Genomic and phenotypic analyses of six offspring of a genome-edited hornless bull

Outlook on genome editing application to cattle

In livestock industry, there is growing interest in methods to increase the production efficiency of livestock to address food shortages, given the increasing global population. With the advancements in gene engineering technology, it is a valuable tool and has been intensively utilized in research specifically focused on human disease. In historically, this technology has been used with livestock to create human disease models or to produce recombinant proteins from their byproducts. However, in recent years, utilizing gene editing technology, cattle with identified genes related to productivity can be edited, thereby enhancing productivity in response to climate change or specific disease instead of producing recombinant proteins. Furthermore, with the advancement in the efficiency of gene editing, it has become possible to edit multiple genes simultaneously. This cattle breed improvement has been achieved by discovering the genes through the comprehensive analysis of the entire genome of cattle. The cattle industry has been able to address gene bottlenecks that were previously impossible through conventional breeding systems. This review concludes that gene editing is necessary to expand the cattle industry, improving productivity in the future. Additionally, the enhancement of cattle through gene editing is expected to contribute to addressing environmental challenges associated with the cattle industry. Further research and development in gene editing, coupled with genomic analysis technologies, will significantly contribute to solving issues that conventional breeding systems have not been able to address.

Production of light-coloured, low heat-absorbing Holstein Friesian cattle by precise embryo-mediated genome editing

CONTEXT

Genome editing enables the introduction of beneficial sequence variants into the genomes of animals with high genetic merit in a single generation. This can be achieved by introducing variants into primary cells followed by producing a live animal from these cells by somatic cell nuclear transfer cloning. The latter step is associated with low efficiencies and developmental problems due to incorrect reprogramming of the donor cells, causing animal welfare concerns. Direct editing of fertilised one-cell embryos could circumvent this issue and might better integrate with genetic improvement strategies implemented by the industry.

METHODS

In vitro fertilised zygotes were injected with TALEN editors and repair template to introduce a known coat colour dilution mutation in the PMEL gene. Embryo biopsies of injected embryos were screened by polymerase chain reaction and sequencing for intended biallelic edits before transferring verified embryos into recipients for development to term. Calves were genotyped and their coats scanned with visible and hyperspectral cameras to assess thermal energy absorption.

KEY RESULTS

Multiple non-mosaic calves with precision edited genotypes were produced, including calves from high genetic merit parents. Compared to controls, the edited calves showed a strong coat colour dilution which was associated with lower thermal energy absorbance.

CONCLUSIONS

Although biopsy screening was not absolutely accurate, non-mosaic, precisely edited calves can be readily produced by embryo-mediated editing. The lighter coat colouring caused by the PMEL mutation can lower radiative heat gain which might help to reduce heat stress.

IMPLICATIONS

The study validates putative causative sequence variants to rapidly adapt grazing cattle to changing environmental conditions.

Perspectives in Genome-Editing Techniques for Livestock

Genome editing of farm animals has undeniable practical applications. It helps to improve production traits, enhances the economic value of livestock, and increases disease resistance. Gene-modified animals are also used for biomedical research and drug production and demonstrate the potential to be used as xenograft donors for humans. The recent discovery of site-specific nucleases that allow precision genome editing of a single-cell embryo (or embryonic stem cells) and the development of new embryological delivery manipulations have revolutionized the transgenesis field. These relatively new approaches have already proven to be efficient and reliable for genome engineering and have wide potential for use in agriculture. A number of advanced methodologies have been tested in laboratory models and might be considered for application in livestock animals. At the same time, these methods must meet the requirements of safety, efficiency and availability of their application for a wide range of farm animals. This review aims at covering a brief history of livestock animal genome engineering and outlines possible future directions to design optimal and cost-effective tools for transgenesis in farm species.

Genomics in animal breeding from the perspectives of matrices and molecules

BACKGROUND

This paper describes genomics from two perspectives that are in use in animal breeding and genetics: a statistical perspective concentrating on models for estimating breeding values, and a sequence perspective concentrating on the function of DNA molecules.

MAIN BODY

This paper reviews the development of genomics in animal breeding and speculates on its future from these two perspectives. From the statistical perspective, genomic data are large sets of markers of ancestry; animal breeding makes use of them while remaining agnostic about their function. From the sequence perspective, genomic data are a source of causative variants; what animal breeding needs is to identify and make use of them.

CONCLUSION

The statistical perspective, in the form of genomic selection, is the more applicable in contemporary breeding. Animal genomics researchers using from the sequence perspective are still working towards this the isolation of causative variants, equipped with new technologies but continuing a decades-long line of research.

In it for the long run: perspectives on exploiting long-read sequencing in livestock for population scale studies of structural variants

Studies have demonstrated that structural variants (SV) play a substantial role in the evolution of species and have an impact on Mendelian traits in the genome. However, unlike small variants (< 50 bp), it has been challenging to accurately identify and genotype SV at the population scale using short-read sequencing. Long-read sequencing technologies are becoming competitively priced and can address several of the disadvantages of short-read sequencing for the discovery and genotyping of SV. In livestock species, analysis of SV at the population scale still faces challenges due to the lack of resources, high costs, technological barriers, and computational limitations. In this review, we summarize recent progress in the characterization of SV in the major livestock species, the obstacles that still need to be overcome, as well as the future directions in this growing field. It seems timely that research communities pool resources to build global population-scale long-read sequencing consortiums for the major livestock species for which the application of genomic tools has become cost-effective.

Genome centric engineering using ZFNs, TALENs and CRISPR-Cas9 systems for trait improvement and disease control in Animals

Livestock is an essential life commodity in modern agriculture involving breeding and maintenance. The farming practices have evolved mainly over the last century for commercial outputs, animal welfare, environment friendliness, and public health. Modifying genetic makeup of livestock has been proposed as an effective tool to create farmed animals with characteristics meeting modern farming system goals. The first technique used to produce transgenic farmed animals resulted in random transgene insertion and a low gene transfection rate. Therefore, genome manipulation technologies have been developed to enable efficient gene targeting with a higher accuracy and gene stability. Genome editing (GE) with engineered nucleases-Zinc finger nucleases (ZFNs) and transcription activator-like effector nucleases (TALENs) regulates the targeted genetic alterations to facilitate multiple genomic modifications through protein-DNA binding. The application of genome editors indicates usefulness in reproduction, animal models, transgenic animals, and cell lines. Recently, CRISPR/Cas system, an RNA-dependent genome editing tool (GET), is considered one of the most advanced and precise GE techniques for on-target modifications in the mammalian genome by mediating knock-in (KI) and knock-out (KO) of several genes. Lately, CRISPR/Cas9 tool has become the method of choice for genome alterations in livestock species due to its efficiency and specificity. The aim of this review is to discuss the evolution of engineered nucleases and GETs as a powerful tool for genome manipulation with special emphasis on its applications in improving economic traits and conferring resistance to infectious diseases of animals used for food production, by highlighting the recent trends for maintaining sustainable livestock production.

Japanese Regulatory Framework and Approach for Genome-edited Foods Based on Latest Scientific Findings

The food supply system is facing important challenges and its sustainability has to be considered. Genome-editing technology, which accelerates the development of new variety, could be used to achieve sustainable development goals, thereby protecting the environment and ensuring the stable production of food for an increasing global population. The most widely used genome-editing tool, CRISPR/Cas9, is easy to use, affordable, and versatile. Foods produced by genome-editing technologies have been developed worldwide to create novel traits. In the first half of the review, the latest scientific findings on genome-editing technologies are summarized, and the technical challenge in genome sequence analysis are clarified. CRISPR/Cas9 has versatile alternative techniques, such as base editor and prime editor. Genome sequencing technology has developed rapidly in recent years. However, it is still difficult to detect large deletions and structural variations. Long-read sequencing technology would solve this challenge. In the second part, regulatory framework and approach for genome-edited foods is introduced. The four government ministries, including the Ministry of Environment, the Ministry of Agriculture, Forestry and Fisheries, and the Ministry of Health, Labour and Welfare (MHLW), started to discuss how the regulation should be implemented in 2019. The SDN-1 technique is excluded from the current genetically modified organism (GMO) regulation. The Japanese regulatory framework includes pre-submission consultation and submission of notification form. In the last part of this review, transparency of regulatory framework and consumer confidence were described. Since maintaining consumer trust is vital, transparency of regulatory framework is a key to consumers. The information of notification process on approved genome-edited foods is made public immediately. This review will help regulators build regulatory frameworks, and lead to harmonization of the framework between the countries.

Progress and opportunities through use of genomics in animal production

The rearing of farmed animals is a vital component of global food production systems, but its impact on the environment, human health, animal welfare, and biodiversity is being increasingly challenged. Developments in genetic and genomic technologies have had a key role in improving the productivity of farmed animals for decades. Advances in genome sequencing, annotation, and editing offer a means not only to continue that trend, but also, when combined with advanced data collection, analytics, cloud computing, appropriate infrastructure, and regulation, to take precision livestock farming (PLF) and conservation to an advanced level. Such an approach could generate substantial additional benefits in terms of reducing use of resources, health treatments, and environmental impact, while also improving animal health and welfare.

Evaluation of Reference Genes for Real-Time Quantitative PCR Analysis in Tissues from Bumble Bees (Bombus Terrestris) of Different Lines

Bumble bees are important alternative pollinators and model insects due to their highly developed sociality and colony management. In order to better understand their molecular mechanisms, studies focusing on the genetic and molecular aspects of their development and behavior are needed. Although quantitative real-time polymerase chain reaction (qRT-PCR) can be used to quantify the relative expression of target genes, internal reference genes (which are stably expressed across different lines and tissues) must first be identified to ensure the accurate normalization of target genes. In order to contribute to molecular studies on bumble bees, we used Bombus terrestris to determine the expression stability of eight reference genes (β-actin (ACT), Arginine Kinase (AK), Phospholipase A2 (PLA2), Elongation factor 1 alpha (EF-1), Ribosomal proteins (S5, S18, S28) and glyceraldehyde-3-phosphate dehydrogenase (GAPDH)) in five different lines and several tissues (ovary, thorax, fat body, and head) using RT-qPCR procedures and four analysis programs (RefFinder, NormFinder, BestKeeper, and geNorm). In general, the S28, S5, and S18 ribosomal protein genes and the PLA2 and EF-1 genes showed the highest stability and were therefore identified as suitable reference genes for the bumble bee species and their defined lines and tissues. Our results also emphasized the need to evaluate the stability of candidate reference genes for any differently designed lines and tissue conditions in bumble bee species.

Uncovering Novel Features of the Pc Locus in Horn Development from Gene-Edited Holstein Cattle by RNA-Sequencing Analysis

The Polled Celtic (Pc) mutation locus is a genetically simple single mutation that is the best choice for breeding polled cattle using gene editing. However, the mechanism of the Pc locus for regulating horn development is unclear, so we used gene editing, somatic cell nuclear transfer and embryo transfer to obtain polled Holstein fetal bovine (gestation time 90 days) with a homozygous Pc insertion (gene-edited Holstein fetal bovine, EH) and the wild-type 90 days Holstein fetal bovine (WH) as controls. The hematoxylin-eosin (HE) staining results showed that, compared to the WH, the EH horn buds had no white keratinized projections or vacuolated keratinocytes and no thick nerve bundles under the dermal tissue. Furthermore, DNA sequencing results showed that the Pc locus was homozygously inserted into the fetal bovine genome. A total of 791 differentially expressed genes were identified by transcriptome sequencing analysis. Enrichment analysis and protein interaction analysis results of differentially expressed genes showed that abundant gene changes after Pc insertion were associated with the adhesion molecule regulation, actin expression, cytoskeletal deformation and keratin expression and keratinization. It was also noted that the results contained several genes that had been reported to be associated with the development of horn traits, such as RXFP2 and TWIST1. This study identified these changes for the first time and summarized them. The results suggested that the Pc mutant locus may inhibit neural crest cell EMT generation and keratin expression, leading to failures in neural crest cell migration and keratinization of the horn bud tissue, regulating the production of the polled phenotype.

Domestic Cow-Related Severe Facial Trauma in an Older Farmer Undergoing Anticoagulation Treatment

Domestic cow-related injuries can carry significant morbidity and mortality among livestock farmers. We report a case of an 83-year-old male farmer with severe facial trauma and a potentially compromised airway caused by a domestic dairy cow during his routine work while taking oral anticoagulants. Since head and neck trauma caused by domestic cows can be severe, preventive measures should be taken to protect cattle farmers in those exposed areas.

Cytoplasmic Injection of Zygotes to Genome Edit Naturally Occurring Sequence Variants Into Bovine Embryos

Genome editing provides opportunities to improve current cattle breeding strategies through targeted introduction of natural sequence variants, accelerating genetic gain. This can be achieved by harnessing homology-directed repair mechanisms following editor-induced cleavage of the genome in the presence of a repair template. Introducing the genome editors into zygotes and editing in embryos has the advantage of uncompromised development into live animals and alignment with contemporary embryo-based improvement practices. In our study, we investigated the potential to introduce sequence variants, known from the pre-melanosomal protein 17 (PMEL) and prolactin receptor (PRLR) genes, and produce non-mosaic, edited embryos, completely converted into the precision genotype. Injection of gRNA/Cas9 editors into bovine zygotes to introduce a 3 bp deletion variant into the PMEL gene produced up to 11% fully converted embryos. The conversion rate was increased to up to 48% with the use of TALEN but only when delivered by plasmid. Testing three gRNA/Cas9 editors in the context of several known PRLR sequence variants, different repair template designs and delivery as DNA, RNA or ribonucleoprotein achieved full conversion rates up to 8%. Furthermore, we developed a biopsy-based screening strategy for non-mosaic embryos which has the potential for exclusively producing non-mosaic animals with intended precision edits.

LincRNA#1 knockout alone does not affect polled phenotype in cattle heterozygous for the celtic POLLED allele

A long intergenic non-coding RNA (lincRNA#1) is overexpressed in the horn bud region of polled (hornless) bovine fetuses, suggesting a potential role in horn bud suppression. Genome editing was used to test whether the absence of this sequence was associated with the horned phenotype. Two gRNAs with high mutation efficiencies targeting the 5' and the 3' regions flanking the lincRNA#1 sequence were co-injected with Cas9 as ribonucleoprotein complexes into bovine zygotes (n = 121) 6 h post insemination. Of the resulting blastocysts (n = 31), 84% had the expected 3.7 kb deletion; of these embryos with the 3.7 kb deletions, 88% were biallelic knockouts. Thirty-nine presumptive edited 7-day blastocysts were transferred to 13 synchronized recipient cows resulting in ten pregnancies, five with embryos heterozygous for the dominant P_C POLLED allele at the POLLED locus, and five with the recessive pp genotype. Eight (80%) of the resulting fetuses were biallelic lincRNA#1 knockouts, with the remaining two being mosaic. RT-qPCR analysis was used to confirm the absence of lincRNA#1 expression in knockout fetuses. Phenotypic and histological analysis of the genotypically (P_Cp) POLLED, lincRNA#1 knockout fetuses revealed similar morphology to non-edited, control polled fetuses, indicating the absence of lincRNA#1 alone does not result in a horned phenotype.

The Complex and Diverse Genetic Architecture of the Absence of Horns (Polledness) in Domestic Ruminants, including Goats and Sheep

Horns are the most obvious common feature of Bovidae. The naturally occurring absence of horns in these species, also known as polledness, is of surprisingly heterogeneous nature, although they are Mendelian traits. This review compares in detail the molecular differences among the causes of inherited polledness in the domestic ruminant species of cattle, yak, sheep, and goat based on the causal gene variants that have been discovered in recent years. The genetic causes for the lack of horns in small ruminants seem not only to be more complex, e.g., in sheep, breed-specific characteristics are still unexplained, but in goats, there is also the associated disorder of intersexuality—polled intersex syndrome (PIS). In connection with animal welfare and the associated discussion about a legal ban on the dehorning of all farm animals, naturally hornless animals and the causal genetic variants are of increasing research interest in the age of genome editing. However, the low acceptance of genetic engineering in livestock, especially in European societies, limits its use in food-producing animals. Therefore, genotype-based targeted selection of naturally occurring variants is still a widely used method for spreading this desired trait within and across populations, at least in cattle and sheep.

High-throughput methods for genome editing: the more the better

During the last decade, targeted genome-editing technologies, especially clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein (Cas) technologies, have permitted efficient targeting of genomes, thereby modifying these genomes to offer tremendous opportunities for deciphering gene function and engineering beneficial traits in many biological systems. As a powerful genome-editing tool, the CRISPR/Cas systems, combined with the development of next-generation sequencing and many other high-throughput techniques, have thus been quickly developed into a high-throughput engineering strategy in animals and plants. Therefore, here, we review recent advances in using high-throughput genome-editing technologies in animals and plants, such as the high-throughput design of targeted guide RNA (gRNA), construction of large-scale pooled gRNA, and high-throughput genome-editing libraries, high-throughput detection of editing events, and high-throughput supervision of genome-editing products. Moreover, we outline perspectives for future applications, ranging from medication using gene therapy to crop improvement using high-throughput genome-editing technologies.

A deletion at the polled PC locus alone is not sufficient to cause a polled phenotype in cattle

Dehorning is a common practice in the dairy industry, but raises animal welfare concerns. A naturally occurring genetic mutation (PC allele) comprised of a 212 bp duplicated DNA sequence replacing a 10-bp sequence at the polled locus is associated with the hornless phenotype (polled) in cattle. To test the hypothesis that the 10 bp deletion alone is sufficient to result in polled, a CRISPR-Cas9 dual guide RNA approach was optimized to delete a 133 bp region including the 10 bp sequence. Timing of ribonucleoprotein complex injections at various hours post insemination (hpi) (6, 8, and 18 hpi) as well as in vitro transcribed (IVT) vs synthetic gRNAs were compared. Embryos injected 6 hpi had a significantly higher deletion rate (53%) compared to those injected 8 (12%) and 18 hpi (7%), and synthetic gRNAs had a significantly higher deletion rate (84%) compared to IVT gRNAs (53%). Embryo transfers were performed, and bovine fetuses were harvested between 3 and 5 months of gestation. All fetuses had mutations at the target site, with two of the seven having biallelic deletions, and yet they displayed horn bud development indicating that the 10 bp deletion alone is not sufficient to result in the polled phenotype.

Genetic approaches for increasing fitness in endangered species

The global rate of wildlife extinctions is accelerating, and the persistence of many species requires conservation breeding programs. A central paradigm of these programs is to preserve the genetic diversity of the founder populations. However, this may preserve original characteristics that make them vulnerable to extinction. We introduce targeted genetic intervention (TGI) as an alternative approach that promotes traits that enable species to persist in the face of threats by changing the incidence of alleles that impact on fitness. The TGI toolkit includes methods with established efficacy in model organisms and agriculture but are largely untried for conservation, such as synthetic biology and artificial selection. We explore TGI approaches as a species-restoration tool for intractable threats including infectious disease and climate change.

Holstein Friesian dairy cattle edited for diluted coat color as a potential adaptation to climate change

BACKGROUND

High-producing Holstein Friesian dairy cattle have a characteristic black and white coat, often with large proportions of black. Compared to a light coat color, black absorbs more solar radiation which is a contributing factor to heat stress in cattle. To better adapt dairy cattle to rapidly warming climates, we aimed to lighten their coat color by genome editing.

RESULTS

Using gRNA/Cas9-mediated editing, we introduced a three bp deletion in the pre-melanosomal protein 17 gene (PMEL) proposed as causative variant for the semi-dominant color dilution phenotype observed in Galloway and Highland cattle. Calves generated from cells with homozygous edits revealed a strong color dilution effect. Instead of the characteristic black and white markings of control calves generated from unedited cells, the edited calves displayed a novel grey and white coat pattern.

CONCLUSION

This, for the first time, verified the causative nature of the PMEL mutation for diluting the black coat color in cattle. Although only one of the calves was healthy at birth and later succumbed to a naval infection, the study showed the feasibility of generating such edited animals with the possibility to dissect the effects of the introgressed edit and other interfering allelic variants that might exist in individual cattle and accurately determine the impact of only the three bp change.

A variance component estimation approach to infer associations between Mendelian polledness and quantitative production and female fertility traits in German Simmental cattle

Background

Managing beneficial Mendelian characteristics in dairy cattle breeding programs implies that the correlated genetic effects are considered to avoid possible adverse effects in selection processes. The Mendelian trait polledness in cattle is traditionally associated with the belief that the polled locus has unfavorable effects on breeding goal traits. This may be due to the inferior breeding values of former polled bulls and cows in cattle breeds, such as German Simmental, or to pleiotropic or linkage effects of the polled locus.

Methods

We focused on a variance component estimation approach that uses a marker-based numerator relationship matrix reflecting gametic relationships at the polled locus to test for direct pleiotropic or linked quantitative trait loci (QTL) effects of the polled locus on relevant traits. We applied the approach to performance, health, and female fertility traits in German Simmental cattle.

Results

Our results showed no evidence for any pleiotropic QTL effects of the polled locus on test-day production traits milk yield and fat percentage, on the mastitis indicator ‘somatic cell score’, and on several female fertility traits, i.e. 56 days non return rate, days open and days to first service. We detected a significant and unfavorable QTL effect accounting for 6.6% of the genetic variance for protein percentage only.

Conclusions

Pleiotropy does not explain the lower breeding values and phenotypic inferiority of polled German Simmental sires and cows relative to the horned population in the breed. Thus, intensified selection in the polled population will contribute to increased selection response in breeding goal traits and genetic merit and will narrow the deficit in breeding values for production traits.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12711-021-00652-z.

Screening and validation of genome-edited animals

The emergence of an array of genome-editing tools in recent years has facilitated the introduction of genetic modifications directly into the embryo, increasing the ease, efficiency and catalogue of alleles accessible to researchers across a range of species. Bypassing the requirement for a selection cassette and resulting in a broad range of outcomes besides the desired allele, genome editing has altered the allele validation process both temporally and technically. Whereas traditional gene targeting relies upon selection and allows allele validation at the embryonic stem cell modification stage, screening for the presence of the intended allele now occurs in the (frequently mosaic) founder animals. Final confirmation of the edited allele can only take place at the subsequent G1 generation and the validation strategy must differentiate the desired allele from a range of unintended outcomes. Here we present some of the challenges posed by gene editing, strategies for validation and considerations for animal colony management.

The genomes of precision edited cloned calves show no evidence for off-target events or increased de novo mutagenesis

BACKGROUND

Animal health and welfare are at the forefront of public concern and the agricultural sector is responding by prioritising the selection of welfare-relevant traits in their breeding schemes. In some cases, welfare-enhancing traits such as horn-status (i.e., polled) or diluted coat colour, which could enhance heat tolerance, may not segregate in breeds of primary interest, highlighting gene-editing tools such as the CRISPR-Cas9 technology as an approach to rapidly introduce variation into these populations. A major limitation preventing the acceptance of CRISPR-Cas9 mediated gene-editing, however, is the potential for off-target mutagenesis, which has raised concerns about the safety and ultimate applicability of this technology. Here, we present a clone-based study design that has allowed a detailed investigation of off-target and de novo mutagenesis in a cattle line bearing edits in the PMEL gene for diluted coat-colour.

RESULTS

No off-target events were detected from high depth whole genome sequencing performed in precursor cell-lines and resultant calves cloned from those edited and non-edited cell lines. Long molecule sequencing at the edited site and plasmid-specific PCRs did not reveal structural variations and/or plasmid integration events in edited samples. Furthermore, an in-depth analysis of de novo mutations across the edited and non-edited cloned calves revealed that the mutation frequency and spectra were unaffected by editing status. Cells in culture, however, appeared to have a distinct mutation signature where de novo mutations were predominantly C > A mutations, and in cloned calves they were predominantly T > G mutations, deviating from the expected excess of C > T mutations.

CONCLUSIONS

We found no detectable CRISPR-Cas9 associated off-target mutations in the gene-edited cells or calves derived from the gene-edited cell line. Comparison of de novo mutation in two gene-edited calves and three non-edited control calves did not reveal a higher mutation load in any one group, gene-edited or control, beyond those anticipated from spontaneous mutagenesis. Cell culture and somatic cell nuclear transfer cloning processes contributed the major source of contrast in mutational profile between samples.

Sustainable Food Production: The Contribution of Genome Editing in Livestock

The growing demand for animal source foods to feed people has been pushing the livestock industry to increase productivity, a tendency that will continue throughout this century. The challenge for the coming years is to increase the food supply to ensure equity in access to high quality food, while maintaining global sustainability including combating climate change, avoiding deforestation, and conserving biodiversity, as well as ensuring animal health and welfare. The question is, how do we produce more with less? Classical methods to enhance livestock productivity based on the improvement of animal health, nutrition, genetics, reproductive technologies and management have made important contributions; however, this is not going to be enough and thus disruptive approaches are required. Genome editing with CRISPR may be a powerful contributor to global livestock transformation. This article is focused on the scope and perspectives for the application of this technology, which includes improving production traits, enhancing animal welfare through adaptation and resilience, conferring resistance to infectious diseases, and suppressing pests and invasive species that threaten livestock. The main advantages and concerns that should be overcome by science, policy and people are discussed with the aim that this technology can make a real contribution to our collective future. This review is part of the special issue “Genome Editing in Animal Systems to Support Sustainable Farming and Pest Control”.

25th ANNIVERSARY OF CLONING BY SOMATIC-CELL NUCLEAR TRANSFER: Nuclear transfer and the development of genetically modified/gene edited livestock

The birth and adult development of 'Dolly' the sheep, the first mammal produced by the transfer of a terminally differentiated cell nucleus into an egg, provided unequivocal evidence of nuclear equivalence among somatic cells. This ground-breaking experiment challenged a long-standing dogma of irreversible cellular differentiation that prevailed for over a century and enabled the development of methodologies for reversal of differentiation of somatic cells, also known as nuclear reprogramming. Thanks to this new paradigm, novel alternatives for regenerative medicine in humans, improved animal breeding in domestic animals and approaches to species conservation through reproductive methodologies have emerged. Combined with the incorporation of new tools for genetic modification, these novel techniques promise to (i) transform and accelerate our understanding of genetic diseases and the development of targeted therapies through creation of tailored animal models, (ii) provide safe animal cells, tissues and organs for xenotransplantation, (iii) contribute to the preservation of endangered species, and (iv) improve global food security whilst reducing the environmental impact of animal production. This review discusses recent advances that build on the conceptual legacy of nuclear transfer and – when combined with gene editing – will have transformative potential for medicine, biodiversity and sustainable agriculture. We conclude that the potential of these technologies depends on further fundamental and translational research directed at improving the efficiency and safety of these methods.

CRISPR, animals, and FDA oversight: Building a path to success

Technological advances, such as genome editing and specifically CRISPR, offer exciting promise for the creation of products that address public health concerns, such as disease transmission and a sustainable food supply and enable production of human therapeutics, such as organs and tissues for xenotransplantation or recombinant human proteins to treat disease. The Food and Drug Administration recognizes the need for such innovative solutions and plays a key role in bringing safe and effective animal biotechnology products to the marketplace. In this article, we (the Food and Drug Administration/Center for Veterinary Medicine) describe the current state of the science, including advances in technology as well as scientific limitations and considerations for how researchers and commercial developers working to create intentional genomic alterations in animals can work within these limitations. We also describe our risk-based approach and how it strikes a balance between our regulatory responsibilities and the need to get innovative products to market efficiently. We continue to seek input from our stakeholders and hope to use this feedback to improve the transparency, predictability, and efficiency of our process. We think that working together, using appropriate science- and risk-based oversight, is the foundation to a successful path forward.

Efficient TALEN-mediated gene knockin at the bovine Y chromosome and generation of a sex-reversal bovine

Functional elucidation of bovine Y-chromosome genes requires available genome editing technologies. Meanwhile, it has yet to be proven whether the bovine Sry gene is the main or single factor involved in the development of the male phenotype in bovine. Here, we efficiently knocked out four Y-linked genes (Sry, ZFY, DDX3Y, and EIF2S3Y) in bovine fetal fibroblasts (BFFs) with transcription activator-like effector nucleases (TALENs) individually. Furthermore, we used TALEN-mediated gene knockin at the Sry gene and generated a sex-reversal bovine by somatic cell nuclear transfer (SCNT). The resulting bovine had only one ovary and was sterile. We demonstrate, for the first time, that the Sry gene is an important sex-determining gene in bovine. Our method lays a solid foundation for detecting the biology of the bovine Y chromosome, as it may provide an alternative biological model system for the study of mammalian sex determination, and new methods for the practical application in agricultural, especially for sex predetermination.

Novel functional sequences uncovered through a bovine multiassembly graph

Many genomic analyses start by aligning sequencing reads to a linear reference genome. However, linear reference genomes are imperfect, lacking millions of bases of unknown relevance and are unable to reflect the genetic diversity of populations. This makes reference-guided methods susceptible to reference-allele bias. To overcome such limitations, we build a pangenome from six reference-quality assemblies from taurine and indicine cattle as well as yak. The pangenome contains an additional 70,329,827 bases compared to the Bos taurus reference genome. Our multiassembly approach reveals 30 and 10.1 million bases private to yak and indicine cattle, respectively, and between 3.3 and 4.4 million bases unique to each taurine assembly. Utilizing transcriptomes from 56 cattle, we show that these nonreference sequences encode transcripts that hitherto remained undetected from the B. taurus reference genome. We uncover genes, primarily encoding proteins contributing to immune response and pathogen-mediated immunomodulation, differentially expressed between Mycobacterium bovis-infected and noninfected cattle that are also undetectable in the B. taurus reference genome. Using whole-genome sequencing data of cattle from five breeds, we show that reads which were previously misaligned against the Bos taurus reference genome now align accurately to the pangenome sequences. This enables us to discover 83,250 polymorphic sites that segregate within and between breeds of cattle and capture genetic differentiation across breeds. Our work makes a so-far unused source of variation amenable to genetic investigations and provides methods and a framework for establishing and exploiting a more diverse reference genome.

Opportunities and Challenges for Improving the Productivity of Swamp Buffaloes in Southeastern Asia

The swamp buffalo is a domesticated animal commonly found in Southeast Asia. It is a highly valued agricultural animal for smallholders, but the production of this species has unfortunately declined in recent decades due to rising farm mechanization. While swamp buffalo still plays a role in farmland cultivation, this species' purposes has shifted from draft power to meat, milk, and hide production. The current status of swamp buffaloes in Southeast Asia is still understudied compared to its counterparts such as the riverine buffaloes and cattle. This review discusses the background of swamp buffalo, with an emphasis on recent work on this species in Southeast Asia, and associated genetics and genomics work such as cytogenetic studies, phylogeny, domestication and migration, genetic sequences and resources. Recent challenges to realize the potential of this species in the agriculture industry are also discussed. Limited genetic resource for swamp buffalo has called for more genomics work to be done on this species including decoding its genome. As the economy progresses and farm mechanization increases, research and development for swamp buffaloes are focused on enhancing its productivity through understanding the genetics of agriculturally important traits. The use of genomic markers is a powerful tool to efficiently utilize the potential of this animal for food security and animal conservation. Understanding its genetics and retaining and maximizing its adaptability to harsher environments are a strategic move for food security in poorer nations in Southeast Asia in the face of climate change.

One-step generation of a targeted knock-in calf using the CRISPR-Cas9 system in bovine zygotes

Background

The homologous recombination (HR) pathway is largely inactive in early embryos prior to the first cell division, making it difficult to achieve targeted gene knock-ins. The homology-mediated end joining (HMEJ)-based strategy has been shown to increase knock-in efficiency relative to HR, non-homologous end joining (NHEJ), and microhomology-mediated end joining (MMEJ) strategies in non-dividing cells.

Results

By introducing gRNA/Cas9 ribonucleoprotein complex and a HMEJ-based donor template with 1 kb homology arms flanked by the H11 safe harbor locus gRNA target site, knock-in rates of 40% of a 5.1 kb bovine sex-determining region Y (SRY)-green fluorescent protein (GFP) template were achieved in Bos taurus zygotes. Embryos that developed to the blastocyst stage were screened for GFP, and nine were transferred to recipient cows resulting in a live phenotypically normal bull calf. Genomic analyses revealed no wildtype sequence at the H11 target site, but rather a 26 bp insertion allele, and a complex 38 kb knock-in allele with seven copies of the SRY-GFP template and a single copy of the donor plasmid backbone. An additional minor 18 kb allele was detected that looks to be a derivative of the 38 kb allele resulting from the deletion of an inverted repeat of four copies of the SRY-GFP template.

Conclusion

The allelic heterogeneity in this biallelic knock-in calf appears to have resulted from a combination of homology directed repair, homology independent targeted insertion by blunt-end ligation, NHEJ, and rearrangement following editing of the gRNA target site in the donor template.

This study illustrates the potential to produce targeted gene knock-in animals by direct cytoplasmic injection of bovine embryos with gRNA/Cas9, although further optimization is required to ensure a precise single-copy gene integration event.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-021-07418-3.

Comparison of Gene Editing Versus Conventional Breeding to Introgress the POLLED Allele Into the Tropically Adapted Australian Beef Cattle Population

Dehorning is the process of physically removing horns to protect animals and humans from injury, but the process is costly, unpleasant, and faces increasing public scrutiny. Genetic selection for polled (hornless), which is genetically dominant to horned, is a long-term solution to eliminate the need for dehorning. However, due to the limited number of polled Australian Brahman bulls, the northern Australian beef cattle population remains predominantly horned. The potential to use gene editing to produce high-genetic-merit polled cattle was recently demonstrated. To further explore the concept, this study simulated introgression of the POLLED allele into a tropically adapted Australian beef cattle population via conventional breeding or gene editing (top 1% or 10% of seedstock bulls/year) for 3 polled mating schemes and compared results to baseline selection on genetic merit (Japan Ox selection index, $JapOx) alone, over the course of 20 years. The baseline scenario did not significantly decrease the 20-year HORNED allele frequency (80%), but resulted in one of the fastest rates of genetic gain ($8.00/year). Compared to the baseline, the conventional breeding scenarios where polled bulls were preferentially used for breeding, regardless of their genetic merit, significantly decreased the 20-year HORNED allele frequency (30%), but resulted in a significantly slower rate of genetic gain ($6.70/year, P ≤ 0.05). The mating scheme that required the exclusive use of homozygous polled bulls, resulted in the lowest 20-year HORNED allele frequency (8%), but this conventional breeding scenario resulted in the slowest rate of genetic gain ($5.50/year). The addition of gene editing the top 1% or 10% of seedstock bull calves/year to each conventional breeding scenario resulted in significantly faster rates of genetic gain (up to $8.10/year, P ≤ 0.05). Overall, our study demonstrates that, due to the limited number of polled Australian Brahman bulls, strong selection pressure on polled will be necessary to meaningfully increase the number of polled animals in this population. Moreover, these scenarios illustrate how gene editing could be a tool for accelerating the development of high-genetic-merit homozygous polled sires to mitigate the current trade-off of slower genetic gain associated with decreasing HORNED allele frequency in the Australian Brahman population.

Anticipating and Identifying Collateral Damage in Genome Editing

Genome editing has powerful applications in research, healthcare, and agriculture. However, the range of possible molecular events resulting from genome editing has been underestimated and the technology remains unpredictable on, and away from, the target locus. This has considerable impact in providing a safe approach for therapeutic genome editing, agriculture, and other applications. This opinion article discusses how to anticipate and detect those editing events by a combination of assays to capture all possible genomic changes. It also discusses strategies for preventing unwanted effects, critical to appraise the benefit or risk associated with the use of the technology. Anticipating and verifying the result of genome editing are essential for the success for all applications.

Generation of myostatin edited horse embryos using CRISPR/Cas9 technology and somatic cell nuclear transfer

The application of new technologies for gene editing in horses may allow the generation of improved sportive individuals. Here, we aimed to knock out the myostatin gene (MSTN), a negative regulator of muscle mass development, using CRISPR/Cas9 and to generate edited embryos for the first time in horses. We nucleofected horse fetal fibroblasts with 1, 2 or 5 µg of 2 different gRNA/Cas9 plasmids targeting the first exon of MSTN. We observed that increasing plasmid concentrations improved mutation efficiency. The average efficiency was 63.6% for gRNA1 (14/22 edited clonal cell lines) and 96.2% for gRNA2 (25/26 edited clonal cell lines). Three clonal cell lines were chosen for embryo generation by somatic cell nuclear transfer: one with a monoallelic edition, one with biallelic heterozygous editions and one with a biallelic homozygous edition, which rendered edited blastocysts in each case. Both MSTN editions and off-targets were analyzed in the embryos. In conclusion, CRISPR/Cas9 proved an efficient method to edit the horse genome in a dose dependent manner with high specificity. Adapting this technology sport advantageous alleles could be generated, and a precision breeding program could be developed.

CRISPR/Cas12a mediated knock-in of the Polled Celtic variant to produce a polled genotype in dairy cattle

In modern livestock farming horned cattle pose an increased risk of injury for each other as well as for the farmers. Dehorning without anesthesia is associated with stress and pain for the calves and raises concerns regarding animal welfare. Naturally occurring structural variants causing polledness are known for most beef cattle but are rare within the dairy cattle population. The most common structural variant in beef cattle consists of a 202 base pair insertion-deletion (Polled Celtic variant). For the generation of polled offspring from a horned Holstein-Friesian bull, we isolated the Polled Celtic variant from the genome of an Angus cow and integrated it into the genome of fibroblasts taken from the horned bull using the CRISPR/Cas12a system (formerly Cpf1). Modified fibroblasts served as donor cells for somatic cell nuclear transfer and reconstructed embryos were transferred into synchronized recipients. One resulting pregnancy was terminated on day 90 of gestation for the examination of the fetus. Macroscopic and histological analyses proved a polled phenotype. The remaining pregnancy was carried to term and delivered one calf with a polled phenotype which died shortly after birth. In conclusion, we successfully demonstrated the practical application of CRISPR/Cas12a in farm animal breeding and husbandry.

Efficient correction of a deleterious point mutation in primary horse fibroblasts with CRISPR-Cas9

Phenotypic selection during animal domestication has resulted in unwanted incorporation of deleterious mutations. In horses, the autosomal recessive condition known as Glycogen Branching Enzyme Deficiency (GBED) is the result of one of these deleterious mutations (102C > A), in the first exon of the GBE1 gene (GBE1102C>A). With recent advances in genome editing, this type of genetic mutation can be precisely repaired. In this study, we used the RNA-guided nuclease CRISPR-Cas9 (clustered regularly-interspaced short palindromic repeats/CRISPR-associated protein 9) to correct the GBE1102C>A mutation in a primary fibroblast cell line derived from a high genetic merit heterozygous stallion. To correct this mutation by homologous recombination (HR), we designed a series of single guide RNAs (sgRNAs) flanking the mutation and provided different single-stranded donor DNA templates. The distance between the Cas9-mediated double-stranded break (DSB) to the mutation site, rather than DSB efficiency, was the primary determinant for successful HR. This framework can be used for targeting other harmful diseases in animal populations.

How to turn an organism into a model organism in 10 'easy' steps

Many of the major biological discoveries of the 20th century were made using just six species: Escherichia coli bacteria, Saccharomyces cerevisiae and Schizosaccharomyces pombe yeast, Caenorhabditis elegans nematodes, Drosophila melanogaster flies and Mus musculus mice. Our molecular understanding of the cell division cycle, embryonic development, biological clocks and metabolism were all obtained through genetic analysis using these species. Yet the 'big 6' did not start out as genetic model organisms (hereafter 'model organisms'), so how did they mature into such powerful systems? First, these model organisms are abundant human commensals: they are the bacteria in our gut, the yeast in our beer and bread, the nematodes in our compost pile, the flies in our kitchen and the mice in our walls. Because of this, they are cheaply, easily and rapidly bred in the laboratory and in addition were amenable to genetic analysis. How and why should we add additional species to this roster? We argue that specialist species will reveal new secrets in important areas of biology and that with modern technological innovations like next-generation sequencing and CRISPR-Cas9 genome editing, the time is ripe to move beyond the big 6. In this review, we chart a 10-step path to this goal, using our own experience with the Aedes aegypti mosquito, which we built into a model organism for neurobiology in one decade. Insights into the biology of this deadly disease vector require that we work with the mosquito itself rather than modeling its biology in another species.

The coding loci of evolution and domestication: current knowledge and implications for bio-inspired genome editing

One promising application of CRISPR/Cas9 is to create targeted mutations to introduce traits of interest into domesticated organisms. However, a major current limitation for crop and livestock improvement is to identify the precise genes and genetic changes that must be engineered to obtain traits of interest. Here, we discuss the advantages of bio-inspired genome editing, i.e. the engineered introduction of natural mutations that have already been associated with traits of interest in other lineages (breeds, populations or species). To obtain a landscape view of potential targets for genome editing, we used Gephebase (www.gephebase.org), a manually curated database compiling published data about the genes responsible for evolutionary and domesticated changes across eukaryotes, and examined the &gt;1200 mutations that have been identified in the coding regions of more than 700 genes in animals, plants and yeasts. We observe that our genetic knowledge is relatively important for certain traits, such as xenobiotic resistance, and poor for others. We also note that protein-null alleles, often owing to nonsense and frameshift mutations, represent a large fraction of the known loci of domestication (42% of identified coding mutations), compared with intraspecific (27%) and interspecific evolution (11%). Although this trend may be subject to detection, publication and curation biases, it is consistent with the idea that breeders have selected large-effect mutations underlying adaptive traits in specific settings, but that these mutations and associated phenotypes would not survive the vagaries of changing external and internal environments. Our compilation of the loci of evolution and domestication uncovers interesting options for bio-inspired and transgene-free genome editing.