A roadmap for molecular thermoelectricity

Disordered Ballistic Bismuth Nano-waveguides for Highly Efficient Thermoelectric Energy Conversion

Junctions based on electronic ballistic waveguides, such as semiconductor nanowires or nanoribbons with transverse structural variations in the order of a large fraction of their Fermi wavelength, are suggested as highly efficient thermoelectric (TE) devices. Full harnessing of their potential requires a capability to either deterministically induce structural variations that tailor their transmission properties at the Fermi level or alternatively to form waveguides that are disordered (chaotic) but can be structurally modified continuously until favorable TE properties are achieved. Well-established methods to realize either of these routes do not exist. Here, disordered bismuth (Bi) waveguides are reported, which are both formed and structurally tuned by electromigration until their efficiency as TE devices is maximized. In accordance with theory, the conductance of the most efficient TE waveguides is in the sub quantum of conductance regime. The stability of these structures is found to be substantially higher than other actively studied devices such as single molecule junctions.

Orientational Effects and Molecular-Scale Thermoelectricity Control

The orientational effect concept in a molecular-scale junction is established for asymmetric junctions, which requires the fulfillment of two conditions: (1) design of an asymmetric molecule with strong distinct terminal end groups and (2) construction of a doubly asymmetric junction by placing an asymmetric molecule in an asymmetric junction to form a multicomponent system such as Au/Zn-TPP+M/Au. Here, we demonstrate that molecular-scale junctions that satisfy the conditions of these effects can manifest Seebeck coefficients whose sign fluctuates depending on the orientation of the molecule within the asymmetric junction in a complete theoretical investigation. Three anthracene-based compounds are investigated in three different scenarios, one of which displays a bithermoelectric behavior due to the presence of strong anchor groups, including pyridyl and thioacetate. This bithermoelectricity demonstration implies that if molecules with alternating orientations can be placed between an asymmetric source and drain, they can be potentially utilized for increasing the thermovoltage in molecular-scale thermoelectric energy generators (TEGs).

Seebeck Effect in Molecular Wires Facilitating Long-Range Transport

The study of molecular wires facilitating long-range charge transport is of fundamental interest for the development of various technologies in (bio)organic and molecular electronics. Defining the nature of long-range charge transport is challenging as electrical characterization does not offer the ability to distinguish a tunneling mechanism from the other. Here, we show that investigation of the Seebeck effect provides the ability. We examine the length dependence of the Seebeck coefficient in electrografted bis-terpyridine Ru(II) complex films. The Seebeck coefficient ranges from 307 to 1027 μV/K, with an increasing rate of 95.7 μV/(K nm) as the film thickness increases to 10 nm. Quantum-chemical calculations unveil that the nearly overlapped molecular-orbital energy level of the Ru complex with the Fermi level accounts for the giant thermopower. Landauer-Büttiker probe simulations indicate that the significant length dependence evinces the Seebeck effect dominated by coherent near-resonant tunneling rather than thermal hopping. This study enhances our comprehension of long-range charge transport, paving the way for efficient electronic and thermoelectric materials.

Exploring the Impact of the HOMO-LUMO Gap on Molecular Thermoelectric Properties: A Comparative Study of Conjugated Aromatic, Quinoidal, and Donor-Acceptor Core Systems

Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO-LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor-acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules.

Thermopower in Underpotential Deposition-Based Molecular Junctions

Underpotential deposition (UPD) is an intriguing means for tailoring the interfacial electronic structure of an adsorbate at a substrate. Here we investigate the impact of UPD on thermoelectricity occurring in molecular tunnel junctions based on alkyl self-assembled monolayers (SAMs). We observed noticeable enhancements in the Seebeck coefficient of alkanoic acid and alkanethiol monolayers, by up to 2- and 4-fold, respectively, upon replacement of a conventional Au electrode with an analogous bimetallic electrode, Cu UPD on Au. Quantum transport calculations indicated that the increased Seebeck coefficients are due to the UPD-induced changes in the shape or position of transmission resonances corresponding to gateway orbitals, which depend on the choice of the anchor group. Our work unveils UPD as a potent means for altering the shape of the tunneling energy barrier at the molecule-electrode contact of alkyl SAM-based junctions and hence enhancing thermoelectric performance.

Large Mechanosensitive Thermoelectric Enhancement in Metallo-Organic Magnetic Molecules

Organic materials are promising candidates for thermoelectric cooling and energy harvesting at room temperature. However, their electrical conductance (G) and Seebeck coefficient (S) need to be improved to make them technologically competitive. Therefore, radically new strategies need to be developed to tune their thermoelectric properties. Here, we demonstrate that G and S can be tuned mechanically in paramagnetic metallocenes, and their thermoelectric properties can be significantly enhanced by the application of mechanical forces. With a 2% junction compression, the full thermoelectric figure of merit is enhanced by more than 200 times. We demonstrate that this is because spin transport resonances in paramagnetic metallocenes are strongly sensitive to the interaction between organic ligands and the metal center, which is not the case in their diamagnetic analogue. These results open a new avenue for the development of organic thermoelectric materials for cooling future quantum computers and generating electricity from low-grade energy sources.

Large Seebeck Values in Metal-Molecule-Semimetal Junctions Attained by a Gateless Level-Alignment Method

Molecular junctions are potentially highly efficient devices for thermal energy harvesting since their transmission properties can be tailored to break electron-hole transport symmetry and consequently yield high Seebeck and Peltier coefficients. Full harnessing of this potential requires, however, a capability to precisely position their Fermi level within the transmission landscape. Currently, with the lack of such a "knob" for two-lead junctions, their thermoelectric performance is too low for applications. Here we report that the requested capability can be realized by using junctions with a semimetal lead and molecules with a tailored effect of their monolayers on the work function of the semimetal. The approach is demonstrated by junctions with monolayers of alkanethiols on bismuth (Bi). Fermi-level tuning enables in this case increasing the Seebeck coefficient by more than 2 orders of magnitude. The underlying mechanism of this capability is discussed, as well as its general applicability.

Electronic Conductance and Thermopower of Cross-Conjugated and Skipped-Conjugated Molecules in Single-Molecule Junctions

We report a combined experimental and theoretical study of a series of thiomethyl (SMe) anchored cross-conjugated molecules featuring an acyclic central bridging ketone and their analogous skipped-conjugated alcohol derivatives. Studies of these molecules in a gold|single-molecule|gold junction using scanning tunneling microscopy-break junction techniques reveal a similar conductance (G) value for both the cross-conjugated molecules and their skipped-conjugated partners. Theoretical studies based on density functional theory of the molecules in their optimum geometries in the junction reveal the reason for this similarity in conductance, as the predicted conductance for the alcohol series of compounds varies more with the tilt angle. Thermopower measurements reveal a higher Seebeck coefficient (S) for the cross-conjugated ketone molecules relative to the alcohol derivatives, with a particularly high S for the biphenyl derivative 3a (-15.6 μV/K), an increase of threefold compared to its alcohol analog. The predicted behavior of the quantum interference (QI) in this series of cross-conjugated molecules is found to be constructive, though the appearance of a destructive QI feature for 3a is due to the degeneracy of the HOMO orbital and may explain the enhancement of the value of S for this molecule.

Full thermoelectric characterization of a single molecule

Molecules are predicted to be chemically tunable towards high thermoelectric efficiencies and they could outperform existing materials in the field of energy conversion. However, their capabilities at the more technologically relevant temperature of 300 K are yet to be demonstrated. A possible reason could be the lack of a comprehensive technique able to measure the thermal and (thermo)electrical properties, including the role of phonon conduction. Here, by combining the break junction technique with a suspended heat-flux sensor, we measured the total thermal and electrical conductance of a single molecule, at room temperature, together with its Seebeck coefficient. We used this method to extract the figure of merit zT of a tailor-made oligo(phenyleneethynylene)-9,10-anthracenyl molecule with dihydrobenzo[b]thiophene anchoring groups (DHBT-OPE3-An), bridged between gold electrodes. The result is in excellent agreement with predictions from density functional theory and molecular dynamics. This work represents the first measurement, within the same setup, of experimental zT of a single molecule at room temperature and opens new opportunities for the screening of several possible molecules in the light of future thermoelectric applications. The protocol is verified using SAc-OPE3, for which individual measurements for its transport properties exist in the literature.

Molecular Thermoelectricity in EGaIn-Based Molecular Junctions

ConspectusUnderstanding the thermoelectric effects that convert energy between heat and electricity on a molecular scale is of great interest to the nanoscience community. As electronic devices continue to be miniaturized to nanometer scales, thermoregulation on such devices becomes increasingly critical. In addition, the study of molecular thermoelectricity provides information that cannot be accessed through conventional electrical conductance measurements. The field of molecular thermoelectrics aims to explore thermoelectric effects in electrode-molecule-electrode tunnel junctions and draw inferences on how the (supra)molecular structure of active molecules is associated with their thermopower. In this Account, we introduce a convenient and useful junction technique that enables thermovoltage measurements of one molecule thick films, self-assembled monolayers (SAMs), with reliability, and discuss the atomic-detailed structure-thermopower relations established by the technique. The technique relies on a microelectrode composed of non-Newtonian liquid metal, eutectic gallium-indium (EGaIn) covered with a native gallium oxide layer. The EGaIn electrode makes it possible to form thermoelectric contacts with the delicate structure of SAMs in a noninvasive fashion. A defined interface between SAM and the EGaIn electrode allows time-effective collection of large amounts of thermovoltage data, with great reproducibility, efficiency, and reliable interpretation and statistical analysis of the data. We also highlight recent efforts to utilize the EGaIn technique for probing molecular thermoelectricity and structure-thermopower relations. Using the technique, it was possible to unravel quantum-chemical mechanisms of thermoelectric functions, based on the Mott formula, in SAM-based large-area junctions, which in turn led us to set various hypotheses to boost the Seebeck coefficient. By validating the hypotheses again with the EGaIn technique, we revealed that the thermopower of junction increases through the reduction of the energy offset between accessible molecular orbital energy level and Fermi level or the tuning of broadening of the orbital energy level. Such alterations in the shape of energy topography of junction could be achieved through structural modifications in anchoring group and molecular backbone of SAM, and the bottom electrode. Molecular thermoelectrics offers a unique opportunity to build a well-defined nanoscale system and isolate an effect of interest from others, advancing fundamental understanding of charge transport across individual molecules and molecule-electrode interfaces. In the Account, we showed our recent work involving carefully designed molecular system that are relevant to answering the question of how thermopower differs between the tunneling and thermal-hopping regimes. The field of molecular thermoelectrics needs to address practical application-related issues, particularly molecular degradation in thermal environments. In this regard, we summarized the results highlighting the thermal instability of SAM-based junctions based on a traditional thiol anchor group and how to circumvent this problem. We also discussed the power factor (PF)─a practical parameter representing the efficiency for converting heat into electricity─of SAMs, evaluated using the EGaIn technique. In the Conclusion section of this Account, we present future challenges and perspectives.

Organic thermoelectric generators: working principles, materials, and fabrication techniques

Organic thermoelectricity is a blooming field of research that employs organic (semi)conductors to recycle waste heat through its partial conversion to electrical power. Such a conversion occurs by means of organic thermoelectric generator (OTEG) devices. The recent process on the synthesis of novel materials and on the understanding of doping mechanisms to increase conductivity has tremendously narrowed the gap between laboratory research and their application in actual applications. This Feature Article intends to highlight the impressive progress in materials and fabrication techniques for OTEGs made in recent years.

High Seebeck Coefficient Achieved by Multinuclear Organometallic Molecular Junctions

This paper describes the thermoelectric properties of molecular junctions incorporating multinuclear ruthenium alkynyl complexes that comprise Ru(dppe)₂ [dppe = 1,2-bis(diphenylphosphino)ethane] fragments and diethylnyl aromatic bridging ligands with thioether anchors. Using the liquid metal technique, the Seebeck coefficient was examined as a function of metal nuclearity, oxidation state, and substituent on the organic ligand backbone. High Seebeck coefficients up to 73 μV/K and appreciable thermal stability with thermovoltage up to ∼3.3 mV at a heating temperature of 423 K were observed. An unusually high proximity of the highest occupied molecular orbital (HOMO) energy level to the Fermi level was revealed to give the remarkable thermoelectric performance as suggested by combined experiments and calculations. This work offers important insights into the development of molecular-scale devices for efficient thermoregulation and heat-to-electricity conversion.