of non-covalent interaction at single-molecule level and offer design strategies of molecular non-von Neumann architectures like true random number generator.

Robust Sub-5 Nanometer bis(Diarylcarbene)-Based Thin Film for Molecular Electronics and Plasmonics

In miniaturized electronic and optoelectronic circuits, molecular tunnel junctions have attracted enormous research interest due to their small footprint, low power consumption, and rich molecular functions. However, the most popular building blocks used in contemporary molecular tunnel junctions are thiol molecules, which attach to electrode surfaces via a metal-thiolate (MS) bond, showing low stability and usually quick degradation within several days. To pave the way for more widely applicable and stable molecular tunnel junctions, there is a need to develop new molecular anchoring groups. Here, this work demonstrates robust and air-stable molecular tunnel junctions with a sub-5 nanometer bis(diarylcarbene)-based thin film as the tunneling barrier, which anchors to the electrode surface via a AuC bond. The bis(diarylcarbene)-based molecular tunnel junctions exhibit high thermal stability against heating up to 200 °C and long storage lifetime over 5 months in an ambient environment. Both electrical and optical performance of these bis(diarylcarbene)-based molecular junctions are characterized systematically, showing similar behaviors to thiol-based junctions as well as largely improved emission stability. This research highlights the excellent performance of bis(diarylcarbene)-based molecular tunnel junctions, which could be useful for applications in molecular electronics and plasmonics.

Fine-Tuning the Molecular Design for High-Performance Molecular Diodes Based on Pyridyl Isomers

Better control of molecule-electrode coupling (Γ) to minimize leakage current is an effective method to optimize the functionality of molecular diodes. Herein we embedded 5 isomers of phenypyridyl derivatives, each with an N atom placed at a different position, in two electrodes to fine-tune Γ between self-assembled monolayers (SAMs) and the top electrode of EGaIn (eutectic Ga-In terminating in Ga2 O3 ). Combined with electrical tunnelling results, characterizations of electronic structures, single-level model fittings, and DFT calculations, we found that the values of Γ of SAMs formed by these isomers could be regulated by nearly 10 times, thereby contributing to the leakage current changing over about two orders of magnitude and switching the isomers from resistors to diodes with a rectification ratio (r+ =|J(+1.5 V)/J(-1.5 V)|) exceeding 200. We demonstrated that the N atom placement can be chemically engineered to tune the resistive and rectifying properties of the molecular junctions, making it possible to convert molecular resistors into rectifiers. Our study provides fundamental insights into the role of isomerism in molecular electronics and offers a new avenue for designing functional molecular devices.

Generic dynamic molecular devices by quantitative non-steady-state proton/water-coupled electron transport kinetics

Dynamic molecular devices operating with time- and history-dependent performance raised new challenges for the fundamental study of microscopic non-steady-state charge transport as well as functionalities that are not achievable by steady-state devices. In this study, we reported a generic dynamic mode of molecular devices by addressing the transient redox state of ubiquitous quinone molecules in the junction by proton/water transfer. The diffusion limited slow proton/water transfer-modulated fast electron transport, leading to a non-steady-state transport process, as manifested by the negative differential resistance, dynamic hysteresis, and memory-like behavior. A quantitative paradigm for the study of the non-steady-state charge transport kinetics was further developed by combining the theoretical model and transient state characterization, and the principle of the dynamic device can be revealed by the numerical simulator. On applying pulse stimulation, the dynamic device emulated the neuron synaptic response with frequency-dependent depression and facilitation, implying a great potential for future nonlinear and brain-inspired devices.

Local cation-tuned reversible single-molecule switch in electric double layer

The nature of molecule-electrode interface is critical for the integration of atomically precise molecules as functional components into circuits. Herein, we demonstrate that the electric field localized metal cations in outer Helmholtz plane can modulate interfacial Au-carboxyl contacts, realizing a reversible single-molecule switch. STM break junction and I-V measurements show the electrochemical gating of aliphatic and aromatic carboxylic acids have a conductance ON/OFF behavior in electrolyte solution containing metal cations (i.e., Na⁺, K⁺, Mg²⁺ and Ca²⁺), compared to almost no change in conductance without metal cations. In situ Raman spectra reveal strong molecular carboxyl-metal cation coordination at the negatively charged electrode surface, hindering the formation of molecular junctions for electron tunnelling. This work validates the critical role of localized cations in the electric double layer to regulate electron transport at the single-molecule level.

Molecular Electronics: Creating and Bridging Molecular Junctions and Promoting Its Commercialization

Molecular electronics is driven by the dream of expanding Moore's law to the molecular level for next-generation electronics through incorporating individual or ensemble molecules into electronic circuits. For nearly 50 years, numerous efforts have been made to explore the intrinsic properties of molecules and develop diverse fascinating molecular electronic devices with the desired functionalities. The flourishing of molecular electronics is inseparable from the development of various elegant methodologies for creating nanogap electrodes and bridging the nanogap with molecules. This review first focuses on the techniques for making lateral and vertical nanogap electrodes by breaking, narrowing, and fixed modes, and highlights their capabilities, applications, merits, and shortcomings. After summarizing the approaches of growing single molecules or molecular layers on the electrodes, the methods of constructing a complete molecular circuit are comprehensively grouped into three categories: 1) directly bridging one-molecule-electrode component with another electrode, 2) physically bridging two-molecule-electrode components, and 3) chemically bridging two-molecule-electrode components. Finally, the current state of molecular circuit integration and commercialization is discussed and perspectives are provided, hoping to encourage the community to accelerate the realization of fully scalable molecular electronics for a new era of integrated microsystems and applications.

Stereoelectronic Modulation of a Single-Molecule Junction through a Tunable Metal-Carbon dπ-pπ Hyperconjugation

Conjugated molecules play a critical role in the construction of single-molecule devices. However, most conventional conjugated molecules, such as hydrocarbons, involve only a pπ-pπ conjugation of light elements. While the metal d-orbitals can introduce abundant electronic effects to achieve novel electronic properties, it is very scarce for the charge transport study of dπ-pπ conjugated pathways with a metal involved. Here, we employed the single-molecule break junction technique to investigate the charge transport through dπ-pπ conjugated backbones with metal-carbon multiple bonds integrated into the alternative conjugated pathways. The involved dπ-pπ conjugation not only supports high conductivity comparable to that of conjugated hydrocarbons but also significantly enhances the tunable diversity in electronic properties through the metal-induced secondary interaction. Specifically, the introduction of the metal brings an unconventionally stereoelectronic effect triggered by metal-carbon dπ-pπ hyperconjugation, which can be tuned by protonation taking place on the metal-carbon multiple bonds, collectively modulating the single-molecule rectification feature and transmission mechanism. This work demonstrates the promise of utilizing the diverse electronic effect of metals to design molecular devices.

Supramolecular Enhancement of Charge Transport through Pillar[5]arene-Based Self-Assembled Monolayers

Intermolecular charge transport is one of the essential modes for modulating charge transport in molecular electronic devices. Supermolecules are highly promising candidates for molecular devices because of their abundant structures and easy functionalization. Herein, we report an efficient strategy to enhance charge transport through pillar[5]arene self-assembled monolayers (SAMs) by introducing cationic guests. The current density of pillar[5]arene SAMs can be raised up to about 2.1 orders of magnitude by inserting cationic molecules into the cavity of pillar[5]arenes in SAMs. Importantly, we have also observed a positive correlation between the charge transport of pillar[5]arene-based complex SAMs and the binding affinities of the pillar[5]arene-based complexation. Such an enhancement of charge transport is attributed to the efficient host-guest interactions that stabilize the supramolecular complexes and lower the energy gaps for charge transport. This work provides a predictive pattern for the regulation of intermolecular charge transport in guiding the design of next generation switches and functional sensors in supramolecular electronics.

An artificial synapse based on molecular junctions

Shrinking the size of the electronic synapse to molecular length-scale, for example, an artificial synapse directly fabricated by using individual or monolayer molecules, is important for maximizing the integration density, reducing the energy consumption, and enabling functionalities not easily achieved by other synaptic materials. Here, we show that the conductance of the self-assembled peptide molecule monolayer could be dynamically modulated by placing electrical biases, enabling us to implement basic synaptic functions. Both short-term plasticity (e.g., paired-pulse facilitation) and long-term plasticity (e.g., spike-timing-dependent plasticity) are demonstrated in a single molecular synapse. The dynamic current response is due to a combination of both chemical gating and coordination effects between Ag⁺ and hosting groups within peptides which adjusts the electron hopping rate through the molecular junction. In the end, based on the nonlinearity and short-term synaptic characteristics, the molecular synapses are utilized as reservoirs for waveform recognition with 100% accuracy at a small mask length.

Nanoscale molecular rectifiers

The use of molecules bridged between two electrodes as a stable rectifier is an important goal in molecular electronics. Until recently, however, and despite extensive experimental and theoretical work, many aspects of our fundamental understanding and practical challenges have remained unresolved and prevented the realization of such devices. Recent advances in custom-designed molecular systems with rectification ratios exceeding 10⁵ have now made these systems potentially competitive with existing silicon-based devices. Here, we provide an overview and critical analysis of recent progress in molecular rectification within single molecules, self-assembled monolayers, molecular multilayers, heterostructures, and metal-organic frameworks and coordination polymers. Examples of conceptually important and best-performing systems are discussed, alongside their rectification mechanisms. We present an outlook for the field, as well as prospects for the commercialization of molecular rectifiers.

Smart Eutectic Gallium-Indium: From Properties to Applications

Eutectic gallium-indium (EGaIn), a liquid metal with a melting point close to or below room temperature, has attracted extensive attention in recent years due to its excellent properties such as fluidity, high conductivity, thermal conductivity, stretchability, self-healing capability, biocompatibility, and recyclability. These features of EGaIn can be adjusted by changing the experimental condition, and various composite materials with extended properties can be further obtained by mixing EGaIn with other materials. In this review, not only the are unique properties of EGaIn introduced, but also the working principles for the EGaIn-based devices are illustrated and the developments of EGaIn-related techniques are summarized. The applications of EGaIn in various fields, such as flexible electronics (sensors, antennas, electronic circuits), molecular electronics (molecular memory, opto-electronic switches, or reconfigurable junctions), energy catalysis (heat management, motors, generators, batteries), biomedical science (drug delivery, tumor therapy, bioimaging and neural interfaces) are reviewed. Finally, a critical discussion of the main challenges for the development of EGaIn-based techniques are discussed, and the potential applications in new fields are prospected.

Probing the Effect of the Density of Active Molecules in Large-Area Molecular Junctions

The effect of the density of active molecules in molecular junctions (MJs) has been investigated by using a host/guest strategy. Mixed layers consisting of oligothiophene (BTB) encapsulated by β-cyclodextrin (BTB@β-CD) were generated. Cyclodextrins were then removed, and the pinholes generated were filled with BTB to obtain BTB@BTB films. MJs based on mixed BTB@β-CD and BTB@BTB layers, as well as single-component BTB MJs, were compared. The variation of ln J vs thickness is similar for all systems while the J_o of BTB@β-CD MJs is 20 times lower than that of BTB MJs. After β-cyclodextrin has been removed, and the pinholes filled, J_o increases and reaches the same value as for the BTB MJs, showing that the conductance scales with the number of active molecules. This strategy provides a unique method for investigating molecular interactions in direct tunneling MJs as well as the possibility of fabricating new functionalized MJs based on mixed layers.

Chemical Conformation Induced Transport Carrier Switching in Molecular Junction based on Carboxylic-Terminated Thiol Molecules

The paper demonstrates the effect of the chemical conformation of the -COOH group on the transport characteristic including conductance, rectification, and length effect in molecular junctions (MJs) formed by self-assembled monolayers of carboxylic-terminated thiol molecules. For an alkyl chain shorter than C₁₁, the transport mechanism was attributed to a direct off-resonant tunneling of a hole carrier, located at the Au-S interface, whereas a hopping mechanism was assigned to the alkyl chain longer than the C₁₁ chain located at the -COOH group. The hopping mechanism may be operated by electron transport associated with the breaking of the -OH bonding likely driven by a voltage. Importantly, at the C₁₁ alkyl chain, we observed that the transport carrier operating in MJs could change from a hole carrier into an electron carrier. The result strongly proves that the chemical conformation should be considered in analyzing molecular electronics and provides a basis for the rational design of molecular electronic devices.

Dynamic molecular switches with hysteretic negative differential conductance emulating synaptic behaviour

To realize molecular-scale electrical operations beyond the von Neumann bottleneck, new types of multifunctional switches are needed that mimic self-learning or neuromorphic computing by dynamically toggling between multiple operations that depend on their past. Here, we report a molecule that switches from high to low conductance states with massive negative memristive behaviour that depends on the drive speed and number of past switching events, with all the measurements fully modelled using atomistic and analytical models. This dynamic molecular switch emulates synaptic behavior and Pavlovian learning, all within a 2.4-nm-thick layer that is three orders of magnitude thinner than a neuronal synapse. The dynamic molecular switch provides all the fundamental logic gates necessary for deep learning because of its time-domain and voltage-dependent plasticity. The synapse-mimicking multifunctional dynamic molecular switch represents an adaptable molecular-scale hardware operable in solid-state devices, and opens a pathway to simplify dynamic complex electrical operations encoded within a single ultracompact component.

Sweep-Character-Dependent Switching of the Conductance State in Ferrocene-Substituted Thiofluorene Self-Assembled Monolayers

Self-assembled monolayers (SAMs) of ferrocene-substituted thiofluorene on Au(111) exhibit two distinct conductance states (CSs) in two-terminal junctions featuring a sharp tip of eutectic GaIn as the top electrode. The occurrence of these states and the resulting effective rectification by the SAM depend on the way the bias voltage is swept; when the junction is only negatively biased, the original, high CS is preserved, whereas the junction is switched to a low CS when applying only positive biases. This results in an exceptionally high effective rectification ratio (RR) of ∼2100 already at voltages as low as 0.1 V. In contrast, when sweeping the junction alternatingly to the maximum positive and negative bias voltages (as usually performed in the literature), fully symmetric J-V curves are observed. That is, for the present SAM, rectification disappears, and the effective RR is ≈1. It is noteworthy that whether the junction in these symmetric sweeps is in the high or low CS depends on the polarity of the first sweep. We attribute the occurrence of the two CSs to a (quasi) non-reversible oxidation of the ferrocenes in combination with structural changes in the monolayer geometry. The observed sweeping dependence of the conductivity switching is an additional parameter that needs to be considered when interpreting experimental J-V curves, especially when dealing with redox-active systems.

Carbon-Based Molecular Junctions for Practical Molecular Electronics

The field of molecular electronics has grown rapidly since its experimental realization in the late 1990s, with thousands of publications on how molecules can act as circuit components and the possibility of extending microelectronic miniaturization. Our research group developed molecular junctions (MJs) using conducting carbon electrodes and covalent bonding, which provide excellent temperature tolerance and operational lifetimes. A carbon-based MJ based on quantum mechanical tunneling for electronic music represents the world's first commercial application of molecular electronics, with >3000 units currently in consumer hands. The all-carbon MJ consisting of aromatic molecules and oligomers between vapor-deposited carbon electrodes exploits covalent, C-C bonding which avoids the electromigration problem of metal contacts. The high bias and temperature stability as well as partial transparency of the all-carbon MJ permit a wide range of experiments to determine charge transport mechanisms and observe photoeffects to both characterize and stimulate operating MJs. As shown in the Conspectus figure, our group has reported a variety of electronic functions, many of which do not have analogs in conventional semiconductors. Much of the described research is oriented toward the rational design of electronic functions, in which electronic characteristics are determined by molecular structure.In addition to the fabrication of molecular electronic devices with sufficient stability and operating life for practical applications, our approach was directed at two principal questions: how do electrons move through molecules that are components of an electronic circuit, and what can we do with molecules that we cannot do with existing semiconductor technology? The central component is the molecular junction consisting of a 1-20+ nm layer of covalently bonded oligomers between two electrodes of conducting, mainly sp²-hybridized carbon. In addition to describing the unique junction structure and fabrication methods, this Account summarizes the valuable insights available from photons used both as probes of device structure and dynamics and as prods to stimulate resonant transport through molecular orbitals.Short-range (<5 nm) transport by tunneling and its properties are discussed separately from the longer-range transport (5-60 nm) which bridges the gap between tunneling and transport in widely studied organic semiconductors. Most molecular electronic studies deal with the <5 nm thickness range, where coherent tunneling is generally accepted as the dominant transport mechanism. However, the rational design of devices in this range by changing molecular structure is frustrated by electronic interactions with the conducting contacts, resulting in weak structural effects on electronic behavior. When the molecular layer thickness exceeds 5 nm, transport characteristics change completely since molecular orbitals become the conduits for transport. Incident photons can stimulate transport, with the observed photocurrent tracking the absorption spectrum of the molecular layer. Low-temperature, activationless transport of photogenerated carriers is possible for up to at least 60 nm, with characteristics completely distinct from coherent tunneling and from the hopping mechanisms proposed for organic semiconductors. The Account closes with examples of phenomena and applications enabled by molecular electronics which may augment conventional microelectronics with chemical functions such as redox charge storage, orbital transport, and energy-selective photodetection.

Molecular Van Der Waals Heterojunction Photodiodes Enabling Dipole-Induced Polarity Switching

Solid-state devices capable of controlling light-responsive charge transport at the molecular scale are essential for developing molecular optoelectronic technology. Here, a solid-state molecular photodiode device constructed by forming van der Waals (vdW) heterojunctions between standard molecular self-assembled monolayers and two-dimensional semiconductors such as WSe₂ is reported. In particular, two non-functionalized molecular species used herein (i.e., tridecafluoro-1-octanethiol and 1-octanethiol) enable bidirectional modulation of the interface band alignment with WSe₂ , depending on their dipole orientations. This dipole-induced band modulation at the vdW heterointerface leads to the opposite change of both photoswitching polarity and rectifying characteristics. Furthermore, compared with other molecular or 2D photodiodes at a similar scale, these heterojunction devices exhibit significantly enhanced photo-responsive performances in terms of photocurrent magnitude, open-circuit potential, and switching speed. This study proposes a novel concept of the solid-state molecular optoelectronic device with controlled functions and enhanced performances.

Advances of Various Heterogeneous Structure Types in Molecular Junction Systems and Their Charge Transport Properties

Molecular electronics that can produce functional electronic circuits using a single molecule or molecular ensemble remains an attractive research field because it not only represents an essential step toward realizing ultimate electronic device scaling but may also expand our understanding of the intrinsic quantum transports at the molecular level. Recently, in order to overcome the difficulties inherent in the conventional approach to studying molecular electronics and developing functional device applications, this field has attempted to diversify the electrical characteristics and device architectures using various types of heterogeneous structures in molecular junctions. This review summarizes recent efforts devoted to functional devices with molecular heterostructures. Diverse molecules and materials can be combined and incorporated in such two- and three-terminal heterojunction structures, to achieve desirable electronic functionalities. The heterojunction structures, charge transport mechanisms, and possible strategies for implementing electronic functions using various hetero unit materials are presented sequentially. In addition, the applicability and merits of molecular heterojunction structures, as well as the anticipated challenges associated with their implementation in device applications are discussed and summarized. This review will contribute to a deeper understanding of charge transport through molecular heterojunction, and it may pave the way toward desirable electronic functionalities in molecular electronics applications.

AFM Manipulation of EGaIn Microdroplets to Generate Controlled, On-Demand Contacts on Molecular Self-Assembled Monolayers

Liquid metal droplets, such as eutectic gallium-indium (EGaIn), are important in many research areas, such as soft electronics, catalysis, and energy storage. Droplet contact on solid surfaces is typically achieved without control over the applied force and without optimizing the wetting properties in different environments (e.g., in air or liquid), resulting in poorly defined contact areas. In this work, we demonstrate the direct manipulation of EGaIn microdroplets using an atomic force microscope (AFM) to generate repeated, on-demand making and breaking of contact on self-assembled monolayers (SAMs) of alkanethiols. The nanoscale positional control and feedback loop in an AFM allow us to control the contact force at the nanonewton level and, consequently, tune the droplet contact areas at the micrometer length scale in both air and ethanol. When submerged in ethanol, the droplets are highly nonwetting, resulting in hysteresis-free contact forces and minimal adhesion; as a result, we are able to create reproducible geometric contact areas of 0.8-4.5 μm² with the alkanethiolate SAMs in ethanol. In contrast, there is a larger hysteresis in the contact forces and larger adhesion for the same EGaIn droplet in air, which reduced the control over the contact area (4-12 μm²). We demonstrate the usefulness of the technique and of the gained insights in EGaIn contact mechanics by making well-defined molecular tunneling junctions based on alkanethiolate SAMs with small geometric contact areas of between 4 and 12 μm² in air, 1 to 2 orders of magnitude smaller than previously achieved.

Plasmonic phenomena in molecular junctions: principles and applications

Molecular junctions are building blocks for constructing future nanoelectronic devices that enable the investigation of a broad range of electronic transport properties within nanoscale regions. Crossing both the nanoscopic and mesoscopic length scales, plasmonics lies at the intersection of the macroscopic photonics and nanoelectronics, owing to their capability of confining light to dimensions far below the diffraction limit. Research activities on plasmonic phenomena in molecular electronics started around 2010, and feedback between plasmons and molecular junctions has increased over the past years. These efforts can provide new insights into the near-field interaction and the corresponding tunability in properties, as well as resultant plasmon-based molecular devices. This Review presents the latest advancements of plasmonic resonances in molecular junctions and details the progress in plasmon excitation and plasmon coupling. We also highlight emerging experimental approaches to unravel the mechanisms behind the various types of light-matter interactions at molecular length scales, where quantum effects come into play. Finally, we discuss the potential of these plasmonic-electronic hybrid systems across various future applications, including sensing, photocatalysis, molecular trapping and active control of molecular switches.

Modulated Structure and Rectification Properties of a Molecular Junction by a Mixed Self-Assembled Monolayer

The organization of the self-assembled monolayer (SAM) determines its electronic structure and so governs the charge transport process and device performance when adopted into a molecular device. We report a systematic study on the supramolecular structure and rectification performance of the ferrocene (11-ferrocenyl-1-undecanethiol, FUT) based SAM modulated by mixed SAM with inert 1-undecanethiol (C₁₁SH) as diluent. We compared mixed SAMs by two different post assembly strategies, i.e., post assembly of C₁₁SH on FUT SAM and post assembly of FUT on C₁₁SH SAM. The organization and structure of FUT in the mixed SAM were extensively studied by cyclic voltammetry (CV) using the Laviron model. Rectification properties of the mixed SAM obtained using eutectic indium gallium (EGaIn) as the top electrode revealed that the magnitude and stability of the rectification ratio (RR) strongly correlated to not only the amount but also the phase structure and orientation of the FUT in the monolayer, resulting in a tunable RR and increased stability. The mixed monolayer achieved an increased performance relative to pure FUT by post assembling FUT on C₁₁SH SAM, which formed an optimally dense and well-packed monolayer with the FUT head resting on the top of the alkane SAM.

Field-Created Coordinate Cation Bridges Enable Conductance Modulation and Artificial Synapse within Metal Nanoparticles

When metal nanoparticles are functionalized with charged ligands, the movement of counterions and conduction electrons is coupled, which enables us to develop electronic devices, including diodes, transistors, and logic gates, but dynamically modulating the conductivity of a synaptic device within these materials has proved challenging. Here we show that an artificial synapse can be created from thin films of functionalized metal nanoparticles using an active silver electrode. The electric-field-injected Ag⁺ coordinates with carboxyl ligands that sets up a conduction bridge to increase the nanoparticle conductivity by reducing the electron tunneling/hopping energy barriers. The dynamic modulation of conductivity allows us to implement several important synaptic functions such as potentiation/depression, paired-pulse facilitation, learning behaviors including short-term to long-term memory transition, self-learning, and massed leaning vs spaced learning. Finally, based on the nonvolatile characteristics, the metal nanoparticle synapse is used to build a single-layer hardware spiking neural network (SNN) for pattern recognition.

Electrical bistability based on metal-organic frameworks

Electrical bistability existing in biochemical networks is critical for the proper functionalization of living systems. The development of artificial materials with electrical bistability begun to attract much interest due to their broad application prospects, especially in the field of memristors. Metal-organic frameworks (MOFs) have advantages in regular pores, crystallinity, structural designability and easy functionalization, which can promote the construction of novel MOF-based memristors and facilitate a better understanding of switching mechanisms. Here, we highlight recent advances in electrically bistable MOFs as memristors, and discuss their switching mechanisms, including interfacial reaction, proton-transfer mechanism, metal ion migration, charge trapping/detrapping and other mechanisms. Challenges and future perspectives are also presented.

Room-temperature logic-in-memory operations in single-metallofullerene devices

In-memory computing provides an opportunity to meet the growing demands of large data-driven applications such as machine learning, by colocating logic operations and data storage. Despite being regarded as the ultimate solution for high-density integration and low-power manipulation, the use of spin or electric dipole at the single-molecule level to realize in-memory logic functions has yet to be realized at room temperature, due to their random orientation. Here, we demonstrate logic-in-memory operations, based on single electric dipole flipping in a two-terminal single-metallofullerene (Sc₂C₂@C_s(hept)-C₈₈) device at room temperature. By applying a low voltage of ±0.8 V to the single-metallofullerene junction, we found that the digital information recorded among the different dipole states could be reversibly encoded in situ and stored. As a consequence, 14 types of Boolean logic operation were shown from a single-metallofullerene device. Density functional theory calculations reveal that the non-volatile memory behaviour comes from dipole reorientation of the [Sc₂C₂] group in the fullerene cage. This proof-of-concept represents a major step towards room-temperature electrically manipulated, low-power, two-terminal in-memory logic devices and a direction for in-memory computing using nanoelectronic devices.

2,7- and 4,9-Dialkynyldihydropyrene Molecular Switches: Syntheses, Properties, and Charge Transport in Single-Molecule Junctions

This paper describes the syntheses of several functionalized dihydropyrene (DHP) molecular switches with different substitution patterns. Regioselective nucleophilic alkylation of a 5-substituted dimethyl isophthalate allowed the development of a workable synthetic protocol for the preparation of 2,7-alkyne-functionalized DHPs. Synthesis of DHPs with surface-anchoring groups in the 2,7- and 4,9-positions is described. The molecular structures of several intermediates and DHPs were elucidated by X-ray single-crystal diffraction. Molecular properties and switching capabilities of both types of DHPs were assessed by light irradiation experiments, spectroelectrochemistry, and cyclic voltammetry. Spectroelectrochemistry, in combination with density functional theory (DFT) calculations, shows reversible electrochemical switching from the DHP forms to the cyclophanediene (CPD) forms. Charge-transport behavior was assessed in single-molecule scanning tunneling microscope (STM) break junctions, combined with density functional theory-based quantum transport calculations. All DHPs with surface-contacting groups form stable molecular junctions. Experiments show that the molecular conductance depends on the substitution pattern of the DHP motif. The conductance was found to decrease with increasing applied bias.

Conductance Switching in Liquid Crystal-Inspired Self-Assembled Monolayer Junctions

We present the prototype of a ferroelectric tunnel junction (FTJ), which is based on a self-assembled monolayer (SAM) of small, functional molecules. These molecules have a structure similar to those of liquid crystals, and they are embedded between two solid-state electrodes. The SAM, which is deposited through a short sequence of simple fabrication steps, is extremely thin (3.4 ± 0.5 nm) and highly uniform. The functionality of the FTJ is ingrained in the chemical structure of the SAM components: a conformationally flexible dipole that can be reversibly reoriented in an electrical field. Thus, the SAM acts as an electrically switchable tunnel barrier. Fabricated stacks of Al/Al₂O₃/SAM/Pb/Ag with such a polar SAM show pronounced hysteretic, reversible conductance switching at voltages in the range of ±2-3 V, with a conductance ratio of the low and the high resistive states of up to 100. The switching mechanism is analyzed using a combination of quantum chemical, molecular dynamics, and tunneling resistance calculation methods. In contrast to more common, inorganic material-based FTJs, our approach using SAMs of small organic molecules allows for a high degree of functional complexity and diversity to be integrated by synthetic standard methods, while keeping the actual device fabrication process robust and simple. We expect that this technology can be further developed toward a level that would then allow its application in the field of information storage and processing, in particular for in-memory and neuromorphic computing architectures.

Single-molecule nano-optoelectronics: insights from physics

Single-molecule optoelectronic devices promise a potential solution for miniaturization and functionalization of silicon-based microelectronic circuits in the future. For decades of its fast development, this field has made significant progress in the synthesis of optoelectronic materials, the fabrication of single-molecule devices and the realization of optoelectronic functions. On the other hand, single-molecule optoelectronic devices offer a reliable platform to investigate the intrinsic physical phenomena and regulation rules of matters at the single-molecule level. To further realize and regulate the optoelectronic functions toward practical applications, it is necessary to clarify the intrinsic physical mechanisms of single-molecule optoelectronic nanodevices. Here, we provide a timely review to survey the physical phenomena and laws involved in single-molecule optoelectronic materials and devices, including charge effects, spin effects, exciton effects, vibronic effects, structural and orbital effects. In particular, we will systematically summarize the basics of molecular optoelectronic materials, and the physical effects and manipulations of single-molecule optoelectronic nanodevices. In addition, fundamentals of single-molecule electronics, which are basic of single-molecule optoelectronics, can also be found in this review. At last, we tend to focus the discussion on the opportunities and challenges arising in the field of single-molecule optoelectronics, and propose further potential breakthroughs.

Stable Universal 1- and 2-Input Single-Molecule Logic Gates

Controllable single-molecule logic operations will enable development of reliable ultra-minimalistic circuit elements for high-density computing but require stable currents from multiple orthogonal inputs in molecular junctions. Utilizing the two unique adjacent conductive molecular orbitals (MOs) of gated Au/S-(CH₂ )₃ -Fc-(CH₂ )₉ -S/Au (Fc = ferrocene) single-electron transistors (≈2 nm), a stable single-electron logic calculator (SELC) is presented, which allows real-time modulation of output current as a function of orthogonal input bias (V_b ) and gate (V_g ) voltages. Reliable and low-voltage (ǀV_b ǀ ≤ 80 mV, ǀV_g ǀ ≤ 2 V) operations of the SELC depend upon the unambiguous association of current resonances with energy shifts of the MOs (which show an invariable, small energy separation of ≈100 meV) in response to the changes of voltages, which is confirmed by electron-transport calculations. Stable multi-logic operations based on the SELC modulated current conversions between the two resonances and Coulomb blockade regimes are demonstrated via the implementation of all universal 1-input (YES/NOT/PASS_1/PASS_0) and 2-input (AND/XOR/OR/NAND/NOR/INT/XNOR) logic gates.

Construction of a pH-Mediated Single-Molecule Switch with a Nanopore-DNA Complex

A molecular switch is one of the simplest examples of artificial molecular machines. Even so, the development of molecular switches is still at its very early stage. Currently, building single-molecule switches mostly rely on the molecular junction technique, but many of their performance characteristics are device-dependent. Here, a pH-mediated single-molecule switch based on the combination of an α-hemolysin (αHL) nanopore and a hexacyclen-modified DNA strand is developed. The single-stranded DNA is suspended inside an αHL through biotin-streptavidin linkage and the hexacyclen-modified nucleobase interacts with amino acid residues at positions 111, 113, and 147 to cause current oscillations. Distinct current transitions are observed when pH is tuned back and forth in the range of 3.0-7.4, with a typical "up" level when pH > 6.5 and a "down" level when pH < 4.5. This nanopore-DNA complex possesses membrane-bound advantages and may find applications in single-cell studies where pH could be readily tuned to control ON-OFF functions.

Demonstration of Molecular Tunneling Junctions Based on Vertically Stacked Graphene Heterostructures

We demonstrate the fabrication and complete characterization of vertical molecular tunneling junctions based on graphene heterostructures, which incorporate a control series of arylalkane molecules acting as charge transport barriers. Raman spectroscopy and atomic force microscopy were employed to identify the formation of the molecular monolayer via an electrophilic diazonium reaction on a pre-patterned bottom graphene electrode. The top graphene electrode was transferred to the deposited molecular layer to form a stable electrical connection without filamentary damage. Then, we showed proof of intrinsic charge carrier transport through the arylalkane molecule in the vertical tunneling junctions by carrying out multiprobe approaches combining complementary transport characterization methods, which included length- and temperature-dependent charge transport measurements and transition voltage spectroscopy. Interpretation of all the electrical characterizations was conducted on the basis of intact statistical analysis using a total of 294 fabricated devices. Our results and analysis can provide an objective criterion to validate molecular electronic devices fabricated with graphene electrodes and establish statistically representative junction properties. Since many of the experimental test beds used to examine molecular junctions have generated large variation in the measured data, such a statistical approach is advantageous to identify the meaningful parameters with the data population and describe how the results can be used to characterize the graphene-based molecular junctions.

On-chip integrated process-programmable sub-10 nm thick molecular devices switching between photomultiplication and memristive behaviour

Molecular devices constructed by sub-10 nm thick molecular layers are promising candidates for a new generation of integratable nanoelectronic applications. Here, we report integrated molecular devices based on ultrathin copper phthalocyanine/fullerene hybrid layers with microtubular soft-contacts, which exhibit process-programmable functionality switching between photomultiplication and memristive behaviour. The local electric field at the interface between the polymer bottom electrode and the enclosed molecular channels modulates the ionic-electronic charge interaction and hence determines the transition of the device function. When ions are not driven into the molecular channels at a low interface electric field, photogenerated holes are trapped as electronic space charges, resulting in photomultiplication with a high external quantum efficiency. Once mobile ions are polarized and accumulated as ionic space charges in the molecular channels at a high interface electric field, the molecular devices show ferroelectric-like memristive switching with remarkable resistive ON/OFF and rectification ratios.

Developing molecular electronics is challenged by integrating fragile organic molecules into modern micro/nanoelectronics based on inorganic semiconductors. Li et al. apply rolled-up nanotechnology to assemble on-chip molecular devices, which can be switched between photodiodes and volatile memristors.

Measuring conductance switching in single proteins using quantum tunneling

Interpreting the electrical signatures of single proteins in electronic junctions has facilitated a better understanding of the intrinsic properties of proteins that are fundamental to chemical and biological processes. Often, this information is not accessible using ensemble and even single-molecule approaches. In addition, the fabrication of nanoscale single-protein junctions remains challenging as they often require sophisticated methods. We report on the fabrication of tunneling probes, direct measurement, and active control (switching) of single-protein conductance with an external field in solution. The probes allowed us to bridge a single streptavidin molecule to two independently addressable, biotin-terminated electrodes and measure single-protein tunneling response over long periods. We show that charge transport through the protein has multiple conductive pathways that depend on the magnitude of the applied bias. These findings open the door for the reliable fabrication of protein-based junctions and can enable their use in future protein-embedded bioelectronics applications.

Printable logic circuits comprising self-assembled protein complexes

This paper describes the fabrication of digital logic circuits comprising resistors and diodes made from protein complexes and wired together using printed liquid metal electrodes. These resistors and diodes exhibit temperature-independent charge-transport over a distance of approximately 10 nm and require no encapsulation or special handling. The function of the protein complexes is determined entirely by self-assembly. When induced to self-assembly into anisotropic monolayers, the collective action of the aligned dipole moments increases the electrical conductivity of the ensemble in one direction and decreases it in the other. When induced to self-assemble into isotropic monolayers, the dipole moments are randomized and the electrical conductivity is approximately equal in both directions. We demonstrate the robustness and utility of these all-protein logic circuits by constructing pulse modulators based on AND and OR logic gates that function nearly identically to simulated circuits. These results show that digital circuits with useful functionality can be derived from readily obtainable biomolecules using simple, straightforward fabrication techniques that exploit molecular self-assembly, realizing one of the primary goals of molecular electronics.

Proteins are promising molecular materials for next-generation electronic devices. Here, the authors fabricated printable digital logic circuits comprising resistors and diodes from self-assembled photosystem I complexes that enable pulse modulation.

Controlled Hysteresis of Conductance in Molecular Tunneling Junctions

The problem this paper addresses is the origin of the hysteretic behavior in two-terminal molecular junctions made from an EGaIn electrode and self-assembled monolayers of alkanethiolates terminated in chelates (transition metal dichlorides complexed with 2,2'-bipyridine; BIPY-MCl₂). The hysteresis of conductance displayed by these BIPY-MCl₂ junctions changes in magnitude depending on the identity of the metal ion (M) and the window of the applied voltage across the junction. The hysteretic behavior of conductance in these junctions appears only in an incoherent (Fowler-Nordheim) tunneling regime. When the complexed metal ion is Mn(II), Fe(II), Co(II), or Ni(II), both incoherent tunneling and hysteresis are observed for a voltage range between +1.0 V and -1.0 V. When the metal ion is Cr(II) or Cu(II), however, only resonant (one-step) tunneling is observed, and the junctions exhibit no hysteresis and do not enter the incoherent tunneling regime. Using this correlation, the conductance characteristics of BIPY-MCl₂ junctions can be controlled. This voltage-induced change of conductance demonstrates a simple, fast, and reversible way (i.e., by changing the applied voltage) to modulate conductance in molecular tunneling junctions.

Light-Driven Charge Transport and Optical Sensing in Molecular Junctions

Probing charge and energy transport in molecular junctions (MJs) has not only enabled a fundamental understanding of quantum transport at the atomic and molecular scale, but it also holds significant promise for the development of molecular-scale electronic devices. Recent years have witnessed a rapidly growing interest in understanding light-matter interactions in illuminated MJs. These studies have profoundly deepened our knowledge of the structure–property relations of various molecular materials and paved critical pathways towards utilizing single molecules in future optoelectronics applications. In this article, we survey recent progress in investigating light-driven charge transport in MJs, including junctions composed of a single molecule and self-assembled monolayers (SAMs) of molecules, and new opportunities in optical sensing at the single-molecule level. We focus our attention on describing the experimental design, key phenomena, and the underlying mechanisms. Specifically, topics presented include light-assisted charge transport, photoswitch, and photoemission in MJs. Emerging Raman sensing in MJs is also discussed. Finally, outstanding challenges are explored, and future perspectives in the field are provided.